Wanhao Duplicator i3 Plus pins create (#12701)

This commit is contained in:
Ludy 2018-12-21 00:30:36 +01:00 committed by Scott Lahteine
parent 33abb86b7e
commit f7127c44f8
4 changed files with 193 additions and 4 deletions

View file

@ -85,6 +85,7 @@
#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 #define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X #define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X
#define BOARD_FYSETC_F6_13 541 // Fysetc F6 #define BOARD_FYSETC_F6_13 541 // Fysetc F6
#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560
@ -99,6 +100,7 @@
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0 #define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0 #define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1 #define BOARD_MEGATRONICS_31 704 // Megatronics v3.1
#define BOARD_MEGATRONICS_32 705 // Megatronics v3.2
#define BOARD_RAMBO 301 // Rambo #define BOARD_RAMBO 301 // Rambo
#define BOARD_MINIRAMBO 302 // Mini-Rambo #define BOARD_MINIRAMBO 302 // Mini-Rambo
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a #define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a

View file

@ -156,6 +156,8 @@
#include "pins_RAMPS_CREALITY.h" // ATmega2560 env:megaatmega2560 #include "pins_RAMPS_CREALITY.h" // ATmega2560 env:megaatmega2560
#elif MB(FYSETC_F6_13) #elif MB(FYSETC_F6_13)
#include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560 #include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560
#elif MB(DUPLICATOR_I3_PLUS)
#include "pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560
@ -175,7 +177,7 @@
#include "pins_MEGATRONICS.h" // ATmega2560 env:megaatmega2560 #include "pins_MEGATRONICS.h" // ATmega2560 env:megaatmega2560
#elif MB(MEGATRONICS_2) #elif MB(MEGATRONICS_2)
#include "pins_MEGATRONICS_2.h" // ATmega2560 env:megaatmega2560 #include "pins_MEGATRONICS_2.h" // ATmega2560 env:megaatmega2560
#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) #elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) || MB(MEGATRONICS_32)
#include "pins_MEGATRONICS_3.h" // ATmega2560 env:megaatmega2560 #include "pins_MEGATRONICS_3.h" // ATmega2560 env:megaatmega2560
#elif MB(RAMBO) #elif MB(RAMBO)
#include "pins_RAMBO.h" // ATmega2560 env:rambo #include "pins_RAMBO.h" // ATmega2560 env:rambo

View file

@ -0,0 +1,183 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Wanhao Duplicator i3 Plus pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Duplicator i3 Plus"
//
// Limit Switches
//
#define X_STOP_PIN 54 // PF0 / A0
#define Y_STOP_PIN 24 // PA2 / AD2
#define Z_MIN_PIN 23 // PA1 / AD1
#define Z_MAX_PIN 25 // PA3 / AD3
#define SERVO0_PIN 40 // PG1 / !RD
//
// Steppers
//
#define X_STEP_PIN 61 // PF7 / A7
#define X_DIR_PIN 62 // PK0 / A8
#define X_ENABLE_PIN 60 // PF6 / A6
#define Y_STEP_PIN 64 // PK2 / A10
#define Y_DIR_PIN 65 // PK3 / A11
#define Y_ENABLE_PIN 63 // PK1 / A9
#define Z_STEP_PIN 67 // PK5 / A13
#define Z_DIR_PIN 69 // PK7 / A15
#define Z_ENABLE_PIN 66 // PK4 / A12
#define Z_MIN_PROBE_PIN 25 // PA3 / AD3
#define E0_STEP_PIN 58 // PF4 / A4
#define E0_DIR_PIN 59 // PF5 / A5
#define E0_ENABLE_PIN 57 // PF3 / A3
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // PF1 / A1 Analog
#define TEMP_BED_PIN 14 // PK6 / A14 Analog
//
// Heaters / Fans
//
#define HEATER_0_PIN 4 // PG5 / PWM4
#define HEATER_BED_PIN 3 // PE5 / PWM3
#define FAN_PIN 5 // PE3 / PWM5
//
// Misc. Functions
//
#define SDSS 53 // PB0 / SS
#define LED_PIN 13 // PB7 / PWM13
#define MISO_PIN 50 // PB3
#define MOSI_PIN 51 // PB2
#define SCK_PIN 52 // PB1
//
// LCDs and Controllers
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 2
#define LCD_PINS_ENABLE 36
#define LCD_PINS_D4 37
#define LCD_PINS_D5 34
#define LCD_PINS_D6 35
#define LCD_PINS_D7 32
#define ADC_KEYPAD_PIN 12 // Analog
#endif
#endif
/**
* == EXT connector ==
*
* 2 4 6 8 10
* #---------------#
* #2 | ° ° ° ° ° |
* #1 | ° ° ° ° ° |
* #---------------#
* 1 3 5 7 9
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 52 / PG1 (!RD) | 40 #
* # 2 | 95 / PF2 (A2) | 2 #
* # 3 | 54 / PC1 (A9) | 36 #
* # 4 | 53 / PC0 (A8) | 37 #
* # 5 | 56 / PC3 (A11) | 34 #
* # 6 | 55 / PC2 (A10) | 35 #
* # 7 | 58 / PC5 (A13) | 32 #
* # 8 | 57 / PC4 (A12) | 33 #
* # 9 | GND | - #
* # 10 | VCC | + #
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* == Z-probe connector ==
*
* 1 2 3
* #---------#
* | ° ° ° |
* #---------#
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 24V or 5V | + #
* # 2 | 75 / PA3 (AD3) | 25 #
* # 3 | GND | - #
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* == Y-endstop == == Z-endstop == == Bed temperature ==
*
* 1 2 1 2 1 2
* #------# #------# #------#
* | ° ° | | ° ° | | ° ° |
* #------# #------# #------#
*
* ############### Y ################ ############### Z ################ ############## BED ###############
* # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino #
* ################################## ################################## ##################################
* # 1 | GND | - # # 1 | GND | - # # 1 | GND | - #
* # 2 | 76 / PA2 (AD2) | 24 # # 2 | 77 / PA1 (AD1) | 23 # # 2 |83 / PK6 (ADC14)| 14 #
* ################################## ################################## ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* == SPI connector ==
*
* 5 3 1
* #---------#
* | ° ° ° |
* | ° ° ° |
* #---------#
* 6 4 2
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 22 / PB3 (MISO)| 50 #
* # 2 | VCC | + #
* # 3 | 20 / PB1 (SCK) | 52 #
* # 4 | 21 / PB2 (MOSI)| 51 #
* # 5 | 30 / !RESET | RESET #
* # 6 | GND | - #
* ##################################
*
* Pictogram by Ludy https://github.com/Ludy87
* See: https://sebastien.andrivet.com/en/posts/wanhao-duplicator-i3-plus-3d-printer/
*/

View file

@ -21,14 +21,16 @@
*/ */
/** /**
* MegaTronics v3.0 / v3.1 pin assignments * MegaTronics v3.0 / v3.1 / v3.2 pin assignments
*/ */
#ifndef __AVR_ATmega2560__ #ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif #endif
#if MB(MEGATRONICS_31) #if MB(MEGATRONICS_32)
#define BOARD_NAME "Megatronics v3.2"
#elif MB(MEGATRONICS_31)
#define BOARD_NAME "Megatronics v3.1" #define BOARD_NAME "Megatronics v3.1"
#else #else
#define BOARD_NAME "Megatronics v3.0" #define BOARD_NAME "Megatronics v3.0"
@ -161,7 +163,7 @@
#define SHIFT_OUT 34 #define SHIFT_OUT 34
#define SHIFT_EN 44 #define SHIFT_EN 44
#if MB(MEGATRONICS_31) #if MB(MEGATRONICS_31) || MB(MEGATRONICS_32)
#define SD_DETECT_PIN 56 #define SD_DETECT_PIN 56
#endif #endif