Update MMU2 code style
This commit is contained in:
Scott Lahteine
parent
c8a83fb122
commit
fae2b7edc3
9 changed files with 124 additions and 124 deletions
|
|
@ -723,7 +723,7 @@ void idle(
|
|||
#endif
|
||||
|
||||
#if ENABLED(PRUSA_MMU2)
|
||||
mmu2.mmuLoop();
|
||||
mmu2.mmu_loop();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -90,7 +90,7 @@ bool MMU2::enabled, MMU2::ready, MMU2::mmu_print_saved;
|
|||
uint8_t MMU2::cmd, MMU2::cmd_arg, MMU2::last_cmd, MMU2::extruder;
|
||||
int8_t MMU2::state = 0;
|
||||
volatile int8_t MMU2::finda = 1;
|
||||
volatile bool MMU2::findaRunoutValid;
|
||||
volatile bool MMU2::finda_runout_valid;
|
||||
int16_t MMU2::version = -1, MMU2::buildnr = -1;
|
||||
millis_t MMU2::last_request, MMU2::next_P0_request;
|
||||
char MMU2::rx_buffer[16], MMU2::tx_buffer[16];
|
||||
|
|
@ -103,7 +103,7 @@ char MMU2::rx_buffer[16], MMU2::tx_buffer[16];
|
|||
};
|
||||
|
||||
static constexpr E_Step ramming_sequence[] PROGMEM = { MMU2_RAMMING_SEQUENCE };
|
||||
static constexpr E_Step loadToNozzle_sequence[] PROGMEM = { MMU2_LOAD_TO_NOZZLE_SEQUENCE };
|
||||
static constexpr E_Step load_to_nozzle_sequence[] PROGMEM = { MMU2_LOAD_TO_NOZZLE_SEQUENCE };
|
||||
|
||||
#endif // MMU2_MENUS
|
||||
|
||||
|
|
@ -142,11 +142,11 @@ void MMU2::reset() {
|
|||
#endif
|
||||
}
|
||||
|
||||
uint8_t MMU2::getCurrentTool() {
|
||||
uint8_t MMU2::get_current_tool() {
|
||||
return extruder == MMU2_NO_TOOL ? -1 : extruder;
|
||||
}
|
||||
|
||||
void MMU2::mmuLoop() {
|
||||
void MMU2::mmu_loop() {
|
||||
|
||||
switch (state) {
|
||||
|
||||
|
|
@ -185,7 +185,7 @@ void MMU2::mmuLoop() {
|
|||
|
||||
DEBUG_ECHOLNPAIR("MMU => ", buildnr);
|
||||
|
||||
checkVersion();
|
||||
check_version();
|
||||
|
||||
#if ENABLED(MMU2_MODE_12V)
|
||||
DEBUG_ECHOLNPGM("MMU <= 'M1'");
|
||||
|
|
@ -207,7 +207,7 @@ void MMU2::mmuLoop() {
|
|||
if (rx_ok()) {
|
||||
DEBUG_ECHOLNPGM("MMU => ok");
|
||||
|
||||
checkVersion();
|
||||
check_version();
|
||||
|
||||
DEBUG_ECHOLNPGM("MMU <= 'P0'");
|
||||
|
||||
|
|
@ -294,13 +294,13 @@ void MMU2::mmuLoop() {
|
|||
sscanf(rx_buffer, "%hhuok\n", &finda);
|
||||
|
||||
// This is super annoying. Only activate if necessary
|
||||
// if (findaRunoutValid) DEBUG_ECHOLNPAIR_F("MMU <= 'P0'\nMMU => ", finda, 6);
|
||||
// if (finda_runout_valid) DEBUG_ECHOLNPAIR_F("MMU <= 'P0'\nMMU => ", finda, 6);
|
||||
|
||||
state = 1;
|
||||
|
||||
if (cmd == 0) ready = true;
|
||||
|
||||
if (!finda && findaRunoutValid) filamentRunout();
|
||||
if (!finda && finda_runout_valid) filament_runout();
|
||||
}
|
||||
else if (ELAPSED(millis(), last_request + MMU_P0_TIMEOUT)) // Resend request after timeout (30s)
|
||||
state = 1;
|
||||
|
|
@ -434,7 +434,7 @@ bool MMU2::rx_ok() {
|
|||
/**
|
||||
* Check if MMU has compatible firmware
|
||||
*/
|
||||
void MMU2::checkVersion() {
|
||||
void MMU2::check_version() {
|
||||
if (buildnr < MMU_REQUIRED_FW_BUILDNR) {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ECHOPGM("MMU2 firmware version invalid. Required version >= ");
|
||||
|
|
@ -447,7 +447,7 @@ void MMU2::checkVersion() {
|
|||
/**
|
||||
* Handle tool change
|
||||
*/
|
||||
void MMU2::toolChange(uint8_t index) {
|
||||
void MMU2::tool_change(uint8_t index) {
|
||||
|
||||
if (!enabled) return;
|
||||
|
||||
|
|
@ -461,7 +461,7 @@ void MMU2::toolChange(uint8_t index) {
|
|||
|
||||
command(MMU_CMD_T0 + index);
|
||||
|
||||
manageResponse(true, true);
|
||||
manage_response(true, true);
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
command(MMU_CMD_C0);
|
||||
|
|
@ -490,7 +490,7 @@ void MMU2::toolChange(uint8_t index) {
|
|||
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
|
||||
*
|
||||
*/
|
||||
void MMU2::toolChange(const char* special) {
|
||||
void MMU2::tool_change(const char* special) {
|
||||
|
||||
if (!enabled) return;
|
||||
|
||||
|
|
@ -501,19 +501,19 @@ void MMU2::toolChange(const char* special) {
|
|||
|
||||
switch (*special) {
|
||||
case '?': {
|
||||
uint8_t index = mmu2_chooseFilament();
|
||||
uint8_t index = mmu2_choose_filament();
|
||||
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
|
||||
loadFilamentToNozzle(index);
|
||||
load_filament_to_nozzle(index);
|
||||
} break;
|
||||
|
||||
case 'x': {
|
||||
planner.synchronize();
|
||||
uint8_t index = mmu2_chooseFilament();
|
||||
uint8_t index = mmu2_choose_filament();
|
||||
disable_E0();
|
||||
command(MMU_CMD_T0 + index);
|
||||
manageResponse(true, true);
|
||||
manage_response(true, true);
|
||||
command(MMU_CMD_C0);
|
||||
mmuLoop();
|
||||
mmu_loop();
|
||||
|
||||
enable_E0();
|
||||
extruder = index;
|
||||
|
|
@ -522,7 +522,7 @@ void MMU2::toolChange(const char* special) {
|
|||
|
||||
case 'c': {
|
||||
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
|
||||
executeExtruderSequence((const E_Step *)loadToNozzle_sequence, COUNT(loadToNozzle_sequence));
|
||||
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence));
|
||||
} break;
|
||||
}
|
||||
|
||||
|
|
@ -547,7 +547,7 @@ void MMU2::command(const uint8_t mmu_cmd) {
|
|||
/**
|
||||
* Wait for response from MMU
|
||||
*/
|
||||
bool MMU2::getResponse(void) {
|
||||
bool MMU2::get_response(void) {
|
||||
while (cmd != MMU_CMD_NONE) idle();
|
||||
|
||||
while (!ready) {
|
||||
|
|
@ -565,7 +565,7 @@ bool MMU2::getResponse(void) {
|
|||
/**
|
||||
* Wait for response and deal with timeout if nexcessary
|
||||
*/
|
||||
void MMU2::manageResponse(bool move_axes, bool turn_off_nozzle) {
|
||||
void MMU2::manage_response(bool move_axes, bool turn_off_nozzle) {
|
||||
|
||||
bool response = false;
|
||||
mmu_print_saved = false;
|
||||
|
|
@ -575,7 +575,7 @@ void MMU2::manageResponse(bool move_axes, bool turn_off_nozzle) {
|
|||
|
||||
while (!response) {
|
||||
|
||||
response = getResponse(); //wait for "ok" from mmu
|
||||
response = get_response(); //wait for "ok" from mmu
|
||||
|
||||
if (!response) { //no "ok" was received in reserved time frame, user will fix the issue on mmu unit
|
||||
if (!mmu_print_saved) { //first occurence, we are saving current position, park print head in certain position and disable nozzle heater
|
||||
|
|
@ -636,7 +636,7 @@ void MMU2::manageResponse(bool move_axes, bool turn_off_nozzle) {
|
|||
}
|
||||
}
|
||||
|
||||
void MMU2::setFilamentType(uint8_t index, uint8_t filamentType) {
|
||||
void MMU2::set_filament_type(uint8_t index, uint8_t filamentType) {
|
||||
if (!enabled) return;
|
||||
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
|
@ -644,12 +644,12 @@ void MMU2::setFilamentType(uint8_t index, uint8_t filamentType) {
|
|||
cmd_arg = filamentType;
|
||||
command(MMU_CMD_F0 + index);
|
||||
|
||||
manageResponse(true, true);
|
||||
manage_response(true, true);
|
||||
|
||||
KEEPALIVE_STATE(NOT_BUSY);
|
||||
}
|
||||
|
||||
void MMU2::filamentRunout() {
|
||||
void MMU2::filament_runout() {
|
||||
enqueue_and_echo_commands_P(PSTR(MMU2_FILAMENT_RUNOUT_SCRIPT));
|
||||
planner.synchronize();
|
||||
}
|
||||
|
|
@ -657,10 +657,10 @@ void MMU2::filamentRunout() {
|
|||
#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
|
||||
|
||||
// Load filament into MMU2
|
||||
void MMU2::loadFilament(uint8_t index) {
|
||||
void MMU2::load_filament(uint8_t index) {
|
||||
if (!enabled) return;
|
||||
command(MMU_CMD_L0 + index);
|
||||
manageResponse(false, false);
|
||||
manage_response(false, false);
|
||||
BUZZ(200, 404);
|
||||
}
|
||||
|
||||
|
|
@ -669,7 +669,7 @@ void MMU2::filamentRunout() {
|
|||
* Switch material and load to nozzle
|
||||
*
|
||||
*/
|
||||
bool MMU2::loadFilamentToNozzle(uint8_t index) {
|
||||
bool MMU2::load_filament_to_nozzle(uint8_t index) {
|
||||
|
||||
if (!enabled) return false;
|
||||
|
||||
|
|
@ -682,14 +682,14 @@ void MMU2::filamentRunout() {
|
|||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
command(MMU_CMD_T0 + index);
|
||||
manageResponse(true, true);
|
||||
manage_response(true, true);
|
||||
command(MMU_CMD_C0);
|
||||
mmuLoop();
|
||||
mmu_loop();
|
||||
|
||||
extruder = index;
|
||||
active_extruder = 0;
|
||||
|
||||
loadToNozzle();
|
||||
load_to_nozzle();
|
||||
|
||||
BUZZ(200, 404);
|
||||
|
||||
|
|
@ -706,12 +706,12 @@ void MMU2::filamentRunout() {
|
|||
* It is not used after T0 .. T4 command (select filament), in such case, gcode is responsible for loading
|
||||
* filament to nozzle.
|
||||
*/
|
||||
void MMU2::loadToNozzle() {
|
||||
void MMU2::load_to_nozzle() {
|
||||
if (!enabled) return;
|
||||
executeExtruderSequence((const E_Step *)loadToNozzle_sequence, COUNT(loadToNozzle_sequence));
|
||||
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence));
|
||||
}
|
||||
|
||||
bool MMU2::ejectFilament(uint8_t index, bool recover) {
|
||||
bool MMU2::eject_filament(uint8_t index, bool recover) {
|
||||
|
||||
if (!enabled) return false;
|
||||
|
||||
|
|
@ -731,7 +731,7 @@ void MMU2::filamentRunout() {
|
|||
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2500 / 60, active_extruder);
|
||||
planner.synchronize();
|
||||
command(MMU_CMD_E0 + index);
|
||||
manageResponse(false, false);
|
||||
manage_response(false, false);
|
||||
|
||||
if (recover) {
|
||||
LCD_MESSAGEPGM(MSG_MMU2_EJECT_RECOVER);
|
||||
|
|
@ -745,7 +745,7 @@ void MMU2::filamentRunout() {
|
|||
BUZZ(200, 404);
|
||||
|
||||
command(MMU_CMD_R0);
|
||||
manageResponse(false, false);
|
||||
manage_response(false, false);
|
||||
}
|
||||
|
||||
ui.reset_status();
|
||||
|
|
@ -783,10 +783,10 @@ void MMU2::filamentRunout() {
|
|||
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
filamentRamming();
|
||||
filament_ramming();
|
||||
|
||||
command(MMU_CMD_U0);
|
||||
manageResponse(false, true);
|
||||
manage_response(false, true);
|
||||
|
||||
BUZZ(200, 404);
|
||||
|
||||
|
|
@ -803,11 +803,11 @@ void MMU2::filamentRunout() {
|
|||
/**
|
||||
* Unload sequence to optimize shape of the tip of the unloaded filament
|
||||
*/
|
||||
void MMU2::filamentRamming() {
|
||||
executeExtruderSequence((const E_Step *)ramming_sequence, sizeof(ramming_sequence) / sizeof(E_Step));
|
||||
void MMU2::filament_ramming() {
|
||||
execute_extruder_sequence((const E_Step *)ramming_sequence, sizeof(ramming_sequence) / sizeof(E_Step));
|
||||
}
|
||||
|
||||
void MMU2::executeExtruderSequence(const E_Step * sequence, int steps) {
|
||||
void MMU2::execute_extruder_sequence(const E_Step * sequence, int steps) {
|
||||
|
||||
planner.synchronize();
|
||||
enable_E0();
|
||||
|
|
|
|||
|
|
@ -36,18 +36,18 @@ public:
|
|||
|
||||
static void init();
|
||||
static void reset();
|
||||
static void mmuLoop();
|
||||
static void toolChange(uint8_t index);
|
||||
static void toolChange(const char* special);
|
||||
static uint8_t getCurrentTool();
|
||||
static void setFilamentType(uint8_t index, uint8_t type);
|
||||
static void mmu_loop();
|
||||
static void tool_change(uint8_t index);
|
||||
static void tool_change(const char* special);
|
||||
static uint8_t get_current_tool();
|
||||
static void set_filament_type(uint8_t index, uint8_t type);
|
||||
|
||||
#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
|
||||
static bool unload();
|
||||
static void loadFilament(uint8_t);
|
||||
static void loadAll();
|
||||
static bool loadFilamentToNozzle(uint8_t index);
|
||||
static bool ejectFilament(uint8_t index, bool recover);
|
||||
static void load_filament(uint8_t);
|
||||
static void load_all();
|
||||
static bool load_filament_to_nozzle(uint8_t index);
|
||||
static bool eject_filament(uint8_t index, bool recover);
|
||||
#endif
|
||||
|
||||
private:
|
||||
|
|
@ -59,31 +59,31 @@ private:
|
|||
|
||||
static bool rx_ok();
|
||||
static bool rx_start();
|
||||
static void checkVersion();
|
||||
static void check_version();
|
||||
|
||||
static void command(const uint8_t cmd);
|
||||
static bool getResponse(void);
|
||||
static void manageResponse(bool move_axes, bool turn_off_nozzle);
|
||||
static bool get_response(void);
|
||||
static void manage_response(bool move_axes, bool turn_off_nozzle);
|
||||
|
||||
#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
|
||||
static void loadToNozzle();
|
||||
static void filamentRamming();
|
||||
static void executeExtruderSequence(const E_Step * sequence, int steps);
|
||||
static void load_to_nozzle();
|
||||
static void filament_ramming();
|
||||
static void execute_extruder_sequence(const E_Step * sequence, int steps);
|
||||
#endif
|
||||
|
||||
static void filamentRunout();
|
||||
static void filament_runout();
|
||||
|
||||
static bool enabled, ready, mmu_print_saved;
|
||||
static uint8_t cmd, cmd_arg, last_cmd, extruder;
|
||||
static int8_t state;
|
||||
static volatile int8_t finda;
|
||||
static volatile bool findaRunoutValid;
|
||||
static volatile bool finda_runout_valid;
|
||||
static int16_t version, buildnr;
|
||||
static millis_t last_request, next_P0_request;
|
||||
static char rx_buffer[16], tx_buffer[16];
|
||||
|
||||
static inline void set_runout_valid(const bool valid) {
|
||||
findaRunoutValid = valid;
|
||||
finda_runout_valid = valid;
|
||||
#if HAS_FILAMENT_SENSOR
|
||||
if (valid) runout.reset();
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ void GcodeSuite::T(const uint8_t tool_index) {
|
|||
|
||||
#if ENABLED(PRUSA_MMU2)
|
||||
if (parser.string_arg) {
|
||||
mmu2.toolChange(parser.string_arg); // Special commands T?/Tx/Tc
|
||||
mmu2.tool_change(parser.string_arg); // Special commands T?/Tx/Tc
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ void GcodeSuite::M701() {
|
|||
|
||||
// Load filament
|
||||
#if ENABLED(PRUSA_MMU2)
|
||||
mmu2.loadFilamentToNozzle(target_extruder);
|
||||
mmu2.load_filament_to_nozzle(target_extruder);
|
||||
#else
|
||||
constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
|
||||
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ void GcodeSuite::M403() {
|
|||
type = parser.intval('F', -1);
|
||||
|
||||
if (WITHIN(index, 0, 4) && WITHIN(type, 0, 2))
|
||||
mmu2.setFilamentType(index, type);
|
||||
mmu2.set_filament_type(index, type);
|
||||
else
|
||||
SERIAL_ECHO_MSG("M403 - bad arguments.");
|
||||
}
|
||||
|
|
|
|||
|
|
@ -35,60 +35,60 @@ bool mmuMenuWait;
|
|||
// Load Filament
|
||||
//
|
||||
|
||||
void _mmu2_loadFilamentToNozzle(uint8_t index) {
|
||||
void _mmu2_load_filamentToNozzle(uint8_t index) {
|
||||
ui.reset_status();
|
||||
ui.return_to_status();
|
||||
ui.status_printf_P(0, PSTR(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
|
||||
if (mmu2.loadFilamentToNozzle(index)) ui.reset_status();
|
||||
if (mmu2.load_filament_to_nozzle(index)) ui.reset_status();
|
||||
}
|
||||
|
||||
inline void action_mmu2_loadFilamentToNozzle(const uint8_t tool) {
|
||||
_mmu2_loadFilamentToNozzle(tool);
|
||||
inline void action_mmu2_load_filament_to_nozzl_e(const uint8_t tool) {
|
||||
_mmu2_load_filamentToNozzle(tool);
|
||||
ui.return_to_status();
|
||||
}
|
||||
inline void action_mmu2_loadFilamentToNozzle0() { action_mmu2_loadFilamentToNozzle(0); }
|
||||
inline void action_mmu2_loadFilamentToNozzle1() { action_mmu2_loadFilamentToNozzle(1); }
|
||||
inline void action_mmu2_loadFilamentToNozzle2() { action_mmu2_loadFilamentToNozzle(2); }
|
||||
inline void action_mmu2_loadFilamentToNozzle3() { action_mmu2_loadFilamentToNozzle(3); }
|
||||
inline void action_mmu2_loadFilamentToNozzle4() { action_mmu2_loadFilamentToNozzle(4); }
|
||||
inline void action_mmu2_load_filament_to_nozzle_0() { action_mmu2_load_filament_to_nozzl_e(0); }
|
||||
inline void action_mmu2_load_filament_to_nozzle_1() { action_mmu2_load_filament_to_nozzl_e(1); }
|
||||
inline void action_mmu2_load_filament_to_nozzle_2() { action_mmu2_load_filament_to_nozzl_e(2); }
|
||||
inline void action_mmu2_load_filament_to_nozzle_3() { action_mmu2_load_filament_to_nozzl_e(3); }
|
||||
inline void action_mmu2_load_filament_to_nozzle_4() { action_mmu2_load_filament_to_nozzl_e(4); }
|
||||
|
||||
void _mmu2_loadFilament(uint8_t index) {
|
||||
void _mmu2_load_filament(uint8_t index) {
|
||||
ui.return_to_status();
|
||||
ui.status_printf_P(0, PSTR(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
|
||||
mmu2.loadFilament(index);
|
||||
mmu2.load_filament(index);
|
||||
ui.reset_status();
|
||||
}
|
||||
void action_mmu2_loadAll() {
|
||||
void action_mmu2_load_all() {
|
||||
for (uint8_t i = 0; i < EXTRUDERS; i++)
|
||||
_mmu2_loadFilament(i);
|
||||
_mmu2_load_filament(i);
|
||||
ui.return_to_status();
|
||||
}
|
||||
inline void action_mmu2_loadFilament0() { _mmu2_loadFilament(0); }
|
||||
inline void action_mmu2_loadFilament1() { _mmu2_loadFilament(1); }
|
||||
inline void action_mmu2_loadFilament2() { _mmu2_loadFilament(2); }
|
||||
inline void action_mmu2_loadFilament3() { _mmu2_loadFilament(3); }
|
||||
inline void action_mmu2_loadFilament4() { _mmu2_loadFilament(4); }
|
||||
inline void action_mmu2_load_filament_0() { _mmu2_load_filament(0); }
|
||||
inline void action_mmu2_load_filament_1() { _mmu2_load_filament(1); }
|
||||
inline void action_mmu2_load_filament_2() { _mmu2_load_filament(2); }
|
||||
inline void action_mmu2_load_filament_3() { _mmu2_load_filament(3); }
|
||||
inline void action_mmu2_load_filament_4() { _mmu2_load_filament(4); }
|
||||
|
||||
void menu_mmu2_loadFilament() {
|
||||
void menu_mmu2_load_filament() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MMU2_MENU);
|
||||
MENU_ITEM(function, MSG_MMU2_ALL, action_mmu2_loadAll);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_loadFilament0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_loadFilament1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_loadFilament2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_loadFilament3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_loadFilament4);
|
||||
MENU_ITEM(function, MSG_MMU2_ALL, action_mmu2_load_all);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_load_filament_0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_load_filament_1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_load_filament_2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_load_filament_3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_load_filament_4);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void menu_mmu2_loadToNozzle() {
|
||||
void menu_mmu2_load_to_nozzle() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MMU2_MENU);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_loadFilamentToNozzle0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_loadFilamentToNozzle1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_loadFilamentToNozzle2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_loadFilamentToNozzle3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_loadFilamentToNozzle4);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_load_filament_to_nozzle_0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_load_filament_to_nozzle_1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_load_filament_to_nozzle_2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_load_filament_to_nozzle_3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_load_filament_to_nozzle_4);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
|
|
@ -96,19 +96,19 @@ void menu_mmu2_loadToNozzle() {
|
|||
// Eject Filament
|
||||
//
|
||||
|
||||
void _mmu2_ejectFilament(uint8_t index) {
|
||||
void _mmu2_eject_filament(uint8_t index) {
|
||||
ui.reset_status();
|
||||
ui.return_to_status();
|
||||
ui.status_printf_P(0, PSTR(MSG_MMU2_EJECTING_FILAMENT), int(index + 1));
|
||||
if (mmu2.ejectFilament(index, true)) ui.reset_status();
|
||||
if (mmu2.eject_filament(index, true)) ui.reset_status();
|
||||
}
|
||||
inline void action_mmu2_ejectFilament0() { _mmu2_ejectFilament(0); }
|
||||
inline void action_mmu2_ejectFilament1() { _mmu2_ejectFilament(1); }
|
||||
inline void action_mmu2_ejectFilament2() { _mmu2_ejectFilament(2); }
|
||||
inline void action_mmu2_ejectFilament3() { _mmu2_ejectFilament(3); }
|
||||
inline void action_mmu2_ejectFilament4() { _mmu2_ejectFilament(4); }
|
||||
inline void action_mmu2_eject_filament_0() { _mmu2_eject_filament(0); }
|
||||
inline void action_mmu2_eject_filament_1() { _mmu2_eject_filament(1); }
|
||||
inline void action_mmu2_eject_filament_2() { _mmu2_eject_filament(2); }
|
||||
inline void action_mmu2_eject_filament_3() { _mmu2_eject_filament(3); }
|
||||
inline void action_mmu2_eject_filament_4() { _mmu2_eject_filament(4); }
|
||||
|
||||
void action_mmu2_unloadFilament() {
|
||||
void action_mmu2_unload_filament() {
|
||||
ui.reset_status();
|
||||
ui.return_to_status();
|
||||
LCD_MESSAGEPGM(MSG_MMU2_UNLOADING_FILAMENT);
|
||||
|
|
@ -116,14 +116,14 @@ void action_mmu2_unloadFilament() {
|
|||
if (mmu2.unload()) ui.reset_status();
|
||||
}
|
||||
|
||||
void menu_mmu2_ejectFilament() {
|
||||
void menu_mmu2_eject_filament() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MMU2_MENU);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_ejectFilament0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_ejectFilament1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_ejectFilament2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_ejectFilament3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_ejectFilament4);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_eject_filament_0);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_eject_filament_1);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_eject_filament_2);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_eject_filament_3);
|
||||
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_eject_filament_4);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
|
|
@ -139,10 +139,10 @@ void action_mmu2_reset() {
|
|||
void menu_mmu2() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MAIN);
|
||||
MENU_ITEM(submenu, MSG_MMU2_LOAD_FILAMENT, menu_mmu2_loadFilament);
|
||||
MENU_ITEM(submenu, MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_loadToNozzle);
|
||||
MENU_ITEM(submenu, MSG_MMU2_EJECT_FILAMENT, menu_mmu2_ejectFilament);
|
||||
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unloadFilament);
|
||||
MENU_ITEM(submenu, MSG_MMU2_LOAD_FILAMENT, menu_mmu2_load_filament);
|
||||
MENU_ITEM(submenu, MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_load_to_nozzle);
|
||||
MENU_ITEM(submenu, MSG_MMU2_EJECT_FILAMENT, menu_mmu2_eject_filament);
|
||||
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unload_filament);
|
||||
MENU_ITEM(function, MSG_MMU2_RESET, action_mmu2_reset);
|
||||
END_MENU();
|
||||
}
|
||||
|
|
@ -161,7 +161,7 @@ inline void action_mmu2_choose2() { action_mmu2_choose(2); }
|
|||
inline void action_mmu2_choose3() { action_mmu2_choose(3); }
|
||||
inline void action_mmu2_choose4() { action_mmu2_choose(4); }
|
||||
|
||||
void menu_mmu2_chooseFilament() {
|
||||
void menu_mmu2_choose_filament() {
|
||||
START_MENU();
|
||||
#if LCD_HEIGHT > 2
|
||||
STATIC_ITEM(MSG_MMU2_CHOOSE_FILAMENT_HEADER, true, true);
|
||||
|
|
@ -178,21 +178,21 @@ void menu_mmu2_chooseFilament() {
|
|||
// MMU2 Filament Runout
|
||||
//
|
||||
|
||||
inline void action_mmu2_M600_loadCurrentFilament() { mmu2.loadFilament(currentTool); }
|
||||
inline void action_mmu2_M600_loadCurrentFilamentToNozzle() { mmu2.loadFilamentToNozzle(currentTool); }
|
||||
inline void action_mmu2_M600_unloadFilament() { mmu2.unload(); }
|
||||
inline void action_mmu2_M600_load_current_filament() { mmu2.load_filament(currentTool); }
|
||||
inline void action_mmu2_M600_load_current_filament_to_nozzle() { mmu2.load_filament_to_nozzle(currentTool); }
|
||||
inline void action_mmu2_M600_unload_filament() { mmu2.unload(); }
|
||||
inline void action_mmu2_M600_resume() { mmuMenuWait = false; }
|
||||
|
||||
void menu_mmu2_pause() {
|
||||
currentTool = mmu2.getCurrentTool();
|
||||
currentTool = mmu2.get_current_tool();
|
||||
START_MENU();
|
||||
#if LCD_HEIGHT > 2
|
||||
STATIC_ITEM(MSG_MMU2_FILAMENT_CHANGE_HEADER, true, true);
|
||||
#endif
|
||||
MENU_ITEM(function, MSG_MMU2_RESUME, action_mmu2_M600_resume);
|
||||
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unloadFilament);
|
||||
MENU_ITEM(function, MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_loadCurrentFilament);
|
||||
MENU_ITEM(function, MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_loadCurrentFilamentToNozzle);
|
||||
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unload_filament);
|
||||
MENU_ITEM(function, MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_load_current_filament);
|
||||
MENU_ITEM(function, MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_load_current_filament_to_nozzle);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
|
|
@ -203,9 +203,9 @@ void mmu2_M600() {
|
|||
while (mmuMenuWait) idle();
|
||||
}
|
||||
|
||||
uint8_t mmu2_chooseFilament() {
|
||||
uint8_t mmu2_choose_filament() {
|
||||
ui.defer_status_screen();
|
||||
ui.goto_screen(menu_mmu2_chooseFilament);
|
||||
ui.goto_screen(menu_mmu2_choose_filament);
|
||||
mmuMenuWait = true;
|
||||
while (mmuMenuWait) idle();
|
||||
ui.return_to_status();
|
||||
|
|
|
|||
|
|
@ -25,4 +25,4 @@
|
|||
|
||||
void menu_mmu2();
|
||||
void mmu2_M600();
|
||||
uint8_t mmu2_chooseFilament();
|
||||
uint8_t mmu2_choose_filament();
|
||||
|
|
|
|||
|
|
@ -577,7 +577,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
|
|||
|
||||
UNUSED(fr_mm_s); UNUSED(no_move);
|
||||
|
||||
mmu2.toolChange(tmp_extruder);
|
||||
mmu2.tool_change(tmp_extruder);
|
||||
|
||||
#elif EXTRUDERS < 2
|
||||
|
||||
|
|
@ -777,7 +777,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
|
|||
#endif
|
||||
|
||||
#if ENABLED(PRUSA_MMU2)
|
||||
mmu2.toolChange(tmp_extruder);
|
||||
mmu2.tool_change(tmp_extruder);
|
||||
#endif
|
||||
|
||||
#if SWITCHING_NOZZLE_TWO_SERVOS
|
||||
|
|
|
|||
Reference in a new issue