diff --git a/Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp b/Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp
index b7130a45c..fb28de415 100644
--- a/Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp
+++ b/Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp
@@ -24,6 +24,7 @@
 
 #include "../../inc/MarlinConfig.h"
 #include "../../Marlin.h"
+#include "backtrace/backtrace.h"
 
 // Debug monitor that dumps to the Programming port all status when
 // an exception or WDT timeout happens - And then resets the board
@@ -57,8 +58,8 @@ static void TXBegin(void) {
   // Configure mode: 8bit, No parity, 1 bit stop
   UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
 
-  // Configure baudrate (asynchronous, no oversampling) to 250000 bauds
-  UART->UART_BRGR = (SystemCoreClock / (250000 << 4));
+  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
+  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
 
   // Enable receiver and transmitter
   UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
@@ -92,6 +93,32 @@ static void TXHex(uint32_t v) {
   }
 }
 
+// Send Decimal number thru UART
+static void TXDec(uint32_t v) {
+  if (!v) {
+    TX('0');
+    return;
+  }
+
+  char nbrs[14];
+  char *p = &nbrs[0];
+  while (v != 0) {
+    *p++ = '0' + (v % 10);
+    v /= 10;
+  }
+  do {
+    p--;
+    TX(*p);
+  } while (p != &nbrs[0]);
+}
+
+// Dump a backtrace entry
+static void backtrace_dump_fn(int idx, const backtrace_t* bte, void* ctx) {
+  TX('#'); TXDec(idx); TX(' ');
+  TX(bte->name); TX('@');TXHex((uint32_t)bte->function); TX('+'); TXDec((uint32_t)bte->address - (uint32_t)bte->function);
+  TX(" PC:");TXHex((uint32_t)bte->address); TX('\n');
+}
+
 /**
  * HardFaultHandler_C:
  * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
@@ -142,6 +169,28 @@ void HardFault_HandlerC(unsigned long *hardfault_args, unsigned long cause) {
   // Bus Fault Address Register
   TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
 
+  // Perform a backtrace
+  TX("\nBacktrace:\n\n");
+  backtrace_frame_t btf;
+  btf.sp = ((unsigned long)hardfault_args[7]);
+  btf.fp = btf.sp;
+  btf.lr = ((unsigned long)hardfault_args[5]);
+  btf.pc = ((unsigned long)hardfault_args[6]);
+  backtrace_dump(&btf, backtrace_dump_fn, nullptr);
+
+  // Disable all NVIC interrupts
+  NVIC->ICER[0] = 0xFFFFFFFF;
+  NVIC->ICER[1] = 0xFFFFFFFF;
+
+  // Relocate VTOR table to default position
+  SCB->VTOR = 0;
+
+  // Disable USB
+  otg_disable();
+
+  // Restart watchdog
+  WDT_Restart(WDT);
+
   // Reset controller
   NVIC_SystemReset();
   while(1) { WDT_Restart(WDT); }
diff --git a/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.c b/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.c
new file mode 100644
index 000000000..8d61b793c
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.c
@@ -0,0 +1,544 @@
+/*
+ * Libbacktrace
+ * Copyright 2015 Stephen Street <stephen@redrocketcomputing.com>
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This library was modified, some bugs fixed, stack address validated
+ * and adapted to be used in Marlin 3D printer firmware as backtracer
+ * for exceptions for debugging purposes in 2018 by Eduardo José Tagle.
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "backtrace.h"
+
+#include <stdint.h>
+#include <string.h>
+
+typedef struct unwind_control_block {
+  uint32_t vrs[16];
+  const uint32_t *current;
+  int remaining;
+  int byte;
+} unwind_control_block_t;
+
+typedef struct unwind_index {
+  uint32_t addr_offset;
+  uint32_t insn;
+} unwind_index_t;
+
+/* These symbols point to the unwind index and should be provide by the linker script */
+extern const unwind_index_t __exidx_start[];
+extern const unwind_index_t __exidx_end[];
+
+/* This prevents the linking of libgcc unwinder code */
+void __aeabi_unwind_cpp_pr0(void) {};
+void __aeabi_unwind_cpp_pr1(void) {};
+void __aeabi_unwind_cpp_pr2(void) {};
+
+/* These symbols point to the start and end of stack */
+extern const int _sstack;
+extern const int _estack;
+
+/* These symbols point to the start and end of the code section */
+extern const int _sfixed;
+extern const int _efixed;
+
+/* These symbols point to the start and end of initialized data (could be SRAM functions!) */
+extern const int _srelocate;
+extern const int _erelocate;
+
+/* Validate stack pointer (SP): It must be in the stack area */
+static inline __attribute__((always_inline)) int validate_sp(const void* sp) {
+  // SP must point into the allocated stack area
+  if ((uint32_t)sp >= (uint32_t)&_sstack && (uint32_t)sp <= (uint32_t)&_estack)
+    return 0;
+  return -1;
+}
+
+/* Validate code pointer (PC): It must be either in TEXT or in SRAM */
+static inline __attribute__((always_inline)) int validate_pc(const void* pc) {
+  // PC must point into the text (CODE) area
+  if ((uint32_t)pc >= (uint32_t)&_sfixed && (uint32_t)pc <= (uint32_t)&_efixed)
+    return 0;
+  // Or into the SRAM function area
+  if ((uint32_t)pc >= (uint32_t)&_srelocate && (uint32_t)pc <= (uint32_t)&_erelocate)
+    return 0;
+  return 0;
+}
+
+static inline __attribute__((always_inline)) uint32_t prel31_to_addr(const uint32_t *prel31) {
+  int32_t offset = (((int32_t)(*prel31)) << 1) >> 1;
+  return ((uint32_t)prel31 + offset) & 0x7fffffff;
+}
+
+static const struct unwind_index *unwind_search_index(const unwind_index_t *start, const unwind_index_t *end, uint32_t ip) {
+  const struct unwind_index *middle;
+
+  /* Perform a binary search of the unwind index */
+  while (start < end - 1) {
+    middle = start + ((end - start + 1) >> 1);
+    if (ip < prel31_to_addr(&middle->addr_offset))
+      end = middle;
+    else
+      start = middle;
+  }
+  return start;
+}
+
+static const char *unwind_get_function_name(void *address) {
+  uint32_t flag_word = *(uint32_t *)(address - 4);
+  if ((flag_word & 0xff000000) == 0xff000000) {
+    return (const char *)(address - 4 - (flag_word & 0x00ffffff));
+  }
+  return "unknown";
+}
+
+static int unwind_get_next_byte(unwind_control_block_t *ucb) {
+  int instruction;
+
+  /* Are there more instructions */
+  if (ucb->remaining == 0)
+    return -1;
+
+  /* Extract the current instruction */
+  instruction = ((*ucb->current) >> (ucb->byte << 3)) & 0xff;
+
+  /* Move the next byte */
+  --ucb->byte;
+  if (ucb->byte < 0) {
+    ++ucb->current;
+    ucb->byte = 3;
+  }
+  --ucb->remaining;
+
+  return instruction;
+}
+
+static int unwind_control_block_init(unwind_control_block_t *ucb, const uint32_t *instructions, const backtrace_frame_t *frame) {
+  /* Initialize control block */
+  memset(ucb, 0, sizeof(unwind_control_block_t));
+  ucb->current = instructions;
+
+  /* Is a short unwind description */
+  if ((*instructions & 0xff000000) == 0x80000000) {
+    ucb->remaining = 3;
+    ucb->byte = 2;
+  /* Is a long unwind description */
+  } else if ((*instructions & 0xff000000) == 0x81000000) {
+    ucb->remaining = ((*instructions & 0x00ff0000) >> 14) + 2;
+    ucb->byte = 1;
+  } else
+    return -1;
+
+  /* Initialize the virtual register set */
+  ucb->vrs[7] = frame->fp;
+  ucb->vrs[13] = frame->sp;
+  ucb->vrs[14] = frame->lr;
+  ucb->vrs[15] = 0;
+
+  /* All good */
+  return 0;
+}
+
+static int unwind_execute_instruction(unwind_control_block_t *ucb) {
+
+  int instruction;
+  uint32_t mask;
+  uint32_t reg;
+  uint32_t *vsp;
+
+  /* Consume all instruction byte */
+  while ((instruction = unwind_get_next_byte(ucb)) != -1) {
+
+    if ((instruction & 0xc0) == 0x00) { // ARM_EXIDX_CMD_DATA_POP
+      /* vsp = vsp + (xxxxxx << 2) + 4 */
+      ucb->vrs[13] += ((instruction & 0x3f) << 2) + 4;
+    } else
+    if ((instruction & 0xc0) == 0x40) { // ARM_EXIDX_CMD_DATA_PUSH
+      /* vsp = vsp - (xxxxxx << 2) - 4 */
+      ucb->vrs[13] -= ((instruction & 0x3f) << 2) - 4;
+    } else
+    if ((instruction & 0xf0) == 0x80) {
+      /* pop under mask {r15-r12},{r11-r4} or refuse to unwind */
+      instruction = instruction << 8 | unwind_get_next_byte(ucb);
+
+      /* Check for refuse to unwind */
+      if (instruction == 0x8000)        // ARM_EXIDX_CMD_REFUSED
+        return 0;
+
+      /* Pop registers using mask */    // ARM_EXIDX_CMD_REG_POP
+      vsp = (uint32_t *)ucb->vrs[13];
+      mask = instruction & 0xfff;
+
+      reg = 4;
+      while (mask) {
+        if ((mask & 1) != 0) {
+          if (validate_sp(vsp))
+            return -1;
+          ucb->vrs[reg] = *vsp++;
+        }
+        mask >>= 1;
+        ++reg;
+      }
+
+      /* Patch up the vrs sp if it was in the mask */
+      if ((instruction & (1 << (13 - 4))) != 0)
+        ucb->vrs[13] = (uint32_t)vsp;
+
+    } else
+    if ((instruction & 0xf0) == 0x90 && // ARM_EXIDX_CMD_REG_TO_SP
+        instruction != 0x9d &&
+        instruction != 0x9f) {
+      /* vsp = r[nnnn] */
+      ucb->vrs[13] = ucb->vrs[instruction & 0x0f];
+    } else
+    if ((instruction & 0xf0) == 0xa0) { // ARM_EXIDX_CMD_REG_POP
+      /* pop r4-r[4+nnn] or pop r4-r[4+nnn], r14*/
+      vsp = (uint32_t *)ucb->vrs[13];
+
+      for (reg = 4; reg <= (instruction & 0x07) + 4; ++reg) {
+        if (validate_sp(vsp))
+          return -1;
+        ucb->vrs[reg] = *vsp++;
+      }
+
+      if (instruction & 0x08) { // ARM_EXIDX_CMD_REG_POP
+        if (validate_sp(vsp))
+          return -1;
+        ucb->vrs[14] = *vsp++;
+      }
+
+      ucb->vrs[13] = (uint32_t)vsp;
+
+    } else
+    if (instruction == 0xb0) { // ARM_EXIDX_CMD_FINISH
+      /* finished */
+      if (ucb->vrs[15] == 0)
+        ucb->vrs[15] = ucb->vrs[14];
+
+      /* All done unwinding */
+      return 0;
+
+    } else
+    if (instruction == 0xb1) { // ARM_EXIDX_CMD_REG_POP
+      /* pop register under mask {r3,r2,r1,r0} */
+      vsp = (uint32_t *)ucb->vrs[13];
+      mask = unwind_get_next_byte(ucb);
+
+      reg = 0;
+      while (mask) {
+        if ((mask & 1) != 0) {
+          if (validate_sp(vsp))
+            return -1;
+          ucb->vrs[reg] = *vsp++;
+        }
+        mask >>= 1;
+        ++reg;
+      }
+      ucb->vrs[13] = (uint32_t)vsp;
+
+    } else
+    if (instruction == 0xb2) { // ARM_EXIDX_CMD_DATA_POP
+      /* vps = vsp + 0x204 + (uleb128 << 2) */
+      ucb->vrs[13] += 0x204 + (unwind_get_next_byte(ucb) << 2);
+
+    } else
+    if (instruction == 0xb3 || // ARM_EXIDX_CMD_VFP_POP
+      instruction == 0xc8 ||
+      instruction == 0xc9) {
+
+      /* pop VFP double-precision registers */
+      vsp = (uint32_t *)ucb->vrs[13];
+
+      /* D[ssss]-D[ssss+cccc] */
+      if (validate_sp(vsp))
+        return -1;
+      ucb->vrs[14] = *vsp++;
+
+      if (instruction == 0xc8) {
+        /* D[16+sssss]-D[16+ssss+cccc] */
+        ucb->vrs[14] |= 1 << 16;
+      }
+
+      if (instruction != 0xb3) {
+        /* D[sssss]-D[ssss+cccc] */
+        ucb->vrs[14] |= 1 << 17;
+      }
+
+      ucb->vrs[13] = (uint32_t)vsp;
+
+    } else
+    if ((instruction & 0xf8) == 0xb8 ||
+        (instruction & 0xf8) == 0xd0) {
+
+      /* Pop VFP double precision registers D[8]-D[8+nnn] */
+      ucb->vrs[14] = 0x80 | (instruction & 0x07);
+
+      if ((instruction & 0xf8) == 0xd0) {
+        ucb->vrs[14] = 1 << 17;
+      }
+
+    } else
+      return -1;
+  }
+
+  return instruction != -1;
+}
+
+static inline __attribute__((always_inline)) uint32_t *read_psp(void) {
+  /* Read the current PSP and return its value as a pointer */
+  uint32_t psp;
+
+  __asm volatile (
+    "   mrs %0, psp \n"
+    : "=r" (psp) : :
+  );
+
+  return (uint32_t*)psp;
+}
+
+static int unwind_frame(backtrace_frame_t *frame) {
+
+  unwind_control_block_t ucb;
+  const unwind_index_t *index;
+  const uint32_t *instructions;
+  int execution_result;
+
+  /* Search the unwind index for the matching unwind table */
+  index = unwind_search_index(__exidx_start, __exidx_end, frame->pc);
+  if (index == NULL)
+    return -1;
+
+  /* Make sure we can unwind this frame */
+  if (index->insn == 0x00000001)
+    return 0;
+
+  /* Get the pointer to the first unwind instruction */
+  if (index->insn & 0x80000000)
+    instructions = &index->insn;
+  else
+    instructions = (uint32_t *)prel31_to_addr(&index->insn);
+
+  /* Initialize the unwind control block */
+  if (unwind_control_block_init(&ucb, instructions, frame) < 0)
+    return -1;
+
+  /* Execute the unwind instructions */
+  while ((execution_result = unwind_execute_instruction(&ucb)) > 0);
+  if (execution_result == -1)
+    return -1;
+
+  /* Set the virtual pc to the virtual lr if this is the first unwind */
+  if (ucb.vrs[15] == 0)
+    ucb.vrs[15] = ucb.vrs[14];
+
+  /* Check for exception return */
+  /* TODO Test with other ARM processors to verify this method. */
+  if ((ucb.vrs[15] & 0xf0000000) == 0xf0000000) {
+    /* According to the Cortex Programming Manual (p.44), the stack address is always 8-byte aligned (Cortex-M7).
+       Depending on where the exception came from (MSP or PSP), we need the right SP value to work with.
+
+       ucb.vrs[7] contains the right value, so take it and align it by 8 bytes, store it as the current
+       SP to work with (ucb.vrs[13]) which is then saved as the current (virtual) frame's SP.
+    */
+    uint32_t *stack;
+    ucb.vrs[13] = (ucb.vrs[7] & ~7);
+
+    /* If we need to start from the MSP, we need to go down X words to find the PC, where:
+        X=2  if it was a non-floating-point exception
+        X=20 if it was a floating-point (VFP) exception
+
+       If we need to start from the PSP, we need to go up exactly 6 words to find the PC.
+       See the ARMv7-M Architecture Reference Manual p.594 and Cortex-M7 Processor Programming Manual p.44/p.45 for details.
+    */
+    if ((ucb.vrs[15] & 0xc) == 0) {
+      /* Return to Handler Mode: MSP (0xffffff-1) */
+      stack = (uint32_t*)(ucb.vrs[13]);
+
+      /* The PC is always 2 words down from the MSP, if it was a non-floating-point exception */
+      stack -= 2;
+
+      /* If there was a VFP exception (0xffffffe1), the PC is located another 18 words down */
+      if ((ucb.vrs[15] & 0xf0) == 0xe0) {
+        stack -= 18;
+      }
+    }
+    else {
+      /* Return to Thread Mode: PSP (0xffffff-d) */
+      stack = read_psp();
+
+      /* The PC is always 6 words up from the PSP */
+      stack += 6;
+    }
+
+    /* Store the PC */
+    ucb.vrs[15] = *stack--;
+
+    /* Store the LR */
+    ucb.vrs[14] = *stack--;
+  }
+
+  /* We are done if current frame pc is equal to the virtual pc, prevent infinite loop */
+  if (frame->pc == ucb.vrs[15])
+    return 0;
+
+  /* Update the frame */
+  frame->fp = ucb.vrs[7];
+  frame->sp = ucb.vrs[13];
+  frame->lr = ucb.vrs[14];
+  frame->pc = ucb.vrs[15];
+
+  /* All good */
+  return 1;
+}
+
+// Detect if function names are available
+static int __attribute__ ((noinline)) has_function_names(void) {
+  uint32_t flag_word = ((uint32_t*)&has_function_names)[-1];
+  return ((flag_word & 0xff000000) == 0xff000000) ? 1 : 0;
+}
+
+// Detect if unwind information is present or not
+static int has_unwind_info(void) {
+  return ((char*)(&__exidx_end) - (char*)(&__exidx_start)) > 16 ? 1 : 0; // 16 because there are default entries we can´t supress
+}
+
+int backtrace_dump(backtrace_frame_t *frame, backtrace_dump_fn_t dump_entry, void* ctx )
+{
+  backtrace_t entry;
+  int count = 1;
+
+  /* If there is no unwind information, perform a RAW try at it. Idea was taken from
+   * https://stackoverflow.com/questions/3398664/how-to-get-a-call-stack-backtrace-deeply-embedded-no-library-support
+   *
+   * And requires code to be compiled with the following flags:
+   * -mtpcs-frame -mtpcs-leaf-frame -fno-omit-frame-pointer
+   *  With these options, the Stack pointer is automatically
+   * pushed to the stack at the beginning of each function.
+   */
+  if (!has_unwind_info()) {
+
+    /*
+     *  We basically iterate through the current stack finding the
+     * following combination of values:
+     *  - <Frame Address>
+     *  - <Link Address>
+     * This combination will occur for each function in the call stack
+     */
+
+    uint32_t previous_frame_address = (uint32_t)frame->sp;
+    uint32_t* stack_pointer = (uint32_t*)frame->sp;
+
+    // loop following stack frames
+    while (1) {
+
+      // Validate stack address
+      if (validate_sp(stack_pointer))
+        break;
+
+      // Attempt to obtain next stack pointer
+      // The link address should come immediately after
+      const uint32_t possible_frame_address = *stack_pointer;
+      const uint32_t possible_link_address = *(stack_pointer+1);
+
+      // Next check that the frame addresss (i.e. stack pointer for the function)
+      // and Link address are within an acceptable range
+      if(possible_frame_address > previous_frame_address &&
+         validate_sp((const void *)possible_frame_address) == 0 &&
+        (possible_link_address & 1) != 0 && // in THUMB mode the address will be odd
+         validate_pc((const void *)possible_link_address) == 0) {
+
+        // We found two acceptable values.
+        entry.name = "unknown";
+        entry.address = (void*)possible_link_address;
+        entry.function = 0;
+
+        // If there are function names, try to solve name
+        if (has_function_names()) {
+          // Lets find the function name, if possible
+
+          // Align address to 4 bytes
+          uint32_t* pf = (uint32_t*) (((uint32_t)possible_link_address) & (-4));
+
+          // Scan backwards until we find the function name
+          while(validate_pc(pf-1) == 0) {
+
+            // Get name descriptor value
+            uint32_t v = pf[-1];
+
+            // Check if name descriptor is valid and name is terminated in 0.
+            if ((v & 0xffffff00) == 0xff000000 &&
+                (v & 0xff) > 1) {
+
+              // Assume the name was found!
+              entry.name = ((const char*)pf) - 4 - (v & 0xff);
+              entry.function = (void*)pf;
+              break;
+            }
+
+            // Go backwards to the previous word
+            --pf;
+          }
+        }
+        dump_entry(count, &entry, ctx);
+        ++count;
+
+        // Update the book-keeping registers for the next search
+        previous_frame_address = possible_frame_address;
+        stack_pointer = (uint32_t*)(possible_frame_address + 4);
+
+      } else {
+        // Keep iterating through the stack until we find an acceptable combination
+        ++stack_pointer;
+      }
+    }
+
+  } else {
+
+    /* Otherwise, unwind information is present. Use it to unwind frames */
+    do {
+      if (frame->pc == 0) {
+        /* Reached __exidx_end. */
+        entry.name = "<reached end of unwind table>";
+        entry.address = 0;
+        entry.function = 0;
+        dump_entry(count, &entry, ctx);
+        break;
+      }
+
+      if (frame->pc == 0x00000001) {
+        /* Reached .cantunwind instruction. */
+        entry.name = "<reached .cantunwind>";
+        entry.address = 0;
+        entry.function = 0;
+        dump_entry(count, &entry, ctx);
+        break;
+      }
+
+      /* Find the unwind index of the current frame pc */
+      const unwind_index_t *index = unwind_search_index(__exidx_start, __exidx_end, frame->pc);
+
+      /* Clear last bit (Thumb indicator) */
+      frame->pc &= 0xfffffffeU;
+
+      /* Generate the backtrace information */
+      entry.address = (void *)frame->pc;
+      entry.function = (void *)prel31_to_addr(&index->addr_offset);
+      entry.name = unwind_get_function_name(entry.function);
+      dump_entry(count, &entry, ctx);
+
+      /* Next backtrace frame */
+      ++count;
+
+    } while (unwind_frame(frame) == 1);
+  }
+
+  /* All done */
+  return count;
+}
+
+#endif
diff --git a/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.h b/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.h
new file mode 100644
index 000000000..855bc35d1
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/backtrace/backtrace.h
@@ -0,0 +1,53 @@
+/*
+ * Libbacktrace
+ * Copyright 2015 Stephen Street <stephen@redrocketcomputing.com>
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This library was modified and adapted to be used in Marlin 3D printer
+ * firmware as backtracer for exceptions for debugging purposes in 2018
+ * by Eduardo José Tagle.
+ */
+
+/*
+ * For this library to work, you need to compile with the following options
+ * -funwind-tables => So we will have unwind information to perform the stack trace
+ * -mpoke-function-name => So we will have function names in the trace
+ */
+
+#ifndef _BACKTRACE_H_
+#define _BACKTRACE_H_
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* A frame */
+typedef struct backtrace_frame {
+  uint32_t fp;
+  uint32_t sp;
+  uint32_t lr;
+  uint32_t pc;
+} backtrace_frame_t;
+
+/* A backtrace */
+typedef struct backtrace {
+  void *function;
+  void *address;
+  const char *name;
+} backtrace_t;
+
+typedef void (*backtrace_dump_fn_t)(int idx, const backtrace_t* bte, void* ctx);
+
+/* Perform a backtrace, given the specified stack start frame */
+int backtrace_dump(backtrace_frame_t *startframe, backtrace_dump_fn_t fn, void* ctx );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _BACKTRACE_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_task.c b/Marlin/src/HAL/HAL_DUE/usb/usb_task.c
index 468385b50..528db591c 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/usb_task.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_task.c
@@ -301,7 +301,11 @@ void usb_task_init(void) {
 
   uint16_t *ptr;
 
+  // Disable USB peripheral so we start clean and avoid lockups
+  otg_disable();
   udd_disable();
+
+  // Set the USB interrupt to our stack
   UDD_SetStack(&USBD_ISR);
 
   // Start USB stack to authorize VBus monitoring
diff --git a/platformio.ini b/platformio.ini
index 1f5015395..e809b009c 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -97,6 +97,18 @@ lib_deps     = ${common.lib_deps}
 lib_ignore   = c1921b4
 src_filter   = ${common.default_src_filter}
 monitor_baud = 250000
+[env:DUE_debug]
+# Used when WATCHDOG_RESET_MANUAL is enabled
+platform     = atmelsam
+framework    = arduino
+board        = due
+build_flags  = ${common.build_flags}
+  -funwind-tables 
+  -mpoke-function-name
+lib_deps     = ${common.lib_deps}
+lib_ignore   = c1921b4
+src_filter   = ${common.default_src_filter}
+monitor_baud = 250000
 
 #
 # NXP LPC1768 ARM Cortex-M3