From eef595aa649a10ed475c902bc072a1f3e419a480 Mon Sep 17 00:00:00 2001
From: AndySze <andy.sze.mail@gmail.com>
Date: Wed, 22 Jul 2015 17:35:02 +0800
Subject: [PATCH] add makerlab mega controller pin configs

---
 Marlin/boards.h              |   1 +
 Marlin/pins.h                |   2 +
 Marlin/pins_MEGACONTROLLER.h | 132 +++++++++++++++++++++++++++++++++++
 3 files changed, 135 insertions(+)
 create mode 100644 Marlin/pins_MEGACONTROLLER.h

diff --git a/Marlin/boards.h b/Marlin/boards.h
index f6eae66c0..f6bbc9d67 100644
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@@ -49,6 +49,7 @@
 #define BOARD_OMCA              91   // Final OMCA board
 #define BOARD_RAMBO             301  // Rambo
 #define BOARD_MINIRAMBO         302  // Mini-Rambo
+#define BOARD_MEGACONTROLLER    310  // Mega controller
 #define BOARD_ELEFU_3           21   // Elefu Ra Board (v3)
 #define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
 #define BOARD_LEAPFROG          999  // Leapfrog
diff --git a/Marlin/pins.h b/Marlin/pins.h
index 867384243..2182ba5c9 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -118,6 +118,8 @@
   #include "pins_MKS_BASE.h"
 #elif MB(RIGIDBOARD)
   #include "pins_RIGIDBOARD.h"
+#elif MB(MEGACONTROLLER)
+  #include "pins_MEGACONTROLLER.h"
 #elif MB(99)
   #include "pins_99.h"
 #else
diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h
new file mode 100644
index 000000000..391067275
--- /dev/null
+++ b/Marlin/pins_MEGACONTROLLER.h
@@ -0,0 +1,132 @@
+/**
+ * Mega controller pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#if EXTRUDERS > 3
+  #error RUMBA supports up to 3 extruders. Comment this line to keep going.
+#endif
+ #define X_STEP_PIN 62//A8
+ #define X_DIR_PIN 63//A9
+ #define X_ENABLE_PIN 61//A7
+#ifdef DELTA
+ #define X_MIN_PIN -1
+#else
+ #define X_MIN_PIN 43
+#endif //DELTA
+ #define X_MAX_PIN 42 //2 //Max endstops default to disabled "-1", set to commented value to enable.
+
+ #define Y_STEP_PIN 65 // A11
+ #define Y_DIR_PIN 66 // A12
+ #define Y_ENABLE_PIN 64//A10
+#ifdef DELTA
+ #define Y_MIN_PIN -1
+#else
+ #define Y_MIN_PIN 38
+#endif //DELTA
+ #define Y_MAX_PIN 41 //15
+
+ #define Z_STEP_PIN 68 // A14
+ #define Z_DIR_PIN 69 // A15
+ #define Z_ENABLE_PIN 67 // A13
+ #define Z_MIN_PIN 40
+ #define Z_MAX_PIN 37
+
+ #define E0_STEP_PIN 23
+ #define E0_DIR_PIN 24
+ #define E0_ENABLE_PIN 22
+
+ #define E1_STEP_PIN 26
+ #define E1_DIR_PIN 27
+ #define E1_ENABLE_PIN 25
+
+ #define SDPOWER -1
+ #define SDSS 53
+ #define LED_PIN 13
+
+ #define FAN_PIN 39
+ #define FAN1_PIN 35
+ #define FAN2_PIN 36
+ #define FAN_SOFT_PWM
+ #define CONTROLLERFAN_PIN 36
+ #define PS_ON_PIN -1
+ #define KILL_PIN -1
+
+ #define HEATER_0_PIN 29 // EXTRUDER 1
+ #define HEATER_1_PIN 34 // EXTRUDER 2
+ #define HEATER_2_PIN -1
+
+ #if TEMP_SENSOR_0 == -1
+   #define TEMP_0_PIN 4 // ANALOG NUMBERING
+ #else
+   #define TEMP_0_PIN 0 // ANALOG NUMBERING
+ #endif
+
+
+ #if TEMP_SENSOR_1 == -1
+   #define TEMP_1_PIN 5 // ANALOG NUMBERING
+ #else
+   #define TEMP_1_PIN 2 // ANALOG NUMBERING
+ #endif
+
+ #define TEMP_2_PIN 3 // ANALOG NUMBERING
+
+ #define HEATER_BED_PIN 28 // BED
+
+ #if TEMP_SENSOR_BED == -1
+   #define TEMP_BED_PIN 6 // ANALOG NUMBERING
+ #else
+   #define TEMP_BED_PIN 1 // ANALOG NUMBERING
+ #endif
+ 
+ #ifdef NUM_SERVOS
+    #define SERVO0_PIN         30
+
+    #if NUM_SERVOS > 1
+      #define SERVO1_PIN         31
+    #endif
+
+    #if NUM_SERVOS > 2
+      #define SERVO2_PIN         32
+    #endif
+
+    #if NUM_SERVOS > 3
+      #define SERVO3_PIN         33
+    #endif
+  #endif
+
+ #ifdef MINIPANEL
+     #define BEEPER 46
+     // Pins for DOGM SPI LCD Support
+     #define DOGLCD_A0  47
+     #define DOGLCD_CS  45
+     #define LCD_PIN_BL 44  // backlight LED on PA3
+     
+     #define KILL_PIN 12
+     // GLCD features
+     //#define LCD_CONTRAST 190
+     // Uncomment screen orientation
+       // #define LCD_SCREEN_ROT_90
+       // #define LCD_SCREEN_ROT_180
+       // #define LCD_SCREEN_ROT_270
+     //The encoder and click button
+     #define BTN_EN1 48
+     #define BTN_EN2 11
+     #define BTN_ENC 10  //the click switch
+     //not connected to a pin
+     #define SDCARDDETECT 49
+ #endif //Minipanel
+
+
+   //encoder rotation values
+ #define encrot0 0
+ #define encrot1 2
+ #define encrot2 3
+ #define encrot3 1
+
+
+#define SERVO0_PIN         5
+