Add Support for ADIMLab Granty

This commit is contained in:
Scott Lahteine 2019-08-21 05:05:44 -05:00 committed by Scott Lahteine
parent de122c9bbe
commit f7aac7a5b0
2 changed files with 146 additions and 169 deletions

View file

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -19,29 +19,25 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HJC2560-C Rev2.x pin assignments
*/
/**
* Rev 2.x 2 Aug 2018
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
// BOARD Info
#define DEFAULT_MACHINE_NAME "HCMaker7"
#define BOARD_NAME "HJC2560-C"
#define BOARD_REV "Rev: 2.1" //主板版本Rev 2.1, Rs=0.05R
#define R_SENSOR "R-sensor: R050" //检测电阻
// FIRMWARE Info
#define FIRMWARE_NAME "Marlin 1-1-9"
#define FIRMWARE_REV "Rev: 1.4" //固件版本Rev 1.4
#define BOARD_INFO_NAME "HJC2560-C"
//
// Servos
//
//#ifndef SERVO0_PIN
// #define SERVO0_PIN 11
//#endif
//
// Limit Switches
@ -49,7 +45,7 @@
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
#define EXP_STOP_PIN 28
//#define EXP_STOP_PIN 28
//
// Steppers
@ -97,9 +93,9 @@
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
//#ifndef FAN_PIN
#ifndef FAN_PIN
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴如果需要则取消注释
//#endif
#endif
//
// Misc. Functions
@ -108,49 +104,55 @@
#define SD_DETECT_PIN 39
//#define LED_PIN 8
#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED如果需要PWM FAN,则需要将FAN_PIN置为7LED_PIN置为8
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#endif
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if HAS_SPI_LCD
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
#define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_ENABLE 15 // LCD_SDA
#define LCD_PINS_D4 14 // LCD_SCK
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
//#ifndef LCD_CONTRAST_PIN
// #define LCD_CONTRAST_PIN 5 // LCD_Contrast
//#endif
// define digital pin 24 for the filament runout sensor.
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 24 // Filament runout
#endif
#else
#define LCD_PINS_RS 20 //LCD_CS
#define LCD_PINS_ENABLE 15 //LCD_SDA
#define LCD_PINS_D4 14 //LCD_SCK
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#endif
// buttons are directly attached
#define BTN_EN1 41
#define BTN_EN2 40
#define BTN_ENC 19
#define SD_DETECT_PIN 39
#else // !NEWPANEL - Old style panel with shift register
#else
// buttons are attached to a shift register
// Buttons attached to a shift register
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
@ -163,31 +165,6 @@
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#define SD_DETECT_PIN -1
#endif // !NEWPANEL
#endif // ULTRA_LCD
//
// M3/M4/M5 - Spindle/Laser Control默认主轴/激光器使用独立的PWM引脚(D9)控制
// 如果使用了PWM_FAN,Case_Light和Spindle/Laser, 并希望Spindle/Laser使用CASE_Light的线则将
//SPINDLE_LASER_PWM_PIN 定义为8
//
#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
// #undef LED_PIN
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
//#else
// #undef LED_PIN
// #define CASE_LIGHT_PIN 7
#endif
//
// Servos
//
//#ifndef SERVO0_PIN
// #define SERVO0_PIN 11
//#endif
#endif // HAS_SPI_LCD