From f19fd642ced1bbff6d16d7c71d03ebc153493617 Mon Sep 17 00:00:00 2001 From: Roxy-3D Date: Tue, 13 Nov 2018 13:48:35 -0600 Subject: [PATCH] Updates to Formbot T-Rex 2+ configuration files (#12422) Updates to Formbot T-Rex 2+ configuration files --- .../examples/Formbot/T_Rex_2+/Configuration.h | 56 +++++++------- .../Formbot/T_Rex_2+/Configuration_adv.h | 74 +++++-------------- .../examples/Formbot/T_Rex_2+/_Bootscreen.h | 1 + 3 files changed, 49 insertions(+), 82 deletions(-) diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h index fbf0d71fc..e4b1540df 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -157,6 +157,17 @@ // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE +#if ENABLED(SINGLENOZZLE) + // Parameters for filament retract / prime on toolchange + #define SINGLENOZZLE_SWAP_LENGTH 12 // (mm) + #define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m) + #define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m) + //#define SINGLENOZZLE_SWAP_PARK + #if ENABLED(SINGLENOZZLE_SWAP_PARK) + #define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } + #define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m) + #endif +#endif /** * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. @@ -242,6 +253,9 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle +//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle #ifdef ROXYs_TRex #define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis @@ -665,7 +679,6 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** @@ -673,7 +686,6 @@ * Override with M203 * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] */ -//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 } /** @@ -692,11 +704,6 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ - -//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - #define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves @@ -709,11 +716,6 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define DEFAULT_XJERK 20.0 -//#define DEFAULT_YJERK 10.0 -//#define DEFAULT_ZJERK 0.4 -//#define DEFAULT_EJERK 5.0 - #define DEFAULT_XJERK 12.0 // More conservitive numbers. #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.4 @@ -801,6 +803,7 @@ //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif + // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE @@ -846,7 +849,7 @@ #define MIN_PROBE_EDGE 0 // X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 7000 +#define XY_PROBE_SPEED 5000 // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z @@ -876,7 +879,7 @@ #define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 7 // Z position after probing is done +#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -970,11 +973,11 @@ #define Z_MIN_POS 0 #define X_MAX_POS 450 #define Y_MAX_POS Y_BED_SIZE -#if ENABLED(tallVersion) - #define Z_MAX_POS 700 -#else - #define Z_MAX_POS 500 -#endif +#define Z_MAX_POS 700 + + +// Z raise distance for tool-change, as needed for some extruders +#define TOOLCHANGE_ZRAISE 2 // (mm) /** * Software Endstops @@ -1110,7 +1113,7 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 208.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. #endif @@ -1206,9 +1209,9 @@ //#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +//#define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1249,8 +1252,8 @@ #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_X_POINT (((X_BED_SIZE) / 2) - 15) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT (((Y_BED_SIZE) / 2) - 15) // Y point for Z homing when homing all axes (G28). #endif // Homing speeds (mm/m) @@ -1260,6 +1263,7 @@ // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS + // @section calibrate /** @@ -1484,7 +1488,7 @@ * * View the current statistics with M78. */ -#define PRINTCOUNTER +//#define PRINTCOUNTER //============================================================================= //============================= LCD and SD support ============================ diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 99d011bc0..158c8020f 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -219,7 +219,7 @@ * * Define one or both of these to override the default 0-255 range. */ -#define FAN_MIN_PWM 64 +#define FAN_MIN_PWM 45 //#define FAN_MAX_PWM 128 // @section extruder @@ -365,12 +365,12 @@ */ #define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage - #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage - #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage - #define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops // without modifying the firmware (through the "M218 T1 X???" command). @@ -433,6 +433,7 @@ #define Z_STEPPER_ALIGN_ACC 0.02 #endif + // @section machine #define AXIS_RELATIVE_MODES {false, false, false, false} @@ -513,6 +514,7 @@ //#define MICROSTEP16 LOW,LOW,HIGH //#define MICROSTEP32 HIGH,LOW,HIGH + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] @@ -590,7 +592,7 @@ // Add an 'M73' G-code to set the current percentage #define LCD_SET_PROGRESS_MANUALLY -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS +#if HAS_PRINT_PROGRESS //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar @@ -1061,7 +1063,7 @@ * 'M106 P T2' : Use the set secondary speed * 'M106 P T1' : Restore the previous fan speed */ -#define EXTRA_FAN_SPEED +//#define EXTRA_FAN_SPEED /** * Firmware-based and LCD-controlled retract @@ -1097,34 +1099,6 @@ //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously #endif #endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - /** * Advanced Pause * Experimental feature for filament change support and for parking the nozzle when paused. @@ -1162,19 +1136,19 @@ // until extrusion is consistent, and to purge old filament. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_RETRACT_LENGTH 0 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 500 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 1 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -1694,18 +1668,6 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - /** * User-defined menu items that execute custom GCode */ @@ -1851,7 +1813,7 @@ #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. + #define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) // connector at: right=0 bottom=-90 top=90 left=180 #define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h index c2333ed4c..5c055874e 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/_Bootscreen.h @@ -33,6 +33,7 @@ #define CUSTOM_BOOTSCREEN_TIMEOUT 2500 #define CUSTOM_BOOTSCREEN_BMPWIDTH 128 +#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64 const unsigned char custom_start_bmp[] PROGMEM = { B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,