Improvements to Lightweight ST7920 status screen. (#9952)

- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
This commit is contained in:
Marcio Teixeira 2018-03-06 00:49:36 -07:00 committed by Scott Lahteine
parent 0dd1c4458d
commit fd883c909a
2 changed files with 176 additions and 111 deletions

View file

@ -235,6 +235,14 @@ void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void
#define CGRAM_ICON_3_WORD 0x04 #define CGRAM_ICON_3_WORD 0x04
#define CGRAM_ICON_4_WORD 0x06 #define CGRAM_ICON_4_WORD 0x06
const uint8_t degree_symbol_y_top = 1;
PROGMEM const uint8_t degree_symbol[] = {
0b00110000,
0b01001000,
0b01001000,
0b00110000,
};
const uint16_t nozzle_icon[] PROGMEM = { const uint16_t nozzle_icon[] PROGMEM = {
0b0000000000000000, 0b0000000000000000,
0b0000000000000000, 0b0000000000000000,
@ -352,24 +360,54 @@ const uint16_t fan2_icon[] PROGMEM = {
const uint16_t feedrate_icon[] PROGMEM = { const uint16_t feedrate_icon[] PROGMEM = {
0b0000000000000000, 0b0000000000000000,
0b0111111000000000, 0b0111111000000000,
0b0100000000000000, 0b0110000000000000,
0b0100000000000000, 0b0110000000000000,
0b0100000000000000, 0b0110000000000000,
0b0111111011111000, 0b0111111011111000,
0b0100000010000100, 0b0110000011001100,
0b0100000010000100, 0b0110000011001100,
0b0100000010000100, 0b0110000011001100,
0b0100000011111000, 0b0110000011111000,
0b0000000010001000, 0b0000000011001100,
0b0000000010000100, 0b0000000011001100,
0b0000000010000100, 0b0000000011001100,
0b0000000010000010, 0b0000000011001100,
0b0000000000000000, 0b0000000000000000,
0b0000000000000000 0b0000000000000000
}; };
/************************** MAIN SCREEN *************************************/ /************************** MAIN SCREEN *************************************/
// The ST7920 does not have a degree character, but we
// can fake it by writing it to GDRAM.
// This function takes as an argument character positions
// i.e x is [1-16], while the y position is [1-4]
void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool draw) {
const uint8_t *p_bytes = degree_symbol;
if (y > 2) {
// Handle display folding
y -= 2;
x += 16;
}
x -= 1;
y -= 1;
const bool oddChar = x & 1;
const uint8_t x_word = x >> 1;
const uint8_t y_top = degree_symbol_y_top;
const uint8_t y_bot = y_top + sizeof(degree_symbol)/sizeof(degree_symbol[0]);
for(uint8_t i = y_top; i < y_bot; i++) {
uint8_t byte = pgm_read_byte_near(p_bytes++);
set_gdram_address(x_word,i+y*16);
begin_data();
if (draw) {
write_byte(oddChar ? 0x00 : byte);
write_byte(oddChar ? byte : 0x00);
}
else
write_word(0x0000);
}
}
void ST7920_Lite_Status_Screen::draw_static_elements() { void ST7920_Lite_Status_Screen::draw_static_elements() {
scroll_or_addr_select(0); scroll_or_addr_select(0);
@ -406,13 +444,13 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
// If we have only one extruder, draw a long progress bar on the third line // If we have only one extruder, draw a long progress bar on the third line
const uint8_t top = 1, // Top in pixels const uint8_t top = 1, // Top in pixels
bottom = 13, // Bottom in pixels bottom = 13, // Bottom in pixels
left = 8, // Left edge, in 16-bit words left = 12, // Left edge, in 16-bit words
width = 5; // Width of progress bar, in 16-bit words width = 4; // Width of progress bar, in 16-bit words
#else #else
const uint8_t top = 16 + 1, // Top in pixels const uint8_t top = 16 + 1,
bottom = 16 + 13, // Bottom in pixels bottom = 16 + 13,
left = 5, // Left edge, in 16-bit words left = 5,
width = 3; // Width of progress bar, in 16-bit words width = 3;
#endif #endif
const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent? const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent?
@ -439,15 +477,16 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
} }
// Draw the percentage as text in DDRAM // Draw the percentage as text in DDRAM
set_ddram_address(
#if EXTRUDERS == 1 #if EXTRUDERS == 1
DDRAM_LINE_3 + 1 set_ddram_address(DDRAM_LINE_3 + 4);
#else
DDRAM_LINE_2 + left
#endif
);
begin_data(); begin_data();
write_byte(' ');
#else
set_ddram_address(DDRAM_LINE_2 + left);
begin_data();
#endif
// Draw centered
if (value > 9) { if (value > 9) {
write_number(value, 4); write_number(value, 4);
write_str(F("% ")); write_str(F("% "));
@ -481,65 +520,85 @@ void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool
} }
} }
#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 1) #define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 2)
void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target) { static struct {
set_ddram_address(DDRAM_LINE_1 + 1); bool E1_show_target : 1;
begin_data(); bool E2_show_target : 1;
write_number(temp); #if HAS_HEATER_BED
if (target && FAR(temp, target)) { bool bed_show_target : 1;
write_str(F("\x1A"));
write_number(target);
}
else
write_str(F(" "));
}
void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target) {
set_ddram_address(DDRAM_LINE_2 + 1);
begin_data();
write_number(temp);
if (target && FAR(temp, target)) {
write_str(F("\x1A"));
write_number(target);
}
else
write_str(F(" "));
}
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target) {
set_ddram_address(
#if EXTRUDERS == 1
DDRAM_LINE_2 + 1
#else
DDRAM_LINE_3 + 1
#endif #endif
); } display_state = {
true, true
#if HAS_HEATER_BED
, true
#endif
};
void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange) {
switch (line) {
case 1: set_ddram_address(DDRAM_LINE_1 + 1); break;
case 2: set_ddram_address(DDRAM_LINE_2 + 1); break;
case 3: set_ddram_address(DDRAM_LINE_3 + 1); break;
case 4: set_ddram_address(DDRAM_LINE_3 + 1); break;
}
begin_data(); begin_data();
write_number(temp); write_number(temp);
if (target && FAR(temp, target)) {
if (showTarget) {
write_str(F("\x1A")); write_str(F("\x1A"));
write_number(target); write_number(target);
};
if (targetStateChange) {
if (!showTarget) write_str(F(" "));
draw_degree_symbol(6, line, !showTarget);
draw_degree_symbol(10, line, showTarget);
} }
else
write_str(F(" "));
} }
void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(1, temp, target, show_target, display_state.E1_show_target != show_target || forceUpdate);
display_state.E1_show_target = show_target;
}
void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(2, temp, target, show_target, display_state.E2_show_target != show_target || forceUpdate);
display_state.E2_show_target = show_target;
}
#if HAS_HEATER_BED
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(2
#if EXTRUDERS > 1
+ 1
#endif
, temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate
);
display_state.bed_show_target = show_target;
}
#endif
void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) {
set_ddram_address(DDRAM_LINE_1 + 6); set_ddram_address(DDRAM_LINE_1 + 6);
begin_data(); begin_data();
write_number(value, 4); write_number(value, 3);
write_byte('%');
} }
void ST7920_Lite_Status_Screen::draw_print_time(const uint32_t elapsed) { void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) {
const uint8_t hrs = elapsed / 3600, #if EXTRUDERS == 1
min = (elapsed / 60) % 60; set_ddram_address(DDRAM_LINE_3);
char str[7]; #else
sprintf_P(str, hrs > 99 ? PSTR("%03d:%02d") : PSTR(" %02d:%02d"), hrs, min);
set_ddram_address(DDRAM_LINE_3 + 5); set_ddram_address(DDRAM_LINE_3 + 5);
#endif
char str[7];
str[elapsed.toDigital(str)] = ' ';
begin_data(); begin_data();
write_str(str); write_str(str, 6);
} }
void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) {
@ -548,7 +607,8 @@ void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentag
#if EXTRUDERS == 1 #if EXTRUDERS == 1
set_ddram_address(DDRAM_LINE_2 + 6); set_ddram_address(DDRAM_LINE_2 + 6);
begin_data(); begin_data();
write_number(percentage, 4); write_number(percentage, 3);
write_byte('%');
#endif #endif
} }
@ -616,26 +676,23 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
const bool blink = lcd_blink(); const bool blink = lcd_blink();
const uint8_t feedrate_perc = feedrate_percentage; const uint8_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
const float extruder_1_target = thermalManager.degTargetHotend(0); const int16_t extruder_1_target = thermalManager.degTargetHotend(0);
#if EXTRUDERS == 2 #if EXTRUDERS == 2
const float extruder_2_target = thermalManager.degTargetHotend(1); const int16_t extruder_2_target = thermalManager.degTargetHotend(1);
#endif #endif
const float bed_target = thermalManager.degTargetBed(); #if HAS_HEATER_BED
const int16_t bed_target = thermalManager.degTargetBed();
static uint8_t last_checksum = 0; #endif
static uint16_t last_checksum = 0;
const uint8_t checksum = const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target
uint8_t(blink) ^
uint8_t(feedrate_perc) ^
uint8_t(fan_speed) ^
uint8_t(extruder_1_target) ^
#if EXTRUDERS == 2 #if EXTRUDERS == 2
uint8_t(extruder_2_target) ^ ^ extruder_2_target
#endif #endif
uint8_t(bed_target); #if HAS_HEATER_BED
^ bed_target
#endif
;
if (last_checksum == checksum) return false; if (last_checksum == checksum) return false;
last_checksum = checksum; last_checksum = checksum;
return true; return true;
} }
@ -644,33 +701,38 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
if (forceUpdate || indicators_changed()) { if (forceUpdate || indicators_changed()) {
const bool blink = lcd_blink(); const bool blink = lcd_blink();
const duration_t elapsed = print_job_timer.duration(); const duration_t elapsed = print_job_timer.duration();
const uint32_t seconds_elapsed = elapsed.value;
const uint8_t feedrate_perc = feedrate_percentage; const uint8_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
const float extruder_1_temp = thermalManager.degHotend(0); const int16_t extruder_1_temp = thermalManager.degHotend(0),
const float extruder_1_target = thermalManager.degTargetHotend(0); extruder_1_target = thermalManager.degTargetHotend(0);
#if EXTRUDERS == 2 #if EXTRUDERS == 2
const float extruder_2_temp = thermalManager.degHotend(1); const int16_t extruder_2_temp = thermalManager.degHotend(1),
const float extruder_2_target = thermalManager.degTargetHotend(1); extruder_2_target = thermalManager.degTargetHotend(1);
#endif
#if HAS_HEATER_BED
const int16_t bed_temp = thermalManager.degBed(),
bed_target = thermalManager.degTargetBed();
#endif #endif
const float bed_temp = thermalManager.degBed();
const float bed_target = thermalManager.degTargetBed();
draw_extruder_1_temp(extruder_1_temp, extruder_1_target); draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate);
#if EXTRUDERS == 2 #if EXTRUDERS == 2
draw_extruder_2_temp(extruder_2_temp, extruder_2_target); draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate);
#endif
#if HAS_HEATER_BED
draw_bed_temp(bed_temp, bed_target, forceUpdate);
#endif #endif
draw_bed_temp(bed_temp, bed_target);
draw_fan_speed(fan_speed); draw_fan_speed(fan_speed);
draw_print_time(seconds_elapsed); draw_print_time(elapsed);
draw_feedrate_percentage(feedrate_perc); draw_feedrate_percentage(feedrate_perc);
// Update the fan and bed animations // Update the fan and bed animations
if (fan_speed > 0) draw_fan_icon(blink); if (fan_speed > 0) draw_fan_icon(blink);
#if HAS_HEATER_BED
if (bed_target > 0) if (bed_target > 0)
draw_heat_icon(blink, true); draw_heat_icon(blink, true);
else else
draw_heat_icon(false, false); draw_heat_icon(false, false);
#endif
} }
} }
@ -689,7 +751,6 @@ bool ST7920_Lite_Status_Screen::position_changed() {
bool ST7920_Lite_Status_Screen::status_changed() { bool ST7920_Lite_Status_Screen::status_changed() {
uint8_t checksum = 0; uint8_t checksum = 0;
for (const char *p = lcd_status_message; *p; p++) checksum ^= *p; for (const char *p = lcd_status_message; *p; p++) checksum ^= *p;
static uint8_t last_checksum = 0; static uint8_t last_checksum = 0;
if (last_checksum == checksum) return false; if (last_checksum == checksum) return false;
last_checksum = checksum; last_checksum = checksum;
@ -766,23 +827,24 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
} }
void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
const uint8_t percent_done = #if DISABLED(LCD_SET_PROGRESS_MANUALLY)
#if ENABLED(SDSUPPORT) uint8_t progress_bar_percent;
card.percentDone() #endif
#else
0 // Set current percentage from SD when actively printing
#if ENABLED(SDSUPPORT)
if (IS_SD_PRINTING) progress_bar_percent = card.percentDone();
#endif #endif
;
// Since the progress bar involves writing // Since the progress bar involves writing
// quite a few bytes to GDRAM, only do this // quite a few bytes to GDRAM, only do this
// when an update is actually necessary. // when an update is actually necessary.
static uint8_t last_progress = 0; static uint8_t last_progress = 0;
if (!forceUpdate && last_progress == percent_done) return; if (!forceUpdate && last_progress == progress_bar_percent) return;
last_progress = percent_done; last_progress = progress_bar_percent;
draw_progress_bar(percent_done); draw_progress_bar(progress_bar_percent);
} }
void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { void ST7920_Lite_Status_Screen::update(const bool forceUpdate) {

View file

@ -18,6 +18,7 @@
#define STATUS_SCREEN_LITE_ST7920_CLASS_H #define STATUS_SCREEN_LITE_ST7920_CLASS_H
#include "../../core/macros.h" #include "../../core/macros.h"
#include "../../libs/duration_t.h"
typedef const __FlashStringHelper *progmem_str; typedef const __FlashStringHelper *progmem_str;
@ -75,15 +76,17 @@ class ST7920_Lite_Status_Screen {
static uint8_t string_checksum(const char *str); static uint8_t string_checksum(const char *str);
protected: protected:
static void draw_degree_symbol(uint8_t x, uint8_t y, bool draw);
static void draw_static_elements(); static void draw_static_elements();
static void draw_progress_bar(const uint8_t value); static void draw_progress_bar(const uint8_t value);
static void draw_fan_icon(const bool whichIcon); static void draw_fan_icon(const bool whichIcon);
static void draw_heat_icon(const bool whichIcon, const bool heating); static void draw_heat_icon(const bool whichIcon, const bool heating);
static void draw_extruder_1_temp(const int16_t temp, const int16_t target); static void draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange);
static void draw_extruder_2_temp(const int16_t temp, const int16_t target); static void draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
static void draw_bed_temp(const int16_t temp, const int16_t target); static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
static void draw_fan_speed(const uint8_t value); static void draw_fan_speed(const uint8_t value);
static void draw_print_time(const uint32_t elapsed); static void draw_print_time(const duration_t &elapsed);
static void draw_feedrate_percentage(const uint8_t percentage); static void draw_feedrate_percentage(const uint8_t percentage);
static void draw_status_message(const char *str); static void draw_status_message(const char *str);
static void draw_position(const float x, const float y, const float z, bool position_known = true); static void draw_position(const float x, const float y, const float z, bool position_known = true);