Merge pull request #7011 from thinkyhead/bf_serial_macros

Tweak serial macros
This commit is contained in:
Scott Lahteine 2017-06-09 17:58:20 -05:00 committed by GitHub
commit f4b76b1ee7
26 changed files with 444 additions and 450 deletions

View file

@ -288,7 +288,7 @@
SERIAL_ECHOPAIR(" Doing circle at: (xi=", xi);
SERIAL_ECHOPAIR(", yi=", yi);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
start_angle = 0.0; // assume it is going to be a full circle
@ -467,7 +467,7 @@
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
//debug_current_and_destination(PSTR("Connecting horizontal line."));
}
@ -501,7 +501,7 @@
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
debug_current_and_destination(PSTR("Connecting vertical line."));
}
print_line_from_here_to_there(LOGICAL_X_POSITION(sx), LOGICAL_Y_POSITION(sy), g26_layer_height, LOGICAL_X_POSITION(ex), LOGICAL_Y_POSITION(ey), g26_layer_height);

View file

@ -736,7 +736,7 @@
char c;
while (Wire.available() > 0 && (c = (char)Wire.read()) > 0)
SERIAL_ECHO(c);
SERIAL_EOL;
SERIAL_EOL();
}
// Set module back to normal (distance) mode

View file

@ -130,7 +130,7 @@ int16_t count_test_bytes(const char * const ptr) {
}
SERIAL_CHAR(ccc);
}
SERIAL_EOL;
SERIAL_EOL();
ptr += 16;
safe_delay(25);
idle();
@ -200,7 +200,7 @@ void free_memory_pool_report(char * const ptr, const int16_t size) {
*addr = i;
SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
}
SERIAL_EOL;
SERIAL_EOL();
}
}
#endif // M100_FREE_MEMORY_CORRUPTOR
@ -229,7 +229,7 @@ void init_free_memory(char *ptr, int16_t size) {
if (ptr[i] != TEST_BYTE) {
SERIAL_ECHOPAIR("? address : ", hex_address(ptr + i));
SERIAL_ECHOLNPAIR("=", hex_byte(ptr[i]));
SERIAL_EOL;
SERIAL_EOL();
}
}
}
@ -323,7 +323,7 @@ int check_for_free_memory_corruption(const char * const title) {
SERIAL_ECHOPGM(" return=");
if (block_cnt == 1) {
SERIAL_CHAR('0'); // if the block_cnt is 1, nothing has broken up the free memory
SERIAL_EOL; // area and it is appropriate to say 'no corruption'.
SERIAL_EOL(); // area and it is appropriate to say 'no corruption'.
return 0;
}
SERIAL_ECHOLNPGM("true");

View file

@ -734,7 +734,7 @@ void report_current_position_detail();
SERIAL_CHAR(')');
if (suffix) {serialprintPGM(suffix);} //won't compile for Teensy with the previous construction
else SERIAL_EOL;
else SERIAL_EOL();
}
void print_xyz(const char* prefix, const char* suffix, const float xyz[]) {
@ -868,10 +868,10 @@ inline bool _enqueuecommand(const char* cmd, bool say_ok=false) {
*/
bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) {
if (_enqueuecommand(cmd, say_ok)) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd);
SERIAL_CHAR('"');
SERIAL_EOL;
SERIAL_EOL();
return true;
}
return false;
@ -1010,7 +1010,7 @@ void servo_init() {
#endif // HAS_COLOR_LEDS
void gcode_line_error(const char* err, bool doFlush = true) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
serialprintPGM(err);
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
@ -1206,7 +1206,7 @@ inline void get_serial_commands() {
card.checkautostart(true);
}
else if (n == -1) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ECHOLNPGM(MSG_SD_ERR_READ);
}
if (sd_char == '#') stop_buffering = true;
@ -1261,7 +1261,7 @@ void get_available_commands() {
bool get_target_extruder_from_command(int code) {
if (parser.seen('T')) {
if (parser.value_byte() >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_CHAR('M');
SERIAL_ECHO(code);
SERIAL_ECHOLNPAIR(" " MSG_INVALID_EXTRUDER " ", parser.value_byte());
@ -1421,7 +1421,7 @@ static void set_axis_is_at_home(const AxisEnum axis) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1510,7 +1510,7 @@ static void set_axis_is_at_home(const AxisEnum axis) {
DEBUG_POS("", current_position);
SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", axis_codes[axis]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1527,7 +1527,7 @@ inline float get_homing_bump_feedrate(const AxisEnum axis) {
uint8_t hbd = pgm_read_byte(&homing_bump_divisor[axis]);
if (hbd < 1) {
hbd = 10;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1");
}
return homing_feedrate(axis) / hbd;
@ -1748,7 +1748,7 @@ static void clean_up_after_endstop_or_probe_move() {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("do_probe_raise(", z_raise);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1777,7 +1777,7 @@ static void clean_up_after_endstop_or_probe_move() {
zz = z && !axis_homed[Z_AXIS];
#endif
if (xx || yy || zz) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_HOME " ");
if (xx) SERIAL_ECHOPGM(MSG_X);
if (yy) SERIAL_ECHOPGM(MSG_Y);
@ -1811,7 +1811,7 @@ static void clean_up_after_endstop_or_probe_move() {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("dock_sled(", stow);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -2054,7 +2054,7 @@ static void clean_up_after_endstop_or_probe_move() {
// (Measured completion time was 0.65 seconds
// after reset, deploy, and stow sequence)
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
stop(); // punt!
}
@ -2066,7 +2066,7 @@ static void clean_up_after_endstop_or_probe_move() {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("set_bltouch_deployed(", deploy);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
}
@ -2098,7 +2098,7 @@ static void clean_up_after_endstop_or_probe_move() {
// measured completion time was 0.65 seconds
// after reset, deploy & stow sequence
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
stop(); // punt!
return true;
@ -2111,7 +2111,7 @@ static void clean_up_after_endstop_or_probe_move() {
#define _AUE_ARGS
#endif
if (axis_unhomed_error(_AUE_ARGS)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_STOP_UNHOMED);
stop();
return true;
@ -2159,7 +2159,7 @@ static void clean_up_after_endstop_or_probe_move() {
if (_TRIGGERED_WHEN_STOWED_TEST == deploy) { // State hasn't changed?
if (IsRunning()) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Z-Probe failed");
LCD_ALERTMESSAGEPGM("Err: ZPROBE");
}
@ -2323,7 +2323,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_PROTOCOL_F(y, 3);
SERIAL_PROTOCOLPGM(" Z: ");
SERIAL_PROTOCOL_F(measured_z, 3);
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -2523,7 +2523,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL((int)x);
}
SERIAL_EOL;
SERIAL_EOL();
#endif
#ifdef SCAD_MESH_OUTPUT
SERIAL_PROTOCOLLNPGM("measured_z = ["); // open 2D array
@ -2561,12 +2561,12 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_PROTOCOLCHAR(']'); // close sub-array
if (y < sy - 1) SERIAL_PROTOCOLCHAR(',');
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#ifdef SCAD_MESH_OUTPUT
SERIAL_PROTOCOLPGM("];"); // close 2D array
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -2596,7 +2596,7 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
return; // Don't overwrite good values.
}
SERIAL_EOL;
SERIAL_EOL();
// Get X neighbors, Y neighbors, and XY neighbors
const uint8_t x1 = x + xdir, y1 = y + ydir, x2 = x1 + xdir, y2 = y1 + ydir;
@ -2798,7 +2798,7 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa
SERIAL_ECHOPAIR(", ", distance);
SERIAL_ECHOPAIR(", ", fr_mm_s);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -2841,7 +2841,7 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("<<< do_homing_move(", axis_codes[axis]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
}
@ -2896,7 +2896,7 @@ static void homeaxis(const AxisEnum axis) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> homeaxis(", axis_codes[axis]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -3029,7 +3029,7 @@ static void homeaxis(const AxisEnum axis) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("<<< homeaxis(", axis_codes[axis]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
} // homeaxis()
@ -3176,15 +3176,15 @@ void gcode_get_destination() {
switch (busy_state) {
case IN_HANDLER:
case IN_PROCESS:
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_BUSY_PROCESSING);
break;
case PAUSED_FOR_USER:
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_USER);
break;
case PAUSED_FOR_INPUT:
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_INPUT);
break;
default:
@ -3302,7 +3302,7 @@ inline void gcode_G0_G1(
}
else {
// Bad arguments
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_ARC_ARGS);
}
}
@ -3543,7 +3543,7 @@ inline void gcode_G4() {
else
SERIAL_ECHOLNPGM(" (disabled)");
SERIAL_EOL;
SERIAL_EOL();
#elif ENABLED(MESH_BED_LEVELING)
@ -3557,7 +3557,7 @@ inline void gcode_G4() {
else
SERIAL_ECHOPGM(" (disabled)");
SERIAL_EOL;
SERIAL_EOL();
#endif // MESH_BED_LEVELING
}
@ -3613,7 +3613,7 @@ inline void gcode_G4() {
// Disallow Z homing if X or Y are unknown
if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) {
LCD_MESSAGEPGM(MSG_ERR_Z_HOMING);
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_Z_HOMING);
return;
}
@ -3652,7 +3652,7 @@ inline void gcode_G4() {
}
else {
LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT);
}
@ -4300,14 +4300,14 @@ void home_all_axes() { gcode_G28(true); }
if (parser.seen('W')) {
if (!leveling_is_valid()) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("No bilinear grid");
return;
}
const float z = parser.seen('Z') && parser.has_value() ? parser.value_float() : NAN;
if (!isnan(z) || !WITHIN(z, -10, 10)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Bad Z value");
return;
}
@ -4837,11 +4837,11 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8);
SERIAL_PROTOCOLPGM(" d: ");
SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8);
SERIAL_EOL;
SERIAL_EOL();
if (verbose_level > 2) {
SERIAL_PROTOCOLPGM("Mean of sampled points: ");
SERIAL_PROTOCOL_F(mean, 8);
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -4887,9 +4887,9 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL_F(diff, 5);
} // xx
SERIAL_EOL;
SERIAL_EOL();
} // yy
SERIAL_EOL;
SERIAL_EOL();
if (verbose_level > 3) {
SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:");
@ -4911,9 +4911,9 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL_F(diff, 5);
} // xx
SERIAL_EOL;
SERIAL_EOL();
} // yy
SERIAL_EOL;
SERIAL_EOL();
}
} //do_topography_map
@ -5163,7 +5163,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOLPGM("Checking... AC");
if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)");
SERIAL_EOL;
SERIAL_EOL();
LCD_MESSAGEPGM("Checking... AC"); // TODO: Make translatable string
SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
@ -5179,7 +5179,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOL_F(endstop_adj[C_AXIS], 2);
SERIAL_PROTOCOLPAIR(" Radius:", delta_radius);
}
SERIAL_EOL;
SERIAL_EOL();
if (_7p_calibration && towers_set) {
SERIAL_PROTOCOLPGM(".Tower angle : Tx:");
if (delta_tower_angle_trim[A_AXIS] >= 0) SERIAL_CHAR('+');
@ -5188,7 +5188,7 @@ void home_all_axes() { gcode_G28(true); }
if (delta_tower_angle_trim[B_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(delta_tower_angle_trim[B_AXIS], 2);
SERIAL_PROTOCOLPGM(" Tz:+0.00");
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(Z_PROBE_SLED)
@ -5356,7 +5356,7 @@ void home_all_axes() { gcode_G28(true); }
if (z_at_pt[9] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[9], 2);
}
if (!_4p_opposite_points) SERIAL_EOL;
if (!_4p_opposite_points) SERIAL_EOL();
if ((_4p_opposite_points) || _7p_calibration) {
if (_7p_calibration) {
SERIAL_CHAR('.');
@ -5371,7 +5371,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOLPGM(" xy:");
if (z_at_pt[3] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[3], 2);
SERIAL_EOL;
SERIAL_EOL();
}
}
if (test_precision != 0.0) { // !forced end
@ -5384,7 +5384,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOLPGM("std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
}
SERIAL_EOL;
SERIAL_EOL();
LCD_MESSAGEPGM("Calibration OK"); // TODO: Make translatable string
}
else { // !end iterations
@ -5395,7 +5395,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOL_SP(36);
SERIAL_PROTOCOLPGM("std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
SERIAL_EOL;
SERIAL_EOL();
lcd_setstatus(mess);
}
SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
@ -5411,7 +5411,7 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOL_F(endstop_adj[C_AXIS], 2);
SERIAL_PROTOCOLPAIR(" Radius:", delta_radius);
}
SERIAL_EOL;
SERIAL_EOL();
if (_7p_calibration && towers_set) {
SERIAL_PROTOCOLPGM(".Tower angle : Tx:");
if (delta_tower_angle_trim[A_AXIS] >= 0) SERIAL_CHAR('+');
@ -5420,11 +5420,11 @@ void home_all_axes() { gcode_G28(true); }
if (delta_tower_angle_trim[B_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(delta_tower_angle_trim[B_AXIS], 2);
SERIAL_PROTOCOLPGM(" Tz:+0.00");
SERIAL_EOL;
SERIAL_EOL();
}
if (zero_std_dev >= test_precision || zero_std_dev <= calibration_precision)
serialprintPGM(save_message);
SERIAL_EOL;
SERIAL_EOL();
}
else { // forced end
if (verbose_level == 0) {
@ -5432,15 +5432,15 @@ void home_all_axes() { gcode_G28(true); }
SERIAL_PROTOCOL_SP(39);
SERIAL_PROTOCOLPGM("std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
SERIAL_EOL;
SERIAL_EOL();
}
else {
SERIAL_PROTOCOLLNPGM("Calibration OK");
LCD_MESSAGEPGM("Calibration OK"); // TODO: Make translatable string
SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
SERIAL_EOL;
SERIAL_EOL();
serialprintPGM(save_message);
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -5545,7 +5545,7 @@ void home_all_axes() { gcode_G28(true); }
if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i);
// If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Failed to reach target");
}
break;
@ -5685,7 +5685,7 @@ inline void gcode_G92() {
#else
if (!hasP && !hasS && args && *args) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLN(args);
}
@ -5899,7 +5899,7 @@ inline void gcode_M17() {
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!thermalManager.allow_cold_extrude &&
thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_TOO_COLD_FOR_M600);
return false;
}
@ -6232,7 +6232,7 @@ inline void gcode_M31() {
elapsed.toString(buffer);
lcd_setstatus(buffer);
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Print time: ", buffer);
}
@ -6330,7 +6330,7 @@ inline void gcode_M42() {
if (pin_number < 0) return;
if (pin_is_protected(pin_number)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN);
return;
}
@ -6391,12 +6391,12 @@ inline void gcode_M42() {
inline void servo_probe_test() {
#if !(NUM_SERVOS > 0 && HAS_SERVO_0)
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("SERVO not setup");
#elif !HAS_Z_SERVO_ENDSTOP
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Z_ENDSTOP_SERVO_NR not setup");
#else
@ -6832,7 +6832,7 @@ inline void gcode_M42() {
SERIAL_PROTOCOLPGM(" range: ");
SERIAL_PROTOCOL_F(max-min, 3);
}
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -6841,7 +6841,7 @@ inline void gcode_M42() {
if (STOW_PROBE()) return;
SERIAL_PROTOCOLPGM("Finished!");
SERIAL_EOL;
SERIAL_EOL();
if (verbose_level > 0) {
SERIAL_PROTOCOLPGM("Mean: ");
@ -6852,13 +6852,13 @@ inline void gcode_M42() {
SERIAL_PROTOCOL_F(max, 3);
SERIAL_PROTOCOLPGM(" Range: ");
SERIAL_PROTOCOL_F(max-min, 3);
SERIAL_EOL;
SERIAL_EOL();
}
SERIAL_PROTOCOLPGM("Standard Deviation: ");
SERIAL_PROTOCOL_F(sigma, 6);
SERIAL_EOL;
SERIAL_EOL;
SERIAL_EOL();
SERIAL_EOL();
clean_up_after_endstop_or_probe_move();
@ -7014,11 +7014,11 @@ inline void gcode_M105() {
SERIAL_PROTOCOLPGM(MSG_OK);
print_heaterstates();
#else // !HAS_TEMP_HOTEND && !HAS_TEMP_BED
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
@ -7041,7 +7041,7 @@ inline void gcode_M105() {
if (auto_report_temp_interval && ELAPSED(millis(), next_temp_report_ms)) {
next_temp_report_ms = millis() + 1000UL * auto_report_temp_interval;
print_heaterstates();
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -7194,7 +7194,7 @@ inline void gcode_M109() {
SERIAL_PROTOCOLLNPGM("?");
}
#else
SERIAL_EOL;
SERIAL_EOL();
#endif
}
@ -7327,7 +7327,7 @@ inline void gcode_M109() {
SERIAL_PROTOCOLLNPGM("?");
}
#else
SERIAL_EOL;
SERIAL_EOL();
#endif
}
@ -7407,7 +7407,7 @@ inline void gcode_M111() {
#endif
};
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_DEBUG_PREFIX);
if (marlin_debug_flags) {
uint8_t comma = 0;
@ -7421,7 +7421,7 @@ inline void gcode_M111() {
else {
SERIAL_ECHOPGM(MSG_DEBUG_OFF);
}
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(HOST_KEEPALIVE_FEATURE)
@ -7437,7 +7437,7 @@ inline void gcode_M111() {
NOMORE(host_keepalive_interval, 60);
}
else {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("M113 S", (unsigned long)host_keepalive_interval);
}
}
@ -7491,7 +7491,7 @@ inline void gcode_M140() {
inline void gcode_M145() {
uint8_t material = parser.seen('S') ? (uint8_t)parser.value_int() : 0;
if (material >= COUNT(lcd_preheat_hotend_temp)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
}
else {
@ -7697,7 +7697,7 @@ void report_current_position() {
#if IS_SCARA
SERIAL_PROTOCOLPAIR("SCARA Theta:", stepper.get_axis_position_degrees(A_AXIS));
SERIAL_PROTOCOLLNPAIR(" Psi+Theta:", stepper.get_axis_position_degrees(B_AXIS));
SERIAL_EOL;
SERIAL_EOL();
#endif
}
@ -7711,7 +7711,7 @@ void report_current_position() {
SERIAL_CHAR(':');
SERIAL_PROTOCOL(dtostrf(pos[i], 8, precision, str));
}
SERIAL_EOL;
SERIAL_EOL();
}
inline void report_xyz(const float pos[XYZ]) { report_xyze(pos, 3); }
@ -8214,7 +8214,7 @@ inline void gcode_M205() {
if (sumAPX == 1)
home_offset[A_AXIS] = parser.value_float();
else if (sumAPX > 1) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Only one of A, P, or X is allowed.");
return;
}
@ -8224,7 +8224,7 @@ inline void gcode_M205() {
if (sumBTY == 1)
home_offset[B_AXIS] = parser.value_float();
else if (sumBTY > 1) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Only one of B, T, or Y is allowed.");
return;
}
@ -8296,7 +8296,7 @@ inline void gcode_M205() {
* Usage: M211 S1 to enable, M211 S0 to disable, M211 alone for report
*/
inline void gcode_M211() {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
#if HAS_SOFTWARE_ENDSTOPS
if (parser.seen('S')) soft_endstops_enabled = parser.value_bool();
SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS);
@ -8335,7 +8335,7 @@ inline void gcode_M211() {
if (parser.seen('Z')) hotend_offset[Z_AXIS][target_extruder] = parser.value_linear_units();
#endif
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
HOTEND_LOOP() {
SERIAL_CHAR(' ');
@ -8347,7 +8347,7 @@ inline void gcode_M211() {
SERIAL_ECHO(hotend_offset[Z_AXIS][e]);
#endif
}
SERIAL_EOL;
SERIAL_EOL();
}
#endif // HOTENDS > 1
@ -8447,7 +8447,7 @@ inline void gcode_M226() {
i2c.relay(bytes);
}
else {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLN("Bad i2c request");
}
}
@ -8466,13 +8466,13 @@ inline void gcode_M226() {
if (parser.seen('S'))
MOVE_SERVO(servo_index, parser.value_int());
else {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" Servo ", servo_index);
SERIAL_ECHOLNPAIR(": ", servo[servo_index].read());
}
}
else {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ECHOPAIR("Servo ", servo_index);
SERIAL_ECHOLNPGM(" out of range");
}
@ -8528,7 +8528,7 @@ inline void gcode_M226() {
#endif
thermalManager.updatePID();
SERIAL_ECHO_START;
SERIAL_ECHO_START();
#if ENABLED(PID_PARAMS_PER_HOTEND)
SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
#endif // PID_PARAMS_PER_HOTEND
@ -8539,10 +8539,10 @@ inline void gcode_M226() {
//Kc does not have scaling applied above, or in resetting defaults
SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e));
#endif
SERIAL_EOL;
SERIAL_EOL();
}
else {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLN(MSG_INVALID_EXTRUDER);
}
}
@ -8558,7 +8558,7 @@ inline void gcode_M226() {
thermalManager.updatePID();
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" p:", thermalManager.bedKp);
SERIAL_ECHOPAIR(" i:", unscalePID_i(thermalManager.bedKi));
SERIAL_ECHOLNPAIR(" d:", unscalePID_d(thermalManager.bedKd));
@ -8611,7 +8611,7 @@ inline void gcode_M226() {
if (parser.seen('C')) set_lcd_contrast(parser.value_int());
SERIAL_PROTOCOLPGM("lcd contrast value: ");
SERIAL_PROTOCOL(lcd_contrast);
SERIAL_EOL;
SERIAL_EOL();
}
#endif // HAS_LCD_CONTRAST
@ -8644,7 +8644,7 @@ inline void gcode_M226() {
thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0) || parser.value_bool();
else if (!seen_S) {
// Report current state
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Cold extrudes are ", (thermalManager.allow_cold_extrude ? "en" : "dis"));
SERIAL_ECHOPAIR("abled (min temp ", thermalManager.extrude_min_temp);
SERIAL_ECHOLNPGM("C)");
@ -8678,7 +8678,7 @@ inline void gcode_M303() {
KEEPALIVE_STATE(IN_HANDLER);
#else
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M303_DISABLED);
#endif
}
@ -8767,7 +8767,7 @@ inline void gcode_M303() {
break;
#endif
default:
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_INVALID_SOLENOID);
break;
}
@ -8971,11 +8971,11 @@ void quickstop_stepper() {
const bool new_status = leveling_is_active();
if (to_enable && !new_status) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M420_FAILED);
}
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Bed Leveling ", new_status ? MSG_ON : MSG_OFF);
}
#endif
@ -8999,11 +8999,11 @@ void quickstop_stepper() {
const bool hasZ = parser.seen('Z'), hasQ = !hasZ && parser.seen('Q');
if (int(hasI && hasJ) + int(hasX && hasY) != 1 || !(hasZ || hasQ)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
}
else if (ix < 0 || iy < 0) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
else
@ -9027,11 +9027,11 @@ void quickstop_stepper() {
const bool hasZ = parser.seen('Z'), hasQ = !hasZ && parser.seen('Q');
if (!hasI || !hasJ || !(hasZ || hasQ)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
}
else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
else {
@ -9067,11 +9067,11 @@ void quickstop_stepper() {
}
if (int(hasC) + int(hasI && hasJ) != 1 || !(hasZ || hasQ)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
}
else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
}
else
@ -9103,7 +9103,7 @@ void quickstop_stepper() {
set_home_offset((AxisEnum)i, diff);
}
else {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR);
LCD_ALERTMESSAGEPGM("Err: Too far!");
BUZZ(200, 40);
@ -9202,7 +9202,7 @@ inline void gcode_M503() {
}
inline void gcode_M851() {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET " ");
if (parser.seen('Z')) {
const float value = parser.value_linear_units();
@ -9217,7 +9217,7 @@ inline void gcode_M503() {
else
SERIAL_ECHOPAIR(": ", zprobe_zoffset);
SERIAL_EOL;
SERIAL_EOL();
}
#endif // HAS_BED_PROBE
@ -9327,7 +9327,7 @@ inline void gcode_M503() {
case DXC_DUPLICATION_MODE:
if (parser.seen('X')) duplicate_extruder_x_offset = max(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0));
if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
SERIAL_CHAR(' ');
SERIAL_ECHO(hotend_offset[X_AXIS][0]);
@ -9352,7 +9352,7 @@ inline void gcode_M503() {
inline void gcode_M605() {
stepper.synchronize();
extruder_duplication_enabled = parser.seen('S') && parser.value_int() == (int)DXC_DUPLICATION_MODE;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF);
}
@ -9382,12 +9382,12 @@ inline void gcode_M503() {
}
if (newR >= 0) planner.advance_ed_ratio = newR;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Advance K=", planner.extruder_advance_k);
SERIAL_ECHOPGM(" E/D=");
const float ratio = planner.advance_ed_ratio;
if (ratio) SERIAL_ECHO(ratio); else SERIAL_ECHOPGM("Auto");
SERIAL_EOL;
SERIAL_EOL();
}
#endif // LIN_ADVANCE
@ -9407,7 +9407,7 @@ inline void gcode_M503() {
SERIAL_CHAR(name);
SERIAL_ECHOPGM(" axis temperature prewarn triggered: ");
serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false"));
SERIAL_EOL;
SERIAL_EOL();
}
static void tmc2130_clear_otpw(TMC2130Stepper &st, const char name) {
st.clear_otpw();
@ -9690,7 +9690,7 @@ inline void gcode_M355() {
if (args) update_case_light();
// always report case light status
SERIAL_ECHO_START;
SERIAL_ECHO_START();
if (!case_light_on) {
SERIAL_ECHOLN("Case light: off");
}
@ -9700,7 +9700,7 @@ inline void gcode_M355() {
}
#else
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M355_NONE);
#endif // HAS_CASE_LIGHT
}
@ -9799,7 +9799,7 @@ inline void gcode_M999() {
#endif
inline void invalid_extruder_error(const uint8_t &e) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_CHAR('T');
SERIAL_ECHO_F(e, DEC);
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
@ -10120,7 +10120,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif // HOTENDS <= 1
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder);
#endif // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
@ -10138,7 +10138,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> gcode_T(", tmp_extruder);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
DEBUG_POS("BEFORE", current_position);
}
#endif
@ -10173,7 +10173,7 @@ void process_next_command() {
char * const current_command = command_queue[cmd_queue_index_r];
if (DEBUGGING(ECHO)) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLN(current_command);
#if ENABLED(M100_FREE_MEMORY_WATCHER)
SERIAL_ECHOPAIR("slot:", cmd_queue_index_r);
@ -11021,7 +11021,7 @@ void ok_to_send() {
SERIAL_PROTOCOLPGM(" P"); SERIAL_PROTOCOL(int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
SERIAL_PROTOCOLPGM(" B"); SERIAL_PROTOCOL(BUFSIZE - commands_in_queue);
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#if HAS_SOFTWARE_ENDSTOPS
@ -11813,13 +11813,13 @@ void prepare_move_to_destination() {
if (destination[E_AXIS] != current_position[E_AXIS]) {
if (thermalManager.tooColdToExtrude(active_extruder)) {
current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
if (labs(destination[E_AXIS] - current_position[E_AXIS]) > EXTRUDE_MAXLENGTH) {
current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
}
#endif
@ -12300,7 +12300,7 @@ void disable_all_steppers() {
#endif
}
}
SERIAL_EOL;
SERIAL_EOL();
#endif
}
@ -12373,7 +12373,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
const millis_t ms = millis();
if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR(MSG_KILL_INACTIVE_TIME, parser.command_ptr);
kill(PSTR(MSG_KILLED));
}
@ -12424,7 +12424,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
// KILL the machine
// ----------------------------------------------------------------
if (killCount >= KILL_DELAY) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_KILL_BUTTON);
kill(PSTR(MSG_KILLED));
}
@ -12575,7 +12575,7 @@ void idle(
* After this the machine will need to be reset.
*/
void kill(const char* lcd_msg) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
thermalManager.disable_all_heaters();
@ -12618,7 +12618,7 @@ void stop() {
if (IsRunning()) {
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED);
safe_delay(350); // allow enough time for messages to get out before stopping
@ -12666,7 +12666,7 @@ void setup() {
MYSERIAL.begin(BAUDRATE);
SERIAL_PROTOCOLLNPGM("start");
SERIAL_ECHO_START;
SERIAL_ECHO_START();
// Check startup - does nothing if bootloader sets MCUSR to 0
byte mcu = MCUSR;
@ -12680,17 +12680,17 @@ void setup() {
SERIAL_ECHOPGM(MSG_MARLIN);
SERIAL_CHAR(' ');
SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION);
SERIAL_EOL;
SERIAL_EOL();
#if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR)
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR);
SERIAL_ECHOLNPGM("Compiled: " __DATE__);
#endif
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory());
SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE);

View file

@ -109,7 +109,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
SdFile dir;
if (!dir.open(parent, lfilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHOLN(lfilename);
}
@ -208,8 +208,8 @@ void CardReader::ls() {
// Open the sub-item as the new dive parent
SdFile dir;
if (!dir.open(diveDir, segment, O_READ)) {
SERIAL_EOL;
SERIAL_ECHO_START;
SERIAL_EOL();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHO(segment);
break;
@ -220,7 +220,7 @@ void CardReader::ls() {
} // while i<pathLen
SERIAL_EOL;
SERIAL_EOL();
}
#endif // LONG_FILENAME_HOST_SUPPORT
@ -239,20 +239,20 @@ void CardReader::initsd() {
#endif
) {
//if (!card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
}
else if (!volume.init(&card)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
}
else if (!root.openRoot(&volume)) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL);
}
else {
cardOK = true;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_SD_CARD_OK);
}
workDir = root;
@ -331,7 +331,7 @@ void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
if (isFileOpen()) { //replacing current file by new file, or subfile call
if (push_current) {
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
kill(PSTR(MSG_KILLED));
@ -341,7 +341,7 @@ void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
// Store current filename and position
getAbsFilename(proc_filenames[file_subcall_ctr]);
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", name);
SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
SERIAL_ECHOLNPAIR("\" pos", sdpos);
@ -358,7 +358,7 @@ void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
}
if (doing) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Now ");
SERIAL_ECHO(doing == 1 ? "doing" : "fresh");
SERIAL_ECHOLNPAIR(" file: ", name);
@ -421,14 +421,14 @@ void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
else {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL;
SERIAL_EOL();
}
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL;
SERIAL_EOL();
}
else {
saving = true;
@ -462,7 +462,7 @@ void CardReader::removeFile(char* name) {
if (!myDir.open(curDir, subdirname, O_READ)) {
SERIAL_PROTOCOLPAIR("open failed, File: ", subdirname);
SERIAL_PROTOCOLCHAR('.');
SERIAL_EOL;
SERIAL_EOL();
return;
}
else {
@ -526,7 +526,7 @@ void CardReader::write_command(char *buf) {
end[3] = '\0';
file.write(begin);
if (file.writeError) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE);
}
}
@ -617,7 +617,7 @@ void CardReader::chdir(const char * relpath) {
if (workDir.isOpen()) parent = &workDir;
if (!newfile.open(*parent, relpath, O_READ)) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
SERIAL_ECHOLN(relpath);
}

View file

@ -247,7 +247,7 @@ void MarlinSettings::postprocess() {
#define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR)
#define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
#define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
#define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START; SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0)
#define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0)
const char version[4] = EEPROM_VERSION;
@ -267,7 +267,7 @@ void MarlinSettings::postprocess() {
if (v != eeprom_read_byte(p)) {
eeprom_write_byte(p, v);
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
eeprom_error = true;
return;
@ -638,7 +638,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(final_crc);
// Report storage size
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Settings Stored (", eeprom_size - (EEPROM_OFFSET));
SERIAL_ECHOPAIR(" bytes; crc ", final_crc);
SERIAL_ECHOLNPGM(")");
@ -672,7 +672,7 @@ void MarlinSettings::postprocess() {
stored_ver[0] = '?';
stored_ver[1] = '\0';
}
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM("EEPROM version mismatch ");
SERIAL_ECHOPAIR("(EEPROM=", stored_ver);
SERIAL_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")");
@ -981,14 +981,14 @@ void MarlinSettings::postprocess() {
if (working_crc == stored_crc) {
postprocess();
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHO(version);
SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
SERIAL_ECHOPAIR(" bytes; crc ", working_crc);
SERIAL_ECHOLNPGM(")");
}
else {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORPGM("EEPROM CRC mismatch - (stored) ");
SERIAL_ERROR(stored_crc);
SERIAL_ERRORPGM(" != ");
@ -1004,7 +1004,7 @@ void MarlinSettings::postprocess() {
ubl.report_state();
if (!ubl.sanity_check()) {
SERIAL_EOL;
SERIAL_EOL();
ubl.echo_name();
SERIAL_ECHOLNPGM(" initialized.\n");
}
@ -1059,7 +1059,7 @@ void MarlinSettings::postprocess() {
SERIAL_PROTOCOLPAIR("E2END=", E2END);
SERIAL_PROTOCOLPAIR(" meshes_end=", meshes_end);
SERIAL_PROTOCOLLNPAIR(" slot=", slot);
SERIAL_EOL;
SERIAL_EOL();
return;
}
@ -1114,7 +1114,7 @@ void MarlinSettings::postprocess() {
#else // !EEPROM_SETTINGS
bool MarlinSettings::save() {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("EEPROM disabled");
return false;
}
@ -1315,13 +1315,13 @@ void MarlinSettings::reset() {
postprocess();
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
}
#if DISABLED(DISABLE_M503)
#define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START; }while(0)
#define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START(); }while(0)
/**
* M503 - Report current settings in RAM
@ -1365,7 +1365,7 @@ void MarlinSettings::reset() {
#endif
SERIAL_EOL;
SERIAL_EOL();
/**
* Volumetric extrusion M200
@ -1374,30 +1374,30 @@ void MarlinSettings::reset() {
CONFIG_ECHO_START;
SERIAL_ECHOPGM("Filament settings:");
if (volumetric_enabled)
SERIAL_EOL;
SERIAL_EOL();
else
SERIAL_ECHOLNPGM(" Disabled");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
SERIAL_EOL;
SERIAL_EOL();
#if EXTRUDERS > 1
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]);
SERIAL_EOL;
SERIAL_EOL();
#if EXTRUDERS > 2
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
SERIAL_EOL;
SERIAL_EOL();
#if EXTRUDERS > 3
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_EOL;
SERIAL_EOL();
#if EXTRUDERS > 4
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M200 T4 D", filament_size[4]);
SERIAL_EOL;
SERIAL_EOL();
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
@ -1419,7 +1419,7 @@ void MarlinSettings::reset() {
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL;
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) {
@ -1439,7 +1439,7 @@ void MarlinSettings::reset() {
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS]));
#endif
SERIAL_EOL;
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) {
@ -1459,7 +1459,7 @@ void MarlinSettings::reset() {
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS]));
#endif
SERIAL_EOL;
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START;
for (uint8_t i = 0; i < E_STEPPERS; i++) {
@ -1514,7 +1514,7 @@ void MarlinSettings::reset() {
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_NOZZLE)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]));
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1529,7 +1529,7 @@ void MarlinSettings::reset() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif
SERIAL_EOL;
SERIAL_EOL();
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START;
@ -1537,7 +1537,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPGM(" Z");
SERIAL_PROTOCOL_F(LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -1553,17 +1553,17 @@ void MarlinSettings::reset() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", planner.z_fade_height);
#endif
SERIAL_EOL;
SERIAL_EOL();
if (!forReplay) {
SERIAL_EOL;
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.state.storage_slot);
SERIAL_ECHOPGM("z_offset: ");
SERIAL_ECHO_F(ubl.state.z_offset, 6);
SERIAL_EOL;
SERIAL_EOL();
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
@ -1580,7 +1580,7 @@ void MarlinSettings::reset() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif
SERIAL_EOL;
SERIAL_EOL();
#endif
@ -1606,7 +1606,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR(" Z", 0.00);
SERIAL_EOL;
SERIAL_EOL();
#elif ENABLED(Z_DUAL_ENDSTOPS)
if (!forReplay) {
CONFIG_ECHO_START;
@ -1649,7 +1649,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", lpq_len);
#endif
SERIAL_EOL;
SERIAL_EOL();
}
}
else
@ -1664,7 +1664,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
SERIAL_ECHOPAIR(" L", lpq_len);
#endif
SERIAL_EOL;
SERIAL_EOL();
}
#endif // PIDTEMP
@ -1673,7 +1673,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" M304 P", thermalManager.bedKp);
SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bedKi));
SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bedKd));
SERIAL_EOL;
SERIAL_EOL();
#endif
#endif // PIDTEMP || PIDTEMPBED
@ -1773,7 +1773,7 @@ void MarlinSettings::reset() {
#if ENABLED(E3_IS_TMC2130)
SERIAL_ECHOPAIR(" E3", stepperE3.getCurrent());
#endif
SERIAL_EOL;
SERIAL_EOL();
#endif
/**

View file

@ -161,7 +161,7 @@ void Endstops::report_state() {
#define ENDSTOP_HIT_TEST_Y() _ENDSTOP_HIT_TEST(Y,'Y')
#define ENDSTOP_HIT_TEST_Z() _ENDSTOP_HIT_TEST(Z,'Z')
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
ENDSTOP_HIT_TEST_X();
ENDSTOP_HIT_TEST_Y();
@ -171,7 +171,7 @@ void Endstops::report_state() {
#define P_AXIS Z_AXIS
if (TEST(endstop_hit_bits, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
#endif
SERIAL_EOL;
SERIAL_EOL();
#if ENABLED(ULTRA_LCD)
lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);

View file

@ -203,7 +203,7 @@ void GCodeParser::parse(char *p) {
}
#if ENABLED(DEBUG_GCODE_PARSER)
if (debug) SERIAL_EOL;
if (debug) SERIAL_EOL();
#endif
#if ENABLED(FASTER_GCODE_PARSER)
@ -229,10 +229,10 @@ void GCodeParser::parse(char *p) {
}
void GCodeParser::unknown_command_error() {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr);
SERIAL_CHAR('"');
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(DEBUG_GCODE_PARSER)

View file

@ -128,9 +128,7 @@ public:
return b;
}
static volatile bool seen_any() {
return codebits[3] || codebits[2] || codebits[1] || codebits[0];
}
static volatile bool seen_any() { return codebits[3] || codebits[2] || codebits[1] || codebits[0]; }
#define SEEN_TEST(L) TEST(codebits[(L - 'A') >> 3], (L - 'A') & 0x7)
@ -145,9 +143,7 @@ public:
return b;
}
static volatile bool seen_any() {
return *command_args == '\0';
}
static volatile bool seen_any() { return *command_args == '\0'; }
#define SEEN_TEST(L) !!strchr(command_args, L)
@ -207,7 +203,7 @@ public:
#if ENABLED(INCH_MODE_SUPPORT)
inline static void set_input_linear_units(LinearUnit units) {
inline static void set_input_linear_units(const LinearUnit units) {
switch (units) {
case LINEARUNIT_INCH:
linear_unit_factor = 25.4;

View file

@ -163,176 +163,174 @@
#define MSG_USER_MENU _UxGT("Custom Commands")
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29 UBL!")
#endif
#ifndef MSG_UBL_UNHOMED
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29")
#endif
#ifndef MSG_UBL_UNHOMED
#define MSG_UBL_UNHOMED _UxGT("Home XYZ first")
#endif
#ifndef MSG_UBL_TOOLS
#endif
#ifndef MSG_UBL_TOOLS
#define MSG_UBL_TOOLS _UxGT("UBL Tools")
#endif
#ifndef MSG_UBL_LEVEL_BED
#endif
#ifndef MSG_UBL_LEVEL_BED
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#endif
#ifndef MSG_UBL_MANUAL_MESH
#endif
#ifndef MSG_UBL_MANUAL_MESH
#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
#endif
#ifndef MSG_UBL_BC_INSERT
#endif
#ifndef MSG_UBL_BC_INSERT
#define MSG_UBL_BC_INSERT _UxGT("Place shim & measure")
#endif
#ifndef MSG_UBL_BC_INSERT2
#endif
#ifndef MSG_UBL_BC_INSERT2
#define MSG_UBL_BC_INSERT2 _UxGT("Measure")
#endif
#ifndef MSG_UBL_BC_REMOVE
#endif
#ifndef MSG_UBL_BC_REMOVE
#define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed")
#endif
#ifndef MSG_UBL_MOVING_TO_NEXT
#endif
#ifndef MSG_UBL_MOVING_TO_NEXT
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
#endif
#ifndef MSG_UBL_ACTIVATE_MESH
#endif
#ifndef MSG_UBL_ACTIVATE_MESH
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL")
#endif
#ifndef MSG_UBL_DEACTIVATE_MESH
#endif
#ifndef MSG_UBL_DEACTIVATE_MESH
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL")
#endif
#ifndef MSG_UBL_SET_BED_TEMP
#endif
#ifndef MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp")
#endif
#ifndef MSG_UBL_CUSTOM_BED_TEMP
#endif
#ifndef MSG_UBL_CUSTOM_BED_TEMP
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#endif
#ifndef MSG_UBL_SET_HOTEND_TEMP
#endif
#ifndef MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp")
#endif
#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP
#endif
#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#endif
#ifndef MSG_UBL_EDIT_CUSTOM_MESH
#endif
#ifndef MSG_UBL_EDIT_CUSTOM_MESH
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
#endif
#ifndef MSG_UBL_FINE_TUNE_MESH
#endif
#ifndef MSG_UBL_FINE_TUNE_MESH
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
#endif
#ifndef MSG_UBL_DONE_EDITING_MESH
#endif
#ifndef MSG_UBL_DONE_EDITING_MESH
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#endif
#ifndef MSG_UBL_BUILD_CUSTOM_MESH
#endif
#ifndef MSG_UBL_BUILD_CUSTOM_MESH
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
#endif
#ifndef MSG_UBL_BUILD_MESH_MENU
#endif
#ifndef MSG_UBL_BUILD_MESH_MENU
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh")
#endif
#ifndef MSG_UBL_BUILD_PLA_MESH
#endif
#ifndef MSG_UBL_BUILD_PLA_MESH
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh")
#endif
#ifndef MSG_UBL_BUILD_ABS_MESH
#endif
#ifndef MSG_UBL_BUILD_ABS_MESH
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh")
#endif
#ifndef MSG_UBL_BUILD_COLD_MESH
#endif
#ifndef MSG_UBL_BUILD_COLD_MESH
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh")
#endif
#ifndef MSG_UBL_MESH_HEIGHT_ADJUST
#endif
#ifndef MSG_UBL_MESH_HEIGHT_ADJUST
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height")
#endif
#ifndef MSG_UBL_MESH_HEIGHT_AMOUNT
#endif
#ifndef MSG_UBL_MESH_HEIGHT_AMOUNT
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
#endif
#ifndef MSG_UBL_VALIDATE_MESH_MENU
#endif
#ifndef MSG_UBL_VALIDATE_MESH_MENU
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_PLA_MESH
#endif
#ifndef MSG_UBL_VALIDATE_PLA_MESH
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_ABS_MESH
#endif
#ifndef MSG_UBL_VALIDATE_ABS_MESH
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH
#endif
#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#endif
#ifndef MSG_UBL_CONTINUE_MESH
#endif
#ifndef MSG_UBL_CONTINUE_MESH
#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")
#endif
#ifndef MSG_UBL_MESH_LEVELING
#endif
#ifndef MSG_UBL_MESH_LEVELING
#define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling")
#endif
#ifndef MSG_UBL_3POINT_MESH_LEVELING
#endif
#ifndef MSG_UBL_3POINT_MESH_LEVELING
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling")
#endif
#ifndef MSG_UBL_GRID_MESH_LEVELING
#endif
#ifndef MSG_UBL_GRID_MESH_LEVELING
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling")
#endif
#ifndef MSG_UBL_MESH_LEVEL
#endif
#ifndef MSG_UBL_MESH_LEVEL
#define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh")
#endif
#ifndef MSG_UBL_SIDE_POINTS
#endif
#ifndef MSG_UBL_SIDE_POINTS
#define MSG_UBL_SIDE_POINTS _UxGT("Side Points")
#endif
#ifndef MSG_UBL_MAP_TYPE
#endif
#ifndef MSG_UBL_MAP_TYPE
#define MSG_UBL_MAP_TYPE _UxGT("Map Type")
#endif
#ifndef MSG_UBL_OUTPUT_MAP
#endif
#ifndef MSG_UBL_OUTPUT_MAP
#define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map")
#endif
#ifndef MSG_UBL_OUTPUT_MAP_HOST
#endif
#ifndef MSG_UBL_OUTPUT_MAP_HOST
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host")
#endif
#ifndef MSG_UBL_OUTPUT_MAP_CSV
#endif
#ifndef MSG_UBL_OUTPUT_MAP_CSV
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV")
#endif
#ifndef MSG_UBL_INFO_UBL
#endif
#ifndef MSG_UBL_INFO_UBL
#define MSG_UBL_INFO_UBL _UxGT("Output UBL Info")
#endif
#ifndef MSG_UBL_EDIT_MESH_MENU
#endif
#ifndef MSG_UBL_EDIT_MESH_MENU
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Edit Mesh")
#endif
#ifndef MSG_UBL_FILLIN_AMOUNT
#endif
#ifndef MSG_UBL_FILLIN_AMOUNT
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount")
#endif
#ifndef MSG_UBL_MANUAL_FILLIN
#endif
#ifndef MSG_UBL_MANUAL_FILLIN
#define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in")
#endif
#ifndef MSG_UBL_SMART_FILLIN
#endif
#ifndef MSG_UBL_SMART_FILLIN
#define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in")
#endif
#ifndef MSG_UBL_FILLIN_MESH
#endif
#ifndef MSG_UBL_FILLIN_MESH
#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh")
#endif
#ifndef MSG_UBL_INVALIDATE_ALL
#endif
#ifndef MSG_UBL_INVALIDATE_ALL
#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All")
#endif
#ifndef MSG_UBL_INVALIDATE_CLOSEST
#endif
#ifndef MSG_UBL_INVALIDATE_CLOSEST
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest")
#endif
#ifndef MSG_UBL_FINE_TUNE_ALL
#endif
#ifndef MSG_UBL_FINE_TUNE_ALL
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All")
#endif
#ifndef MSG_UBL_FINE_TUNE_CLOSEST
#endif
#ifndef MSG_UBL_FINE_TUNE_CLOSEST
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest")
#endif
#ifndef MSG_UBL_STORAGE_MESH_MENU
#endif
#ifndef MSG_UBL_STORAGE_MESH_MENU
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage")
#endif
#ifndef MSG_UBL_STORAGE_SLOT
#endif
#ifndef MSG_UBL_STORAGE_SLOT
#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
#endif
#ifndef MSG_UBL_LOAD_MESH
#endif
#ifndef MSG_UBL_LOAD_MESH
#define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh")
#endif
#ifndef MSG_UBL_SAVE_MESH
#endif
#ifndef MSG_UBL_SAVE_MESH
#define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh")
#endif
#ifndef MSG_UBL_SAVE_ERROR
#define MSG_UBL_SAVE_ERROR _UxGT("save_UBL_active() error")
#endif
#ifndef MSG_UBL_RESTORE_ERROR
#define MSG_UBL_RESTORE_ERROR _UxGT("restore_UBL_active() error")
#endif
#ifndef MSG_UBL_Z_OFFSET_STOPPED
#endif
#ifndef MSG_UBL_SAVE_ERROR
#define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save")
#endif
#ifndef MSG_UBL_RESTORE_ERROR
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore")
#endif
#ifndef MSG_UBL_Z_OFFSET_STOPPED
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped")
#endif
#endif // AUTO_BED_LEVELING_UBL
#endif
#ifndef MSG_MOVING
#define MSG_MOVING _UxGT("Moving...")

View file

@ -452,7 +452,7 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = t
}
if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report
}
SERIAL_EOL;
SERIAL_EOL();
} // end of IF
} // end of for loop
@ -483,7 +483,7 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = t
}
//if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin
if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report
SERIAL_EOL;
SERIAL_EOL();
}
}

View file

@ -740,7 +740,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
#endif
SERIAL_ECHOPAIR(" (", dc);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
//*/
// DRYRUN ignores all temperature constraints and assures that the extruder is instantly satisfied
@ -766,7 +766,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
position_float[E_AXIS] = e;
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
@ -777,7 +777,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
position_float[E_AXIS] = e;
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
}
#endif
@ -1420,7 +1420,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
block->advance_rate = block->advance = 0;
/**
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM("advance :");
SERIAL_ECHO(block->advance/256.0);
SERIAL_ECHOPGM("advance rate :");

View file

@ -108,7 +108,7 @@ void PrintCounter::showStats() {
SERIAL_ECHO(this->data.totalPrints - this->data.finishedPrints
- ((this->isRunning() || this->isPaused()) ? 1 : 0));
SERIAL_EOL;
SERIAL_EOL();
SERIAL_PROTOCOLPGM(MSG_STATS);
elapsed = this->data.printTime;
@ -135,14 +135,14 @@ void PrintCounter::showStats() {
SERIAL_CHAR(')');
#endif
SERIAL_EOL;
SERIAL_EOL();
SERIAL_PROTOCOLPGM(MSG_STATS);
SERIAL_ECHOPGM("Filament used: ");
SERIAL_ECHO(this->data.filamentUsed / 1000);
SERIAL_ECHOPGM("m");
SERIAL_EOL;
SERIAL_EOL();
}
void PrintCounter::tick() {

View file

@ -41,18 +41,18 @@ extern const char echomagic[] PROGMEM;
extern const char errormagic[] PROGMEM;
#define SERIAL_CHAR(x) (MYSERIAL.write(x))
#define SERIAL_EOL SERIAL_CHAR('\n')
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x)
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y))
#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_PROTOCOLLN(x) do{ MYSERIAL.print(x); SERIAL_EOL; }while(0)
#define SERIAL_PROTOCOLLN(x) do{ MYSERIAL.print(x); SERIAL_EOL(); }while(0)
#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x "\n")))
#define SERIAL_PROTOCOLPAIR(name, value) (serial_echopair_P(PSTR(name),(value)))
#define SERIAL_PROTOCOLLNPAIR(name, value) do{ SERIAL_PROTOCOLPAIR(name, value); SERIAL_EOL; }while(0)
#define SERIAL_PROTOCOLLNPAIR(name, value) do{ SERIAL_PROTOCOLPAIR(name, value); SERIAL_EOL(); }while(0)
#define SERIAL_ECHO_START (serialprintPGM(echomagic))
#define SERIAL_ECHO_START() (serialprintPGM(echomagic))
#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
@ -61,7 +61,7 @@ extern const char errormagic[] PROGMEM;
#define SERIAL_ECHOLNPAIR(name, value) SERIAL_PROTOCOLLNPAIR(name, value)
#define SERIAL_ECHO_F(x,y) SERIAL_PROTOCOL_F(x,y)
#define SERIAL_ERROR_START (serialprintPGM(errormagic))
#define SERIAL_ERROR_START() (serialprintPGM(errormagic))
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)

View file

@ -1305,7 +1305,7 @@ void Stepper::report_positions() {
#endif
SERIAL_PROTOCOL(zpos);
SERIAL_EOL;
SERIAL_EOL();
}
#if ENABLED(BABYSTEPPING)

View file

@ -369,7 +369,7 @@ class Stepper {
}
#endif
// SERIAL_ECHO_START;
// SERIAL_ECHO_START();
// SERIAL_ECHOPGM("advance :");
// SERIAL_ECHO(current_block->advance/256.0);
// SERIAL_ECHOPGM("advance rate :");

View file

@ -103,9 +103,9 @@
void dac_print_values() {
if (!dac_present) return;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("Stepper current values in % (Amps):");
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS));
SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS));

View file

@ -389,7 +389,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
if (ELAPSED(ms, temp_ms + 2000UL)) {
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
print_heaterstates();
SERIAL_EOL;
SERIAL_EOL();
#endif
temp_ms = ms;
@ -404,17 +404,17 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
#if HAS_PID_FOR_BOTH
const char* estring = hotend < 0 ? "bed" : "";
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL();
#elif ENABLED(PIDTEMP)
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL();
#else
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL;
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL();
#endif
#define _SET_BED_PID() do { \
@ -508,7 +508,7 @@ int Temperature::getHeaterPower(int heater) {
void Temperature::_temp_error(int e, const char* serial_msg, const char* lcd_msg) {
static bool killed = false;
if (IsRunning()) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
serialprintPGM(serial_msg);
SERIAL_ERRORPGM(MSG_STOPPED_HEATER);
if (e >= 0) SERIAL_ERRORLN((int)e); else SERIAL_ERRORLNPGM(MSG_HEATER_BED);
@ -619,7 +619,7 @@ float Temperature::get_pid_output(int e) {
#endif // PID_OPENLOOP
#if ENABLED(PID_DEBUG)
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_PID_DEBUG, HOTEND_INDEX);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX]);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output);
@ -629,7 +629,7 @@ float Temperature::get_pid_output(int e) {
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, cTerm[HOTEND_INDEX]);
#endif
SERIAL_EOL;
SERIAL_EOL();
#endif // PID_DEBUG
#else /* PID off */
@ -670,7 +670,7 @@ float Temperature::get_pid_output(int e) {
#endif // PID_OPENLOOP
#if ENABLED(PID_BED_DEBUG)
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM(" PID_BED_DEBUG ");
SERIAL_ECHOPGM(": Input ");
SERIAL_ECHO(current_temperature_bed);
@ -854,7 +854,7 @@ float Temperature::analog2temp(int raw, uint8_t e) {
if (e >= HOTENDS)
#endif
{
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERROR((int)e);
SERIAL_ERRORLNPGM(MSG_INVALID_EXTRUDER_NUM);
kill(PSTR(MSG_KILLED));
@ -1278,7 +1278,7 @@ void Temperature::init() {
static float tr_target_temperature[HOTENDS + 1] = { 0.0 };
/**
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: ");
if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id);
SERIAL_ECHOPAIR(" ; State:", *state);
@ -1289,7 +1289,7 @@ void Temperature::init() {
SERIAL_ECHOPAIR(" ; Idle Timeout:", heater_idle_timeout_exceeded[heater_id]);
else
SERIAL_ECHOPAIR(" ; Idle Timeout:", bed_idle_timeout_exceeded);
SERIAL_EOL;
SERIAL_EOL();
*/
int heater_index = heater_id >= 0 ? heater_id : HOTENDS;
@ -1457,7 +1457,7 @@ void Temperature::disable_all_heaters() {
WRITE(MAX6675_SS, 1); // disable TT_MAX6675
if (max6675_temp & MAX6675_ERROR_MASK) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORPGM("Temp measurement error! ");
#if MAX6675_ERROR_MASK == 7
SERIAL_ERRORPGM("MAX31855 ");

View file

@ -43,7 +43,7 @@ void TWIBus::reset() {
void TWIBus::address(const uint8_t adr) {
if (!WITHIN(adr, 8, 127)) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("Bad I2C address (8-127)");
}
@ -90,7 +90,7 @@ void TWIBus::send() {
// static
void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
SERIAL_ECHO_START;
SERIAL_ECHO_START();
serialprintPGM(prefix);
SERIAL_ECHOPAIR(": from:", adr);
SERIAL_ECHOPAIR(" bytes:", bytes);
@ -101,13 +101,13 @@ void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
void TWIBus::echodata(uint8_t bytes, const char prefix[], uint8_t adr) {
echoprefix(bytes, prefix, adr);
while (bytes-- && Wire.available()) SERIAL_CHAR(Wire.read());
SERIAL_EOL;
SERIAL_EOL();
}
void TWIBus::echobuffer(const char prefix[], uint8_t adr) {
echoprefix(this->buffer_s, prefix, adr);
for (uint8_t i = 0; i < this->buffer_s; i++) SERIAL_CHAR(this->buffer[i]);
SERIAL_EOL;
SERIAL_EOL();
}
bool TWIBus::request(const uint8_t bytes) {

View file

@ -116,11 +116,11 @@
serial_echo_xy(0, GRID_MAX_POINTS_Y - 1);
SERIAL_ECHO_SP(spaces + 3);
serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1);
SERIAL_EOL;
SERIAL_EOL();
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y);
SERIAL_ECHO_SP(spaces);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y);
SERIAL_EOL;
SERIAL_EOL();
}
const float current_xi = get_cell_index_x(current_position[X_AXIS] + (MESH_X_DIST) / 2.0),
@ -154,10 +154,10 @@
SERIAL_CHAR(' ');
}
}
SERIAL_EOL;
SERIAL_EOL();
if (j && map0) { // we want the (0,0) up tight against the block of numbers
SERIAL_CHAR(' ');
SERIAL_EOL;
SERIAL_EOL();
}
}
@ -165,11 +165,11 @@
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y);
SERIAL_ECHO_SP(spaces + 4);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y);
SERIAL_EOL;
SERIAL_EOL();
serial_echo_xy(0, 0);
SERIAL_ECHO_SP(spaces + 5);
serial_echo_xy(GRID_MAX_POINTS_X - 1, 0);
SERIAL_EOL;
SERIAL_EOL();
}
}

View file

@ -256,7 +256,7 @@
SERIAL_ECHOPAIR(",x1_i=", x1_i);
SERIAL_ECHOPAIR(",yi=", yi);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
return NAN;
}
@ -276,7 +276,7 @@
SERIAL_ECHOPAIR(", xi=", xi);
SERIAL_ECHOPAIR(", y1_i=", y1_i);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
return NAN;
}
@ -301,7 +301,7 @@
SERIAL_ECHOPAIR("? in get_z_correction(lx0=", lx0);
SERIAL_ECHOPAIR(", ly0=", ly0);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
#if ENABLED(ULTRA_LCD)
strcpy(lcd_status_message, "get_z_correction() indexes out of range.");
@ -336,7 +336,7 @@
if (DEBUGGING(MESH_ADJUST)) {
SERIAL_ECHOPGM(" >>>---> ");
SERIAL_ECHO_F(z0, 6);
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -352,7 +352,7 @@
SERIAL_CHAR(',');
SERIAL_ECHO(ly0);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
}
#endif
}

View file

@ -406,7 +406,7 @@
}
if (isnan(z1) || isnan(z2) || isnan(z3)) { // probe_pt will return NAN if unreachable
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Attempt to probe off the bed.");
goto LEAVE;
}
@ -643,7 +643,7 @@
SERIAL_ECHO_F(z_values[x][y], 6);
SERIAL_ECHOPAIR(" ; X ", LOGICAL_X_POSITION(mesh_index_to_xpos(x)));
SERIAL_ECHOPAIR(", Y ", LOGICAL_Y_POSITION(mesh_index_to_ypos(y)));
SERIAL_EOL;
SERIAL_EOL();
}
return;
}
@ -766,12 +766,12 @@
SERIAL_ECHOLNPAIR("# of samples: ", n);
SERIAL_ECHOPGM("Mean Mesh Height: ");
SERIAL_ECHO_F(mean, 6);
SERIAL_EOL;
SERIAL_EOL();
const float sigma = sqrt(sum_of_diff_squared / (n + 1));
SERIAL_ECHOPGM("Standard Deviation: ");
SERIAL_ECHO_F(sigma, 6);
SERIAL_EOL;
SERIAL_EOL();
if (g29_c_flag)
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
@ -892,17 +892,17 @@
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPGM("d from 1st point: ");
SERIAL_ECHO_F(d, 6);
SERIAL_EOL;
SERIAL_EOL();
t = normal.x * (UBL_PROBE_PT_2_X) + normal.y * (UBL_PROBE_PT_2_Y);
d = t + normal.z * z2;
SERIAL_ECHOPGM("d from 2nd point: ");
SERIAL_ECHO_F(d, 6);
SERIAL_EOL;
SERIAL_EOL();
t = normal.x * (UBL_PROBE_PT_3_X) + normal.y * (UBL_PROBE_PT_3_Y);
d = t + normal.z * z3;
SERIAL_ECHOPGM("d from 3rd point: ");
SERIAL_ECHO_F(d, 6);
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1080,7 +1080,7 @@
if (g29_verbose_level > 2) {
SERIAL_PROTOCOLPGM("Mesh Point Measured at: ");
SERIAL_PROTOCOL_F(z_values[location.x_index][location.y_index], 6);
SERIAL_EOL;
SERIAL_EOL();
}
} while (location.x_index >= 0 && location.y_index >= 0);
@ -1244,7 +1244,7 @@
SERIAL_PROTOCOLPAIR("Mesh ", state.storage_slot);
SERIAL_PROTOCOLPGM(" Loaded.");
}
SERIAL_EOL;
SERIAL_EOL();
safe_delay(50);
SERIAL_PROTOCOLLNPAIR("UBL object count: ", (int)ubl_cnt);
@ -1252,13 +1252,13 @@
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_PROTOCOL("planner.z_fade_height : ");
SERIAL_PROTOCOL_F(planner.z_fade_height, 4);
SERIAL_EOL;
SERIAL_EOL();
#endif
#if HAS_BED_PROBE
SERIAL_PROTOCOLPGM("zprobe_zoffset: ");
SERIAL_PROTOCOL_F(zprobe_zoffset, 7);
SERIAL_EOL;
SERIAL_EOL();
#endif
SERIAL_ECHOLNPAIR("UBL_MESH_MIN_X " STRINGIFY(UBL_MESH_MIN_X) "=", UBL_MESH_MIN_X);
@ -1280,7 +1280,7 @@
SERIAL_PROTOCOLPGM(" ");
safe_delay(25);
}
SERIAL_EOL;
SERIAL_EOL();
SERIAL_PROTOCOLPGM("Y-Axis Mesh Points at: ");
for (uint8_t i = 0; i < GRID_MAX_POINTS_Y; i++) {
@ -1288,19 +1288,19 @@
SERIAL_PROTOCOLPGM(" ");
safe_delay(25);
}
SERIAL_EOL;
SERIAL_EOL();
#if HAS_KILL
SERIAL_PROTOCOLPAIR("Kill pin on :", KILL_PIN);
SERIAL_PROTOCOLLNPAIR(" state:", READ(KILL_PIN));
#endif
SERIAL_EOL;
SERIAL_EOL();
safe_delay(50);
SERIAL_PROTOCOLLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation);
SERIAL_EOL;
SERIAL_EOL();
SERIAL_PROTOCOLLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk);
SERIAL_EOL;
SERIAL_EOL();
safe_delay(50);
SERIAL_PROTOCOLPAIR("Meshes go from ", hex_address((void*)settings.get_start_of_meshes()));
@ -1308,9 +1308,9 @@
safe_delay(50);
SERIAL_PROTOCOLLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl));
SERIAL_EOL;
SERIAL_EOL();
SERIAL_PROTOCOLLNPAIR("z_value[][] size: ", (int)sizeof(z_values));
SERIAL_EOL;
SERIAL_EOL();
safe_delay(25);
SERIAL_PROTOCOLLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.get_end_of_meshes() - settings.get_start_of_meshes())));
@ -1334,7 +1334,7 @@
unsigned char cccc;
uint16_t kkkk;
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOLNPGM("EEPROM Dump:");
for (uint16_t i = 0; i < E2END + 1; i += 16) {
if (!(i & 0x3)) idle();
@ -1346,9 +1346,9 @@
print_hex_byte(cccc);
SERIAL_ECHO(' ');
}
SERIAL_EOL;
SERIAL_EOL();
}
SERIAL_EOL;
SERIAL_EOL();
}
/**
@ -1667,7 +1667,7 @@
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPGM(" final >>>---> ");
SERIAL_PROTOCOL_F(measured_z, 7);
SERIAL_EOL;
SERIAL_EOL();
}
#endif
@ -1689,7 +1689,7 @@
SERIAL_PROTOCOL_F(lsf_results.B, 7);
SERIAL_ECHOPGM(" D=");
SERIAL_PROTOCOL_F(lsf_results.D, 7);
SERIAL_EOL;
SERIAL_EOL();
}
vector_3 normal = vector_3(lsf_results.A, lsf_results.B, 1.0000).get_normal();
@ -1753,7 +1753,7 @@
SERIAL_PROTOCOL_F(lsf_results.B, 7);
SERIAL_ECHOPGM(" D=");
SERIAL_PROTOCOL_F(lsf_results.D, 7);
SERIAL_EOL;
SERIAL_EOL();
safe_delay(55);
SERIAL_ECHOPGM("bed plane normal = [");
@ -1763,7 +1763,7 @@
SERIAL_PROTOCOLCHAR(',');
SERIAL_PROTOCOL_F(normal.z, 7);
SERIAL_ECHOPGM("]\n");
SERIAL_EOL;
SERIAL_EOL();
}
#endif

View file

@ -97,7 +97,7 @@
debug_echo_axis(E_AXIS);
SERIAL_ECHOPGM(" ) ");
SERIAL_ECHO(title);
SERIAL_EOL;
SERIAL_EOL();
}
@ -131,7 +131,7 @@
SERIAL_ECHOPAIR(", ze=", end[Z_AXIS]);
SERIAL_ECHOPAIR(", ee=", end[E_AXIS]);
SERIAL_CHAR(')');
SERIAL_EOL;
SERIAL_EOL();
debug_current_and_destination(PSTR("Start of ubl.line_to_destination()"));
}

View file

@ -4043,12 +4043,12 @@ void lcd_update() {
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
#if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
SERIAL_ECHO_START;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Enc Step Rate: ", encoderStepRate);
SERIAL_ECHOPAIR(" Multiplier: ", encoderMultiplier);
SERIAL_ECHOPAIR(" ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
SERIAL_ECHOPAIR(" ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
SERIAL_EOL;
SERIAL_EOL();
#endif // ENCODER_RATE_MULTIPLIER_DEBUG
}

View file

@ -89,7 +89,7 @@ void vector_3::debug(const char * const title) {
SERIAL_PROTOCOL_F(y, 6);
SERIAL_PROTOCOLPGM(" z: ");
SERIAL_PROTOCOL_F(z, 6);
SERIAL_EOL;
SERIAL_EOL();
}
void apply_rotation_xyz(matrix_3x3 matrix, float &x, float &y, float &z) {
@ -152,7 +152,7 @@ void matrix_3x3::debug(const char * const title) {
SERIAL_PROTOCOLCHAR(' ');
count++;
}
SERIAL_EOL;
SERIAL_EOL();
}
}

View file

@ -46,7 +46,7 @@ void watchdog_init() {
// Watchdog timer interrupt, called if main program blocks >4sec and manual reset is enabled.
#if ENABLED(WATCHDOG_RESET_MANUAL)
ISR(WDT_vect) {
SERIAL_ERROR_START;
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
kill(PSTR("ERR:Please Reset")); //kill blocks //16 characters so it fits on a 16x2 display
while (1); //wait for user or serial reset