Revert "untestest commit, so I don't loose code.. features runout prevention addons"

This reverts commit 651cde8b98.
This commit is contained in:
Bernhard 2011-12-22 09:22:22 +01:00
parent 651cde8b98
commit f312216e97
4 changed files with 25 additions and 80 deletions

View file

@ -248,7 +248,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define SLOWDOWN #define SLOWDOWN
//default stepper release if idle //default stepper release if idle
#define DEFAULT_STEPPER_DEACTIVE_TIME 1200 #define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DEFAULT_STEPPER_DEACTIVE_COMMAND "M84 X Y E" //z stays powered #define DEFAULT_STEPPER_DEACTIVE_COMMAND "M84 X Y E" //z stays powered

View file

@ -176,10 +176,8 @@ const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
//Inactivity shutdown variables //Inactivity shutdown variables
static unsigned long previous_millis_cmd = 0; static unsigned long previous_millis_cmd = 0;
static unsigned long previous_millis_runoutprevent = 0; static unsigned long max_inactive_time = 0;
//static unsigned long previous_millis_beep = 0; static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000;
static unsigned long max_inactive_time=0;
static unsigned long stepper_inactive_time = 0;
static unsigned long last_stepperdisabled_time=30*1000; //first release check after 30 seconds static unsigned long last_stepperdisabled_time=30*1000; //first release check after 30 seconds
static unsigned long starttime=0; static unsigned long starttime=0;
@ -245,10 +243,6 @@ void setup()
fromsd[i] = false; fromsd[i] = false;
} }
max_inactive_time = DEFAULT_MAX_INACTIVE_TIME*1000;
stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000;
EEPROM_RetrieveSettings(); // loads data from EEPROM if available EEPROM_RetrieveSettings(); // loads data from EEPROM if available
for(int8_t i=0; i < NUM_AXIS; i++) for(int8_t i=0; i < NUM_AXIS; i++)
@ -421,7 +415,6 @@ FORCE_INLINE void get_command()
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLN(time); SERIAL_ECHOLN(time);
LCD_MESSAGE(time); LCD_MESSAGE(time);
st_synchronize();
card.printingHasFinished(); card.printingHasFinished();
card.checkautostart(true); card.checkautostart(true);
@ -1207,34 +1200,11 @@ void prepare_arc_move(char isclockwise) {
void manage_inactivity(byte debug) void manage_inactivity(byte debug)
{ {
unsigned long curtime=millis(); if( (millis()-previous_millis_cmd) > max_inactive_time )
SERIAL_ECHO_START;
SERIAL_ECHO("MS");
SERIAL_ECHO(millis());
SERIAL_ECHO(" PREV_CMD");
SERIAL_ECHO(previous_millis_cmd);
SERIAL_ECHO(" maxinactive");
SERIAL_ECHOLN(max_inactive_time );
if( (curtime-previous_millis_cmd) > max_inactive_time )
if(max_inactive_time) if(max_inactive_time)
{
LCD_MESSAGEPGM("Bored Shutdown.");
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Bored Shutdown.");
kill(); kill();
}
if( (curtime-previous_millis_cmd) > DEFAULT_MAX_HOT_TIME*1000 )
if(DEFAULT_MAX_HOT_TIME && (degHotend0()>HOTTEMP) )
{
LCD_MESSAGEPGM("Hot too long.");
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Hot too long");
disable_heater();
}
if(stepper_inactive_time) if(stepper_inactive_time)
if( (curtime-last_stepperdisabled_time) > stepper_inactive_time ) if( (millis()-last_stepperdisabled_time) > stepper_inactive_time )
{ {
if(previous_millis_cmd>last_stepperdisabled_time) if(previous_millis_cmd>last_stepperdisabled_time)
last_stepperdisabled_time=previous_millis_cmd; last_stepperdisabled_time=previous_millis_cmd;
@ -1246,16 +1216,8 @@ void manage_inactivity(byte debug)
} }
} }
#ifdef EXTRUDER_RUNOUT_PREVENT #ifdef EXTRUDER_RUNOUT_PREVENT
if(!blocks_queued()) if( (millis()-previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 )
if( (curtime-previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP)
{
if(previous_millis_cmd>previous_millis_runoutprevent)
{
previous_millis_runoutprevent=previous_millis_cmd;
}
if(degHotend0()>EXTRUDER_RUNOUT_MINTEMP)
if((curtime-previous_millis_runoutprevent) > EXTRUDER_RUNOUT_SECONDS*1000)
{ {
bool oldstatus=READ(E_ENABLE_PIN); bool oldstatus=READ(E_ENABLE_PIN);
enable_e(); enable_e();
@ -1267,17 +1229,11 @@ void manage_inactivity(byte debug)
current_position[E_AXIS]=oldepos; current_position[E_AXIS]=oldepos;
destination[E_AXIS]=oldedes; destination[E_AXIS]=oldedes;
plan_set_e_position(oldepos); plan_set_e_position(oldepos);
previous_millis_cmd=millis();
while(current_block!=NULL || blocks_queued()) //enquecommand(DEFAULT_STEPPER_DEACTIVE_COMMAND);
{ st_synchronize();
manage_heater();
LCD_STATUS;
}
previous_millis_runoutprevent=millis();
WRITE(E_ENABLE_PIN,oldstatus); WRITE(E_ENABLE_PIN,oldstatus);
} }
}
#endif #endif
check_axes_activity(); check_axes_activity();
} }
@ -1291,7 +1247,7 @@ void kill()
disable_z(); disable_z();
disable_e(); disable_e();
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); //Turn powersupply off if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Printer halted. kill() called !!"); SERIAL_ERRORLNPGM("Printer halted. kill() called !!");
LCD_MESSAGEPGM("KILLED. "); LCD_MESSAGEPGM("KILLED. ");

View file

@ -706,21 +706,15 @@ void st_init()
sei(); sei();
} }
#include "util/delay.h"
// Block until all buffered steps are executed // Block until all buffered steps are executed
void st_synchronize() void st_synchronize()
{ {
while(current_block!=NULL || blocks_queued()) { while( blocks_queued()) {
manage_heater(); manage_heater();
manage_inactivity(1); manage_inactivity(1);
LCD_STATUS; LCD_STATUS;
//_delay_ms(100);
;
} }
// _delay_ms(250);_delay_ms(250);_delay_ms(250);_delay_ms(250);
// _delay_ms(250);_delay_ms(250);_delay_ms(250);_delay_ms(250);
// _delay_ms(250);_delay_ms(250);_delay_ms(250);_delay_ms(250);
// _delay_ms(250);_delay_ms(250);_delay_ms(250);_delay_ms(250);
} }
void st_set_position(const long &x, const long &y, const long &z, const long &e) void st_set_position(const long &x, const long &y, const long &z, const long &e)

View file

@ -451,11 +451,6 @@ void setWatch()
void disable_heater() void disable_heater()
{ {
for(int i=0;i<EXTRUDERS;i++)
setTargetHotend(0,i);
setTargetBed(0);
#if TEMP_0_PIN > -1 #if TEMP_0_PIN > -1
target_raw[0]=0; target_raw[0]=0;
#if HEATER_0_PIN > -1 #if HEATER_0_PIN > -1