SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Simplify stepper driver per-axis selection

Browse source
This commit is contained in:
teemuatlut 2018-07-14 14:13:06 +03:00 committed by Scott Lahteine
parent e5c0b490c8
commit fbcdf5eaeb
26 changed files with 744 additions and 837 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

23
Marlin/Configuration.h
View file

@ -551,6 +551,29 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
/**
* Specify Stepper Driver types
* The options are used to determine driver pulse timings as well as more advanced functionality.
* Stepper timing options can be overridden in Configuration_adv.h
*
* Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
* TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
* TMC5130, TMC5130_STANDALONE
* :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
*/
#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE A4988
#define X2_DRIVER_TYPE A4988
#define Y2_DRIVER_TYPE A4988
#define Z2_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988
#define E1_DRIVER_TYPE A4988
#define E2_DRIVER_TYPE A4988
#define E3_DRIVER_TYPE A4988
#define E4_DRIVER_TYPE A4988
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE

125
Marlin/Configuration_adv.h
View file

@ -837,15 +837,17 @@
/** /**
* Minimum delay after setting the stepper DIR (in ns) * Minimum delay after setting the stepper DIR (in ns)
* 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
* 20 : Minimum for TMC2xxx drivers * 20 : Minimum for TMC2xxx drivers
* 200 : Minimum for A4988 drivers * 200 : Minimum for A4988 drivers
* 500 : Minimum for LV8729 drivers (guess, no info in datasheet) * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
* 650 : Minimum for DRV8825 drivers * 650 : Minimum for DRV8825 drivers
* 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
*15000 : Minimum for TB6560 drivers (guess, no info in datasheet) * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MINIMUM_STEPPER_DIR_DELAY 0 //#define MINIMUM_STEPPER_DIR_DELAY 650
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
@ -855,8 +857,10 @@
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MINIMUM_STEPPER_PULSE 2 //#define MINIMUM_STEPPER_PULSE 2
/** /**
* Maximum stepping rate (in Hz) the stepper driver allows * Maximum stepping rate (in Hz) the stepper driver allows
@ -867,8 +871,10 @@
* 150000 : Maximum for TB6600 stepper driver * 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver * 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver * 15000 : Maximum for TB6560 stepper driver
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MAXIMUM_STEPPER_RATE 250000 //#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
@ -1036,23 +1042,12 @@
// @section tmc // @section tmc
/** /**
* Enable this section if you have TMC26X motor drivers. * TMC26X Stepper Driver options
* You will need to import the TMC26XStepper library into the Arduino IDE for this *
* (https://github.com/trinamic/TMC26XStepper.git) * The TMC26XStepper library is required for this stepper driver.
* https://github.com/trinamic/TMC26XStepper
*/ */
//#define HAVE_TMC26X #if HAS_DRIVER(TMC26X)
#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory!
//#define X_IS_TMC26X
//#define X2_IS_TMC26X
//#define Y_IS_TMC26X
//#define Y2_IS_TMC26X
//#define Z_IS_TMC26X
//#define Z2_IS_TMC26X
//#define E0_IS_TMC26X
//#define E1_IS_TMC26X
//#define E2_IS_TMC26X
//#define E3_IS_TMC26X
//#define E4_IS_TMC26X
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -1098,62 +1093,29 @@
#define E4_SENSE_RESISTOR 91 #define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
#endif #endif // TMC26X
// @section tmc_smart // @section tmc_smart
/** /**
* Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
*
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
* To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins. * You may also use software SPI if you wish to use general purpose IO pins.
*/ *
//#define HAVE_TMC2130 * The TMC2130Stepper library is required for this stepper driver.
#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! * https://github.com/teemuatlut/TMC2130Stepper
//#define X_IS_TMC2130 *
//#define X2_IS_TMC2130 * To use TMC2208 stepper UART-configurable stepper drivers
//#define Y_IS_TMC2130 * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
//#define Y2_IS_TMC2130
//#define Z_IS_TMC2130
//#define Z2_IS_TMC2130
//#define E0_IS_TMC2130
//#define E1_IS_TMC2130
//#define E2_IS_TMC2130
//#define E3_IS_TMC2130
//#define E4_IS_TMC2130
#endif
/**
* Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
* Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
* To use the reading capabilities, also connect #_SERIAL_RX_PIN * To use the reading capabilities, also connect #_SERIAL_RX_PIN
* to PDN_UART without a resistor. * to PDN_UART without a resistor.
* The drivers can also be used with hardware serial. * The drivers can also be used with hardware serial.
* *
* You'll also need the TMC2208Stepper Arduino library * The TMC2208Stepper library is required for this stepper driver.
* (https://github.com/teemuatlut/TMC2208Stepper). * https://github.com/teemuatlut/TMC2208Stepper
*/ */
//#define HAVE_TMC2208 #if HAS_TRINAMIC
#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory!
//#define X_IS_TMC2208
//#define X2_IS_TMC2208
//#define Y_IS_TMC2208
//#define Y2_IS_TMC2208
//#define Z_IS_TMC2208
//#define Z2_IS_TMC2208
//#define E0_IS_TMC2208
//#define E1_IS_TMC2208
//#define E2_IS_TMC2208
//#define E3_IS_TMC2208
//#define E4_IS_TMC2208
#endif
#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
#define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -1308,25 +1270,12 @@
// @section L6470 // @section L6470
/** /**
* Enable this section if you have L6470 motor drivers. * L6470 Stepper Driver options
* You need to import the L6470 library into the Arduino IDE for this. *
* (https://github.com/ameyer/Arduino-L6470) * The Arduino-L6470 library is required for this stepper driver.
* https://github.com/ameyer/Arduino-L6470
*/ */
#if HAS_DRIVER(L6470)
//#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)
//#define X_IS_L6470
//#define X2_IS_L6470
//#define Y_IS_L6470
//#define Y2_IS_L6470
//#define Z_IS_L6470
//#define Z2_IS_L6470
//#define E0_IS_L6470
//#define E1_IS_L6470
//#define E2_IS_L6470
//#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@ -1372,7 +1321,7 @@
#define E4_OVERCURRENT 2000 #define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500 #define E4_STALLCURRENT 1500
#endif #endif // L6470
/** /**
* TWI/I2C BUS * TWI/I2C BUS

2
Marlin/src/HAL/HAL_AVR/SanityCheck.h
View file

@ -99,7 +99,7 @@
/** /**
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI) * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
*/ */
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \ #if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
defined(X_HARDWARE_SERIAL ) \ defined(X_HARDWARE_SERIAL ) \
|| defined(X2_HARDWARE_SERIAL) \ || defined(X2_HARDWARE_SERIAL) \
|| defined(Y_HARDWARE_SERIAL ) \ || defined(Y_HARDWARE_SERIAL ) \

2
Marlin/src/HAL/HAL_DUE/SanityCheck.h
View file

@ -41,7 +41,7 @@
*/ */
#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN)) #define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
#if ENABLED(SDSUPPORT) && ENABLED(HAVE_TMC2130) #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
#if ENABLED(TMC_USE_SW_SPI) #if ENABLED(TMC_USE_SW_SPI)
#if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK)) #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
#error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs." #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."

2
Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
View file

@ -66,7 +66,7 @@
#endif #endif
#endif // SPINDLE_LASER_ENABLE #endif // SPINDLE_LASER_ENABLE
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(HAVE_TMC2130) && DISABLED(TMC_USE_SW_SPI) \ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) \
&& (MB(RAMPS_14_RE_ARM_EFB) \ && (MB(RAMPS_14_RE_ARM_EFB) \
|| MB(RAMPS_14_RE_ARM_EEB) \ || MB(RAMPS_14_RE_ARM_EEB) \
|| MB(RAMPS_14_RE_ARM_EFF) \ || MB(RAMPS_14_RE_ARM_EFF) \

4
Marlin/src/Marlin.cpp
View file

@ -712,10 +712,10 @@ void setup() {
SERIAL_PROTOCOLLNPGM("start"); SERIAL_PROTOCOLLNPGM("start");
SERIAL_ECHO_START(); SERIAL_ECHO_START();
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
tmc_init_cs_pins(); tmc_init_cs_pins();
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
tmc2208_serial_begin(); tmc2208_serial_begin();
#endif #endif

23
Marlin/src/config/default/Configuration.h
View file

@ -551,6 +551,29 @@
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
/**
* Specify Stepper Driver types
* The options are used to determine driver pulse timings as well as more advanced functionality.
* Stepper timing options can be overridden in Configuration_adv.h
*
* Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
* TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
* TMC5130, TMC5130_STANDALONE
* :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
*/
#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE A4988
#define X2_DRIVER_TYPE A4988
#define Y2_DRIVER_TYPE A4988
#define Z2_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988
#define E1_DRIVER_TYPE A4988
#define E2_DRIVER_TYPE A4988
#define E3_DRIVER_TYPE A4988
#define E4_DRIVER_TYPE A4988
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
//#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE

125
Marlin/src/config/default/Configuration_adv.h
View file

@ -837,15 +837,17 @@
/** /**
* Minimum delay after setting the stepper DIR (in ns) * Minimum delay after setting the stepper DIR (in ns)
* 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
* 20 : Minimum for TMC2xxx drivers * 20 : Minimum for TMC2xxx drivers
* 200 : Minimum for A4988 drivers * 200 : Minimum for A4988 drivers
* 500 : Minimum for LV8729 drivers (guess, no info in datasheet) * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
* 650 : Minimum for DRV8825 drivers * 650 : Minimum for DRV8825 drivers
* 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
*15000 : Minimum for TB6560 drivers (guess, no info in datasheet) * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MINIMUM_STEPPER_DIR_DELAY 0 //#define MINIMUM_STEPPER_DIR_DELAY 650
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
@ -855,8 +857,10 @@
* 2 : Minimum for DRV8825 stepper drivers * 2 : Minimum for DRV8825 stepper drivers
* 3 : Minimum for TB6600 stepper drivers * 3 : Minimum for TB6600 stepper drivers
* 30 : Minimum for TB6560 stepper drivers * 30 : Minimum for TB6560 stepper drivers
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MINIMUM_STEPPER_PULSE 2 //#define MINIMUM_STEPPER_PULSE 2
/** /**
* Maximum stepping rate (in Hz) the stepper driver allows * Maximum stepping rate (in Hz) the stepper driver allows
@ -867,8 +871,10 @@
* 150000 : Maximum for TB6600 stepper driver * 150000 : Maximum for TB6600 stepper driver
* 130000 : Maximum for LV8729 stepper driver * 130000 : Maximum for LV8729 stepper driver
* 15000 : Maximum for TB6560 stepper driver * 15000 : Maximum for TB6560 stepper driver
*
* Override the default value based on the driver type set in Configuration.h.
*/ */
#define MAXIMUM_STEPPER_RATE 250000 //#define MAXIMUM_STEPPER_RATE 250000
// @section temperature // @section temperature
@ -1036,23 +1042,12 @@
// @section tmc // @section tmc
/** /**
* Enable this section if you have TMC26X motor drivers. * TMC26X Stepper Driver options
* You will need to import the TMC26XStepper library into the Arduino IDE for this *
* (https://github.com/trinamic/TMC26XStepper.git) * The TMC26XStepper library is required for this stepper driver.
* https://github.com/trinamic/TMC26XStepper
*/ */
//#define HAVE_TMC26X #if HAS_DRIVER(TMC26X)
#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory!
//#define X_IS_TMC26X
//#define X2_IS_TMC26X
//#define Y_IS_TMC26X
//#define Y2_IS_TMC26X
//#define Z_IS_TMC26X
//#define Z2_IS_TMC26X
//#define E0_IS_TMC26X
//#define E1_IS_TMC26X
//#define E2_IS_TMC26X
//#define E3_IS_TMC26X
//#define E4_IS_TMC26X
#define X_MAX_CURRENT 1000 // in mA #define X_MAX_CURRENT 1000 // in mA
#define X_SENSE_RESISTOR 91 // in mOhms #define X_SENSE_RESISTOR 91 // in mOhms
@ -1098,62 +1093,29 @@
#define E4_SENSE_RESISTOR 91 #define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
#endif #endif // TMC26X
// @section tmc_smart // @section tmc_smart
/** /**
* Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
*
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
* To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins. * You may also use software SPI if you wish to use general purpose IO pins.
*/ *
//#define HAVE_TMC2130 * The TMC2130Stepper library is required for this stepper driver.
#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! * https://github.com/teemuatlut/TMC2130Stepper
//#define X_IS_TMC2130 *
//#define X2_IS_TMC2130 * To use TMC2208 stepper UART-configurable stepper drivers
//#define Y_IS_TMC2130 * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
//#define Y2_IS_TMC2130
//#define Z_IS_TMC2130
//#define Z2_IS_TMC2130
//#define E0_IS_TMC2130
//#define E1_IS_TMC2130
//#define E2_IS_TMC2130
//#define E3_IS_TMC2130
//#define E4_IS_TMC2130
#endif
/**
* Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
* Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
* To use the reading capabilities, also connect #_SERIAL_RX_PIN * To use the reading capabilities, also connect #_SERIAL_RX_PIN
* to PDN_UART without a resistor. * to PDN_UART without a resistor.
* The drivers can also be used with hardware serial. * The drivers can also be used with hardware serial.
* *
* You'll also need the TMC2208Stepper Arduino library * The TMC2208Stepper library is required for this stepper driver.
* (https://github.com/teemuatlut/TMC2208Stepper). * https://github.com/teemuatlut/TMC2208Stepper
*/ */
//#define HAVE_TMC2208 #if HAS_TRINAMIC
#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory!
//#define X_IS_TMC2208
//#define X2_IS_TMC2208
//#define Y_IS_TMC2208
//#define Y2_IS_TMC2208
//#define Z_IS_TMC2208
//#define Z2_IS_TMC2208
//#define E0_IS_TMC2208
//#define E1_IS_TMC2208
//#define E2_IS_TMC2208
//#define E3_IS_TMC2208
//#define E4_IS_TMC2208
#endif
#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
#define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -1308,25 +1270,12 @@
// @section L6470 // @section L6470
/** /**
* Enable this section if you have L6470 motor drivers. * L6470 Stepper Driver options
* You need to import the L6470 library into the Arduino IDE for this. *
* (https://github.com/ameyer/Arduino-L6470) * The Arduino-L6470 library is required for this stepper driver.
* https://github.com/ameyer/Arduino-L6470
*/ */
#if HAS_DRIVER(L6470)
//#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)
//#define X_IS_L6470
//#define X2_IS_L6470
//#define Y_IS_L6470
//#define Y2_IS_L6470
//#define Z_IS_L6470
//#define Z2_IS_L6470
//#define E0_IS_L6470
//#define E1_IS_L6470
//#define E2_IS_L6470
//#define E3_IS_L6470
//#define E4_IS_L6470
#define X_MICROSTEPS 16 // number of microsteps #define X_MICROSTEPS 16 // number of microsteps
#define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@ -1372,7 +1321,7 @@
#define E4_OVERCURRENT 2000 #define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500 #define E4_STALLCURRENT 1500
#endif #endif // L6470
/** /**
* TWI/I2C BUS * TWI/I2C BUS

57
Marlin/src/core/drivers.h Normal file
View file

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define A4988 0x001
#define DRV8825 0x002
#define LV8729 0x003
#define L6470 0x104
#define TB6560 0x005
#define TB6600 0x006
#define TMC2100 0x007
#define TMC2130 0x108
#define TMC2130_STANDALONE 0x008
#define TMC2208 0x109
#define TMC2208_STANDALONE 0x009
#define TMC26X 0x10A
#define TMC26X_STANDALONE 0x00A
#define TMC2660 0x10B
#define TMC2660_STANDALONE 0x00B
#define AXIS_DRIVER_TYPE(A, T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) )
#define HAS_DRIVER(T) (AXIS_DRIVER_TYPE( X,T) || AXIS_DRIVER_TYPE(X2,T) || \
AXIS_DRIVER_TYPE( Y,T) || AXIS_DRIVER_TYPE(Y2,T) || \
AXIS_DRIVER_TYPE( Z,T) || AXIS_DRIVER_TYPE(Z2,T) || \
AXIS_DRIVER_TYPE(E0,T) || \
AXIS_DRIVER_TYPE(E1,T) || \
AXIS_DRIVER_TYPE(E2,T) || \
AXIS_DRIVER_TYPE(E3,T) || \
AXIS_DRIVER_TYPE(E4,T) )
// Test for supported TMC drivers that require advanced configuration
// Does not match standalone configurations
#define HAS_TRINAMIC ( HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2660) )
#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE(A, TMC2130) || \
AXIS_DRIVER_TYPE(A, TMC2208) || \
AXIS_DRIVER_TYPE(A, TMC2660) )

6
Marlin/src/core/macros.h
View file

@ -20,8 +20,8 @@
* *
*/ */
#ifndef MACROS_H #ifndef _CORE_MACROS_H_
#define MACROS_H #define _CORE_MACROS_H_
#define NUM_AXIS 4 #define NUM_AXIS 4
#define ABCE 4 #define ABCE 4
@ -270,4 +270,4 @@
#define FMOD(x, y) fmodf(x, y) #define FMOD(x, y) fmodf(x, y)
#define HYPOT(x,y) SQRT(HYPOT2(x,y)) #define HYPOT(x,y) SQRT(HYPOT2(x,y))
#endif //__MACROS_H #endif // _CORE_MACROS_H_

92
Marlin/src/feature/tmc_util.cpp
View file

@ -52,7 +52,7 @@ bool report_tmc_status = false;
bool is_ot; bool is_ot;
bool is_error; bool is_error;
}; };
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); } static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; } static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; }
static TMC_driver_data get_driver_data(TMC2130Stepper &st) { static TMC_driver_data get_driver_data(TMC2130Stepper &st) {
@ -70,7 +70,7 @@ bool report_tmc_status = false;
return data; return data;
} }
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); } static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
static uint8_t get_status_response(TMC2208Stepper &st) { static uint8_t get_status_response(TMC2208Stepper &st) {
uint32_t drv_status = st.DRV_STATUS(); uint32_t drv_status = st.DRV_STATUS();
@ -159,21 +159,21 @@ bool report_tmc_status = false;
} }
} }
#define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL)) #define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL))
void monitor_tmc_driver() { void monitor_tmc_driver() {
static millis_t next_cOT = 0; static millis_t next_cOT = 0;
if (ELAPSED(millis(), next_cOT)) { if (ELAPSED(millis(), next_cOT)) {
next_cOT = millis() + 500; next_cOT = millis() + 500;
#if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS) #if HAS_HW_COMMS(X)
static uint8_t x_otpw_cnt = 0; static uint8_t x_otpw_cnt = 0;
monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt); monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt);
#endif #endif
#if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS) #if HAS_HW_COMMS(Y)
static uint8_t y_otpw_cnt = 0; static uint8_t y_otpw_cnt = 0;
monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt); monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt);
#endif #endif
#if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS) #if HAS_HW_COMMS(Z)
static uint8_t z_otpw_cnt = 0; static uint8_t z_otpw_cnt = 0;
monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt); monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt);
#endif #endif
@ -189,7 +189,7 @@ bool report_tmc_status = false;
static uint8_t z2_otpw_cnt = 0; static uint8_t z2_otpw_cnt = 0;
monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt); monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt);
#endif #endif
#if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS) #if HAS_HW_COMMS(E0)
static uint8_t e0_otpw_cnt = 0; static uint8_t e0_otpw_cnt = 0;
monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt); monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt);
#endif #endif
@ -311,7 +311,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
SERIAL_EOL(); SERIAL_EOL();
} }
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) { static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) {
switch (i) { switch (i) {
case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break; case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break;
@ -331,7 +331,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
} }
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) { static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) {
switch (i) { switch (i) {
case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; } case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; }
@ -420,52 +420,52 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
} }
static void tmc_debug_loop(const TMC_debug_enum i) { static void tmc_debug_loop(const TMC_debug_enum i) {
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]); tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]); tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]); tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]); tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]); tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]); tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]); tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]);
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
+ 1 + 1
#endif #endif
]); ]);
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
+ 2 + 2
#endif #endif
]); ]);
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
+ 3 + 3
#endif #endif
]); ]);
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
+ 4 + 4
@ -477,40 +477,40 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
} }
static void drv_status_loop(const TMC_drv_status_enum i) { static void drv_status_loop(const TMC_drv_status_enum i) {
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
tmc_parse_drv_status(stepperX, TMC_X, i); tmc_parse_drv_status(stepperX, TMC_X, i);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
tmc_parse_drv_status(stepperX2, TMC_X2, i); tmc_parse_drv_status(stepperX2, TMC_X2, i);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
tmc_parse_drv_status(stepperY, TMC_Y, i); tmc_parse_drv_status(stepperY, TMC_Y, i);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
tmc_parse_drv_status(stepperY2, TMC_Y2, i); tmc_parse_drv_status(stepperY2, TMC_Y2, i);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
tmc_parse_drv_status(stepperZ, TMC_Z, i); tmc_parse_drv_status(stepperZ, TMC_Z, i);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
tmc_parse_drv_status(stepperZ2, TMC_Z2, i); tmc_parse_drv_status(stepperZ2, TMC_Z2, i);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
tmc_parse_drv_status(stepperE0, TMC_E0, i); tmc_parse_drv_status(stepperE0, TMC_E0, i);
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
tmc_parse_drv_status(stepperE1, TMC_E1, i); tmc_parse_drv_status(stepperE1, TMC_E1, i);
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
tmc_parse_drv_status(stepperE2, TMC_E2, i); tmc_parse_drv_status(stepperE2, TMC_E2, i);
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
tmc_parse_drv_status(stepperE3, TMC_E3, i); tmc_parse_drv_status(stepperE3, TMC_E3, i);
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
tmc_parse_drv_status(stepperE4, TMC_E4, i); tmc_parse_drv_status(stepperE4, TMC_E4, i);
#endif #endif
@ -553,7 +553,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
TMC_REPORT("Stallguard thrs", TMC_SGT); TMC_REPORT("Stallguard thrs", TMC_SGT);
DRV_REPORT("DRVSTATUS", TMC_DRV_CODES); DRV_REPORT("DRVSTATUS", TMC_DRV_CODES);
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
DRV_REPORT("stallguard\t", TMC_STALLGUARD); DRV_REPORT("stallguard\t", TMC_STALLGUARD);
DRV_REPORT("sg_result\t", TMC_SG_RESULT); DRV_REPORT("sg_result\t", TMC_SG_RESULT);
DRV_REPORT("fsactive\t", TMC_FSACTIVE); DRV_REPORT("fsactive\t", TMC_FSACTIVE);
@ -565,7 +565,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
DRV_REPORT("s2ga\t", TMC_S2GA); DRV_REPORT("s2ga\t", TMC_S2GA);
DRV_REPORT("otpw\t", TMC_DRV_OTPW); DRV_REPORT("otpw\t", TMC_DRV_OTPW);
DRV_REPORT("ot\t", TMC_OT); DRV_REPORT("ot\t", TMC_OT);
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
DRV_REPORT("157C\t", TMC_T157); DRV_REPORT("157C\t", TMC_T157);
DRV_REPORT("150C\t", TMC_T150); DRV_REPORT("150C\t", TMC_T150);
DRV_REPORT("143C\t", TMC_T143); DRV_REPORT("143C\t", TMC_T143);
@ -591,43 +591,43 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
#endif // SENSORLESS_HOMING #endif // SENSORLESS_HOMING
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
#define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH) #define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH)
void tmc_init_cs_pins() { void tmc_init_cs_pins() {
#if ENABLED(X_IS_TMC2130) #if AXIS_DRIVER_TYPE(X, TMC2130)
SET_CS_PIN(X); SET_CS_PIN(X);
#endif #endif
#if ENABLED(Y_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y, TMC2130)
SET_CS_PIN(Y); SET_CS_PIN(Y);
#endif #endif
#if ENABLED(Z_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z, TMC2130)
SET_CS_PIN(Z); SET_CS_PIN(Z);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_DRIVER_TYPE(X2, TMC2130)
SET_CS_PIN(X2); SET_CS_PIN(X2);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y2, TMC2130)
SET_CS_PIN(Y2); SET_CS_PIN(Y2);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z2, TMC2130)
SET_CS_PIN(Z2); SET_CS_PIN(Z2);
#endif #endif
#if ENABLED(E0_IS_TMC2130) #if AXIS_DRIVER_TYPE(E0, TMC2130)
SET_CS_PIN(E0); SET_CS_PIN(E0);
#endif #endif
#if ENABLED(E1_IS_TMC2130) #if AXIS_DRIVER_TYPE(E1, TMC2130)
SET_CS_PIN(E1); SET_CS_PIN(E1);
#endif #endif
#if ENABLED(E2_IS_TMC2130) #if AXIS_DRIVER_TYPE(E2, TMC2130)
SET_CS_PIN(E2); SET_CS_PIN(E2);
#endif #endif
#if ENABLED(E3_IS_TMC2130) #if AXIS_DRIVER_TYPE(E3, TMC2130)
SET_CS_PIN(E3); SET_CS_PIN(E3);
#endif #endif
#if ENABLED(E4_IS_TMC2130) #if AXIS_DRIVER_TYPE(E4, TMC2130)
SET_CS_PIN(E4); SET_CS_PIN(E4);
#endif #endif
} }
#endif // HAVE_TMC2130 #endif // TMC2130
#endif // HAS_TRINAMIC #endif // HAS_TRINAMIC

6
Marlin/src/feature/tmc_util.h
View file

@ -25,11 +25,11 @@
#include "../inc/MarlinConfigPre.h" #include "../inc/MarlinConfigPre.h"
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
#include <TMC2130Stepper.h> #include <TMC2130Stepper.h>
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
#include <TMC2208Stepper.h> #include <TMC2208Stepper.h>
#endif #endif
@ -100,7 +100,7 @@ void monitor_tmc_driver();
void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable=true); void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable=true);
#endif #endif
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
void tmc_init_cs_pins(); void tmc_init_cs_pins();
#endif #endif

44
Marlin/src/gcode/feature/trinamic/M906.cpp
View file

@ -42,45 +42,45 @@ void GcodeSuite::M906() {
report = false; report = false;
switch (i) { switch (i) {
case X_AXIS: case X_AXIS:
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
if (index == 0) TMC_SET_CURRENT(X); if (index == 0) TMC_SET_CURRENT(X);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
if (index == 1) TMC_SET_CURRENT(X2); if (index == 1) TMC_SET_CURRENT(X2);
#endif #endif
break; break;
case Y_AXIS: case Y_AXIS:
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
if (index == 0) TMC_SET_CURRENT(Y); if (index == 0) TMC_SET_CURRENT(Y);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
if (index == 1) TMC_SET_CURRENT(Y2); if (index == 1) TMC_SET_CURRENT(Y2);
#endif #endif
break; break;
case Z_AXIS: case Z_AXIS:
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
if (index == 0) TMC_SET_CURRENT(Z); if (index == 0) TMC_SET_CURRENT(Z);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
if (index == 1) TMC_SET_CURRENT(Z2); if (index == 1) TMC_SET_CURRENT(Z2);
#endif #endif
break; break;
case E_AXIS: { case E_AXIS: {
if (get_target_extruder_from_command()) return; if (get_target_extruder_from_command()) return;
switch (target_extruder) { switch (target_extruder) {
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
case 0: TMC_SET_CURRENT(E0); break; case 0: TMC_SET_CURRENT(E0); break;
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
case 1: TMC_SET_CURRENT(E1); break; case 1: TMC_SET_CURRENT(E1); break;
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
case 2: TMC_SET_CURRENT(E2); break; case 2: TMC_SET_CURRENT(E2); break;
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
case 3: TMC_SET_CURRENT(E3); break; case 3: TMC_SET_CURRENT(E3); break;
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
case 4: TMC_SET_CURRENT(E4); break; case 4: TMC_SET_CURRENT(E4); break;
#endif #endif
} }
@ -89,37 +89,37 @@ void GcodeSuite::M906() {
} }
if (report) { if (report) {
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
TMC_SAY_CURRENT(X); TMC_SAY_CURRENT(X);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
TMC_SAY_CURRENT(X2); TMC_SAY_CURRENT(X2);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
TMC_SAY_CURRENT(Y); TMC_SAY_CURRENT(Y);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
TMC_SAY_CURRENT(Y2); TMC_SAY_CURRENT(Y2);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
TMC_SAY_CURRENT(Z); TMC_SAY_CURRENT(Z);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
TMC_SAY_CURRENT(Z2); TMC_SAY_CURRENT(Z2);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
TMC_SAY_CURRENT(E0); TMC_SAY_CURRENT(E0);
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
TMC_SAY_CURRENT(E1); TMC_SAY_CURRENT(E1);
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
TMC_SAY_CURRENT(E2); TMC_SAY_CURRENT(E2);
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
TMC_SAY_CURRENT(E3); TMC_SAY_CURRENT(E3);
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
TMC_SAY_CURRENT(E4); TMC_SAY_CURRENT(E4);
#endif #endif
} }

106
Marlin/src/gcode/feature/trinamic/M911-M915.cpp
View file

@ -30,37 +30,33 @@
#include "../../../module/planner.h" #include "../../../module/planner.h"
#include "../../queue.h" #include "../../queue.h"
#define M91x_USE(A) (ENABLED(A##_IS_TMC2130) || (ENABLED(A##_IS_TMC2208) && PIN_EXISTS(A##_SERIAL_RX))) #define M91x_USE(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && PIN_EXISTS(ST##_SERIAL_RX)))
#define M91x_USE_E(N) (E_STEPPERS > N && M91x_USE(E##N)) #define M91x_USE_E(N) (E_STEPPERS > N && M91x_USE(E##N))
#define M91x_USE_X (ENABLED(IS_TRAMS) || M91x_USE(X))
#define M91x_USE_Y (ENABLED(IS_TRAMS) || M91x_USE(Y))
#define M91x_USE_Z (ENABLED(IS_TRAMS) || M91x_USE(Z))
#define M91x_USE_E0 (ENABLED(IS_TRAMS) || M91x_USE_E(0))
/** /**
* M911: Report TMC stepper driver overtemperature pre-warn flag * M911: Report TMC stepper driver overtemperature pre-warn flag
* This flag is held by the library, persisting until cleared by M912 * This flag is held by the library, persisting until cleared by M912
*/ */
void GcodeSuite::M911() { void GcodeSuite::M911() {
#if M91x_USE_X #if M91x_USE(X)
tmc_report_otpw(stepperX, TMC_X); tmc_report_otpw(stepperX, TMC_X);
#endif #endif
#if M91x_USE(X2) #if M91x_USE(X2)
tmc_report_otpw(stepperX2, TMC_X2); tmc_report_otpw(stepperX2, TMC_X2);
#endif #endif
#if M91x_USE_Y #if M91x_USE(Y)
tmc_report_otpw(stepperY, TMC_Y); tmc_report_otpw(stepperY, TMC_Y);
#endif #endif
#if M91x_USE(Y2) #if M91x_USE(Y2)
tmc_report_otpw(stepperY2, TMC_Y2); tmc_report_otpw(stepperY2, TMC_Y2);
#endif #endif
#if M91x_USE_Z #if M91x_USE(Z)
tmc_report_otpw(stepperZ, TMC_Z); tmc_report_otpw(stepperZ, TMC_Z);
#endif #endif
#if M91x_USE(Z2) #if M91x_USE(Z2)
tmc_report_otpw(stepperZ2, TMC_Z2); tmc_report_otpw(stepperZ2, TMC_Z2);
#endif #endif
#if M91x_USE_E0 #if M91x_USE_E(0)
tmc_report_otpw(stepperE0, TMC_E0); tmc_report_otpw(stepperE0, TMC_E0);
#endif #endif
#if M91x_USE_E(1) #if M91x_USE_E(1)
@ -96,9 +92,9 @@ void GcodeSuite::M912() {
hasE = parser.seen(axis_codes[E_AXIS]), hasE = parser.seen(axis_codes[E_AXIS]),
hasNone = !hasX && !hasY && !hasZ && !hasE; hasNone = !hasX && !hasY && !hasZ && !hasE;
#if M91x_USE_X || M91x_USE(X2) #if M91x_USE(X) || M91x_USE(X2)
const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10); const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10);
#if M91x_USE_X #if M91x_USE(X)
if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X); if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X);
#endif #endif
#if M91x_USE(X2) #if M91x_USE(X2)
@ -106,9 +102,9 @@ void GcodeSuite::M912() {
#endif #endif
#endif #endif
#if M91x_USE_Y || M91x_USE(Y2) #if M91x_USE(Y) || M91x_USE(Y2)
const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10); const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10);
#if M91x_USE_Y #if M91x_USE(Y)
if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y); if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y);
#endif #endif
#if M91x_USE(Y2) #if M91x_USE(Y2)
@ -116,9 +112,9 @@ void GcodeSuite::M912() {
#endif #endif
#endif #endif
#if M91x_USE_Z || M91x_USE(Z2) #if M91x_USE(Z) || M91x_USE(Z2)
const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10); const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10);
#if M91x_USE_Z #if M91x_USE(Z)
if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z); if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z);
#endif #endif
#if M91x_USE(Z2) #if M91x_USE(Z2)
@ -126,9 +122,9 @@ void GcodeSuite::M912() {
#endif #endif
#endif #endif
#if M91x_USE_E0 || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) #if M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4)
const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10); const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10);
#if M91x_USE_E0 #if M91x_USE_E(0)
if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0); if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0);
#endif #endif
#if M91x_USE_E(1) #if M91x_USE_E(1)
@ -162,45 +158,45 @@ void GcodeSuite::M912() {
report = false; report = false;
switch (i) { switch (i) {
case X_AXIS: case X_AXIS:
#if X_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X)
if (index < 2) TMC_SET_PWMTHRS(X,X); if (index < 2) TMC_SET_PWMTHRS(X,X);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X2)
if (!(index & 1)) TMC_SET_PWMTHRS(X,X2); if (!(index & 1)) TMC_SET_PWMTHRS(X,X2);
#endif #endif
break; break;
case Y_AXIS: case Y_AXIS:
#if Y_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y)
if (index < 2) TMC_SET_PWMTHRS(Y,Y); if (index < 2) TMC_SET_PWMTHRS(Y,Y);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y2)
if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2); if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2);
#endif #endif
break; break;
case Z_AXIS: case Z_AXIS:
#if Z_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z)
if (index < 2) TMC_SET_PWMTHRS(Z,Z); if (index < 2) TMC_SET_PWMTHRS(Z,Z);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z2)
if (!(index & 1)) TMC_SET_PWMTHRS(Z,Z2); if (!(index & 1)) TMC_SET_PWMTHRS(Z,Z2);
#endif #endif
break; break;
case E_AXIS: { case E_AXIS: {
if (get_target_extruder_from_command()) return; if (get_target_extruder_from_command()) return;
switch (target_extruder) { switch (target_extruder) {
#if E0_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E0)
case 0: TMC_SET_PWMTHRS_E(0); break; case 0: TMC_SET_PWMTHRS_E(0); break;
#endif #endif
#if E_STEPPERS > 1 && E1_IS_TRINAMIC #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
case 1: TMC_SET_PWMTHRS_E(1); break; case 1: TMC_SET_PWMTHRS_E(1); break;
#endif #endif
#if E_STEPPERS > 2 && E2_IS_TRINAMIC #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
case 2: TMC_SET_PWMTHRS_E(2); break; case 2: TMC_SET_PWMTHRS_E(2); break;
#endif #endif
#if E_STEPPERS > 3 && E3_IS_TRINAMIC #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
case 3: TMC_SET_PWMTHRS_E(3); break; case 3: TMC_SET_PWMTHRS_E(3); break;
#endif #endif
#if E_STEPPERS > 4 && E4_IS_TRINAMIC #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
case 4: TMC_SET_PWMTHRS_E(4); break; case 4: TMC_SET_PWMTHRS_E(4); break;
#endif #endif
} }
@ -209,37 +205,37 @@ void GcodeSuite::M912() {
} }
if (report) { if (report) {
#if X_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X)
TMC_SAY_PWMTHRS(X,X); TMC_SAY_PWMTHRS(X,X);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X2)
TMC_SAY_PWMTHRS(X,X2); TMC_SAY_PWMTHRS(X,X2);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y)
TMC_SAY_PWMTHRS(Y,Y); TMC_SAY_PWMTHRS(Y,Y);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y2)
TMC_SAY_PWMTHRS(Y,Y2); TMC_SAY_PWMTHRS(Y,Y2);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z)
TMC_SAY_PWMTHRS(Z,Z); TMC_SAY_PWMTHRS(Z,Z);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z2)
TMC_SAY_PWMTHRS(Z,Z2); TMC_SAY_PWMTHRS(Z,Z2);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E0)
TMC_SAY_PWMTHRS_E(0); TMC_SAY_PWMTHRS_E(0);
#endif #endif
#if E_STEPPERS > 1 && E1_IS_TRINAMIC #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
TMC_SAY_PWMTHRS_E(1); TMC_SAY_PWMTHRS_E(1);
#endif #endif
#if E_STEPPERS > 2 && E2_IS_TRINAMIC #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
TMC_SAY_PWMTHRS_E(2); TMC_SAY_PWMTHRS_E(2);
#endif #endif
#if E_STEPPERS > 3 && E3_IS_TRINAMIC #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
TMC_SAY_PWMTHRS_E(3); TMC_SAY_PWMTHRS_E(3);
#endif #endif
#if E_STEPPERS > 4 && E4_IS_TRINAMIC #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
TMC_SAY_PWMTHRS_E(4); TMC_SAY_PWMTHRS_E(4);
#endif #endif
} }
@ -262,30 +258,30 @@ void GcodeSuite::M912() {
switch (i) { switch (i) {
#if X_SENSORLESS #if X_SENSORLESS
case X_AXIS: case X_AXIS:
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(X)
if (index < 2) TMC_SET_SGT(X); if (index < 2) TMC_SET_SGT(X);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(X2)
if (!(index & 1)) TMC_SET_SGT(X2); if (!(index & 1)) TMC_SET_SGT(X2);
#endif #endif
break; break;
#endif #endif
#if Y_SENSORLESS #if Y_SENSORLESS
case Y_AXIS: case Y_AXIS:
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Y)
if (index < 2) TMC_SET_SGT(Y); if (index < 2) TMC_SET_SGT(Y);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Y2)
if (!(index & 1)) TMC_SET_SGT(Y2); if (!(index & 1)) TMC_SET_SGT(Y2);
#endif #endif
break; break;
#endif #endif
#if Z_SENSORLESS #if Z_SENSORLESS
case Z_AXIS: case Z_AXIS:
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Z)
if (index < 2) TMC_SET_SGT(Z); if (index < 2) TMC_SET_SGT(Z);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Z2)
if (!(index & 1)) TMC_SET_SGT(Z2); if (!(index & 1)) TMC_SET_SGT(Z2);
#endif #endif
break; break;
@ -295,26 +291,26 @@ void GcodeSuite::M912() {
if (report) { if (report) {
#if X_SENSORLESS #if X_SENSORLESS
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(X)
TMC_SAY_SGT(X); TMC_SAY_SGT(X);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(X2)
TMC_SAY_SGT(X2); TMC_SAY_SGT(X2);
#endif #endif
#endif #endif
#if Y_SENSORLESS #if Y_SENSORLESS
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Y)
TMC_SAY_SGT(Y); TMC_SAY_SGT(Y);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Y2)
TMC_SAY_SGT(Y2); TMC_SAY_SGT(Y2);
#endif #endif
#endif #endif
#if Z_SENSORLESS #if Z_SENSORLESS
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Z)
TMC_SAY_SGT(Z); TMC_SAY_SGT(Z);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Z2)
TMC_SAY_SGT(Z2); TMC_SAY_SGT(Z2);
#endif #endif
#endif #endif
@ -335,11 +331,11 @@ void GcodeSuite::M912() {
return; return;
} }
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
const uint16_t Z_current_1 = stepperZ.getCurrent(); const uint16_t Z_current_1 = stepperZ.getCurrent();
stepperZ.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); stepperZ.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
const uint16_t Z2_current_1 = stepperZ2.getCurrent(); const uint16_t Z2_current_1 = stepperZ2.getCurrent();
stepperZ2.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); stepperZ2.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER);
#endif #endif
@ -350,10 +346,10 @@ void GcodeSuite::M912() {
do_blocking_move_to_z(Z_MAX_POS+_z); do_blocking_move_to_z(Z_MAX_POS+_z);
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
stepperZ.setCurrent(Z_current_1, R_SENSE, HOLD_MULTIPLIER); stepperZ.setCurrent(Z_current_1, R_SENSE, HOLD_MULTIPLIER);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
stepperZ2.setCurrent(Z2_current_1, R_SENSE, HOLD_MULTIPLIER); stepperZ2.setCurrent(Z2_current_1, R_SENSE, HOLD_MULTIPLIER);
#endif #endif

8
Marlin/src/gcode/gcode.h
View file

@ -132,7 +132,7 @@
* M119 - Report endstops status. * M119 - Report endstops status.
* M120 - Enable endstops detection. * M120 - Enable endstops detection.
* M121 - Disable endstops detection. * M121 - Disable endstops detection.
* M122 - Debug stepper (Requires HAVE_TMC2130 or HAVE_TMC2208) * M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
* M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE) * M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE)
* M126 - Solenoid Air Valve Open. (Requires BARICUDA) * M126 - Solenoid Air Valve Open. (Requires BARICUDA)
* M127 - Solenoid Air Valve Closed. (Requires BARICUDA) * M127 - Solenoid Air Valve Closed. (Requires BARICUDA)
@ -219,13 +219,13 @@
* M868 - Report or set position encoder module error correction threshold. * M868 - Report or set position encoder module error correction threshold.
* M869 - Report position encoder module error. * M869 - Report position encoder module error.
* M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE) * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
* M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires HAVE_TMC2130 or HAVE_TMC2208) * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
* M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots) * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN) * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
* M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT) * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT)
* M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT) * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT)
* M911 - Report stepper driver overtemperature pre-warn condition. (Requires HAVE_TMC2130 or HAVE_TMC2208) * M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
* M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires HAVE_TMC2130 or HAVE_TMC2208) * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660)
* M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD) * M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
* M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING) * M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING)
* *

79
Marlin/src/inc/Conditionals_post.h
View file

@ -426,6 +426,63 @@
#define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__) #define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__)
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1) #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
/**
* Driver Timings
* NOTE: Driver timing order is longest-to-shortest duration.
* Preserve this ordering when adding new drivers.
*/
#ifndef MINIMUM_STEPPER_DIR_DELAY
#if HAS_DRIVER(TB6560)
#define MINIMUM_STEPPER_DIR_DELAY 15000
#elif HAS_DRIVER(TB6600)
#define MINIMUM_STEPPER_DIR_DELAY 1500
#elif HAS_DRIVER(DRV8825)
#define MINIMUM_STEPPER_DIR_DELAY 650
#elif HAS_DRIVER(LV8729)
#define MINIMUM_STEPPER_DIR_DELAY 500
#elif HAS_DRIVER(A4988)
#define MINIMUM_STEPPER_DIR_DELAY 200
#elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
#define MINIMUM_STEPPER_DIR_DELAY 20
#else
#define MINIMUM_STEPPER_DIR_DELAY 0 // Expect at least 10µS since one Stepper ISR must transpire
#endif
#endif
#ifndef MINIMUM_STEPPER_PULSE
#if HAS_DRIVER(TB6560)
#define MINIMUM_STEPPER_PULSE 30
#elif HAS_DRIVER(TB6600)
#define MINIMUM_STEPPER_PULSE 3
#elif HAS_DRIVER(DRV8825)
#define MINIMUM_STEPPER_PULSE 2
#elif HAS_DRIVER(A4988) || HAS_DRIVER(LV8729)
#define MINIMUM_STEPPER_PULSE 1
#elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
#define MINIMUM_STEPPER_PULSE 0
#else
#define MINIMUM_STEPPER_PULSE 2
#endif
#endif
#ifndef MAXIMUM_STEPPER_RATE
#if HAS_DRIVER(TB6560)
#define MAXIMUM_STEPPER_RATE 15000
#elif HAS_DRIVER(LV8729)
#define MAXIMUM_STEPPER_RATE 130000
#elif HAS_DRIVER(TB6600)
#define MAXIMUM_STEPPER_RATE 150000
#elif HAS_DRIVER(DRV8825)
#define MAXIMUM_STEPPER_RATE 250000
#elif HAS_TRINAMIC || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)
#define MAXIMUM_STEPPER_RATE 400000
#elif HAS_DRIVER(A4988)
#define MAXIMUM_STEPPER_RATE 500000
#else
#define MAXIMUM_STEPPER_RATE 250000
#endif
#endif
/** /**
* X_DUAL_ENDSTOPS endstop reassignment * X_DUAL_ENDSTOPS endstop reassignment
*/ */
@ -711,27 +768,19 @@
#define HAS_SOLENOID_4 (PIN_EXISTS(SOL4)) #define HAS_SOLENOID_4 (PIN_EXISTS(SOL4))
// Trinamic Stepper Drivers // Trinamic Stepper Drivers
#define HAS_TRINAMIC (ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) || ENABLED(IS_TRAMS)) #define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
#define X_IS_TRINAMIC (ENABLED( X_IS_TMC2130) || ENABLED( X_IS_TMC2208) || ENABLED(IS_TRAMS)) #define HAS_STALLGUARD (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2660))
#define X2_IS_TRINAMIC (ENABLED(X2_IS_TMC2130) || ENABLED(X2_IS_TMC2208)) #define AXIS_HAS_STEALTHCHOP(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208) )
#define Y_IS_TRINAMIC (ENABLED( Y_IS_TMC2130) || ENABLED( Y_IS_TMC2208) || ENABLED(IS_TRAMS)) #define AXIS_HAS_STALLGUARD(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2660) )
#define Y2_IS_TRINAMIC (ENABLED(Y2_IS_TMC2130) || ENABLED(Y2_IS_TMC2208))
#define Z_IS_TRINAMIC (ENABLED( Z_IS_TMC2130) || ENABLED( Z_IS_TMC2208) || ENABLED(IS_TRAMS))
#define Z2_IS_TRINAMIC (ENABLED(Z2_IS_TMC2130) || ENABLED(Z2_IS_TMC2208))
#define E0_IS_TRINAMIC (ENABLED(E0_IS_TMC2130) || ENABLED(E0_IS_TMC2208) || ENABLED(IS_TRAMS))
#define E1_IS_TRINAMIC (ENABLED(E1_IS_TMC2130) || ENABLED(E1_IS_TMC2208))
#define E2_IS_TRINAMIC (ENABLED(E2_IS_TMC2130) || ENABLED(E2_IS_TMC2208))
#define E3_IS_TRINAMIC (ENABLED(E3_IS_TMC2130) || ENABLED(E3_IS_TMC2208))
#define E4_IS_TRINAMIC (ENABLED(E4_IS_TMC2130) || ENABLED(E4_IS_TMC2208))
#if ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)
// Disable Z axis sensorless homing if a probe is used to home the Z axis // Disable Z axis sensorless homing if a probe is used to home the Z axis
#if HOMING_Z_WITH_PROBE #if HOMING_Z_WITH_PROBE
#undef Z_HOMING_SENSITIVITY #undef Z_HOMING_SENSITIVITY
#endif #endif
#define X_SENSORLESS (ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY)) #define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_HOMING_SENSITIVITY))
#define Y_SENSORLESS (ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY)) #define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_HOMING_SENSITIVITY))
#define Z_SENSORLESS (ENABLED(Z_IS_TMC2130) && defined(Z_HOMING_SENSITIVITY)) #define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_HOMING_SENSITIVITY))
#endif #endif
// Endstops and bed probe // Endstops and bed probe

1
Marlin/src/inc/MarlinConfigPre.h
View file

@ -29,6 +29,7 @@
#include "../core/types.h" #include "../core/types.h"
#include "Version.h" #include "Version.h"
#include "../../Configuration.h" #include "../../Configuration.h"
#include "../core/drivers.h"
#include "Conditionals_LCD.h" #include "Conditionals_LCD.h"
#include "../../Configuration_adv.h" #include "../../Configuration_adv.h"
#include "Conditionals_adv.h" #include "Conditionals_adv.h"

313
Marlin/src/inc/SanityCheck.h
View file

@ -265,10 +265,28 @@
#elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT) #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT)
#error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration." #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration."
#elif defined(HAVE_TMCDRIVER) #elif defined(HAVE_TMCDRIVER)
#error "HAVE_TMCDRIVER is now HAVE_TMC26X. Please update your Configuration_adv.h." #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(HAVE_TMC26X)
#error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(HAVE_TMC2130)
#error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
#elif defined(HAVE_L6470DRIVER)
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) \ #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) \
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC)
#error "[AXIS]_IS_TMC is now [AXIS]_IS_TMC26X. Please update your Configuration_adv.h." #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) \
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X)
#error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) \
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130)
#error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) \
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208)
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) \
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470)
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
#elif defined(AUTOMATIC_CURRENT_CONTROL) #elif defined(AUTOMATIC_CURRENT_CONTROL)
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
#elif defined(FILAMENT_CHANGE_LOAD_LENGTH) #elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
@ -974,15 +992,11 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
*/ */
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#if HAS_BED_PROBE #if HAS_BED_PROBE
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X), static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
"Z_SAFE_HOMING_X_POINT is outside the probe region."); static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y),
"Z_SAFE_HOMING_Y_POINT is outside the probe region.");
#else #else
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
"Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."); static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS),
"Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
#endif #endif
#endif // Z_SAFE_HOMING #endif // Z_SAFE_HOMING
@ -1458,128 +1472,36 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#endif #endif
/** /**
* Make sure HAVE_TMC26X is warranted * Check existing CS pins against enabled TMC SPI drivers.
*/ */
#if ENABLED(HAVE_TMC26X) && !( \ #if AXIS_DRIVER_TYPE(X, TMC2130) && !PIN_EXISTS(X_CS)
ENABLED( X_IS_TMC26X ) \ #error "X_CS_PIN is required for TMC2130. Define X_CS_PIN in Configuration_adv.h."
|| ENABLED( X2_IS_TMC26X ) \ #elif AXIS_DRIVER_TYPE(X2, TMC2130) && !PIN_EXISTS(X2_CS)
|| ENABLED( Y_IS_TMC26X ) \ #error "X2_CS_PIN is required for X2. Define X2_CS_PIN in Configuration_adv.h."
|| ENABLED( Y2_IS_TMC26X ) \ #elif AXIS_DRIVER_TYPE(Y, TMC2130) && !PIN_EXISTS(Y_CS)
|| ENABLED( Z_IS_TMC26X ) \ #error "Y_CS_PIN is required for TMC2130. Define Y_CS_PIN in Configuration_adv.h."
|| ENABLED( Z2_IS_TMC26X ) \ #elif AXIS_DRIVER_TYPE(Y2, TMC2130) && !PIN_EXISTS(Y2_CS)
|| ENABLED( E0_IS_TMC26X ) \ #error "Y2_CS_PIN is required for TMC2130. Define Y2_CS_PIN in Configuration_adv.h."
|| ENABLED( E1_IS_TMC26X ) \ #elif AXIS_DRIVER_TYPE(Z, TMC2130) && !PIN_EXISTS(Z_CS)
|| ENABLED( E2_IS_TMC26X ) \ #error "Z_CS_PIN is required for TMC2130. Define Z_CS_PIN in Configuration_adv.h."
|| ENABLED( E3_IS_TMC26X ) \ #elif AXIS_DRIVER_TYPE(Z2, TMC2130) && !PIN_EXISTS(Z2_CS)
|| ENABLED( E4_IS_TMC26X ) \ #error "Z2_CS_PIN is required for TMC2130. Define Z2_CS_PIN in Configuration_adv.h."
) #elif AXIS_DRIVER_TYPE(E0, TMC2130) && !PIN_EXISTS(E0_CS)
#error "HAVE_TMC26X requires at least one TMC26X stepper to be set." #error "E0_CS_PIN is required for TMC2130. Define E0_CS_PIN in Configuration_adv.h."
#endif #elif AXIS_DRIVER_TYPE(E1, TMC2130) && !PIN_EXISTS(E1_CS)
#error "E1_CS_PIN is required for TMC2130. Define E1_CS_PIN in Configuration_adv.h."
/** #elif AXIS_DRIVER_TYPE(E2, TMC2130) && !PIN_EXISTS(E2_CS)
* Make sure HAVE_TMC2130 is warranted #error "E2_CS_PIN is required for TMC2130. Define E2_CS_PIN in Configuration_adv.h."
*/ #elif AXIS_DRIVER_TYPE(E3, TMC2130) && !PIN_EXISTS(E3_CS)
#if ENABLED(HAVE_TMC2130) #error "E3_CS_PIN is required for TMC2130. Define E3_CS_PIN in Configuration_adv.h."
#if !( ENABLED( X_IS_TMC2130 ) \ #elif AXIS_DRIVER_TYPE(E4, TMC2130) && !PIN_EXISTS(E4_CS)
|| ENABLED( X2_IS_TMC2130 ) \ #error "E4_CS_PIN is required for TMC2130. Define E4_CS_PIN in Configuration_adv.h."
|| ENABLED( Y_IS_TMC2130 ) \
|| ENABLED( Y2_IS_TMC2130 ) \
|| ENABLED( Z_IS_TMC2130 ) \
|| ENABLED( Z2_IS_TMC2130 ) \
|| ENABLED( E0_IS_TMC2130 ) \
|| ENABLED( E1_IS_TMC2130 ) \
|| ENABLED( E2_IS_TMC2130 ) \
|| ENABLED( E3_IS_TMC2130 ) \
|| ENABLED( E4_IS_TMC2130 ) )
#error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set."
#elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
#error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
#endif
#if ENABLED(X_IS_TMC2130) && !PIN_EXISTS(X_CS)
#error "X_CS_PIN is required for X_IS_TMC2130. Define X_CS_PIN in Configuration_adv.h."
#elif ENABLED(X2_IS_TMC2130) && !PIN_EXISTS(X2_CS)
#error "X2_CS_PIN is required for X2_IS_TMC2130. Define X2_CS_PIN in Configuration_adv.h."
#elif ENABLED(Y_IS_TMC2130) && !PIN_EXISTS(Y_CS)
#error "Y_CS_PIN is required for Y_IS_TMC2130. Define Y_CS_PIN in Configuration_adv.h."
#elif ENABLED(Y2_IS_TMC2130) && !PIN_EXISTS(Y2_CS)
#error "Y2_CS_PIN is required for Y2_IS_TMC2130. Define Y2_CS_PIN in Configuration_adv.h."
#elif ENABLED(Z_IS_TMC2130) && !PIN_EXISTS(Z_CS)
#error "Z_CS_PIN is required for Z_IS_TMC2130. Define Z_CS_PIN in Configuration_adv.h."
#elif ENABLED(Z2_IS_TMC2130) && !PIN_EXISTS(Z2_CS)
#error "Z2_CS_PIN is required for Z2_IS_TMC2130. Define Z2_CS_PIN in Configuration_adv.h."
#elif ENABLED(E0_IS_TMC2130) && !PIN_EXISTS(E0_CS)
#error "E0_CS_PIN is required for E0_IS_TMC2130. Define E0_CS_PIN in Configuration_adv.h."
#elif ENABLED(E1_IS_TMC2130) && !PIN_EXISTS(E1_CS)
#error "E1_CS_PIN is required for E1_IS_TMC2130. Define E1_CS_PIN in Configuration_adv.h."
#elif ENABLED(E2_IS_TMC2130) && !PIN_EXISTS(E2_CS)
#error "E2_CS_PIN is required for E2_IS_TMC2130. Define E2_CS_PIN in Configuration_adv.h."
#elif ENABLED(E3_IS_TMC2130) && !PIN_EXISTS(E3_CS)
#error "E3_CS_PIN is required for E3_IS_TMC2130. Define E3_CS_PIN in Configuration_adv.h."
#elif ENABLED(E4_IS_TMC2130) && !PIN_EXISTS(E4_CS)
#error "E4_CS_PIN is required for E4_IS_TMC2130. Define E4_CS_PIN in Configuration_adv.h."
#endif
#if ENABLED(SENSORLESS_HOMING)
// Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
// is necessary in order to reset the stallGuard indication between the initial movement of all three
// towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
// clearing the stallGuard activated status is found.
#if ENABLED(DELTA) && !ENABLED(STEALTHCHOP)
#error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP."
#elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN))
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
#elif X_SENSORLESS && X_HOME_DIR == 1 && (DISABLED(X_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMAX))
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX."
#elif Y_SENSORLESS && Y_HOME_DIR == -1 && (DISABLED(Y_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMIN))
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN."
#elif Y_SENSORLESS && Y_HOME_DIR == 1 && (DISABLED(Y_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMAX))
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX."
#elif Z_SENSORLESS && Z_HOME_DIR == -1 && (DISABLED(Z_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMIN))
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN."
#elif Z_SENSORLESS && Z_HOME_DIR == 1 && (DISABLED(Z_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMAX))
#error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX."
#elif ENABLED(ENDSTOP_NOISE_FILTER)
#error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER."
#endif
#endif
// Sensorless homing is required for both combined steppers in an H-bot
#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
#error "CoreXY requires both X and Y to use sensorless homing if either does."
#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
#error "CoreXZ requires both X and Z to use sensorless homing if either does."
#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
#error "CoreYZ requires both Y and Z to use sensorless homing if either does."
#endif
#elif ENABLED(SENSORLESS_HOMING)
#error "SENSORLESS_HOMING requires TMC2130 stepper drivers."
#endif
/**
* Make sure HAVE_TMC2208 is warranted
*/
#if ENABLED(HAVE_TMC2208) && !( \
ENABLED( X_IS_TMC2208 ) \
|| ENABLED( X2_IS_TMC2208 ) \
|| ENABLED( Y_IS_TMC2208 ) \
|| ENABLED( Y2_IS_TMC2208 ) \
|| ENABLED( Z_IS_TMC2208 ) \
|| ENABLED( Z2_IS_TMC2208 ) \
|| ENABLED( E0_IS_TMC2208 ) \
|| ENABLED( E1_IS_TMC2208 ) \
|| ENABLED( E2_IS_TMC2208 ) \
|| ENABLED( E3_IS_TMC2208 ) )
#error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
#endif #endif
/** /**
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI) * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
*/ */
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \ #if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
defined(X_HARDWARE_SERIAL ) \ defined(X_HARDWARE_SERIAL ) \
|| defined(X2_HARDWARE_SERIAL) \ || defined(X2_HARDWARE_SERIAL) \
|| defined(Y_HARDWARE_SERIAL ) \ || defined(Y_HARDWARE_SERIAL ) \
@ -1594,113 +1516,52 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE." #error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
#endif #endif
#if ENABLED(SENSORLESS_HOMING)
// Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
// is necessary in order to reset the stallGuard indication between the initial movement of all three
// towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
// clearing the stallGuard activated status is found.
#if ENABLED(DELTA) && !ENABLED(STEALTHCHOP)
#error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP."
#elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN))
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
#elif X_SENSORLESS && X_HOME_DIR == 1 && (DISABLED(X_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMAX))
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX."
#elif Y_SENSORLESS && Y_HOME_DIR == -1 && (DISABLED(Y_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMIN))
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN."
#elif Y_SENSORLESS && Y_HOME_DIR == 1 && (DISABLED(Y_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMAX))
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX."
#elif Z_SENSORLESS && Z_HOME_DIR == -1 && (DISABLED(Z_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMIN))
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN."
#elif Z_SENSORLESS && Z_HOME_DIR == 1 && (DISABLED(Z_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMAX))
#error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX."
#elif ENABLED(ENDSTOP_NOISE_FILTER)
#error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER."
#endif
#endif
// Sensorless homing is required for both combined steppers in an H-bot
#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
#error "CoreXY requires both X and Y to use sensorless homing if either does."
#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
#error "CoreXZ requires both X and Z to use sensorless homing if either does."
#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
#error "CoreYZ requires both Y and Z to use sensorless homing if either does."
#endif
#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) #if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
#error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
#endif #endif
#if ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2)
#if ENABLED(TMC_Z_CALIBRATION) && !Z_IS_TRINAMIC && !Z2_IS_TRINAMIC
#error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis" #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis"
#endif #endif
/** #if ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD
* Make sure HAVE_L6470DRIVER is warranted #error "SENSORLESS_HOMING requires TMC2130 or TMC2660 stepper drivers."
*/
#if ENABLED(HAVE_L6470DRIVER) && !( \
ENABLED( X_IS_L6470 ) \
|| ENABLED( X2_IS_L6470 ) \
|| ENABLED( Y_IS_L6470 ) \
|| ENABLED( Y2_IS_L6470 ) \
|| ENABLED( Z_IS_L6470 ) \
|| ENABLED( Z2_IS_L6470 ) \
|| ENABLED( E0_IS_L6470 ) \
|| ENABLED( E1_IS_L6470 ) \
|| ENABLED( E2_IS_L6470 ) \
|| ENABLED( E3_IS_L6470 ) \
|| ENABLED( E4_IS_L6470 ) \
)
#error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
#endif
/**
* Check that each axis has only one driver selected
*/
#if 1 < 0 \
+ ENABLED(X_IS_TMC26X) \
+ ENABLED(X_IS_TMC2130) \
+ ENABLED(X_IS_TMC2208) \
+ ENABLED(X_IS_L6470)
#error "Please enable only one stepper driver for the X axis."
#endif
#if 1 < 0 \
+ ENABLED(X2_IS_TMC26X) \
+ ENABLED(X2_IS_TMC2130) \
+ ENABLED(X2_IS_TMC2208) \
+ ENABLED(X2_IS_L6470)
#error "Please enable only one stepper driver for the X2 axis."
#endif
#if 1 < 0 \
+ ENABLED(Y_IS_TMC26X) \
+ ENABLED(Y_IS_TMC2130) \
+ ENABLED(Y_IS_TMC2208) \
+ ENABLED(Y_IS_L6470)
#error "Please enable only one stepper driver for the Y axis."
#endif
#if 1 < 0 \
+ ENABLED(Y2_IS_TMC26X) \
+ ENABLED(Y2_IS_TMC2130) \
+ ENABLED(Y2_IS_TMC2208) \
+ ENABLED(Y2_IS_L6470)
#error "Please enable only one stepper driver for the Y2 axis."
#endif
#if 1 < 0 \
+ ENABLED(Z_IS_TMC26X) \
+ ENABLED(Z_IS_TMC2130) \
+ ENABLED(Z_IS_TMC2208) \
+ ENABLED(Z_IS_L6470)
#error "Please enable only one stepper driver for the Z axis."
#endif
#if 1 < 0 \
+ ENABLED(Z2_IS_TMC26X) \
+ ENABLED(Z2_IS_TMC2130) \
+ ENABLED(Z2_IS_TMC2208) \
+ ENABLED(Z2_IS_L6470)
#error "Please enable only one stepper driver for the Z2 axis."
#endif
#if 1 < 0 \
+ ENABLED(E0_IS_TMC26X) \
+ ENABLED(E0_IS_TMC2130) \
+ ENABLED(E0_IS_TMC2208) \
+ ENABLED(E0_IS_L6470)
#error "Please enable only one stepper driver for the E0 axis."
#endif
#if 1 < 0 \
+ ENABLED(E1_IS_TMC26X) \
+ ENABLED(E1_IS_TMC2130) \
+ ENABLED(E1_IS_TMC2208) \
+ ENABLED(E1_IS_L6470)
#error "Please enable only one stepper driver for the E1 axis."
#endif
#if 1 < 0 \
+ ENABLED(E2_IS_TMC26X) \
+ ENABLED(E2_IS_TMC2130) \
+ ENABLED(E2_IS_TMC2208) \
+ ENABLED(E2_IS_L6470)
#error "Please enable only one stepper driver for the E2 axis."
#endif
#if 1 < 0 \
+ ENABLED(E3_IS_TMC26X) \
+ ENABLED(E3_IS_TMC2130) \
+ ENABLED(E3_IS_TMC2208) \
+ ENABLED(E3_IS_L6470)
#error "Please enable only one stepper driver for the E3 axis."
#endif
#if 1 < 0 \
+ ENABLED(E4_IS_TMC26X) \
+ ENABLED(E4_IS_TMC2130) \
+ ENABLED(E4_IS_TMC2208) \
+ ENABLED(E4_IS_L6470)
#error "Please enable only one stepper driver for the E4 axis."
#endif #endif
#if ENABLED(STEALTHCHOP) && !HAS_STEALTHCHOP
#error "STEALTHCHOP requires TMC2130 or TMC2208 stepper drivers."
#endif
/** /**
* Digipot requirement * Digipot requirement

185
Marlin/src/module/configuration_store.cpp
View file

@ -681,57 +681,57 @@ void MarlinSettings::postprocess() {
uint16_t tmc_stepper_current[TMC_AXES] = { uint16_t tmc_stepper_current[TMC_AXES] = {
#if HAS_TRINAMIC #if HAS_TRINAMIC
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
stepperX.getCurrent(), stepperX.getCurrent(),
#else #else
0, 0,
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
stepperY.getCurrent(), stepperY.getCurrent(),
#else #else
0, 0,
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
stepperZ.getCurrent(), stepperZ.getCurrent(),
#else #else
0, 0,
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
stepperX2.getCurrent(), stepperX2.getCurrent(),
#else #else
0, 0,
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
stepperY2.getCurrent(), stepperY2.getCurrent(),
#else #else
0, 0,
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
stepperZ2.getCurrent(), stepperZ2.getCurrent(),
#else #else
0, 0,
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
stepperE0.getCurrent(), stepperE0.getCurrent(),
#else #else
0, 0,
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
stepperE1.getCurrent(), stepperE1.getCurrent(),
#else #else
0, 0,
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
stepperE2.getCurrent(), stepperE2.getCurrent(),
#else #else
0, 0,
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
stepperE3.getCurrent(), stepperE3.getCurrent(),
#else #else
0, 0,
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
stepperE4.getCurrent() stepperE4.getCurrent()
#else #else
0 0
@ -750,57 +750,57 @@ void MarlinSettings::postprocess() {
uint32_t tmc_hybrid_threshold[TMC_AXES] = { uint32_t tmc_hybrid_threshold[TMC_AXES] = {
#if ENABLED(HYBRID_THRESHOLD) #if ENABLED(HYBRID_THRESHOLD)
#if X_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X)
TMC_GET_PWMTHRS(X, X), TMC_GET_PWMTHRS(X, X),
#else #else
X_HYBRID_THRESHOLD, X_HYBRID_THRESHOLD,
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y)
TMC_GET_PWMTHRS(Y, Y), TMC_GET_PWMTHRS(Y, Y),
#else #else
Y_HYBRID_THRESHOLD, Y_HYBRID_THRESHOLD,
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z)
TMC_GET_PWMTHRS(Z, Z), TMC_GET_PWMTHRS(Z, Z),
#else #else
Z_HYBRID_THRESHOLD, Z_HYBRID_THRESHOLD,
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X2)
TMC_GET_PWMTHRS(X, X2), TMC_GET_PWMTHRS(X, X2),
#else #else
X2_HYBRID_THRESHOLD, X2_HYBRID_THRESHOLD,
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y2)
TMC_GET_PWMTHRS(Y, Y2), TMC_GET_PWMTHRS(Y, Y2),
#else #else
Y2_HYBRID_THRESHOLD, Y2_HYBRID_THRESHOLD,
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z2)
TMC_GET_PWMTHRS(Z, Z2), TMC_GET_PWMTHRS(Z, Z2),
#else #else
Z2_HYBRID_THRESHOLD, Z2_HYBRID_THRESHOLD,
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E0)
TMC_GET_PWMTHRS(E, E0), TMC_GET_PWMTHRS(E, E0),
#else #else
E0_HYBRID_THRESHOLD, E0_HYBRID_THRESHOLD,
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E1)
TMC_GET_PWMTHRS(E, E1), TMC_GET_PWMTHRS(E, E1),
#else #else
E1_HYBRID_THRESHOLD, E1_HYBRID_THRESHOLD,
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E2)
TMC_GET_PWMTHRS(E, E2), TMC_GET_PWMTHRS(E, E2),
#else #else
E2_HYBRID_THRESHOLD, E2_HYBRID_THRESHOLD,
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E3)
TMC_GET_PWMTHRS(E, E3), TMC_GET_PWMTHRS(E, E3),
#else #else
E3_HYBRID_THRESHOLD, E3_HYBRID_THRESHOLD,
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E4)
TMC_GET_PWMTHRS(E, E4) TMC_GET_PWMTHRS(E, E4)
#else #else
E4_HYBRID_THRESHOLD E4_HYBRID_THRESHOLD
@ -818,17 +818,17 @@ void MarlinSettings::postprocess() {
// //
int16_t tmc_sgt[XYZ] = { int16_t tmc_sgt[XYZ] = {
#if ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)
#if defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)) #if X_SENSORLESS
stepperX.sgt(), stepperX.sgt(),
#else #else
0, 0,
#endif #endif
#if defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)) #if Y_SENSORLESS
stepperY.sgt(), stepperY.sgt(),
#else #else
0, 0,
#endif #endif
#if defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)) #if Z_SENSORLESS
stepperZ.sgt() stepperZ.sgt()
#else #else
0 0
@ -1311,37 +1311,37 @@ void MarlinSettings::postprocess() {
uint16_t currents[TMC_AXES]; uint16_t currents[TMC_AXES];
EEPROM_READ(currents); EEPROM_READ(currents);
if (!validating) { if (!validating) {
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
SET_CURR(X); SET_CURR(X);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
SET_CURR(Y); SET_CURR(Y);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
SET_CURR(Z); SET_CURR(Z);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
SET_CURR(X2); SET_CURR(X2);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
SET_CURR(Y2); SET_CURR(Y2);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
SET_CURR(Z2); SET_CURR(Z2);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
SET_CURR(E0); SET_CURR(E0);
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
SET_CURR(E1); SET_CURR(E1);
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
SET_CURR(E2); SET_CURR(E2);
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
SET_CURR(E3); SET_CURR(E3);
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
SET_CURR(E4); SET_CURR(E4);
#endif #endif
} }
@ -1355,37 +1355,37 @@ void MarlinSettings::postprocess() {
uint32_t tmc_hybrid_threshold[TMC_AXES]; uint32_t tmc_hybrid_threshold[TMC_AXES];
EEPROM_READ(tmc_hybrid_threshold); EEPROM_READ(tmc_hybrid_threshold);
if (!validating) { if (!validating) {
#if X_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X)
TMC_SET_PWMTHRS(X, X); TMC_SET_PWMTHRS(X, X);
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y)
TMC_SET_PWMTHRS(Y, Y); TMC_SET_PWMTHRS(Y, Y);
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z)
TMC_SET_PWMTHRS(Z, Z); TMC_SET_PWMTHRS(Z, Z);
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(X2)
TMC_SET_PWMTHRS(X, X2); TMC_SET_PWMTHRS(X, X2);
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Y2)
TMC_SET_PWMTHRS(Y, Y2); TMC_SET_PWMTHRS(Y, Y2);
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(Z2)
TMC_SET_PWMTHRS(Z, Z2); TMC_SET_PWMTHRS(Z, Z2);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E0)
TMC_SET_PWMTHRS(E, E0); TMC_SET_PWMTHRS(E, E0);
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E1)
TMC_SET_PWMTHRS(E, E1); TMC_SET_PWMTHRS(E, E1);
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E2)
TMC_SET_PWMTHRS(E, E2); TMC_SET_PWMTHRS(E, E2);
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E3)
TMC_SET_PWMTHRS(E, E3); TMC_SET_PWMTHRS(E, E3);
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_HAS_STEALTHCHOP(E4)
TMC_SET_PWMTHRS(E, E4); TMC_SET_PWMTHRS(E, E4);
#endif #endif
} }
@ -1405,26 +1405,26 @@ void MarlinSettings::postprocess() {
#if ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)
if (!validating) { if (!validating) {
#ifdef X_HOMING_SENSITIVITY #ifdef X_HOMING_SENSITIVITY
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(X)
stepperX.sgt(tmc_sgt[0]); stepperX.sgt(tmc_sgt[0]);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(X2)
stepperX2.sgt(tmc_sgt[0]); stepperX2.sgt(tmc_sgt[0]);
#endif #endif
#endif #endif
#ifdef Y_HOMING_SENSITIVITY #ifdef Y_HOMING_SENSITIVITY
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Y)
stepperY.sgt(tmc_sgt[1]); stepperY.sgt(tmc_sgt[1]);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Y2)
stepperY2.sgt(tmc_sgt[1]); stepperY2.sgt(tmc_sgt[1]);
#endif #endif
#endif #endif
#ifdef Z_HOMING_SENSITIVITY #ifdef Z_HOMING_SENSITIVITY
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_HAS_STALLGUARD(Z)
stepperZ.sgt(tmc_sgt[2]); stepperZ.sgt(tmc_sgt[2]);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_HAS_STALLGUARD(Z2)
stepperZ2.sgt(tmc_sgt[2]); stepperZ2.sgt(tmc_sgt[2]);
#endif #endif
#endif #endif
@ -2445,61 +2445,61 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#if HAS_TRINAMIC #if HAS_TRINAMIC
/** /**
* TMC2130 / TMC2208 / TRAMS stepper driver current * TMC2130 / TMC2208 stepper driver current
*/ */
if (!forReplay) { if (!forReplay) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Stepper driver current:"); SERIAL_ECHOLNPGM_P(port, "Stepper driver current:");
} }
CONFIG_ECHO_START; CONFIG_ECHO_START;
#if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
#endif #endif
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(port, " X", stepperX.getCurrent()); SERIAL_ECHOPAIR_P(port, " X", stepperX.getCurrent());
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(port, " Y", stepperY.getCurrent()); SERIAL_ECHOPAIR_P(port, " Y", stepperY.getCurrent());
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getCurrent()); SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getCurrent());
#endif #endif
#if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
SERIAL_EOL_P(port); SERIAL_EOL_P(port);
#endif #endif
#if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1"); SERIAL_ECHOPGM_P(port, " I1");
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(port, " X", stepperX2.getCurrent()); SERIAL_ECHOPAIR_P(port, " X", stepperX2.getCurrent());
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getCurrent()); SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getCurrent());
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getCurrent()); SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getCurrent());
#endif #endif
#if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
SERIAL_EOL_P(port); SERIAL_EOL_P(port);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T0 E", stepperE0.getCurrent()); SERIAL_ECHOLNPAIR_P(port, " T0 E", stepperE0.getCurrent());
#endif #endif
#if E_STEPPERS > 1 && E1_IS_TRINAMIC #if E_STEPPERS > 1 && AXIS_IS_TMC(E1)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T1 E", stepperE1.getCurrent()); SERIAL_ECHOLNPAIR_P(port, " T1 E", stepperE1.getCurrent());
#endif #endif
#if E_STEPPERS > 2 && E2_IS_TRINAMIC #if E_STEPPERS > 2 && AXIS_IS_TMC(E2)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T2 E", stepperE2.getCurrent()); SERIAL_ECHOLNPAIR_P(port, " T2 E", stepperE2.getCurrent());
#endif #endif
#if E_STEPPERS > 3 && E3_IS_TRINAMIC #if E_STEPPERS > 3 && AXIS_IS_TMC(E3)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T3 E", stepperE3.getCurrent()); SERIAL_ECHOLNPAIR_P(port, " T3 E", stepperE3.getCurrent());
#endif #endif
#if E_STEPPERS > 4 && E4_IS_TRINAMIC #if E_STEPPERS > 4 && AXIS_IS_TMC(E4)
say_M906(PORTVAR_SOLO); say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T4 E", stepperE4.getCurrent()); SERIAL_ECHOLNPAIR_P(port, " T4 E", stepperE4.getCurrent());
#endif #endif
@ -2514,54 +2514,54 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOLNPGM_P(port, "Hybrid Threshold:"); SERIAL_ECHOLNPGM_P(port, "Hybrid Threshold:");
} }
CONFIG_ECHO_START; CONFIG_ECHO_START;
#if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
#endif #endif
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X)); SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X));
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y)); SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y));
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z)); SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z));
#endif #endif
#if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
SERIAL_EOL_P(port); SERIAL_EOL_P(port);
#endif #endif
#if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1"); SERIAL_ECHOPGM_P(port, " I1");
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2)); SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2));
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2)); SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2));
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2)); SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2));
#endif #endif
#if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
SERIAL_EOL_P(port); SERIAL_EOL_P(port);
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T0 E", TMC_GET_PWMTHRS(E, E0)); SERIAL_ECHOLNPAIR_P(port, " T0 E", TMC_GET_PWMTHRS(E, E0));
#endif #endif
#if E_STEPPERS > 1 && E1_IS_TRINAMIC #if E_STEPPERS > 1 && AXIS_IS_TMC(E1)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T1 E", TMC_GET_PWMTHRS(E, E1)); SERIAL_ECHOLNPAIR_P(port, " T1 E", TMC_GET_PWMTHRS(E, E1));
#endif #endif
#if E_STEPPERS > 2 && E2_IS_TRINAMIC #if E_STEPPERS > 2 && AXIS_IS_TMC(E2)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T2 E", TMC_GET_PWMTHRS(E, E2)); SERIAL_ECHOLNPAIR_P(port, " T2 E", TMC_GET_PWMTHRS(E, E2));
#endif #endif
#if E_STEPPERS > 3 && E3_IS_TRINAMIC #if E_STEPPERS > 3 && AXIS_IS_TMC(E3)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T3 E", TMC_GET_PWMTHRS(E, E3)); SERIAL_ECHOLNPAIR_P(port, " T3 E", TMC_GET_PWMTHRS(E, E3));
#endif #endif
#if E_STEPPERS > 4 && E4_IS_TRINAMIC #if E_STEPPERS > 4 && AXIS_IS_TMC(E4)
say_M913(PORTVAR_SOLO); say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T4 E", TMC_GET_PWMTHRS(E, E4)); SERIAL_ECHOLNPAIR_P(port, " T4 E", TMC_GET_PWMTHRS(E, E4));
#endif #endif
@ -2577,26 +2577,23 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:"); SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:");
} }
CONFIG_ECHO_START; CONFIG_ECHO_START;
#define HAS_X_SENSORLESS (defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS))) #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
#define HAS_Y_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)))
#define HAS_Z_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)))
#if HAS_X_SENSORLESS || HAS_Y_SENSORLESS || HAS_Z_SENSORLESS
say_M914(PORTVAR_SOLO); say_M914(PORTVAR_SOLO);
#if HAS_X_SENSORLESS #if X_SENSORLESS
SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt()); SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
#endif #endif
#if HAS_Y_SENSORLESS #if Y_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt()); SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
#endif #endif
#if HAS_Z_SENSORLESS #if Z_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt()); SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt());
#endif #endif
SERIAL_EOL_P(port); SERIAL_EOL_P(port);
#endif #endif
#define HAS_X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && ENABLED(X2_IS_TMC2130)) #define HAS_X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2))
#define HAS_Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && ENABLED(Y2_IS_TMC2130)) #define HAS_Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y2))
#define HAS_Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && ENABLED(Z2_IS_TMC2130)) #define HAS_Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2))
#if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS #if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS
say_M914(PORTVAR_SOLO); say_M914(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1"); SERIAL_ECHOPGM_P(port, " I1");

256
Marlin/src/module/stepper_indirection.cpp
View file

@ -38,7 +38,7 @@
// //
// TMC26X Driver objects and inits // TMC26X Driver objects and inits
// //
#if ENABLED(HAVE_TMC26X) #if HAS_DRIVER(TMC26X)
#include <SPI.h> #include <SPI.h>
#ifdef STM32F7 #ifdef STM32F7
@ -49,37 +49,37 @@
#define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_CS_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR) #define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_CS_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR)
#if ENABLED(X_IS_TMC26X) #if AXIS_DRIVER_TYPE(X, TMC26X)
_TMC26X_DEFINE(X); _TMC26X_DEFINE(X);
#endif #endif
#if ENABLED(X2_IS_TMC26X) #if AXIS_DRIVER_TYPE(X2, TMC26X)
_TMC26X_DEFINE(X2); _TMC26X_DEFINE(X2);
#endif #endif
#if ENABLED(Y_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y, TMC26X)
_TMC26X_DEFINE(Y); _TMC26X_DEFINE(Y);
#endif #endif
#if ENABLED(Y2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y2, TMC26X)
_TMC26X_DEFINE(Y2); _TMC26X_DEFINE(Y2);
#endif #endif
#if ENABLED(Z_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z, TMC26X)
_TMC26X_DEFINE(Z); _TMC26X_DEFINE(Z);
#endif #endif
#if ENABLED(Z2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z2, TMC26X)
_TMC26X_DEFINE(Z2); _TMC26X_DEFINE(Z2);
#endif #endif
#if ENABLED(E0_IS_TMC26X) #if AXIS_DRIVER_TYPE(E0, TMC26X)
_TMC26X_DEFINE(E0); _TMC26X_DEFINE(E0);
#endif #endif
#if ENABLED(E1_IS_TMC26X) #if AXIS_DRIVER_TYPE(E1, TMC26X)
_TMC26X_DEFINE(E1); _TMC26X_DEFINE(E1);
#endif #endif
#if ENABLED(E2_IS_TMC26X) #if AXIS_DRIVER_TYPE(E2, TMC26X)
_TMC26X_DEFINE(E2); _TMC26X_DEFINE(E2);
#endif #endif
#if ENABLED(E3_IS_TMC26X) #if AXIS_DRIVER_TYPE(E3, TMC26X)
_TMC26X_DEFINE(E3); _TMC26X_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_TMC26X) #if AXIS_DRIVER_TYPE(E4, TMC26X)
_TMC26X_DEFINE(E4); _TMC26X_DEFINE(E4);
#endif #endif
@ -89,46 +89,46 @@
}while(0) }while(0)
void tmc26x_init_to_defaults() { void tmc26x_init_to_defaults() {
#if ENABLED(X_IS_TMC26X) #if AXIS_DRIVER_TYPE(X, TMC26X)
_TMC26X_INIT(X); _TMC26X_INIT(X);
#endif #endif
#if ENABLED(X2_IS_TMC26X) #if AXIS_DRIVER_TYPE(X2, TMC26X)
_TMC26X_INIT(X2); _TMC26X_INIT(X2);
#endif #endif
#if ENABLED(Y_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y, TMC26X)
_TMC26X_INIT(Y); _TMC26X_INIT(Y);
#endif #endif
#if ENABLED(Y2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y2, TMC26X)
_TMC26X_INIT(Y2); _TMC26X_INIT(Y2);
#endif #endif
#if ENABLED(Z_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z, TMC26X)
_TMC26X_INIT(Z); _TMC26X_INIT(Z);
#endif #endif
#if ENABLED(Z2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z2, TMC26X)
_TMC26X_INIT(Z2); _TMC26X_INIT(Z2);
#endif #endif
#if ENABLED(E0_IS_TMC26X) #if AXIS_DRIVER_TYPE(E0, TMC26X)
_TMC26X_INIT(E0); _TMC26X_INIT(E0);
#endif #endif
#if ENABLED(E1_IS_TMC26X) #if AXIS_DRIVER_TYPE(E1, TMC26X)
_TMC26X_INIT(E1); _TMC26X_INIT(E1);
#endif #endif
#if ENABLED(E2_IS_TMC26X) #if AXIS_DRIVER_TYPE(E2, TMC26X)
_TMC26X_INIT(E2); _TMC26X_INIT(E2);
#endif #endif
#if ENABLED(E3_IS_TMC26X) #if AXIS_DRIVER_TYPE(E3, TMC26X)
_TMC26X_INIT(E3); _TMC26X_INIT(E3);
#endif #endif
#if ENABLED(E4_IS_TMC26X) #if AXIS_DRIVER_TYPE(E4, TMC26X)
_TMC26X_INIT(E4); _TMC26X_INIT(E4);
#endif #endif
} }
#endif // HAVE_TMC26X #endif // TMC26X
// //
// TMC2130 Driver objects and inits // TMC2130 Driver objects and inits
// //
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
#include <SPI.h> #include <SPI.h>
#include <TMC2130Stepper.h> #include <TMC2130Stepper.h>
@ -146,37 +146,37 @@
#endif #endif
// Stepper objects of TMC2130 steppers used // Stepper objects of TMC2130 steppers used
#if ENABLED(X_IS_TMC2130) #if AXIS_DRIVER_TYPE(X, TMC2130)
_TMC2130_DEFINE(X); _TMC2130_DEFINE(X);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_DRIVER_TYPE(X2, TMC2130)
_TMC2130_DEFINE(X2); _TMC2130_DEFINE(X2);
#endif #endif
#if ENABLED(Y_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y, TMC2130)
_TMC2130_DEFINE(Y); _TMC2130_DEFINE(Y);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y2, TMC2130)
_TMC2130_DEFINE(Y2); _TMC2130_DEFINE(Y2);
#endif #endif
#if ENABLED(Z_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z, TMC2130)
_TMC2130_DEFINE(Z); _TMC2130_DEFINE(Z);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z2, TMC2130)
_TMC2130_DEFINE(Z2); _TMC2130_DEFINE(Z2);
#endif #endif
#if ENABLED(E0_IS_TMC2130) #if AXIS_DRIVER_TYPE(E0, TMC2130)
_TMC2130_DEFINE(E0); _TMC2130_DEFINE(E0);
#endif #endif
#if ENABLED(E1_IS_TMC2130) #if AXIS_DRIVER_TYPE(E1, TMC2130)
_TMC2130_DEFINE(E1); _TMC2130_DEFINE(E1);
#endif #endif
#if ENABLED(E2_IS_TMC2130) #if AXIS_DRIVER_TYPE(E2, TMC2130)
_TMC2130_DEFINE(E2); _TMC2130_DEFINE(E2);
#endif #endif
#if ENABLED(E3_IS_TMC2130) #if AXIS_DRIVER_TYPE(E3, TMC2130)
_TMC2130_DEFINE(E3); _TMC2130_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_TMC2130) #if AXIS_DRIVER_TYPE(E4, TMC2130)
_TMC2130_DEFINE(E4); _TMC2130_DEFINE(E4);
#endif #endif
@ -213,74 +213,74 @@
#define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM)
void tmc2130_init_to_defaults() { void tmc2130_init_to_defaults() {
#if ENABLED(X_IS_TMC2130) #if AXIS_DRIVER_TYPE(X, TMC2130)
_TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]); _TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_DRIVER_TYPE(X2, TMC2130)
_TMC2130_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); _TMC2130_INIT(X2, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if ENABLED(Y_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y, TMC2130)
_TMC2130_INIT( Y, planner.axis_steps_per_mm[Y_AXIS]); _TMC2130_INIT( Y, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y2, TMC2130)
_TMC2130_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); _TMC2130_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if ENABLED(Z_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z, TMC2130)
_TMC2130_INIT( Z, planner.axis_steps_per_mm[Z_AXIS]); _TMC2130_INIT( Z, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z2, TMC2130)
_TMC2130_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); _TMC2130_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if ENABLED(E0_IS_TMC2130) #if AXIS_DRIVER_TYPE(E0, TMC2130)
_TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); _TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]);
#endif #endif
#if ENABLED(E1_IS_TMC2130) #if AXIS_DRIVER_TYPE(E1, TMC2130)
{ constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E2_IS_TMC2130) #if AXIS_DRIVER_TYPE(E2, TMC2130)
{ constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E3_IS_TMC2130) #if AXIS_DRIVER_TYPE(E3, TMC2130)
{ constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E4_IS_TMC2130) #if AXIS_DRIVER_TYPE(E4, TMC2130)
{ constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)
#define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY); #define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY);
#if X_SENSORLESS #if X_SENSORLESS
#if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_DRIVER_TYPE(X, TMC2130)
stepperX.sgt(X_HOMING_SENSITIVITY); stepperX.sgt(X_HOMING_SENSITIVITY);
#endif #endif
#if ENABLED(X2_IS_TMC2130) #if AXIS_DRIVER_TYPE(X2, TMC2130)
stepperX2.sgt(X_HOMING_SENSITIVITY); stepperX2.sgt(X_HOMING_SENSITIVITY);
#endif #endif
#endif #endif
#if Y_SENSORLESS #if Y_SENSORLESS
#if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_DRIVER_TYPE(Y, TMC2130)
stepperY.sgt(Y_HOMING_SENSITIVITY); stepperY.sgt(Y_HOMING_SENSITIVITY);
#endif #endif
#if ENABLED(Y2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y2, TMC2130)
stepperY2.sgt(Y_HOMING_SENSITIVITY); stepperY2.sgt(Y_HOMING_SENSITIVITY);
#endif #endif
#endif #endif
#if Z_SENSORLESS #if Z_SENSORLESS
#if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) #if AXIS_DRIVER_TYPE(Z, TMC2130)
stepperZ.sgt(Z_HOMING_SENSITIVITY); stepperZ.sgt(Z_HOMING_SENSITIVITY);
#endif #endif
#if ENABLED(Z2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z2, TMC2130)
stepperZ2.sgt(Z_HOMING_SENSITIVITY); stepperZ2.sgt(Z_HOMING_SENSITIVITY);
#endif #endif
#endif #endif
#endif #endif
} }
#endif // HAVE_TMC2130 #endif // TMC2130
// //
// TMC2208 Driver objects and inits // TMC2208 Driver objects and inits
// //
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
#include <SoftwareSerial.h> #include <SoftwareSerial.h>
#include <HardwareSerial.h> #include <HardwareSerial.h>
@ -296,77 +296,77 @@
TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)
// Stepper objects of TMC2208 steppers used // Stepper objects of TMC2208 steppers used
#if ENABLED(X_IS_TMC2208) #if AXIS_DRIVER_TYPE(X, TMC2208)
#ifdef X_HARDWARE_SERIAL #ifdef X_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(X); _TMC2208_DEFINE_HARDWARE(X);
#else #else
_TMC2208_DEFINE_SOFTWARE(X); _TMC2208_DEFINE_SOFTWARE(X);
#endif #endif
#endif #endif
#if ENABLED(X2_IS_TMC2208) #if AXIS_DRIVER_TYPE(X2, TMC2208)
#ifdef X2_HARDWARE_SERIAL #ifdef X2_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(X2); _TMC2208_DEFINE_HARDWARE(X2);
#else #else
_TMC2208_DEFINE_SOFTWARE(X2); _TMC2208_DEFINE_SOFTWARE(X2);
#endif #endif
#endif #endif
#if ENABLED(Y_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y, TMC2208)
#ifdef Y_HARDWARE_SERIAL #ifdef Y_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(Y); _TMC2208_DEFINE_HARDWARE(Y);
#else #else
_TMC2208_DEFINE_SOFTWARE(Y); _TMC2208_DEFINE_SOFTWARE(Y);
#endif #endif
#endif #endif
#if ENABLED(Y2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y2, TMC2208)
#ifdef Y2_HARDWARE_SERIAL #ifdef Y2_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(Y2); _TMC2208_DEFINE_HARDWARE(Y2);
#else #else
_TMC2208_DEFINE_SOFTWARE(Y2); _TMC2208_DEFINE_SOFTWARE(Y2);
#endif #endif
#endif #endif
#if ENABLED(Z_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z, TMC2208)
#ifdef Z_HARDWARE_SERIAL #ifdef Z_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(Z); _TMC2208_DEFINE_HARDWARE(Z);
#else #else
_TMC2208_DEFINE_SOFTWARE(Z); _TMC2208_DEFINE_SOFTWARE(Z);
#endif #endif
#endif #endif
#if ENABLED(Z2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z2, TMC2208)
#ifdef Z2_HARDWARE_SERIAL #ifdef Z2_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(Z2); _TMC2208_DEFINE_HARDWARE(Z2);
#else #else
_TMC2208_DEFINE_SOFTWARE(Z2); _TMC2208_DEFINE_SOFTWARE(Z2);
#endif #endif
#endif #endif
#if ENABLED(E0_IS_TMC2208) #if AXIS_DRIVER_TYPE(E0, TMC2208)
#ifdef E0_HARDWARE_SERIAL #ifdef E0_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(E0); _TMC2208_DEFINE_HARDWARE(E0);
#else #else
_TMC2208_DEFINE_SOFTWARE(E0); _TMC2208_DEFINE_SOFTWARE(E0);
#endif #endif
#endif #endif
#if ENABLED(E1_IS_TMC2208) #if AXIS_DRIVER_TYPE(E1, TMC2208)
#ifdef E1_HARDWARE_SERIAL #ifdef E1_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(E1); _TMC2208_DEFINE_HARDWARE(E1);
#else #else
_TMC2208_DEFINE_SOFTWARE(E1); _TMC2208_DEFINE_SOFTWARE(E1);
#endif #endif
#endif #endif
#if ENABLED(E2_IS_TMC2208) #if AXIS_DRIVER_TYPE(E2, TMC2208)
#ifdef E2_HARDWARE_SERIAL #ifdef E2_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(E2); _TMC2208_DEFINE_HARDWARE(E2);
#else #else
_TMC2208_DEFINE_SOFTWARE(E2); _TMC2208_DEFINE_SOFTWARE(E2);
#endif #endif
#endif #endif
#if ENABLED(E3_IS_TMC2208) #if AXIS_DRIVER_TYPE(E3, TMC2208)
#ifdef E3_HARDWARE_SERIAL #ifdef E3_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(E3); _TMC2208_DEFINE_HARDWARE(E3);
#else #else
_TMC2208_DEFINE_SOFTWARE(E3); _TMC2208_DEFINE_SOFTWARE(E3);
#endif #endif
#endif #endif
#if ENABLED(E4_IS_TMC2208) #if AXIS_DRIVER_TYPE(E4, TMC2208)
#ifdef E4_HARDWARE_SERIAL #ifdef E4_HARDWARE_SERIAL
_TMC2208_DEFINE_HARDWARE(E4); _TMC2208_DEFINE_HARDWARE(E4);
#else #else
@ -375,37 +375,37 @@
#endif #endif
void tmc2208_serial_begin() { void tmc2208_serial_begin() {
#if ENABLED(X_IS_TMC2208) #if AXIS_DRIVER_TYPE(X, TMC2208)
X_HARDWARE_SERIAL.begin(115200); X_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(X2_IS_TMC2208) #if AXIS_DRIVER_TYPE(X2, TMC2208)
X2_HARDWARE_SERIAL.begin(115200); X2_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(Y_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y, TMC2208)
Y_HARDWARE_SERIAL.begin(115200); Y_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(Y2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y2, TMC2208)
Y2_HARDWARE_SERIAL.begin(115200); Y2_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(Z_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z, TMC2208)
Z_HARDWARE_SERIAL.begin(115200); Z_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(Z2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z2, TMC2208)
Z2_HARDWARE_SERIAL.begin(115200); Z2_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(E0_IS_TMC2208) #if AXIS_DRIVER_TYPE(E0, TMC2208)
E0_HARDWARE_SERIAL.begin(115200); E0_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(E1_IS_TMC2208) #if AXIS_DRIVER_TYPE(E1, TMC2208)
E1_HARDWARE_SERIAL.begin(115200); E1_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(E2_IS_TMC2208) #if AXIS_DRIVER_TYPE(E2, TMC2208)
E2_HARDWARE_SERIAL.begin(115200); E2_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(E3_IS_TMC2208) #if AXIS_DRIVER_TYPE(E3, TMC2208)
E3_HARDWARE_SERIAL.begin(115200); E3_HARDWARE_SERIAL.begin(115200);
#endif #endif
#if ENABLED(E4_IS_TMC2208) #if AXIS_DRIVER_TYPE(E4, TMC2208)
E4_HARDWARE_SERIAL.begin(115200); E4_HARDWARE_SERIAL.begin(115200);
#endif #endif
} }
@ -449,94 +449,94 @@
#define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM)
void tmc2208_init_to_defaults() { void tmc2208_init_to_defaults() {
#if ENABLED(X_IS_TMC2208) #if AXIS_DRIVER_TYPE(X, TMC2208)
_TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]); _TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if ENABLED(X2_IS_TMC2208) #if AXIS_DRIVER_TYPE(X2, TMC2208)
_TMC2208_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); _TMC2208_INIT(X2, planner.axis_steps_per_mm[X_AXIS]);
#endif #endif
#if ENABLED(Y_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y, TMC2208)
_TMC2208_INIT(Y, planner.axis_steps_per_mm[Y_AXIS]); _TMC2208_INIT(Y, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if ENABLED(Y2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Y2, TMC2208)
_TMC2208_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); _TMC2208_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]);
#endif #endif
#if ENABLED(Z_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z, TMC2208)
_TMC2208_INIT(Z, planner.axis_steps_per_mm[Z_AXIS]); _TMC2208_INIT(Z, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if ENABLED(Z2_IS_TMC2208) #if AXIS_DRIVER_TYPE(Z2, TMC2208)
_TMC2208_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); _TMC2208_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]);
#endif #endif
#if ENABLED(E0_IS_TMC2208) #if AXIS_DRIVER_TYPE(E0, TMC2208)
_TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); _TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]);
#endif #endif
#if ENABLED(E1_IS_TMC2208) #if AXIS_DRIVER_TYPE(E1, TMC2208)
{ constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E2_IS_TMC2208) #if AXIS_DRIVER_TYPE(E2, TMC2208)
{ constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E3_IS_TMC2208) #if AXIS_DRIVER_TYPE(E3, TMC2208)
{ constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
#if ENABLED(E4_IS_TMC2208) #if AXIS_DRIVER_TYPE(E4, TMC2208)
{ constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } { constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); }
#endif #endif
} }
#endif // HAVE_TMC2208 #endif // TMC2208
void restore_stepper_drivers() { void restore_stepper_drivers() {
#if X_IS_TRINAMIC #if AXIS_IS_TMC(X)
stepperX.push(); stepperX.push();
#endif #endif
#if X2_IS_TRINAMIC #if AXIS_IS_TMC(X2)
stepperX2.push(); stepperX2.push();
#endif #endif
#if Y_IS_TRINAMIC #if AXIS_IS_TMC(Y)
stepperY.push(); stepperY.push();
#endif #endif
#if Y2_IS_TRINAMIC #if AXIS_IS_TMC(Y2)
stepperY2.push(); stepperY2.push();
#endif #endif
#if Z_IS_TRINAMIC #if AXIS_IS_TMC(Z)
stepperZ.push(); stepperZ.push();
#endif #endif
#if Z2_IS_TRINAMIC #if AXIS_IS_TMC(Z2)
stepperZ2.push(); stepperZ2.push();
#endif #endif
#if E0_IS_TRINAMIC #if AXIS_IS_TMC(E0)
stepperE0.push(); stepperE0.push();
#endif #endif
#if E1_IS_TRINAMIC #if AXIS_IS_TMC(E1)
stepperE1.push(); stepperE1.push();
#endif #endif
#if E2_IS_TRINAMIC #if AXIS_IS_TMC(E2)
stepperE2.push(); stepperE2.push();
#endif #endif
#if E3_IS_TRINAMIC #if AXIS_IS_TMC(E3)
stepperE3.push(); stepperE3.push();
#endif #endif
#if E4_IS_TRINAMIC #if AXIS_IS_TMC(E4)
stepperE4.push(); stepperE4.push();
#endif #endif
} }
void reset_stepper_drivers() { void reset_stepper_drivers() {
#if ENABLED(HAVE_TMC26X) #if HAS_DRIVER(TMC26X)
tmc26x_init_to_defaults(); tmc26x_init_to_defaults();
#endif #endif
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
delay(100); delay(100);
tmc2130_init_to_defaults(); tmc2130_init_to_defaults();
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
delay(100); delay(100);
tmc2208_init_to_defaults(); tmc2208_init_to_defaults();
#endif #endif
#ifdef TMC_ADV #ifdef TMC_ADV
TMC_ADV() TMC_ADV()
#endif #endif
#if ENABLED(HAVE_L6470DRIVER) #if HAS_DRIVER(L6470)
L6470_init_to_defaults(); L6470_init_to_defaults();
#endif #endif
} }
@ -544,7 +544,7 @@ void reset_stepper_drivers() {
// //
// L6470 Driver objects and inits // L6470 Driver objects and inits
// //
#if ENABLED(HAVE_L6470DRIVER) #if HAS_DRIVER(L6470)
#include <SPI.h> #include <SPI.h>
#include <L6470.h> #include <L6470.h>
@ -552,37 +552,37 @@ void reset_stepper_drivers() {
#define _L6470_DEFINE(ST) L6470 stepper##ST(ST##_ENABLE_PIN) #define _L6470_DEFINE(ST) L6470 stepper##ST(ST##_ENABLE_PIN)
// L6470 Stepper objects // L6470 Stepper objects
#if ENABLED(X_IS_L6470) #if AXIS_DRIVER_TYPE(X, L6470)
_L6470_DEFINE(X); _L6470_DEFINE(X);
#endif #endif
#if ENABLED(X2_IS_L6470) #if AXIS_DRIVER_TYPE(X2, L6470)
_L6470_DEFINE(X2); _L6470_DEFINE(X2);
#endif #endif
#if ENABLED(Y_IS_L6470) #if AXIS_DRIVER_TYPE(Y, L6470)
_L6470_DEFINE(Y); _L6470_DEFINE(Y);
#endif #endif
#if ENABLED(Y2_IS_L6470) #if AXIS_DRIVER_TYPE(Y2, L6470)
_L6470_DEFINE(Y2); _L6470_DEFINE(Y2);
#endif #endif
#if ENABLED(Z_IS_L6470) #if AXIS_DRIVER_TYPE(Z, L6470)
_L6470_DEFINE(Z); _L6470_DEFINE(Z);
#endif #endif
#if ENABLED(Z2_IS_L6470) #if AXIS_DRIVER_TYPE(Z2, L6470)
_L6470_DEFINE(Z2); _L6470_DEFINE(Z2);
#endif #endif
#if ENABLED(E0_IS_L6470) #if AXIS_DRIVER_TYPE(E0, L6470)
_L6470_DEFINE(E0); _L6470_DEFINE(E0);
#endif #endif
#if ENABLED(E1_IS_L6470) #if AXIS_DRIVER_TYPE(E1, L6470)
_L6470_DEFINE(E1); _L6470_DEFINE(E1);
#endif #endif
#if ENABLED(E2_IS_L6470) #if AXIS_DRIVER_TYPE(E2, L6470)
_L6470_DEFINE(E2); _L6470_DEFINE(E2);
#endif #endif
#if ENABLED(E3_IS_L6470) #if AXIS_DRIVER_TYPE(E3, L6470)
_L6470_DEFINE(E3); _L6470_DEFINE(E3);
#endif #endif
#if ENABLED(E4_IS_L6470) #if AXIS_DRIVER_TYPE(E4, L6470)
_L6470_DEFINE(E4); _L6470_DEFINE(E4);
#endif #endif
@ -595,39 +595,39 @@ void reset_stepper_drivers() {
}while(0) }while(0)
void L6470_init_to_defaults() { void L6470_init_to_defaults() {
#if ENABLED(X_IS_L6470) #if AXIS_DRIVER_TYPE(X, L6470)
_L6470_INIT(X); _L6470_INIT(X);
#endif #endif
#if ENABLED(X2_IS_L6470) #if AXIS_DRIVER_TYPE(X2, L6470)
_L6470_INIT(X2); _L6470_INIT(X2);
#endif #endif
#if ENABLED(Y_IS_L6470) #if AXIS_DRIVER_TYPE(Y, L6470)
_L6470_INIT(Y); _L6470_INIT(Y);
#endif #endif
#if ENABLED(Y2_IS_L6470) #if AXIS_DRIVER_TYPE(Y2, L6470)
_L6470_INIT(Y2); _L6470_INIT(Y2);
#endif #endif
#if ENABLED(Z_IS_L6470) #if AXIS_DRIVER_TYPE(Z, L6470)
_L6470_INIT(Z); _L6470_INIT(Z);
#endif #endif
#if ENABLED(Z2_IS_L6470) #if AXIS_DRIVER_TYPE(Z2, L6470)
_L6470_INIT(Z2); _L6470_INIT(Z2);
#endif #endif
#if ENABLED(E0_IS_L6470) #if AXIS_DRIVER_TYPE(E0, L6470)
_L6470_INIT(E0); _L6470_INIT(E0);
#endif #endif
#if ENABLED(E1_IS_L6470) #if AXIS_DRIVER_TYPE(E1, L6470)
_L6470_INIT(E1); _L6470_INIT(E1);
#endif #endif
#if ENABLED(E2_IS_L6470) #if AXIS_DRIVER_TYPE(E2, L6470)
_L6470_INIT(E2); _L6470_INIT(E2);
#endif #endif
#if ENABLED(E3_IS_L6470) #if AXIS_DRIVER_TYPE(E3, L6470)
_L6470_INIT(E3); _L6470_INIT(E3);
#endif #endif
#if ENABLED(E4_IS_L6470) #if AXIS_DRIVER_TYPE(E4, L6470)
_L6470_INIT(E4); _L6470_INIT(E4);
#endif #endif
} }
#endif // HAVE_L6470DRIVER #endif // L6470

96
Marlin/src/module/stepper_indirection.h
View file

@ -47,7 +47,7 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
// TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI // TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI
#if ENABLED(HAVE_TMC26X) #if HAS_DRIVER(TMC26X)
#include <SPI.h> #include <SPI.h>
#ifdef STM32F7 #ifdef STM32F7
#include "../HAL/HAL_STM32F7/TMC2660.h" #include "../HAL/HAL_STM32F7/TMC2660.h"
@ -57,19 +57,19 @@
void tmc26x_init_to_defaults(); void tmc26x_init_to_defaults();
#endif #endif
#if ENABLED(HAVE_TMC2130) #if HAS_DRIVER(TMC2130)
#include <TMC2130Stepper.h> #include <TMC2130Stepper.h>
void tmc2130_init_to_defaults(); void tmc2130_init_to_defaults();
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
#include <TMC2208Stepper.h> #include <TMC2208Stepper.h>
void tmc2208_serial_begin(); void tmc2208_serial_begin();
void tmc2208_init_to_defaults(); void tmc2208_init_to_defaults();
#endif #endif
// L6470 has STEP on normal pins, but DIR/ENABLE via SPI // L6470 has STEP on normal pins, but DIR/ENABLE via SPI
#if ENABLED(HAVE_L6470DRIVER) #if HAS_DRIVER(L6470)
#include <SPI.h> #include <SPI.h>
#include <L6470.h> #include <L6470.h>
void L6470_init_to_defaults(); void L6470_init_to_defaults();
@ -79,7 +79,7 @@ void restore_stepper_drivers(); // Called by PSU_ON
void reset_stepper_drivers(); // Called by settings.load / settings.reset void reset_stepper_drivers(); // Called by settings.load / settings.reset
// X Stepper // X Stepper
#if ENABLED(X_IS_L6470) #if AXIS_DRIVER_TYPE(X, L6470)
extern L6470 stepperX; extern L6470 stepperX;
#define X_ENABLE_INIT NOOP #define X_ENABLE_INIT NOOP
#define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0) #define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0)
@ -88,15 +88,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE) #define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE)
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(X_IS_TMC26X) #if AXIS_DRIVER_TYPE(X, TMC26X)
extern TMC26XStepper stepperX; extern TMC26XStepper stepperX;
#define X_ENABLE_INIT NOOP #define X_ENABLE_INIT NOOP
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE) #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
#define X_ENABLE_READ stepperX.isEnabled() #define X_ENABLE_READ stepperX.isEnabled()
#else #else
#if ENABLED(X_IS_TMC2130) #if AXIS_DRIVER_TYPE(X, TMC2130)
extern TMC2130Stepper stepperX; extern TMC2130Stepper stepperX;
#elif ENABLED(X_IS_TMC2208) #elif AXIS_DRIVER_TYPE(X, TMC2208)
extern TMC2208Stepper stepperX; extern TMC2208Stepper stepperX;
#endif #endif
#define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN) #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN)
@ -112,7 +112,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X_STEP_READ READ(X_STEP_PIN) #define X_STEP_READ READ(X_STEP_PIN)
// Y Stepper // Y Stepper
#if ENABLED(Y_IS_L6470) #if AXIS_DRIVER_TYPE(Y, L6470)
extern L6470 stepperY; extern L6470 stepperY;
#define Y_ENABLE_INIT NOOP #define Y_ENABLE_INIT NOOP
#define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0) #define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0)
@ -121,15 +121,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE) #define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE)
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(Y_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y, TMC26X)
extern TMC26XStepper stepperY; extern TMC26XStepper stepperY;
#define Y_ENABLE_INIT NOOP #define Y_ENABLE_INIT NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE) #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
#define Y_ENABLE_READ stepperY.isEnabled() #define Y_ENABLE_READ stepperY.isEnabled()
#else #else
#if ENABLED(Y_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y, TMC2130)
extern TMC2130Stepper stepperY; extern TMC2130Stepper stepperY;
#elif ENABLED(Y_IS_TMC2208) #elif AXIS_DRIVER_TYPE(Y, TMC2208)
extern TMC2208Stepper stepperY; extern TMC2208Stepper stepperY;
#endif #endif
#define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN) #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN)
@ -145,7 +145,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y_STEP_READ READ(Y_STEP_PIN) #define Y_STEP_READ READ(Y_STEP_PIN)
// Z Stepper // Z Stepper
#if ENABLED(Z_IS_L6470) #if AXIS_DRIVER_TYPE(Z, L6470)
extern L6470 stepperZ; extern L6470 stepperZ;
#define Z_ENABLE_INIT NOOP #define Z_ENABLE_INIT NOOP
#define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0) #define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0)
@ -154,15 +154,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE) #define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE)
#define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR) #define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(Z_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z, TMC26X)
extern TMC26XStepper stepperZ; extern TMC26XStepper stepperZ;
#define Z_ENABLE_INIT NOOP #define Z_ENABLE_INIT NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE) #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
#define Z_ENABLE_READ stepperZ.isEnabled() #define Z_ENABLE_READ stepperZ.isEnabled()
#else #else
#if ENABLED(Z_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z, TMC2130)
extern TMC2130Stepper stepperZ; extern TMC2130Stepper stepperZ;
#elif ENABLED(Z_IS_TMC2208) #elif AXIS_DRIVER_TYPE(Z, TMC2208)
extern TMC2208Stepper stepperZ; extern TMC2208Stepper stepperZ;
#endif #endif
#define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN) #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN)
@ -179,7 +179,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// X2 Stepper // X2 Stepper
#if HAS_X2_ENABLE #if HAS_X2_ENABLE
#if ENABLED(X2_IS_L6470) #if AXIS_DRIVER_TYPE(X2, L6470)
extern L6470 stepperX2; extern L6470 stepperX2;
#define X2_ENABLE_INIT NOOP #define X2_ENABLE_INIT NOOP
#define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0) #define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0)
@ -188,15 +188,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE) #define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE)
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(X2_IS_TMC26X) #if AXIS_DRIVER_TYPE(X2, TMC26X)
extern TMC26XStepper stepperX2; extern TMC26XStepper stepperX2;
#define X2_ENABLE_INIT NOOP #define X2_ENABLE_INIT NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE) #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
#define X2_ENABLE_READ stepperX2.isEnabled() #define X2_ENABLE_READ stepperX2.isEnabled()
#else #else
#if ENABLED(X2_IS_TMC2130) #if AXIS_DRIVER_TYPE(X2, TMC2130)
extern TMC2130Stepper stepperX2; extern TMC2130Stepper stepperX2;
#elif ENABLED(X2_IS_TMC2208) #elif AXIS_DRIVER_TYPE(X2, TMC2208)
extern TMC2208Stepper stepperX2; extern TMC2208Stepper stepperX2;
#endif #endif
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN) #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
@ -214,7 +214,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Y2 Stepper // Y2 Stepper
#if HAS_Y2_ENABLE #if HAS_Y2_ENABLE
#if ENABLED(Y2_IS_L6470) #if AXIS_DRIVER_TYPE(Y2, L6470)
extern L6470 stepperY2; extern L6470 stepperY2;
#define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0) #define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0)
@ -223,15 +223,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE) #define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE)
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(Y2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Y2, TMC26X)
extern TMC26XStepper stepperY2; extern TMC26XStepper stepperY2;
#define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE) #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
#define Y2_ENABLE_READ stepperY2.isEnabled() #define Y2_ENABLE_READ stepperY2.isEnabled()
#else #else
#if ENABLED(Y2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Y2, TMC2130)
extern TMC2130Stepper stepperY2; extern TMC2130Stepper stepperY2;
#elif ENABLED(Y2_IS_TMC2208) #elif AXIS_DRIVER_TYPE(Y2, TMC2208)
extern TMC2208Stepper stepperY2; extern TMC2208Stepper stepperY2;
#endif #endif
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN) #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
@ -249,7 +249,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Z2 Stepper // Z2 Stepper
#if HAS_Z2_ENABLE #if HAS_Z2_ENABLE
#if ENABLED(Z2_IS_L6470) #if AXIS_DRIVER_TYPE(Z2, L6470)
extern L6470 stepperZ2; extern L6470 stepperZ2;
#define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0) #define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0)
@ -258,15 +258,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE) #define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE)
#define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) #define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(Z2_IS_TMC26X) #if AXIS_DRIVER_TYPE(Z2, TMC26X)
extern TMC26XStepper stepperZ2; extern TMC26XStepper stepperZ2;
#define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE) #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
#define Z2_ENABLE_READ stepperZ2.isEnabled() #define Z2_ENABLE_READ stepperZ2.isEnabled()
#else #else
#if ENABLED(Z2_IS_TMC2130) #if AXIS_DRIVER_TYPE(Z2, TMC2130)
extern TMC2130Stepper stepperZ2; extern TMC2130Stepper stepperZ2;
#elif ENABLED(Z2_IS_TMC2208) #elif AXIS_DRIVER_TYPE(Z2, TMC2208)
extern TMC2208Stepper stepperZ2; extern TMC2208Stepper stepperZ2;
#endif #endif
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN) #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
@ -283,7 +283,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif #endif
// E0 Stepper // E0 Stepper
#if ENABLED(E0_IS_L6470) #if AXIS_DRIVER_TYPE(E0, L6470)
extern L6470 stepperE0; extern L6470 stepperE0;
#define E0_ENABLE_INIT NOOP #define E0_ENABLE_INIT NOOP
#define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0) #define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0)
@ -292,15 +292,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE) #define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE)
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(E0_IS_TMC26X) #if AXIS_DRIVER_TYPE(E0, TMC26X)
extern TMC26XStepper stepperE0; extern TMC26XStepper stepperE0;
#define E0_ENABLE_INIT NOOP #define E0_ENABLE_INIT NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE) #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
#define E0_ENABLE_READ stepperE0.isEnabled() #define E0_ENABLE_READ stepperE0.isEnabled()
#else #else
#if ENABLED(E0_IS_TMC2130) #if AXIS_DRIVER_TYPE(E0, TMC2130)
extern TMC2130Stepper stepperE0; extern TMC2130Stepper stepperE0;
#elif ENABLED(E0_IS_TMC2208) #elif AXIS_DRIVER_TYPE(E0, TMC2208)
extern TMC2208Stepper stepperE0; extern TMC2208Stepper stepperE0;
#endif #endif
#define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN) #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN)
@ -316,7 +316,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E0_STEP_READ READ(E0_STEP_PIN) #define E0_STEP_READ READ(E0_STEP_PIN)
// E1 Stepper // E1 Stepper
#if ENABLED(E1_IS_L6470) #if AXIS_DRIVER_TYPE(E1, L6470)
extern L6470 stepperE1; extern L6470 stepperE1;
#define E1_ENABLE_INIT NOOP #define E1_ENABLE_INIT NOOP
#define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0) #define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0)
@ -325,15 +325,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE) #define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE)
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(E1_IS_TMC26X) #if AXIS_DRIVER_TYPE(E1, TMC26X)
extern TMC26XStepper stepperE1; extern TMC26XStepper stepperE1;
#define E1_ENABLE_INIT NOOP #define E1_ENABLE_INIT NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE) #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
#define E1_ENABLE_READ stepperE1.isEnabled() #define E1_ENABLE_READ stepperE1.isEnabled()
#else #else
#if ENABLED(E1_IS_TMC2130) #if AXIS_DRIVER_TYPE(E1, TMC2130)
extern TMC2130Stepper stepperE1; extern TMC2130Stepper stepperE1;
#elif ENABLED(E1_IS_TMC2208) #elif AXIS_DRIVER_TYPE(E1, TMC2208)
extern TMC2208Stepper stepperE1; extern TMC2208Stepper stepperE1;
#endif #endif
#define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN) #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN)
@ -349,7 +349,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E1_STEP_READ READ(E1_STEP_PIN) #define E1_STEP_READ READ(E1_STEP_PIN)
// E2 Stepper // E2 Stepper
#if ENABLED(E2_IS_L6470) #if AXIS_DRIVER_TYPE(E2, L6470)
extern L6470 stepperE2; extern L6470 stepperE2;
#define E2_ENABLE_INIT NOOP #define E2_ENABLE_INIT NOOP
#define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0) #define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0)
@ -358,15 +358,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE) #define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE)
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(E2_IS_TMC26X) #if AXIS_DRIVER_TYPE(E2, TMC26X)
extern TMC26XStepper stepperE2; extern TMC26XStepper stepperE2;
#define E2_ENABLE_INIT NOOP #define E2_ENABLE_INIT NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE) #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
#define E2_ENABLE_READ stepperE2.isEnabled() #define E2_ENABLE_READ stepperE2.isEnabled()
#else #else
#if ENABLED(E2_IS_TMC2130) #if AXIS_DRIVER_TYPE(E2, TMC2130)
extern TMC2130Stepper stepperE2; extern TMC2130Stepper stepperE2;
#elif ENABLED(E2_IS_TMC2208) #elif AXIS_DRIVER_TYPE(E2, TMC2208)
extern TMC2208Stepper stepperE2; extern TMC2208Stepper stepperE2;
#endif #endif
#define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN) #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN)
@ -382,7 +382,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E2_STEP_READ READ(E2_STEP_PIN) #define E2_STEP_READ READ(E2_STEP_PIN)
// E3 Stepper // E3 Stepper
#if ENABLED(E3_IS_L6470) #if AXIS_DRIVER_TYPE(E3, L6470)
extern L6470 stepperE3; extern L6470 stepperE3;
#define E3_ENABLE_INIT NOOP #define E3_ENABLE_INIT NOOP
#define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0) #define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0)
@ -391,15 +391,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE) #define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE)
#define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR) #define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(E3_IS_TMC26X) #if AXIS_DRIVER_TYPE(E3, TMC26X)
extern TMC26XStepper stepperE3; extern TMC26XStepper stepperE3;
#define E3_ENABLE_INIT NOOP #define E3_ENABLE_INIT NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE) #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
#define E3_ENABLE_READ stepperE3.isEnabled() #define E3_ENABLE_READ stepperE3.isEnabled()
#else #else
#if ENABLED(E3_IS_TMC2130) #if AXIS_DRIVER_TYPE(E3, TMC2130)
extern TMC2130Stepper stepperE3; extern TMC2130Stepper stepperE3;
#elif ENABLED(E3_IS_TMC2208) #elif AXIS_DRIVER_TYPE(E3, TMC2208)
extern TMC2208Stepper stepperE3; extern TMC2208Stepper stepperE3;
#endif #endif
#define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN) #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN)
@ -415,7 +415,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E3_STEP_READ READ(E3_STEP_PIN) #define E3_STEP_READ READ(E3_STEP_PIN)
// E4 Stepper // E4 Stepper
#if ENABLED(E4_IS_L6470) #if AXIS_DRIVER_TYPE(E4, L6470)
extern L6470 stepperE4; extern L6470 stepperE4;
#define E4_ENABLE_INIT NOOP #define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0) #define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0)
@ -424,15 +424,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE) #define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE)
#define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR) #define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR)
#else #else
#if ENABLED(E4_IS_TMC26X) #if AXIS_DRIVER_TYPE(E4, TMC26X)
extern TMC26XStepper stepperE4; extern TMC26XStepper stepperE4;
#define E4_ENABLE_INIT NOOP #define E4_ENABLE_INIT NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE) #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
#define E4_ENABLE_READ stepperE4.isEnabled() #define E4_ENABLE_READ stepperE4.isEnabled()
#else #else
#if ENABLED(E4_IS_TMC2130) #if AXIS_DRIVER_TYPE(E4, TMC2130)
extern TMC2130Stepper stepperE4; extern TMC2130Stepper stepperE4;
#elif ENABLED(E4_IS_TMC2208) #elif AXIS_DRIVER_TYPE(E4, TMC2208)
extern TMC2208Stepper stepperE4; extern TMC2208Stepper stepperE4;
#endif #endif
#define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN) #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)

6
Marlin/src/pins/pins_EINSY_RAMBO.h
View file

@ -33,10 +33,8 @@
// //
// TMC2130 Configuration_adv defaults for EinsyRambo // TMC2130 Configuration_adv defaults for EinsyRambo
// //
#if DISABLED(HAVE_TMC2130) #if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130)
#error "You must enable TMC2130 support in Configuration_adv.h for EinsyRambo." #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRambo."
#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130)
#error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRambo."
#endif #endif
// TMC2130 Diag Pins (currently just for reference) // TMC2130 Diag Pins (currently just for reference)

6
Marlin/src/pins/pins_EINSY_RETRO.h
View file

@ -33,10 +33,8 @@
// //
// TMC2130 Configuration_adv defaults for EinsyRetro // TMC2130 Configuration_adv defaults for EinsyRetro
// //
#if DISABLED(HAVE_TMC2130) #if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130)
#error "You must enable TMC2130 support in Configuration_adv.h for EinsyRetro." #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro."
#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130)
#error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRetro."
#endif #endif
// TMC2130 Diag Pins (currently just for reference) // TMC2130 Diag Pins (currently just for reference)

2
Marlin/src/pins/pins_RAMPS.h
View file

@ -146,7 +146,7 @@
#endif #endif
#endif #endif
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
/** /**
* TMC2208 stepper drivers * TMC2208 stepper drivers
* *

2
Marlin/src/pins/pins_RAMPS_FD_V1.h
View file

@ -178,7 +178,7 @@
#endif // ULTRA_LCD #endif // ULTRA_LCD
#if ENABLED(HAVE_TMC2208) #if HAS_DRIVER(TMC2208)
/** /**
* TMC2208 stepper drivers * TMC2208 stepper drivers
* *

10
buildroot/share/tests/megaatmega2560_tests
View file

@ -287,14 +287,20 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
# #
use_example_configs SCARA use_example_configs SCARA
opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130
opt_set E0_DRIVER_TYPE TMC2130
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
exec_test $1 $2 "SCARA with TMC2130" exec_test $1 $2 "SCARA with TMC2130"
# #
# TMC2208 Config # TMC2208 Config
# #
restore_configs restore_configs
opt_enable_adv HAVE_TMC2208 X_IS_TMC2208 Y_IS_TMC2208 Z_IS_TMC2208 opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2208
opt_set Z_DRIVER_TYPE TMC2208
opt_set E0_DRIVER_TYPE TMC2208
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
exec_test $1 $2 "TMC2208 Config" exec_test $1 $2 "TMC2208 Config"
# #