From 871f92378cbdf3520306ca55bd42586f505e87fe Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 18:41:13 -0500 Subject: [PATCH 1/8] Tweak headings in EEPROM structure --- Marlin/configuration_store.cpp | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 2177d41ba..8cea0784d 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -67,27 +67,27 @@ * Global Leveling: * 219 z_fade_height (float) * - * Mesh bed leveling: 43 bytes + * MESH_BED_LEVELING: 43 bytes * 223 M420 S from mbl.status (bool) * 224 mbl.z_offset (float) * 228 GRID_MAX_POINTS_X (uint8_t) * 229 GRID_MAX_POINTS_Y (uint8_t) * 230 G29 S3 XYZ z_values[][] (float x9, up to float x 81) +288 * - * AUTO BED LEVELING 4 bytes + * HAS_BED_PROBE: 4 bytes * 266 M851 zprobe_zoffset (float) * - * ABL_PLANAR (or placeholder): 36 bytes + * ABL_PLANAR: 36 bytes * 270 planner.bed_level_matrix (matrix_3x3 = float x9) * - * AUTO_BED_LEVELING_BILINEAR (or placeholder): 47 bytes + * AUTO_BED_LEVELING_BILINEAR: 47 bytes * 306 GRID_MAX_POINTS_X (uint8_t) * 307 GRID_MAX_POINTS_Y (uint8_t) * 308 bilinear_grid_spacing (int x2) * 312 G29 L F bilinear_start (int x2) * 316 bed_level_grid[][] (float x9, up to float x256) +988 * - * DELTA (if deltabot): 48 bytes + * DELTA: 48 bytes * 348 M666 XYZ endstop_adj (float x3) * 360 M665 R delta_radius (float) * 364 M665 L delta_diagonal_rod (float) @@ -99,7 +99,7 @@ * 388 M665 J delta_tower_angle_trim[B] (float) * 392 M665 K delta_tower_angle_trim[C] (float) * - * Z_DUAL_ENDSTOPS (if not deltabot): 48 bytes + * Z_DUAL_ENDSTOPS: 48 bytes * 348 M666 Z z_endstop_adj (float) * --- dummy data (float x11) * @@ -136,7 +136,7 @@ * 533 M200 D volumetric_enabled (bool) * 534 M200 T D filament_size (float x5) (T0..3) * - * TMC2130 Stepper Current: 20 bytes + * HAVE_TMC2130: 20 bytes * 554 M906 X stepperX current (uint16_t) * 556 M906 Y stepperY current (uint16_t) * 558 M906 Z stepperZ current (uint16_t) From b956f2642b99359573188885e67af88f5a876eb4 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 23:24:30 -0500 Subject: [PATCH 2/8] Show M503 report with current linear units --- Marlin/configuration_store.cpp | 317 +++++++++++++++++---------------- 1 file changed, 167 insertions(+), 150 deletions(-) diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 8cea0784d..9b82a5882 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -1165,6 +1165,13 @@ void MarlinSettings::reset() { #define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START; }while(0) + #if ENABLED(INCH_MODE_SUPPORT) + extern float linear_unit_factor; + #define LINEAR_UNIT(N) ((N) / linear_unit_factor) + #else + #define LINEAR_UNIT(N) N + #endif + /** * M503 - Report current settings in RAM * @@ -1172,113 +1179,168 @@ void MarlinSettings::reset() { */ void MarlinSettings::report(bool forReplay) { + /** + * Announce current units, in case inches are being displayed + */ CONFIG_ECHO_START; + #if ENABLED(INCH_MODE_SUPPORT) + extern float linear_unit_factor, volumetric_unit_factor; + #define LINEAR_UNIT(N) ((N) / linear_unit_factor) + #define VOLUMETRIC_UNIT(N) ((N) / (volumetric_enabled ? volumetric_unit_factor : linear_unit_factor)) + serialprintPGM(linear_unit_factor == 1.0 ? PSTR(" G21 ; Units in mm\n") : PSTR(" G20 ; Units in inches\n")); + #else + #define LINEAR_UNIT(N) N + #define VOLUMETRIC_UNIT(N) N + SERIAL_ECHOLNPGM(" G21 ; Units in mm\n"); + #endif + SERIAL_EOL; + + /** + * Volumetric extrusion M200 + */ + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOPGM("Filament settings:"); + if (volumetric_enabled) + SERIAL_EOL; + else + SERIAL_ECHOLNPGM(" Disabled"); + } + + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 D", filament_size[0]); + SERIAL_EOL; + #if EXTRUDERS > 1 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); + SERIAL_EOL; + #if EXTRUDERS > 2 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); + SERIAL_EOL; + #if EXTRUDERS > 3 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); + SERIAL_EOL; + #if EXTRUDERS > 4 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]); + SERIAL_EOL; + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + + if (!volumetric_enabled) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM(" M200 D0"); + } if (!forReplay) { - SERIAL_ECHOLNPGM("Steps per unit:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Steps per unit:"); } - SERIAL_ECHOPAIR(" M92 X", planner.axis_steps_per_mm[X_AXIS]); - SERIAL_ECHOPAIR(" Y", planner.axis_steps_per_mm[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", planner.axis_steps_per_mm[Z_AXIS]); + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.axis_steps_per_mm[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.axis_steps_per_mm[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.axis_steps_per_mm[Z_AXIS])); #if DISABLED(DISTINCT_E_FACTORS) - SERIAL_ECHOPAIR(" E", planner.axis_steps_per_mm[E_AXIS]); + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS])); #endif SERIAL_EOL; #if ENABLED(DISTINCT_E_FACTORS) + CONFIG_ECHO_START; for (uint8_t i = 0; i < E_STEPPERS; i++) { SERIAL_ECHOPAIR(" M92 T", (int)i); - SERIAL_ECHOLNPAIR(" E", planner.axis_steps_per_mm[E_AXIS + i]); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS + i])); } #endif - CONFIG_ECHO_START; - if (!forReplay) { - SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Maximum feedrates (units/s):"); } - SERIAL_ECHOPAIR(" M203 X", planner.max_feedrate_mm_s[X_AXIS]); - SERIAL_ECHOPAIR(" Y", planner.max_feedrate_mm_s[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", planner.max_feedrate_mm_s[Z_AXIS]); + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.max_feedrate_mm_s[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_feedrate_mm_s[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_feedrate_mm_s[Z_AXIS])); #if DISABLED(DISTINCT_E_FACTORS) - SERIAL_ECHOPAIR(" E", planner.max_feedrate_mm_s[E_AXIS]); + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS])); #endif SERIAL_EOL; #if ENABLED(DISTINCT_E_FACTORS) + CONFIG_ECHO_START; for (uint8_t i = 0; i < E_STEPPERS; i++) { SERIAL_ECHOPAIR(" M203 T", (int)i); - SERIAL_ECHOLNPAIR(" E", planner.max_feedrate_mm_s[E_AXIS + i]); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS + i])); } #endif - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Maximum Acceleration (units/s2):"); } - SERIAL_ECHOPAIR(" M201 X", planner.max_acceleration_mm_per_s2[X_AXIS]); - SERIAL_ECHOPAIR(" Y", planner.max_acceleration_mm_per_s2[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", planner.max_acceleration_mm_per_s2[Z_AXIS]); + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Z_AXIS])); #if DISABLED(DISTINCT_E_FACTORS) - SERIAL_ECHOPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS]); + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS])); #endif SERIAL_EOL; #if ENABLED(DISTINCT_E_FACTORS) + SERIAL_ECHO_START; for (uint8_t i = 0; i < E_STEPPERS; i++) { SERIAL_ECHOPAIR(" M201 T", (int)i); - SERIAL_ECHOLNPAIR(" E", planner.max_acceleration_mm_per_s2[E_AXIS + i]); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS + i])); } #endif - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Accelerations: P=printing, R=retract and T=travel"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Acceleration (units/s2): P R T"); } - SERIAL_ECHOPAIR(" M204 P", planner.acceleration); - SERIAL_ECHOPAIR(" R", planner.retract_acceleration); - SERIAL_ECHOPAIR(" T", planner.travel_acceleration); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.acceleration)); + SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.retract_acceleration)); + SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.travel_acceleration)); - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Advanced: S T B X Z E"); } - SERIAL_ECHOPAIR(" M205 S", planner.min_feedrate_mm_s); - SERIAL_ECHOPAIR(" T", planner.min_travel_feedrate_mm_s); + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M205 S", LINEAR_UNIT(planner.min_feedrate_mm_s)); + SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.min_travel_feedrate_mm_s)); SERIAL_ECHOPAIR(" B", planner.min_segment_time); - SERIAL_ECHOPAIR(" X", planner.max_jerk[X_AXIS]); - SERIAL_ECHOPAIR(" Y", planner.max_jerk[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", planner.max_jerk[Z_AXIS]); - SERIAL_ECHOPAIR(" E", planner.max_jerk[E_AXIS]); - SERIAL_EOL; + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])); + SERIAL_ECHOLNPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS])); #if HAS_M206_COMMAND - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Home offset (mm)"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Home offset:"); } - SERIAL_ECHOPAIR(" M206 X", home_offset[X_AXIS]); - SERIAL_ECHOPAIR(" Y", home_offset[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", home_offset[Z_AXIS]); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS])); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS])); #endif #if HOTENDS > 1 - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Hotend offsets (mm)"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Hotend offsets:"); } + CONFIG_ECHO_START; for (uint8_t e = 1; e < HOTENDS; e++) { SERIAL_ECHOPAIR(" M218 T", (int)e); - SERIAL_ECHOPAIR(" X", hotend_offset[X_AXIS][e]); - SERIAL_ECHOPAIR(" Y", hotend_offset[Y_AXIS][e]); + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e])); #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER) - SERIAL_ECHOPAIR(" Z", hotend_offset[Z_AXIS][e]); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e])); #endif SERIAL_EOL; } @@ -1287,12 +1349,13 @@ void MarlinSettings::reset() { #if ENABLED(MESH_BED_LEVELING) if (!forReplay) { - SERIAL_ECHOLNPGM("Mesh Bed Leveling:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Mesh Bed Leveling:"); } + CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M420 S", mbl.has_mesh() ? 1 : 0); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - SERIAL_ECHOLNPAIR(" Z", planner.z_fade_height); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height)); #endif SERIAL_EOL; for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { @@ -1301,7 +1364,7 @@ void MarlinSettings::reset() { SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1); SERIAL_ECHOPAIR(" Y", (int)py + 1); SERIAL_ECHOPGM(" Z"); - SERIAL_PROTOCOL_F(mbl.z_values[px][py], 5); + SERIAL_PROTOCOL_F(LINEAR_UNIT(mbl.z_values[px][py]), 5); SERIAL_EOL; } } @@ -1309,12 +1372,13 @@ void MarlinSettings::reset() { #elif ENABLED(AUTO_BED_LEVELING_UBL) if (!forReplay) { - SERIAL_ECHOLNPGM("Unified Bed Leveling:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Unified Bed Leveling:"); } + CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M420 S", ubl.state.active ? 1 : 0); //#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - // SERIAL_ECHOLNPAIR(" Z", ubl.state.g29_correction_fade_height); + // SERIAL_ECHOPAIR(" Z", ubl.state.g29_correction_fade_height); //#endif SERIAL_EOL; @@ -1351,72 +1415,69 @@ void MarlinSettings::reset() { #elif HAS_ABL if (!forReplay) { - SERIAL_ECHOLNPGM("Auto Bed Leveling:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Auto Bed Leveling:"); } + CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M420 S", planner.abl_enabled ? 1 : 0); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - SERIAL_ECHOLNPAIR(" Z", planner.z_fade_height); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height)); #endif SERIAL_EOL; #endif #if ENABLED(DELTA) - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Endstop adjustment (mm):"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Endstop adjustment:"); } - SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS]); - SERIAL_ECHOPAIR(" Y", endstop_adj[Y_AXIS]); - SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS]); - SERIAL_EOL; CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(endstop_adj[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(endstop_adj[Y_AXIS])); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(endstop_adj[Z_AXIS])); if (!forReplay) { - SERIAL_ECHOLNPGM("Delta settings: L=diagonal_rod, R=radius, H=height, S=segments_per_second, ABC=diagonal_rod_trim_tower_[123]"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Delta settings: L R H S ABC"); } - SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod); - SERIAL_ECHOPAIR(" R", delta_radius); - SERIAL_ECHOPAIR(" H", DELTA_HEIGHT + home_offset[Z_AXIS]); + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod)); + SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius)); + SERIAL_ECHOPAIR(" H", LINEAR_UNIT(DELTA_HEIGHT + home_offset[Z_AXIS])); SERIAL_ECHOPAIR(" S", delta_segments_per_second); - SERIAL_ECHOPAIR(" A", delta_diagonal_rod_trim[A_AXIS]); - SERIAL_ECHOPAIR(" B", delta_diagonal_rod_trim[B_AXIS]); - SERIAL_ECHOPAIR(" C", delta_diagonal_rod_trim[C_AXIS]); - SERIAL_ECHOPAIR(" I", delta_tower_angle_trim[A_AXIS]); - SERIAL_ECHOPAIR(" J", delta_tower_angle_trim[B_AXIS]); - SERIAL_ECHOPAIR(" K", delta_tower_angle_trim[C_AXIS]); - SERIAL_EOL; + SERIAL_ECHOPAIR(" A", LINEAR_UNIT(delta_diagonal_rod_trim[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_diagonal_rod_trim[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(delta_diagonal_rod_trim[C_AXIS])); + SERIAL_ECHOPAIR(" I", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS])); + SERIAL_ECHOPAIR(" J", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS])); + SERIAL_ECHOLNPAIR(" K", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])); #elif ENABLED(Z_DUAL_ENDSTOPS) - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Z2 Endstop adjustment (mm):"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Z2 Endstop adjustment:"); } - SERIAL_ECHOPAIR(" M666 Z", z_endstop_adj); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M666 Z", LINEAR_UNIT(z_endstop_adj)); #endif // DELTA #if ENABLED(ULTIPANEL) - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Material heatup parameters:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Material heatup parameters:"); } + CONFIG_ECHO_START; for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) { SERIAL_ECHOPAIR(" M145 S", (int)i); SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]); SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]); - SERIAL_ECHOPAIR(" F", lcd_preheat_fan_speed[i]); - SERIAL_EOL; + SERIAL_ECHOLNPAIR(" F", lcd_preheat_fan_speed[i]); } #endif // ULTIPANEL #if HAS_PID_HEATING - CONFIG_ECHO_START; if (!forReplay) { + CONFIG_ECHO_START; SERIAL_ECHOLNPGM("PID settings:"); } #if ENABLED(PIDTEMP) @@ -1462,113 +1523,69 @@ void MarlinSettings::reset() { #endif // PIDTEMP || PIDTEMPBED #if HAS_LCD_CONTRAST - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("LCD Contrast:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("LCD Contrast:"); } - SERIAL_ECHOPAIR(" M250 C", lcd_contrast); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M250 C", lcd_contrast); #endif #if ENABLED(FWRETRACT) - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Retract: S F Z"); } - SERIAL_ECHOPAIR(" M207 S", retract_length); - #if EXTRUDERS > 1 - SERIAL_ECHOPAIR(" W", retract_length_swap); - #endif - SERIAL_ECHOPAIR(" F", MMS_TO_MMM(retract_feedrate_mm_s)); - SERIAL_ECHOPAIR(" Z", retract_zlift); - SERIAL_EOL; CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(retract_length)); + #if EXTRUDERS > 1 + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_length_swap)); + #endif + SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_feedrate_mm_s))); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(retract_zlift)); + if (!forReplay) { - SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Recover: S F"); } - SERIAL_ECHOPAIR(" M208 S", retract_recover_length); - #if EXTRUDERS > 1 - SERIAL_ECHOPAIR(" W", retract_recover_length_swap); - #endif - SERIAL_ECHOPAIR(" F", MMS_TO_MMM(retract_recover_feedrate_mm_s)); - SERIAL_EOL; CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(retract_recover_length)); + #if EXTRUDERS > 1 + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_recover_length_swap)); + #endif + SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_recover_feedrate_mm_s))); + if (!forReplay) { + CONFIG_ECHO_START; SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries"); - CONFIG_ECHO_START; } - SERIAL_ECHOPAIR(" M209 S", autoretract_enabled ? 1 : 0); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M209 S", autoretract_enabled ? 1 : 0); #endif // FWRETRACT - /** - * Volumetric extrusion M200 - */ - if (!forReplay) { - CONFIG_ECHO_START; - SERIAL_ECHOPGM("Filament settings:"); - if (volumetric_enabled) - SERIAL_EOL; - else - SERIAL_ECHOLNPGM(" Disabled"); - } - - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M200 D", filament_size[0]); - SERIAL_EOL; - #if EXTRUDERS > 1 - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); - SERIAL_EOL; - #if EXTRUDERS > 2 - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); - SERIAL_EOL; - #if EXTRUDERS > 3 - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); - SERIAL_EOL; - #if EXTRUDERS > 4 - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]); - SERIAL_EOL; - #endif // EXTRUDERS > 4 - #endif // EXTRUDERS > 3 - #endif // EXTRUDERS > 2 - #endif // EXTRUDERS > 1 - - if (!volumetric_enabled) { - CONFIG_ECHO_START; - SERIAL_ECHOLNPGM(" M200 D0"); - } - /** * Auto Bed Leveling */ #if HAS_BED_PROBE - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); } - SERIAL_ECHOPAIR(" M851 Z", zprobe_zoffset); - SERIAL_EOL; + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M851 Z", LINEAR_UNIT(zprobe_zoffset)); #endif /** * TMC2130 stepper driver current */ #if ENABLED(HAVE_TMC2130) - CONFIG_ECHO_START; if (!forReplay) { - SERIAL_ECHOLNPGM("Stepper driver current:"); CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Stepper driver current:"); } + CONFIG_ECHO_START; SERIAL_ECHO(" M906"); #if ENABLED(X_IS_TMC2130) SERIAL_ECHOPAIR(" X", stepperX.getCurrent()); From 69dfa54a848c0809d36866f0dc30831f7ea4dd4a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 21:55:17 -0500 Subject: [PATCH 3/8] Use code_value_linear_units for known-linear axes --- Marlin/Marlin_main.cpp | 132 ++++++++++++++++++++--------------------- 1 file changed, 64 insertions(+), 68 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 9c9aec50b..2e92982ef 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1285,19 +1285,19 @@ inline bool code_value_bool() { return !code_has_value() || code_value_byte() > volumetric_unit_factor = pow(linear_unit_factor, 3.0); } - inline float axis_unit_factor(int axis) { + inline float axis_unit_factor(const AxisEnum axis) { return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); } inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; } - inline float code_value_axis_units(int axis) { return code_value_float() * axis_unit_factor(axis); } - inline float code_value_per_axis_unit(int axis) { return code_value_float() / axis_unit_factor(axis); } + inline float code_value_axis_units(const AxisEnum axis) { return code_value_float() * axis_unit_factor(axis); } + inline float code_value_per_axis_unit(const AxisEnum axis) { return code_value_float() / axis_unit_factor(axis); } #else - inline float code_value_linear_units() { return code_value_float(); } - inline float code_value_axis_units(int axis) { UNUSED(axis); return code_value_float(); } - inline float code_value_per_axis_unit(int axis) { UNUSED(axis); return code_value_float(); } + #define code_value_linear_units() code_value_float() + #define code_value_axis_units(A) code_value_float() + #define code_value_per_axis_unit(A) code_value_float() #endif @@ -3063,7 +3063,7 @@ static void homeaxis(const AxisEnum axis) { void gcode_get_destination() { LOOP_XYZE(i) { if (code_seen(axis_codes[i])) - destination[i] = code_value_axis_units(i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0); + destination[i] = code_value_axis_units((AxisEnum)i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0); else destination[i] = current_position[i]; } @@ -3232,7 +3232,7 @@ inline void gcode_G0_G1( float arc_offset[2] = { 0.0, 0.0 }; if (code_seen('R')) { - const float r = code_value_axis_units(X_AXIS), + const float r = code_value_linear_units(), x1 = current_position[X_AXIS], y1 = current_position[Y_AXIS], x2 = destination[X_AXIS], y2 = destination[Y_AXIS]; if (r && (x2 != x1 || y2 != y1)) { @@ -3248,8 +3248,8 @@ inline void gcode_G0_G1( } } else { - if (code_seen('I')) arc_offset[X_AXIS] = code_value_axis_units(X_AXIS); - if (code_seen('J')) arc_offset[Y_AXIS] = code_value_axis_units(Y_AXIS); + if (code_seen('I')) arc_offset[X_AXIS] = code_value_linear_units(); + if (code_seen('J')) arc_offset[Y_AXIS] = code_value_linear_units(); } if (arc_offset[0] || arc_offset[1]) { @@ -3302,10 +3302,10 @@ inline void gcode_G4() { gcode_get_destination(); const float offset[] = { - code_seen('I') ? code_value_axis_units(X_AXIS) : 0.0, - code_seen('J') ? code_value_axis_units(Y_AXIS) : 0.0, - code_seen('P') ? code_value_axis_units(X_AXIS) : 0.0, - code_seen('Q') ? code_value_axis_units(Y_AXIS) : 0.0 + code_seen('I') ? code_value_linear_units() : 0.0, + code_seen('J') ? code_value_linear_units() : 0.0, + code_seen('P') ? code_value_linear_units() : 0.0, + code_seen('Q') ? code_value_linear_units() : 0.0 }; plan_cubic_move(offset); @@ -4023,7 +4023,7 @@ inline void gcode_G28() { } if (code_seen('Z')) { - mbl.z_values[px][py] = code_value_axis_units(Z_AXIS); + mbl.z_values[px][py] = code_value_linear_units(); } else { SERIAL_CHAR('Z'); say_not_entered(); @@ -4033,7 +4033,7 @@ inline void gcode_G28() { case MeshSetZOffset: if (code_seen('Z')) { - mbl.z_offset = code_value_axis_units(Z_AXIS); + mbl.z_offset = code_value_linear_units(); } else { SERIAL_CHAR('Z'); say_not_entered(); @@ -4305,7 +4305,7 @@ inline void gcode_G28() { #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) - zoffset = code_seen('Z') ? code_value_axis_units(Z_AXIS) : 0; + zoffset = code_seen('Z') ? code_value_linear_units() : 0; #endif @@ -4313,10 +4313,10 @@ inline void gcode_G28() { xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED); - left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION); - right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION); - front_probe_bed_position = code_seen('F') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION); - back_probe_bed_position = code_seen('B') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION); + left_probe_bed_position = code_seen('L') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION); + right_probe_bed_position = code_seen('R') ? (int)code_value_linear_units() : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION); + front_probe_bed_position = code_seen('F') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION); + back_probe_bed_position = code_seen('B') ? (int)code_value_linear_units() : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION); const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X), left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE), @@ -4927,8 +4927,8 @@ inline void gcode_G28() { * S = Stows the probe if 1 (default=1) */ inline void gcode_G30() { - float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER, - Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER; + float X_probe_location = code_seen('X') ? code_value_linear_units() : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER, + Y_probe_location = code_seen('Y') ? code_value_linear_units() : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER; float pos[XYZ] = { X_probe_location, Y_probe_location, LOGICAL_Z_POSITION(0) }; if (!position_is_reachable(pos, true)) return; @@ -5431,13 +5431,13 @@ inline void gcode_G92() { LOOP_XYZE(i) { if (code_seen(axis_codes[i])) { #if IS_SCARA - current_position[i] = code_value_axis_units(i); + current_position[i] = code_value_axis_units((AxisEnum)i); if (i != E_AXIS) didXYZ = true; #else #if HAS_POSITION_SHIFT - float p = current_position[i]; + const float p = current_position[i]; #endif - float v = code_value_axis_units(i); + float v = code_value_axis_units((AxisEnum)i); current_position[i] = v; @@ -6078,7 +6078,7 @@ inline void gcode_M42() { bool stow_probe_after_each = code_seen('E'); - float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : X_current + X_PROBE_OFFSET_FROM_EXTRUDER; + float X_probe_location = code_seen('X') ? code_value_linear_units() : X_current + X_PROBE_OFFSET_FROM_EXTRUDER; #if DISABLED(DELTA) if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) { out_of_range_error(PSTR("X")); @@ -6086,7 +6086,7 @@ inline void gcode_M42() { } #endif - float Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER; + float Y_probe_location = code_seen('Y') ? code_value_linear_units() : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER; #if DISABLED(DELTA) if (!WITHIN(Y_probe_location, LOGICAL_Y_POSITION(MIN_PROBE_Y), LOGICAL_Y_POSITION(MAX_PROBE_Y))) { out_of_range_error(PSTR("Y")); @@ -7063,7 +7063,7 @@ inline void gcode_M92() { LOOP_XYZE(i) { if (code_seen(axis_codes[i])) { if (i == E_AXIS) { - float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER); + const float value = code_value_per_axis_unit(E_AXIS + TARGET_EXTRUDER); if (value < 20.0) { float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. planner.max_jerk[E_AXIS] *= factor; @@ -7250,7 +7250,7 @@ inline void gcode_M121() { endstops.enable_globally(false); } RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); // Lift Z axis - const float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : + const float z_lift = code_seen('Z') ? code_value_linear_units() : #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 FILAMENT_CHANGE_Z_ADD #else @@ -7264,12 +7264,12 @@ inline void gcode_M121() { endstops.enable_globally(false); } } // Move XY axes to filament change position or given position - destination[X_AXIS] = code_seen('X') ? code_value_axis_units(X_AXIS) : 0 + destination[X_AXIS] = code_seen('X') ? code_value_linear_units() : 0 #ifdef FILAMENT_CHANGE_X_POS + FILAMENT_CHANGE_X_POS #endif ; - destination[Y_AXIS] = code_seen('Y') ? code_value_axis_units(Y_AXIS) : 0 + destination[Y_AXIS] = code_seen('Y') ? code_value_linear_units() : 0 #ifdef FILAMENT_CHANGE_Y_POS + FILAMENT_CHANGE_Y_POS #endif @@ -7355,10 +7355,6 @@ inline void gcode_M200() { if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA; } } - else { - //reserved for setting filament diameter via UFID or filament measuring device - return; - } calculate_volumetric_multipliers(); } @@ -7374,7 +7370,7 @@ inline void gcode_M201() { LOOP_XYZE(i) { if (code_seen(axis_codes[i])) { const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); - planner.max_acceleration_mm_per_s2[a] = code_value_axis_units(a); + planner.max_acceleration_mm_per_s2[a] = code_value_axis_units((AxisEnum)a); } } // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) @@ -7384,7 +7380,7 @@ inline void gcode_M201() { #if 0 // Not used for Sprinter/grbl gen6 inline void gcode_M202() { LOOP_XYZE(i) { - if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units(i) * planner.axis_steps_per_mm[i]; + if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units((AxisEnum)i) * planner.axis_steps_per_mm[i]; } } #endif @@ -7402,7 +7398,7 @@ inline void gcode_M203() { LOOP_XYZE(i) if (code_seen(axis_codes[i])) { const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); - planner.max_feedrate_mm_s[a] = code_value_axis_units(a); + planner.max_feedrate_mm_s[a] = code_value_axis_units((AxisEnum)a); } } @@ -7449,10 +7445,10 @@ inline void gcode_M205() { if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units(); if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units(); if (code_seen('B')) planner.min_segment_time = code_value_millis(); - if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_axis_units(X_AXIS); - if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_axis_units(Y_AXIS); - if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_axis_units(Z_AXIS); - if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_axis_units(E_AXIS); + if (code_seen('X')) planner.max_jerk[X_AXIS] = code_value_linear_units(); + if (code_seen('Y')) planner.max_jerk[Y_AXIS] = code_value_linear_units(); + if (code_seen('Z')) planner.max_jerk[Z_AXIS] = code_value_linear_units(); + if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_linear_units(); } #if HAS_M206_COMMAND @@ -7463,11 +7459,11 @@ inline void gcode_M205() { inline void gcode_M206() { LOOP_XYZ(i) if (code_seen(axis_codes[i])) - set_home_offset((AxisEnum)i, code_value_axis_units(i)); + set_home_offset((AxisEnum)i, code_value_linear_units()); #if ENABLED(MORGAN_SCARA) - if (code_seen('T')) set_home_offset(A_AXIS, code_value_axis_units(A_AXIS)); // Theta - if (code_seen('P')) set_home_offset(B_AXIS, code_value_axis_units(B_AXIS)); // Psi + if (code_seen('T')) set_home_offset(A_AXIS, code_value_linear_units()); // Theta + if (code_seen('P')) set_home_offset(B_AXIS, code_value_linear_units()); // Psi #endif SYNC_PLAN_POSITION_KINEMATIC(); @@ -7517,7 +7513,7 @@ inline void gcode_M205() { #endif LOOP_XYZ(i) { if (code_seen(axis_codes[i])) { - endstop_adj[i] = code_value_axis_units(i); + endstop_adj[i] = code_value_linear_units(); #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPAIR("endstop_adj[", axis_codes[i]); @@ -7539,7 +7535,7 @@ inline void gcode_M205() { * M666: For Z Dual Endstop setup, set z axis offset to the z2 axis. */ inline void gcode_M666() { - if (code_seen('Z')) z_endstop_adj = code_value_axis_units(Z_AXIS); + if (code_seen('Z')) z_endstop_adj = code_value_linear_units(); SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj); } @@ -7558,7 +7554,7 @@ inline void gcode_M205() { inline void gcode_M207() { if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS); if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS)); - if (code_seen('Z')) retract_zlift = code_value_axis_units(Z_AXIS); + if (code_seen('Z')) retract_zlift = code_value_linear_units(); #if EXTRUDERS > 1 if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS); #endif @@ -7631,11 +7627,11 @@ inline void gcode_M211() { inline void gcode_M218() { if (get_target_extruder_from_command(218) || target_extruder == 0) return; - if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_axis_units(X_AXIS); - if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_axis_units(Y_AXIS); + if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_linear_units(); + if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_linear_units(); #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER) - if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_axis_units(Z_AXIS); + if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_linear_units(); #endif SERIAL_ECHO_START; @@ -8285,11 +8281,11 @@ void quickstop_stepper() { int8_t px = 0, py = 0; float z = 0; bool hasX, hasY, hasZ, hasI, hasJ; - if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_axis_units(X_AXIS)); - if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_axis_units(Y_AXIS)); - if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); - if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); - if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); + if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_linear_units()); + if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_linear_units()); + if ((hasI = code_seen('I'))) px = code_value_linear_units(); + if ((hasJ = code_seen('J'))) py = code_value_linear_units(); + if ((hasZ = code_seen('Z'))) z = code_value_linear_units(); if (hasX && hasY && hasZ) { @@ -8325,9 +8321,9 @@ void quickstop_stepper() { int8_t px = 0, py = 0; float z = 0; bool hasI, hasJ, hasZ; - if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS); - if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS); - if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS); + if ((hasI = code_seen('I'))) px = code_value_linear_units(); + if ((hasJ = code_seen('J'))) py = code_value_linear_units(); + if ((hasZ = code_seen('Z'))) z = code_value_linear_units(); if (hasI && hasJ && hasZ) { if (WITHIN(px, 0, GRID_MAX_POINTS_X - 1) && WITHIN(py, 0, GRID_MAX_POINTS_X - 1)) { @@ -8474,7 +8470,7 @@ inline void gcode_M503() { SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " "); if (code_seen('Z')) { - const float value = code_value_axis_units(Z_AXIS); + const float value = code_value_linear_units(); if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { zprobe_zoffset = value; refresh_zprobe_zoffset(); @@ -8557,7 +8553,7 @@ inline void gcode_M503() { RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE); // Lift Z axis - float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) : + float z_lift = code_seen('Z') ? code_value_linear_units() : #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0 FILAMENT_CHANGE_Z_ADD #else @@ -8572,12 +8568,12 @@ inline void gcode_M503() { } // Move XY axes to filament exchange position - if (code_seen('X')) destination[X_AXIS] = code_value_axis_units(X_AXIS); + if (code_seen('X')) destination[X_AXIS] = code_value_linear_units(); #ifdef FILAMENT_CHANGE_X_POS else destination[X_AXIS] = FILAMENT_CHANGE_X_POS; #endif - if (code_seen('Y')) destination[Y_AXIS] = code_value_axis_units(Y_AXIS); + if (code_seen('Y')) destination[Y_AXIS] = code_value_linear_units(); #ifdef FILAMENT_CHANGE_Y_POS else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS; #endif @@ -8766,7 +8762,7 @@ inline void gcode_M503() { case DXC_AUTO_PARK_MODE: break; case DXC_DUPLICATION_MODE: - if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_axis_units(X_AXIS), X2_MIN_POS - x_home_pos(0)); + if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_linear_units(), X2_MIN_POS - x_home_pos(0)); if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff(); SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); @@ -9127,7 +9123,7 @@ inline void gcode_M355() { * */ inline void gcode_M163() { - int mix_index = code_seen('S') ? code_value_int() : 0; + const int mix_index = code_seen('S') ? code_value_int() : 0; if (mix_index < MIXING_STEPPERS) { float mix_value = code_seen('P') ? code_value_float() : 0.0; NOLESS(mix_value, 0.0); @@ -9144,7 +9140,7 @@ inline void gcode_M355() { * */ inline void gcode_M164() { - int tool_index = code_seen('S') ? code_value_int() : 0; + const int tool_index = code_seen('S') ? code_value_int() : 0; if (tool_index < MIXING_VIRTUAL_TOOLS) { normalize_mix(); for (uint8_t i = 0; i < MIXING_STEPPERS; i++) @@ -9542,7 +9538,7 @@ inline void gcode_T(uint8_t tmp_extruder) { tool_change( tmp_extruder, - code_seen('F') ? MMM_TO_MMS(code_value_axis_units(X_AXIS)) : 0.0, + code_seen('F') ? MMM_TO_MMS(code_value_linear_units()) : 0.0, (tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool()) ); From eb2d073daef83a4a8203910613fd418fd320fbd1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 18:42:05 -0500 Subject: [PATCH 4/8] Add M905 R for setting the E/D ratio directly --- Marlin/Marlin_main.cpp | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 2e92982ef..748646596 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -8797,28 +8797,34 @@ inline void gcode_M503() { #if ENABLED(LIN_ADVANCE) /** - * M905: Set advance factor + * M905: Set and/or Get advance K factor and WH/D ratio + * + * K Set advance K factor + * R Set ratio directly (overrides WH/D) + * W H D Set ratio from WH/D */ inline void gcode_M905() { stepper.synchronize(); - const float newK = code_seen('K') ? code_value_float() : -1, - newD = code_seen('D') ? code_value_float() : -1, - newW = code_seen('W') ? code_value_float() : -1, - newH = code_seen('H') ? code_value_float() : -1; + const float newK = code_seen('K') ? code_value_float() : -1; + if (newK >= 0) planner.set_extruder_advance_k(newK); - if (newK >= 0.0) planner.set_extruder_advance_k(newK); + float newR = code_seen('R') ? code_value_float() : -1; + if (newR < 0) { + const float newD = code_seen('D') ? code_value_float() : -1, + newW = code_seen('W') ? code_value_float() : -1, + newH = code_seen('H') ? code_value_float() : -1; + if (newD >= 0 && newW >= 0 && newH >= 0) + newR = newD ? (newW * newH) / (sq(newD * 0.5) * M_PI) : 0; + } + if (newR >= 0) planner.set_advance_ed_ratio(newR); SERIAL_ECHO_START; - SERIAL_ECHOLNPAIR("Advance factor: ", planner.get_extruder_advance_k()); - - if (newD >= 0 || newW >= 0 || newH >= 0) { - const float ratio = (!newD || !newW || !newH) ? 0 : (newW * newH) / (sq(newD * 0.5) * M_PI); - planner.set_advance_ed_ratio(ratio); - SERIAL_ECHO_START; - SERIAL_ECHOPGM("E/D ratio: "); - if (ratio) SERIAL_ECHOLN(ratio); else SERIAL_ECHOLNPGM("Automatic"); - } + SERIAL_ECHOPAIR("Advance K=", planner.get_extruder_advance_k()); + SERIAL_ECHOPGM(" E/D="); + const float ratio = planner.get_advance_ed_ratio(); + ratio ? SERIAL_ECHO(ratio) : SERIAL_ECHOPGM("Auto"); + SERIAL_EOL; } #endif // LIN_ADVANCE From f8e77d65454722b843e53c6ac71bb25806bd4361 Mon Sep 17 00:00:00 2001 From: Thomas Moore Date: Sat, 15 Apr 2017 22:18:10 -0500 Subject: [PATCH 5/8] Add Linear Advance values to EEPROM and enable configuration of K via LCD --- Marlin/configuration_store.cpp | 55 +++++++++++++++++++-- Marlin/planner.h | 5 +- Marlin/ultralcd.cpp | 90 +++++++++++++++++++++++++--------- Marlin/ultralcd_impl_DOGM.h | 42 +++++++++------- Marlin/ultralcd_impl_HD44780.h | 43 ++++++++-------- 5 files changed, 168 insertions(+), 67 deletions(-) diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 9b82a5882..ced713b80 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -36,7 +36,7 @@ * */ -#define EEPROM_VERSION "V34" +#define EEPROM_VERSION "V35" // Change EEPROM version if these are changed: #define EEPROM_OFFSET 100 @@ -149,8 +149,12 @@ * 572 M906 E3 stepperE3 current (uint16_t) * 576 M906 E4 stepperE4 current (uint16_t) * - * 580 Minimum end-point - * 1901 (580 + 36 + 9 + 288 + 988) Maximum end-point + * LIN_ADVANCE: 8 bytes + * 580 M905 K extruder_advance_k (float) + * 584 M905 WHD advance_ed_ratio (float) + * + * 588 Minimum end-point + * 1909 (588 + 36 + 9 + 288 + 988) Maximum end-point */ #include "configuration_store.h" @@ -570,6 +574,20 @@ void MarlinSettings::postprocess() { for (uint8_t q = 0; q < 11; ++q) EEPROM_WRITE(val); #endif + // + // Linear Advance + // + + float extruder_advance_k = 0.0f, advance_ed_ratio = 0.0f; + + #if ENABLED(LIN_ADVANCE) + extruder_advance_k = planner.get_extruder_advance_k(); + advance_ed_ratio = planner.get_advance_ed_ratio(); + #endif + + EEPROM_WRITE(extruder_advance_k); + EEPROM_WRITE(advance_ed_ratio); + if (!eeprom_write_error) { const uint16_t final_checksum = eeprom_checksum, @@ -900,6 +918,19 @@ void MarlinSettings::postprocess() { for (uint8_t q = 0; q < 11; q++) EEPROM_READ(val); #endif + // + // Linear Advance + // + + float extruder_advance_k, advance_ed_ratio; + EEPROM_READ(extruder_advance_k); + EEPROM_READ(advance_ed_ratio); + + #if ENABLED(LIN_ADVANCE) + planner.set_extruder_advance_k(extruder_advance_k); + planner.set_advance_ed_ratio(advance_ed_ratio); + #endif + if (eeprom_checksum == stored_checksum) { if (eeprom_read_error) reset(); @@ -1155,6 +1186,11 @@ void MarlinSettings::reset() { #endif #endif + #if ENABLED(LIN_ADVANCE) + planner.set_extruder_advance_k(LIN_ADVANCE_K); + planner.set_advance_ed_ratio(LIN_ADVANCE_E_D_RATIO); + #endif + postprocess(); SERIAL_ECHO_START; @@ -1619,6 +1655,19 @@ void MarlinSettings::reset() { #endif SERIAL_EOL; #endif + + /** + * Linear Advance + */ + #if ENABLED(LIN_ADVANCE) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Linear Advance:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M905 K", planner.get_extruder_advance_k()); + SERIAL_ECHOLNPAIR(" R", planner.get_advance_ed_ratio()); + #endif } #endif // !DISABLE_M503 diff --git a/Marlin/planner.h b/Marlin/planner.h index 4bd350c74..1df52205e 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -267,9 +267,10 @@ class Planner { #endif #if ENABLED(LIN_ADVANCE) - static void set_extruder_advance_k(const float &k) { extruder_advance_k = k; }; + static void set_extruder_advance_k(float k) { extruder_advance_k = k; }; static float get_extruder_advance_k() { return extruder_advance_k; }; - static void set_advance_ed_ratio(const float &ratio) { advance_ed_ratio = ratio; }; + static void set_advance_ed_ratio(float ratio) { advance_ed_ratio = ratio; }; + static float get_advance_ed_ratio() { return advance_ed_ratio; }; #endif /** diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 13dc7cbe8..264d13549 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -143,7 +143,7 @@ uint16_t max_display_update_time = 0; void lcd_control_temperature_preheat_material1_settings_menu(); void lcd_control_temperature_preheat_material2_settings_menu(); void lcd_control_motion_menu(); - void lcd_control_volumetric_menu(); + void lcd_control_filament_menu(); #if ENABLED(DAC_STEPPER_CURRENT) void dac_driver_commit(); @@ -198,26 +198,31 @@ uint16_t max_display_update_time = 0; void menu_action_submenu(screenFunc_t data); void menu_action_gcode(const char* pgcode); void menu_action_function(screenFunc_t data); + + #define DECLARE_MENU_EDIT_TYPE(_type, _name) \ + bool _menu_edit_ ## _name(); \ + void menu_edit_ ## _name(); \ + void menu_edit_callback_ ## _name(); \ + void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue); \ + void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue); \ + void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback); \ + void _menu_action_setting_edit_accessor_ ## _name(const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue); \ + void menu_action_setting_edit_accessor_ ## _name(const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue); \ + typedef void _name##_void + + DECLARE_MENU_EDIT_TYPE(int, int3); + DECLARE_MENU_EDIT_TYPE(float, float3); + DECLARE_MENU_EDIT_TYPE(float, float32); + DECLARE_MENU_EDIT_TYPE(float, float43); + DECLARE_MENU_EDIT_TYPE(float, float5); + DECLARE_MENU_EDIT_TYPE(float, float51); + DECLARE_MENU_EDIT_TYPE(float, float52); + DECLARE_MENU_EDIT_TYPE(float, float62); + DECLARE_MENU_EDIT_TYPE(unsigned long, long5); + void menu_action_setting_edit_bool(const char* pstr, bool* ptr); - void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue); - void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float43(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_float62(const char* pstr, float* ptr, float minValue, float maxValue); - void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue); void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float43(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_float62(const char* pstr, float* ptr, float minValue, float maxValue, screenFunc_t callbackFunc); - void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, screenFunc_t callbackFunc); + void menu_action_setting_edit_accessor_bool(const char* pstr, bool (*pget)(), void (*pset)(bool)); #if ENABLED(SDSUPPORT) void lcd_sdcard_menu(); @@ -375,12 +380,15 @@ uint16_t max_display_update_time = 0; #define MENU_ITEM_DUMMY() do { _thisItemNr++; } while(0) #define MENU_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) + #define MENU_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__) #if ENABLED(ENCODER_RATE_MULTIPLIER) #define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) + #define MENU_MULTIPLIER_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__) #else //!ENCODER_RATE_MULTIPLIER #define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__) + #define MENU_MULTIPLIER_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__) #endif //!ENCODER_RATE_MULTIPLIER /** Used variables to keep track of the menu */ @@ -417,6 +425,7 @@ uint16_t max_display_update_time = 0; // Variables used when editing values. const char* editLabel; void* editValue; + void* editSetter; int32_t minEditValue, maxEditValue; screenFunc_t callbackFunc; // call this after editing @@ -2105,7 +2114,7 @@ void kill_screen(const char* lcd_msg) { MENU_BACK(MSG_MAIN); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); - MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu); + MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_filament_menu); #if HAS_LCD_CONTRAST //MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); @@ -2543,10 +2552,14 @@ void kill_screen(const char* lcd_msg) { * "Control" > "Filament" submenu * */ - void lcd_control_volumetric_menu() { + void lcd_control_filament_menu() { START_MENU(); MENU_BACK(MSG_CONTROL); + #if ENABLED(LIN_ADVANCE) + MENU_ITEM_EDIT_ACCESSOR(float3, MSG_ADVANCE_K, planner.get_extruder_advance_k, planner.set_extruder_advance_k, 0, 999); + #endif + MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers); if (volumetric_enabled) { @@ -3101,6 +3114,8 @@ void kill_screen(const char* lcd_msg) { * void _menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void menu_action_setting_edit_callback_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue, const screenFunc_t callback); // edit int with callback + * void _menu_action_setting_edit_accessor_int3(const char * const pstr, int (*pget)(), void (*pset)(int), const int minValue, const int maxValue); + * void menu_action_setting_edit_accessor_int3(const char * const pstr, int (*pget)(), void (*pset)(int), const int minValue, const int maxValue); // edit int via pget and pset accessor functions * * You can then use one of the menu macros to present the edit interface: * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) @@ -3112,6 +3127,9 @@ void kill_screen(const char* lcd_msg) { * Also: MENU_MULTIPLIER_ITEM_EDIT, MENU_ITEM_EDIT_CALLBACK, and MENU_MULTIPLIER_ITEM_EDIT_CALLBACK * * menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + * + * Values that are get/set via functions (As opposed to global variables) can use the accessor form: + * MENU_ITEM_EDIT_ACCESSOR(int3, MSG_SPEED, get_feedrate_percentage, set_feedrate_percentage, 10, 999) */ #define menu_edit_type(_type, _name, _strFunc, _scale) \ bool _menu_edit_ ## _name () { \ @@ -3121,7 +3139,11 @@ void kill_screen(const char* lcd_msg) { if (lcdDrawUpdate) \ lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale))); \ if (lcd_clicked) { \ - *((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \ + _type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \ + if (editValue != NULL) \ + *((_type*)editValue) = value; \ + else if (editSetter != NULL) \ + ((void (*)(_type))editSetter)(value); \ lcd_goto_previous_menu(); \ } \ return lcd_clicked; \ @@ -3135,6 +3157,7 @@ void kill_screen(const char* lcd_msg) { \ editLabel = pstr; \ editValue = ptr; \ + editSetter = NULL; \ minEditValue = minValue * _scale; \ maxEditValue = maxValue * _scale - minEditValue; \ encoderPosition = (*ptr) * _scale - minEditValue; \ @@ -3142,12 +3165,28 @@ void kill_screen(const char* lcd_msg) { void menu_action_setting_edit_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue) { \ _menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \ currentScreen = menu_edit_ ## _name; \ - }\ + } \ void menu_action_setting_edit_callback_ ## _name (const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback) { \ _menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \ currentScreen = menu_edit_callback_ ## _name; \ callbackFunc = callback; \ } \ + void _menu_action_setting_edit_accessor_ ## _name (const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue) { \ + lcd_save_previous_screen(); \ + \ + lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; \ + \ + editLabel = pstr; \ + editValue = NULL; \ + editSetter = pset; \ + minEditValue = minValue * _scale; \ + maxEditValue = maxValue * _scale - minEditValue; \ + encoderPosition = pget() * _scale - minEditValue; \ + } \ + void menu_action_setting_edit_accessor_ ## _name (const char * const pstr, _type (*pget)(), void (*pset)(_type), const _type minValue, const _type maxValue) { \ + _menu_action_setting_edit_accessor_ ## _name(pstr, pget, pset, minValue, maxValue); \ + currentScreen = menu_edit_ ## _name; \ + } \ typedef void _name menu_edit_type(int, int3, itostr3, 1); @@ -3252,6 +3291,11 @@ void kill_screen(const char* lcd_msg) { menu_action_setting_edit_bool(pstr, ptr); (*callback)(); } + void menu_action_setting_edit_accessor_bool(const char* pstr, bool (*pget)(), void (*pset)(bool)) { + UNUSED(pstr); + pset(!pget()); + lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; + } #endif // ULTIPANEL diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h index cb06db95a..b04c0c4e7 100644 --- a/Marlin/ultralcd_impl_DOGM.h +++ b/Marlin/ultralcd_impl_DOGM.h @@ -767,27 +767,31 @@ static void lcd_implementation_status_screen() { #define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false) #define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true) - #define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float62(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + #define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \ + inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _strFunc(pget())); \ + } \ + typedef void _name##_void - #define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float62(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data))) + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(long, long5, ftostr5rj); + + #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + #define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) { const uint8_t labellen = lcd_strlen_P(pstr), diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index 6672e4b08..9b0258862 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -874,28 +874,31 @@ static void lcd_implementation_status_screen() { lcd_printPGM(data); } - #define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_float62(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr62rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + #define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \ + inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \ + lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(pget())); \ + } \ + typedef void _name##_void - //Add version for callback functions - #define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51sign(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_float62(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr62rj(*(data))) - #define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5rj(*(data))) + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(long, long5, ftostr5rj); + + #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + #define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) void lcd_implementation_drawedit(const char* pstr, const char* const value=NULL) { lcd.setCursor(1, 1); From 3cdf78a79f336ea0a6234b2ed4c36604e3a5e7ac Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 23:00:08 -0500 Subject: [PATCH 6/8] MSG_VOLUMETRIC => MSG_FILAMENT --- Marlin/language_an.h | 2 +- Marlin/language_bg.h | 2 +- Marlin/language_ca.h | 2 +- Marlin/language_cn.h | 2 +- Marlin/language_cz.h | 2 +- Marlin/language_da.h | 2 +- Marlin/language_de.h | 2 +- Marlin/language_el-gr.h | 2 +- Marlin/language_el.h | 2 +- Marlin/language_en.h | 7 +++++-- Marlin/language_es.h | 2 +- Marlin/language_eu.h | 2 +- Marlin/language_fi.h | 2 +- Marlin/language_fr.h | 2 +- Marlin/language_gl.h | 2 +- Marlin/language_hr.h | 2 +- Marlin/language_it.h | 2 +- Marlin/language_kana.h | 2 +- Marlin/language_kana_utf8.h | 2 +- Marlin/language_nl.h | 2 +- Marlin/language_pl.h | 2 +- Marlin/language_pt-br.h | 2 +- Marlin/language_pt-br_utf8.h | 2 +- Marlin/language_pt.h | 2 +- Marlin/language_pt_utf8.h | 2 +- Marlin/language_ru.h | 2 +- Marlin/language_test.h | 6 +++--- Marlin/language_tr.h | 2 +- Marlin/language_uk.h | 2 +- Marlin/language_zh_CN.h | 2 +- Marlin/language_zh_TW.h | 2 +- Marlin/ultralcd.cpp | 2 +- 32 files changed, 38 insertions(+), 35 deletions(-) diff --git a/Marlin/language_an.h b/Marlin/language_an.h index bf10b8543..d4983591d 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("E5 trangos/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimiento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("Contraste") diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 4c6db482d..fedb8ca7c 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -116,7 +116,7 @@ #define MSG_E5STEPS _UxGT("E5 стъпки/mm") #define MSG_TEMPERATURE _UxGT("Температура") #define MSG_MOTION _UxGT("Движение") -#define MSG_VOLUMETRIC _UxGT("Нишка") +#define MSG_FILAMENT _UxGT("Нишка") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Диам. нишка") #define MSG_CONTRAST _UxGT("LCD контраст") diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index 699706f48..8502e1cac 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -120,7 +120,7 @@ #define MSG_E5STEPS _UxGT("E5passos/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Moviment") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") #define MSG_CONTRAST _UxGT("Contrast de LCD") diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index d1b59e820..228044568 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -108,7 +108,7 @@ #define MSG_E5STEPS "E5steps/mm" #define MSG_TEMPERATURE "\xc9\xd2" #define MSG_MOTION "\xdf\xb2" -#define MSG_VOLUMETRIC "Filament" +#define MSG_FILAMENT "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_DIAM "Fil. Dia." #define MSG_CONTRAST "LCD contrast" diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 77f9ac21d..ab7b86a89 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -119,7 +119,7 @@ #define MSG_E5STEPS _UxGT("E5kroku/mm") #define MSG_TEMPERATURE _UxGT("Teplota") #define MSG_MOTION _UxGT("Pohyb") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.") #define MSG_CONTRAST _UxGT("Kontrast LCD") diff --git a/Marlin/language_da.h b/Marlin/language_da.h index abe1a775e..9b8c45ecd 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -117,7 +117,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bevægelse") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD kontrast") diff --git a/Marlin/language_de.h b/Marlin/language_de.h index b0b50c2ae..535836fb8 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -121,7 +121,7 @@ #define MSG_E5STEPS _UxGT("E5 Steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bewegung") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_FILAMENT_DIAM _UxGT("D Fil.") #define MSG_CONTRAST _UxGT("LCD Kontrast") diff --git a/Marlin/language_el-gr.h b/Marlin/language_el-gr.h index 2a8298852..e26405a9d 100644 --- a/Marlin/language_el-gr.h +++ b/Marlin/language_el-gr.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_MOTION _UxGT("Κίνηση") -#define MSG_VOLUMETRIC _UxGT("Νήμα") +#define MSG_FILAMENT _UxGT("Νήμα") #define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") #define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") #define MSG_CONTRAST _UxGT("Κοντράστ LCD") diff --git a/Marlin/language_el.h b/Marlin/language_el.h index 832b4c6c7..ab915f14c 100644 --- a/Marlin/language_el.h +++ b/Marlin/language_el.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") #define MSG_TEMPERATURE _UxGT("Θερμοκρασία") #define MSG_MOTION _UxGT("Κίνηση") -#define MSG_VOLUMETRIC _UxGT("Νήμα") +#define MSG_FILAMENT _UxGT("Νήμα") #define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") #define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") #define MSG_CONTRAST _UxGT("Κοντράστ LCD") diff --git a/Marlin/language_en.h b/Marlin/language_en.h index ffa0d6694..cbc54d954 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -300,8 +300,8 @@ #ifndef MSG_MOTION #define MSG_MOTION _UxGT("Motion") #endif -#ifndef MSG_VOLUMETRIC - #define MSG_VOLUMETRIC _UxGT("Filament") +#ifndef MSG_FILAMENT + #define MSG_FILAMENT _UxGT("Filament") #endif #ifndef MSG_VOLUMETRIC_ENABLED #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") @@ -309,6 +309,9 @@ #ifndef MSG_FILAMENT_DIAM #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #endif +#ifndef MSG_ADVANCE_K + #define MSG_ADVANCE_K _UxGT("Advance K") +#endif #ifndef MSG_CONTRAST #define MSG_CONTRAST _UxGT("LCD contrast") #endif diff --git a/Marlin/language_es.h b/Marlin/language_es.h index 7c4da00c7..10765f2b6 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -119,7 +119,7 @@ #define MSG_E5STEPS _UxGT("E5 pasos/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimiento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("Contraste") diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 9c9cd0eca..063d161b4 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -106,7 +106,7 @@ #define MSG_E5STEPS _UxGT("E5 pausoak/mm") #define MSG_TEMPERATURE _UxGT("Tenperatura") #define MSG_MOTION _UxGT("Mugimendua") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD kontrastea") diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index f604752a6..ad19a9b9f 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -107,7 +107,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("Lämpötila") #define MSG_MOTION _UxGT("Liike") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD kontrasti") diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index c58d43943..bb8975f12 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -120,7 +120,7 @@ #define MSG_E5STEPS _UxGT("E5pas/mm") #define MSG_TEMPERATURE _UxGT("Tempzrature") #define MSG_MOTION _UxGT("Mouvement") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") #define MSG_CONTRAST _UxGT("Contraste LCD") diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h index f1a69aee4..a3dcac180 100644 --- a/Marlin/language_gl.h +++ b/Marlin/language_gl.h @@ -116,7 +116,7 @@ #define MSG_E5STEPS _UxGT("E5pasos/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movemento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. fil.") #define MSG_CONTRAST _UxGT("Constraste LCD") diff --git a/Marlin/language_hr.h b/Marlin/language_hr.h index 4f7eac9d7..0d5bae21b 100644 --- a/Marlin/language_hr.h +++ b/Marlin/language_hr.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("Temperature") #define MSG_MOTION _UxGT("Gibanje") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("Kontrast LCD-a") diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 70016cce6..92724e183 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -123,7 +123,7 @@ #define MSG_E5STEPS _UxGT("E5passi/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. filo") #define MSG_CONTRAST _UxGT("Contrasto LCD") diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index 2752ca5b4..da2e18a8a 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -151,7 +151,7 @@ #endif #define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "オンド" ("Temperature") #define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ウゴキセッテイ" ("Motion") -#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament") +#define MSG_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4" // "フィラメント" ("Filament") #define MSG_VOLUMETRIC_ENABLED "E in mm3" #if LCD_WIDTH >= 20 #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "フィラメントチョッケイ" ("Fil. Dia.") diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index a21b1e3a7..01b393df7 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -125,7 +125,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("オンド") // "Temperature" #define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion" -#define MSG_VOLUMETRIC _UxGT("フィラメント") // "Filament" +#define MSG_FILAMENT _UxGT("フィラメント") // "Filament" #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("フィラメントチョッケイ") // "Fil. Dia." #define MSG_CONTRAST _UxGT("LCDコントラスト") // "LCD contrast" diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index c75145b9b..5f25f491e 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatuur") #define MSG_MOTION _UxGT("Beweging") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD contrast") diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 49b53b005..a7806a2ae 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -115,7 +115,7 @@ #define MSG_E5STEPS _UxGT("krokiE5/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Ruch") -#define MSG_VOLUMETRIC _UxGT("Filament") +#define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") #define MSG_FILAMENT_DIAM _UxGT("Sr. fil.") #define MSG_CONTRAST _UxGT("Kontrast LCD") diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h index e1d0ed4b1..f71bb92e1 100644 --- a/Marlin/language_pt-br.h +++ b/Marlin/language_pt-br.h @@ -108,7 +108,7 @@ #define MSG_E5STEPS "E5/mm" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" -#define MSG_VOLUMETRIC "Filamento" +#define MSG_FILAMENT "Filamento" #define MSG_VOLUMETRIC_ENABLED "Extr. em mm3" #define MSG_FILAMENT_DIAM "Diametro Fil." #define MSG_CONTRAST "Contraste" diff --git a/Marlin/language_pt-br_utf8.h b/Marlin/language_pt-br_utf8.h index 2b34886a0..a2f6deaad 100644 --- a/Marlin/language_pt-br_utf8.h +++ b/Marlin/language_pt-br_utf8.h @@ -108,7 +108,7 @@ #define MSG_E5STEPS _UxGT("E5/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("Extr. em mm3") #define MSG_FILAMENT_DIAM _UxGT("Diametro Fil.") #define MSG_CONTRAST _UxGT("Contraste") diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index 2682da58e..ba17986bf 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -112,7 +112,7 @@ #define MSG_E5STEPS "E5 passo/mm" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Movimento" -#define MSG_VOLUMETRIC "Filamento" +#define MSG_FILAMENT "Filamento" #define MSG_VOLUMETRIC_ENABLED "E em mm3" #define MSG_FILAMENT_DIAM "Fil. Diam." #define MSG_CONTRAST "Contraste" diff --git a/Marlin/language_pt_utf8.h b/Marlin/language_pt_utf8.h index e2aedb50d..b62119b43 100644 --- a/Marlin/language_pt_utf8.h +++ b/Marlin/language_pt_utf8.h @@ -112,7 +112,7 @@ #define MSG_E5STEPS _UxGT("E5 passo/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimento") -#define MSG_VOLUMETRIC _UxGT("Filamento") +#define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E em mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Diam.") #define MSG_CONTRAST _UxGT("Contraste") diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index caa825cc7..a4644928a 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -111,7 +111,7 @@ #define MSG_E4STEPS _UxGT("E4 шаг/мм") #define MSG_TEMPERATURE _UxGT("Температура") #define MSG_MOTION _UxGT("Механика") -#define MSG_VOLUMETRIC _UxGT("Пруток") +#define MSG_FILAMENT _UxGT("Пруток") #define MSG_VOLUMETRIC_ENABLED _UxGT("E в mm3") #define MSG_FILAMENT_DIAM _UxGT("Диаметр прутка") #define MSG_CONTRAST _UxGT("Контраст LCD") diff --git a/Marlin/language_test.h b/Marlin/language_test.h index 25b9c0947..61e04815d 100644 --- a/Marlin/language_test.h +++ b/Marlin/language_test.h @@ -148,7 +148,7 @@ #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 - #define MSG_VOLUMETRIC STRG_OKTAL_5 + #define MSG_FILAMENT STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 @@ -183,7 +183,7 @@ #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 - #define MSG_VOLUMETRIC STRG_OKTAL_5 + #define MSG_FILAMENT STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 @@ -218,7 +218,7 @@ #define MSG_MAIN STRG_OKTAL_2 #define MSG_TEMPERATURE STRG_OKTAL_3 #define MSG_MOTION STRG_OKTAL_4 - #define MSG_VOLUMETRIC STRG_OKTAL_5 + #define MSG_FILAMENT STRG_OKTAL_5 #define MSG_CONTRAST STRG_OKTAL_6 #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 diff --git a/Marlin/language_tr.h b/Marlin/language_tr.h index 095eedd9d..34f5c6157 100644 --- a/Marlin/language_tr.h +++ b/Marlin/language_tr.h @@ -120,7 +120,7 @@ #define MSG_E5STEPS _UxGT("E5steps/mm") // E4steps/mm #define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık #define MSG_MOTION _UxGT("Hareket") // Hareket -#define MSG_VOLUMETRIC _UxGT("Filaman") // Filaman +#define MSG_FILAMENT _UxGT("Filaman") // Filaman #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") // E in mm3 #define MSG_FILAMENT_DIAM _UxGT("Fil. Çap") // Fil. Çap #define MSG_CONTRAST _UxGT("LCD Kontrast") // LCD Kontrast diff --git a/Marlin/language_uk.h b/Marlin/language_uk.h index f36a366fe..774ef2308 100644 --- a/Marlin/language_uk.h +++ b/Marlin/language_uk.h @@ -116,7 +116,7 @@ #define MSG_E5STEPS _UxGT("E5кроків/мм") #define MSG_TEMPERATURE _UxGT("Температура") #define MSG_MOTION _UxGT("Рух") -#define MSG_VOLUMETRIC _UxGT("Волокно") +#define MSG_FILAMENT _UxGT("Волокно") #define MSG_VOLUMETRIC_ENABLED _UxGT("E в мм3") #define MSG_FILAMENT_DIAM _UxGT("Діам. волок.") #define MSG_CONTRAST _UxGT("контраст LCD") diff --git a/Marlin/language_zh_CN.h b/Marlin/language_zh_CN.h index 41982754e..ed9e5c984 100644 --- a/Marlin/language_zh_CN.h +++ b/Marlin/language_zh_CN.h @@ -108,7 +108,7 @@ #define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm" #define MSG_TEMPERATURE _UxGT("温度") //"Temperature" #define MSG_MOTION _UxGT("运动") //"Motion" -#define MSG_VOLUMETRIC _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu +#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu #define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled #define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia." #define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast" diff --git a/Marlin/language_zh_TW.h b/Marlin/language_zh_TW.h index 3d5a03b96..90aaa8200 100644 --- a/Marlin/language_zh_TW.h +++ b/Marlin/language_zh_TW.h @@ -108,7 +108,7 @@ #define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm" #define MSG_TEMPERATURE _UxGT("溫度") //"Temperature" #define MSG_MOTION _UxGT("運動") //"Motion" -#define MSG_VOLUMETRIC _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu +#define MSG_FILAMENT _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu #define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled #define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia." #define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 264d13549..26fe69dca 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -2114,7 +2114,7 @@ void kill_screen(const char* lcd_msg) { MENU_BACK(MSG_MAIN); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); - MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_filament_menu); + MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu); #if HAS_LCD_CONTRAST //MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); From 1286d9603dd12e06dccbcdef062e7b9f0b45a8e4 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 16 Apr 2017 21:32:52 -0500 Subject: [PATCH 7/8] Clean up and organize ultralcd.cpp --- Marlin/ultralcd.cpp | 349 +++++++++++++++++++++++--------------------- 1 file changed, 182 insertions(+), 167 deletions(-) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 26fe69dca..f15801e7c 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -90,50 +90,25 @@ uint16_t max_display_update_time = 0; #if ENABLED(ULTIPANEL) - // place-holders for Ki and Kd edits - float raw_Ki, raw_Kd; - - /** - * REVERSE_MENU_DIRECTION - * - * To reverse the menu direction we need a general way to reverse - * the direction of the encoder everywhere. So encoderDirection is - * added to allow the encoder to go the other way. - * - * This behavior is limited to scrolling Menus and SD card listings, - * and is disabled in other contexts. - */ - #if ENABLED(REVERSE_MENU_DIRECTION) - int8_t encoderDirection = 1; - #define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1) - #define ENCODER_DIRECTION_MENUS() (encoderDirection = -1) - #else - #define ENCODER_DIRECTION_NORMAL() ; - #define ENCODER_DIRECTION_MENUS() ; + #ifndef TALL_FONT_CORRECTION + #define TALL_FONT_CORRECTION 0 #endif - int8_t encoderDiff; // updated from interrupt context and added to encoderPosition every LCD update - - millis_t manual_move_start_time = 0; - int8_t manual_move_axis = (int8_t)NO_AXIS; - #if EXTRUDERS > 1 - int8_t manual_move_e_index = 0; - #else - #define manual_move_e_index 0 - #endif - - bool encoderRateMultiplierEnabled; - int32_t lastEncoderMovementMillis; - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #include "ubl.h" - #endif + // Function pointer to menu functions. + typedef void (*screenFunc_t)(); #if HAS_POWER_SWITCH extern bool powersupply; #endif - const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE; + #if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" + #endif + + //////////////////////////////////////////// + ///////////////// Menu Tree //////////////// + //////////////////////////////////////////// + void lcd_main_menu(); void lcd_tune_menu(); void lcd_prepare_menu(); @@ -145,13 +120,6 @@ uint16_t max_display_update_time = 0; void lcd_control_motion_menu(); void lcd_control_filament_menu(); - #if ENABLED(DAC_STEPPER_CURRENT) - void dac_driver_commit(); - void dac_driver_getValues(); - void lcd_dac_menu(); - void lcd_dac_write_eeprom(); - #endif - #if ENABLED(LCD_INFO_MENU) #if ENABLED(PRINTCOUNTER) void lcd_info_stats_menu(); @@ -173,6 +141,13 @@ uint16_t max_display_update_time = 0; void lcd_filament_change_resume_message(); #endif + #if ENABLED(DAC_STEPPER_CURRENT) + void dac_driver_commit(); + void dac_driver_getValues(); + void lcd_dac_menu(); + void lcd_dac_write_eeprom(); + #endif + #if HAS_LCD_CONTRAST void lcd_set_contrast(); #endif @@ -189,10 +164,10 @@ uint16_t max_display_update_time = 0; #include "mesh_bed_leveling.h" #endif - // Function pointer to menu functions. - typedef void (*screenFunc_t)(); + //////////////////////////////////////////// + //////////// Menu System Actions /////////// + //////////////////////////////////////////// - // Different types of actions that can be used in menu items. #define menu_action_back(dummy) _menu_action_back() void _menu_action_back(); void menu_action_submenu(screenFunc_t data); @@ -230,7 +205,9 @@ uint16_t max_display_update_time = 0; void menu_action_sddirectory(const char* filename, char* longFilename); #endif - /* Helper macros for menus */ + //////////////////////////////////////////// + //////////// Menu System Macros //////////// + //////////////////////////////////////////// #ifndef ENCODER_FEEDRATE_DEADZONE #define ENCODER_FEEDRATE_DEADZONE 10 @@ -242,59 +219,6 @@ uint16_t max_display_update_time = 0; #define ENCODER_PULSES_PER_STEP 1 #endif - #ifndef TALL_FONT_CORRECTION - #define TALL_FONT_CORRECTION 0 - #endif - - /** - * START_SCREEN_OR_MENU generates init code for a screen or menu - * - * encoderLine is the position based on the encoder - * encoderTopLine is the top menu line to display - * _lcdLineNr is the index of the LCD line (e.g., 0-3) - * _menuLineNr is the menu item to draw and process - * _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM - * _countedItems is the total number of items in the menu (after one call) - */ - #define START_SCREEN_OR_MENU(LIMIT) \ - ENCODER_DIRECTION_MENUS(); \ - encoderRateMultiplierEnabled = false; \ - if (encoderPosition > 0x8000) encoderPosition = 0; \ - static int8_t _countedItems = 0; \ - int8_t encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM); \ - if (_countedItems > 0 && encoderLine >= _countedItems - (LIMIT)) { \ - encoderLine = max(0, _countedItems - (LIMIT)); \ - encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM); \ - } - - #define SCREEN_OR_MENU_LOOP() \ - int8_t _menuLineNr = encoderTopLine, _thisItemNr; \ - for (int8_t _lcdLineNr = 0; _lcdLineNr < LCD_HEIGHT - (TALL_FONT_CORRECTION); _lcdLineNr++, _menuLineNr++) { \ - _thisItemNr = 0 - - /** - * START_SCREEN Opening code for a screen having only static items. - * Do simplified scrolling of the entire screen. - * - * START_MENU Opening code for a screen with menu items. - * Scroll as-needed to keep the selected line in view. - */ - #define START_SCREEN() \ - START_SCREEN_OR_MENU(LCD_HEIGHT - (TALL_FONT_CORRECTION)); \ - encoderTopLine = encoderLine; \ - bool _skipStatic = false; \ - SCREEN_OR_MENU_LOOP() - - #define START_MENU() \ - START_SCREEN_OR_MENU(1); \ - screen_changed = false; \ - NOMORE(encoderTopLine, encoderLine); \ - if (encoderLine >= encoderTopLine + LCD_HEIGHT - (TALL_FONT_CORRECTION)) { \ - encoderTopLine = encoderLine - (LCD_HEIGHT - (TALL_FONT_CORRECTION) - 1); \ - } \ - bool _skipStatic = true; \ - SCREEN_OR_MENU_LOOP() - /** * MENU_ITEM generates draw & handler code for a menu item, potentially calling: * @@ -352,17 +276,11 @@ uint16_t max_display_update_time = 0; } \ ++_thisItemNr - #define END_SCREEN() \ - } \ - _countedItems = _thisItemNr - - #define END_MENU() \ - } \ - _countedItems = _thisItemNr; \ - UNUSED(_skipStatic) - #if ENABLED(ENCODER_RATE_MULTIPLIER) + bool encoderRateMultiplierEnabled; + #define ENCODER_RATE_MULTIPLY(F) (encoderRateMultiplierEnabled = F) + //#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value /** @@ -375,7 +293,9 @@ uint16_t max_display_update_time = 0; _MENU_ITEM_PART_2(type, ## __VA_ARGS__); \ } while(0) - #endif //ENCODER_RATE_MULTIPLIER + #else // !ENCODER_RATE_MULTIPLIER + #define ENCODER_RATE_MULTIPLY(F) NOOP + #endif // !ENCODER_RATE_MULTIPLIER #define MENU_ITEM_DUMMY() do { _thisItemNr++; } while(0) #define MENU_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__) @@ -391,43 +311,137 @@ uint16_t max_display_update_time = 0; #define MENU_MULTIPLIER_ITEM_EDIT_ACCESSOR(type, label, ...) MENU_ITEM(setting_edit_accessor_ ## type, label, PSTR(label), ## __VA_ARGS__) #endif //!ENCODER_RATE_MULTIPLIER - /** Used variables to keep track of the menu */ - volatile uint8_t buttons; //the last checked buttons in a bit array. - #if ENABLED(REPRAPWORLD_KEYPAD) - volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shift register values + /** + * START_SCREEN_OR_MENU generates init code for a screen or menu + * + * encoderLine is the position based on the encoder + * encoderTopLine is the top menu line to display + * _lcdLineNr is the index of the LCD line (e.g., 0-3) + * _menuLineNr is the menu item to draw and process + * _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM + * _countedItems is the total number of items in the menu (after one call) + */ + #define START_SCREEN_OR_MENU(LIMIT) \ + ENCODER_DIRECTION_MENUS(); \ + ENCODER_RATE_MULTIPLY(false); \ + if (encoderPosition > 0x8000) encoderPosition = 0; \ + static int8_t _countedItems = 0; \ + int8_t encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM); \ + if (_countedItems > 0 && encoderLine >= _countedItems - (LIMIT)) { \ + encoderLine = max(0, _countedItems - (LIMIT)); \ + encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM); \ + } + + #define SCREEN_OR_MENU_LOOP() \ + int8_t _menuLineNr = encoderTopLine, _thisItemNr; \ + for (int8_t _lcdLineNr = 0; _lcdLineNr < LCD_HEIGHT - (TALL_FONT_CORRECTION); _lcdLineNr++, _menuLineNr++) { \ + _thisItemNr = 0 + + /** + * START_SCREEN Opening code for a screen having only static items. + * Do simplified scrolling of the entire screen. + * + * START_MENU Opening code for a screen with menu items. + * Scroll as-needed to keep the selected line in view. + */ + #define START_SCREEN() \ + START_SCREEN_OR_MENU(LCD_HEIGHT - (TALL_FONT_CORRECTION)); \ + encoderTopLine = encoderLine; \ + bool _skipStatic = false; \ + SCREEN_OR_MENU_LOOP() + + #define START_MENU() \ + START_SCREEN_OR_MENU(1); \ + screen_changed = false; \ + NOMORE(encoderTopLine, encoderLine); \ + if (encoderLine >= encoderTopLine + LCD_HEIGHT - (TALL_FONT_CORRECTION)) { \ + encoderTopLine = encoderLine - (LCD_HEIGHT - (TALL_FONT_CORRECTION) - 1); \ + } \ + bool _skipStatic = true; \ + SCREEN_OR_MENU_LOOP() + + #define END_SCREEN() \ + } \ + _countedItems = _thisItemNr + + #define END_MENU() \ + } \ + _countedItems = _thisItemNr; \ + UNUSED(_skipStatic) + + //////////////////////////////////////////// + ///////////// Global Variables ///////////// + //////////////////////////////////////////// + + /** + * REVERSE_MENU_DIRECTION + * + * To reverse the menu direction we need a general way to reverse + * the direction of the encoder everywhere. So encoderDirection is + * added to allow the encoder to go the other way. + * + * This behavior is limited to scrolling Menus and SD card listings, + * and is disabled in other contexts. + */ + #if ENABLED(REVERSE_MENU_DIRECTION) + int8_t encoderDirection = 1; + #define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1) + #define ENCODER_DIRECTION_MENUS() (encoderDirection = -1) + #else + #define ENCODER_DIRECTION_NORMAL() ; + #define ENCODER_DIRECTION_MENUS() ; #endif - #if ENABLED(LCD_HAS_SLOW_BUTTONS) - volatile uint8_t slow_buttons; // Bits of the pressed buttons. - #endif - int8_t encoderTopLine; /* scroll offset in the current menu */ - millis_t next_button_update_ms; - uint8_t lastEncoderBits; + // Encoder Movement + volatile int8_t encoderDiff; // Updated in lcd_buttons_update, added to encoderPosition every LCD update uint32_t encoderPosition; - #if PIN_EXISTS(SD_DETECT) - uint8_t lcd_sd_status; + millis_t lastEncoderMovementMillis = 0; + + // Button States + bool lcd_clicked, wait_for_unclick; + volatile uint8_t buttons; + millis_t next_button_update_ms; + #if ENABLED(REPRAPWORLD_KEYPAD) + volatile uint8_t buttons_reprapworld_keypad; + #endif + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + volatile uint8_t slow_buttons; #endif + // Menu System Navigation + screenFunc_t currentScreen = lcd_status_screen; + int8_t encoderTopLine; typedef struct { screenFunc_t menu_function; uint32_t encoder_position; } menuPosition; - - screenFunc_t currentScreen = lcd_status_screen; // pointer to the currently active menu handler - - menuPosition screen_history[10]; + menuPosition screen_history[6]; uint8_t screen_history_depth = 0; - bool screen_changed; + bool screen_changed, defer_return_to_status; - // LCD and menu clicks - bool lcd_clicked, wait_for_unclick, defer_return_to_status; - - // Variables used when editing values. - const char* editLabel; - void* editValue; - void* editSetter; + // Value Editing + const char *editLabel; + void *editValue, *editSetter; int32_t minEditValue, maxEditValue; - screenFunc_t callbackFunc; // call this after editing + screenFunc_t callbackFunc; + + // Manual Moves + const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE; + millis_t manual_move_start_time = 0; + int8_t manual_move_axis = (int8_t)NO_AXIS; + #if EXTRUDERS > 1 + int8_t manual_move_e_index = 0; + #else + #define manual_move_e_index 0 + #endif + + #if PIN_EXISTS(SD_DETECT) + uint8_t lcd_sd_status; + #endif + + #if ENABLED(PIDTEMP) + float raw_Ki, raw_Kd; // place-holders for Ki and Kd edits + #endif /** * General function to go directly to a screen @@ -528,7 +542,7 @@ void lcd_status_screen() { #if ENABLED(ULTIPANEL) ENCODER_DIRECTION_NORMAL(); - encoderRateMultiplierEnabled = false; + ENCODER_RATE_MULTIPLY(false); #endif #if ENABLED(LCD_PROGRESS_BAR) @@ -2186,28 +2200,28 @@ void kill_screen(const char* lcd_msg) { PID_PARAM(Kd, e) = scalePID_d(raw_Kd); thermalManager.updatePID(); } - #define _PIDTEMP_BASE_FUNCTIONS(N) \ + #define _DEFINE_PIDTEMP_BASE_FUNCS(N) \ void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \ void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); } #if ENABLED(PID_AUTOTUNE_MENU) - #define _PIDTEMP_FUNCTIONS(N) \ - _PIDTEMP_BASE_FUNCTIONS(N); \ - void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } + #define DEFINE_PIDTEMP_FUNCS(N) \ + _DEFINE_PIDTEMP_BASE_FUNCS(N); \ + void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } typedef void _pid_##N##_void #else - #define _PIDTEMP_FUNCTIONS(N) _PIDTEMP_BASE_FUNCTIONS(N) + #define DEFINE_PIDTEMP_FUNCS(N) _DEFINE_PIDTEMP_BASE_FUNCS(N) typedef void _pid_##N##_void #endif - _PIDTEMP_FUNCTIONS(0) + DEFINE_PIDTEMP_FUNCS(0); #if ENABLED(PID_PARAMS_PER_HOTEND) #if HOTENDS > 1 - _PIDTEMP_FUNCTIONS(1) + DEFINE_PIDTEMP_FUNCS(1); #if HOTENDS > 2 - _PIDTEMP_FUNCTIONS(2) + DEFINE_PIDTEMP_FUNCS(2); #if HOTENDS > 3 - _PIDTEMP_FUNCTIONS(3) + DEFINE_PIDTEMP_FUNCS(3); #if HOTENDS > 4 - _PIDTEMP_FUNCTIONS(4) + DEFINE_PIDTEMP_FUNCS(4); #endif // HOTENDS > 4 #endif // HOTENDS > 3 #endif // HOTENDS > 2 @@ -2660,7 +2674,7 @@ void kill_screen(const char* lcd_msg) { void lcd_sdcard_menu() { ENCODER_DIRECTION_MENUS(); if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card) - uint16_t fileCnt = card.getnrfilenames(); + const uint16_t fileCnt = card.getnrfilenames(); START_MENU(); MENU_BACK(MSG_MAIN); card.getWorkDirName(); @@ -2675,11 +2689,11 @@ void kill_screen(const char* lcd_msg) { for (uint16_t i = 0; i < fileCnt; i++) { if (_menuLineNr == _thisItemNr) { - #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) - int nr = fileCnt - 1 - i; - #else - int nr = i; - #endif + const uint16_t nr = + #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) + fileCnt - 1 - + #endif + i; #if ENABLED(SDCARD_SORT_ALPHA) card.getfilename_sorted(nr); @@ -3104,9 +3118,9 @@ void kill_screen(const char* lcd_msg) { * * Functions for editing single values * - * The "menu_edit_type" macro generates the functions needed to edit a numerical value. + * The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value. * - * For example, menu_edit_type(int, int3, itostr3, 1) expands into these functions: + * For example, DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1) expands into these functions: * * bool _menu_edit_int3(); * void menu_edit_int3(); // edit int (interactively) @@ -3131,7 +3145,7 @@ void kill_screen(const char* lcd_msg) { * Values that are get/set via functions (As opposed to global variables) can use the accessor form: * MENU_ITEM_EDIT_ACCESSOR(int3, MSG_SPEED, get_feedrate_percentage, set_feedrate_percentage, 10, 999) */ - #define menu_edit_type(_type, _name, _strFunc, _scale) \ + #define DEFINE_MENU_EDIT_TYPE(_type, _name, _strFunc, _scale) \ bool _menu_edit_ ## _name () { \ ENCODER_DIRECTION_NORMAL(); \ if ((int32_t)encoderPosition < 0) encoderPosition = 0; \ @@ -3189,15 +3203,15 @@ void kill_screen(const char* lcd_msg) { } \ typedef void _name - menu_edit_type(int, int3, itostr3, 1); - menu_edit_type(float, float3, ftostr3, 1.0); - menu_edit_type(float, float32, ftostr32, 100.0); - menu_edit_type(float, float43, ftostr43sign, 1000.0); - menu_edit_type(float, float5, ftostr5rj, 0.01); - menu_edit_type(float, float51, ftostr51sign, 10.0); - menu_edit_type(float, float52, ftostr52sign, 100.0); - menu_edit_type(float, float62, ftostr62rj, 100.0); - menu_edit_type(unsigned long, long5, ftostr5rj, 0.01); + DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1); + DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0); + DEFINE_MENU_EDIT_TYPE(float, float32, ftostr32, 100.0); + DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000.0); + DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01); + DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0); + DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0); + DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0); + DEFINE_MENU_EDIT_TYPE(unsigned long, long5, ftostr5rj, 0.01); /** * @@ -3466,7 +3480,7 @@ void lcd_update() { #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) - bool sd_status = IS_SD_INSERTED; + const bool sd_status = IS_SD_INSERTED; if (sd_status != lcd_sd_status && lcd_detected()) { if (sd_status) { @@ -3489,7 +3503,7 @@ void lcd_update() { #endif //SDSUPPORT && SD_DETECT_PIN - millis_t ms = millis(); + const millis_t ms = millis(); if (ELAPSED(ms, next_lcd_update_ms) #if ENABLED(DOGLCD) || drawing_screen @@ -3759,6 +3773,7 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; } * Warning: This function is called from interrupt context! */ void lcd_buttons_update() { + static uint8_t lastEncoderBits; millis_t now = millis(); if (ELAPSED(now, next_button_update_ms)) { From a00ae4790af49fad175219e077acd4cc83ec4fba Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 17 Apr 2017 00:27:49 -0500 Subject: [PATCH 8/8] Replace M905 with unique code M900 --- Marlin/Configuration_adv.h | 6 ++++-- Marlin/Marlin_main.cpp | 8 ++++---- Marlin/configuration_store.cpp | 6 +++--- .../example_configurations/Cartesio/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/Felix/Configuration_adv.h | 6 ++++-- .../example_configurations/Hephestos/Configuration_adv.h | 6 ++++-- .../Hephestos_2/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/K8200/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/K8400/Configuration_adv.h | 6 ++++-- .../example_configurations/RigidBot/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/SCARA/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/TAZ4/Configuration_adv.h | 6 ++++-- .../example_configurations/TinyBoy2/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/WITBOX/Configuration_adv.h | 6 ++++-- .../delta/FLSUN/auto_calibrate/Configuration_adv.h | 6 ++++-- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 6 ++++-- .../delta/generic/Configuration_adv.h | 6 ++++-- .../delta/kossel_mini/Configuration_adv.h | 6 ++++-- .../delta/kossel_pro/Configuration_adv.h | 6 ++++-- .../delta/kossel_xl/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/makibox/Configuration_adv.h | 6 ++++-- .../tvrrug/Round2/Configuration_adv.h | 6 ++++-- Marlin/example_configurations/wt150/Configuration_adv.h | 6 ++++-- 23 files changed, 91 insertions(+), 49 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index adfb03ccf..30e40fbff 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -633,13 +633,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 748646596..719edd51a 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -8797,13 +8797,13 @@ inline void gcode_M503() { #if ENABLED(LIN_ADVANCE) /** - * M905: Set and/or Get advance K factor and WH/D ratio + * M900: Set and/or Get advance K factor and WH/D ratio * * K Set advance K factor * R Set ratio directly (overrides WH/D) * W H D Set ratio from WH/D */ - inline void gcode_M905() { + inline void gcode_M900() { stepper.synchronize(); const float newK = code_seen('K') ? code_value_float() : -1; @@ -10264,8 +10264,8 @@ void process_next_command() { #endif // DUAL_X_CARRIAGE #if ENABLED(LIN_ADVANCE) - case 905: // M905: Set advance K factor. - gcode_M905(); + case 900: // M900: Set advance K factor. + gcode_M900(); break; #endif diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index ced713b80..c87a15867 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -150,8 +150,8 @@ * 576 M906 E4 stepperE4 current (uint16_t) * * LIN_ADVANCE: 8 bytes - * 580 M905 K extruder_advance_k (float) - * 584 M905 WHD advance_ed_ratio (float) + * 580 M900 K extruder_advance_k (float) + * 584 M900 WHD advance_ed_ratio (float) * * 588 Minimum end-point * 1909 (588 + 36 + 9 + 288 + 988) Maximum end-point @@ -1665,7 +1665,7 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Linear Advance:"); } CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M905 K", planner.get_extruder_advance_k()); + SERIAL_ECHOPAIR(" M900 K", planner.get_extruder_advance_k()); SERIAL_ECHOLNPAIR(" R", planner.get_advance_ed_ratio()); #endif } diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 1e7a13c1c..86826d36e 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index fef4bf0a5..c7b37ce91 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 43ea5654e..45206ef5f 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h index 7001e573c..19ef14cb5 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h @@ -614,13 +614,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index a3ee7f353..d87896b02 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -643,13 +643,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h index f76fa256e..509ee750d 100644 --- a/Marlin/example_configurations/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/K8400/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 7a5be5249..05d5c3750 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 90e13e365..220f0d79e 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index 906452643..5134ff6b4 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -638,13 +638,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 3fa4f0b05..9ed994361 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -633,13 +633,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 43ea5654e..45206ef5f 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index e2c7e024c..220bfa471 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -654,13 +654,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 7d4a2c0c2..eed1171b9 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -654,13 +654,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index ee2df57eb..7de00f080 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -651,13 +651,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index ee2df57eb..7de00f080 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -651,13 +651,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index a57c2bf35..40e7259ed 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -657,13 +657,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 08ba347da..8268e4293 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -651,13 +651,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index fc5a716fa..7f752213d 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 78db8e1d5..cfb3fc2b4 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -630,13 +630,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode. diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index ea7644e71..73c43f17f 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -633,13 +633,15 @@ * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures * if the slicer is using variable widths or layer heights within one print! * - * This option sets the default E:D ratio at startup. Use `M905` to override this value. + * This option sets the default E:D ratio at startup. Use `M900` to override this value. * - * Example: `M905 W0.4 H0.2 D1.75`, where: + * Example: `M900 W0.4 H0.2 D1.75`, where: * - W is the extrusion width in mm * - H is the layer height in mm * - D is the filament diameter in mm * + * Example: `M900 R0.0458` to set the ratio directly. + * * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. * * Slic3r (including Prusa Slic3r) produces Gcode compatible with the automatic mode.