Add HAS_TEMP_SENSOR conditional

This commit is contained in:
Scott Lahteine 2018-03-07 01:53:50 -06:00
parent 94f5204629
commit ffbf63e6af
8 changed files with 15 additions and 10 deletions

View file

@ -519,7 +519,7 @@ void idle(
gcode.host_keepalive();
#endif
#if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
#if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
thermalManager.auto_report_temperatures();
#endif

View file

@ -391,7 +391,7 @@ void GcodeSuite::process_parsed_command() {
KEEPALIVE_STATE(NOT_BUSY);
return; // "ok" already printed
#if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
#if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
case 155: M155(); break; // M155: Set temperature auto-report interval
#endif

View file

@ -547,7 +547,7 @@ private:
static void M150();
#endif
#if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
#if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
static void M155();
#endif

View file

@ -37,7 +37,7 @@ void GcodeSuite::M105() {
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
#if HAS_TEMP_SENSOR
SERIAL_PROTOCOLPGM_P(port, MSG_OK);
thermalManager.print_heaterstates(
#if NUM_SERIAL > 1

View file

@ -22,7 +22,7 @@
#include "../../inc/MarlinConfig.h"
#if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
#if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
#include "../gcode.h"
#include "../../module/temperature.h"
@ -37,4 +37,4 @@ void GcodeSuite::M155() {
}
#endif // AUTO_REPORT_TEMPERATURES && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
#endif // AUTO_REPORT_TEMPERATURES && HAS_TEMP_SENSOR

View file

@ -754,6 +754,7 @@
#define HAS_TEMP_4 (PIN_EXISTS(TEMP_4) && TEMP_SENSOR_4 != 0 && TEMP_SENSOR_4 > -2)
#define HAS_TEMP_HOTEND (HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675))
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0 && TEMP_SENSOR_BED > -2)
#define HAS_TEMP_SENSOR (HAS_TEMP_HOTEND || HAS_TEMP_BED)
// Heaters
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
@ -816,6 +817,10 @@
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
#define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
#if !HAS_TEMP_SENSOR
#undef AUTO_REPORT_TEMPERATURES
#endif
/**
* This setting is also used by M109 when trying to calculate
* a ballpark safe margin to prevent wait-forever situation.

View file

@ -417,7 +417,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
// Report heater states every 2 seconds
if (ELAPSED(ms, next_temp_ms)) {
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
#if HAS_TEMP_SENSOR
print_heaterstates();
SERIAL_EOL();
#endif
@ -2144,7 +2144,7 @@ void Temperature::isr() {
ENABLE_TEMPERATURE_INTERRUPT(); //re-enable Temperature ISR
}
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
#if HAS_TEMP_SENSOR
#include "../gcode/gcode.h"
@ -2251,4 +2251,4 @@ void Temperature::isr() {
#endif // AUTO_REPORT_TEMPERATURES
#endif // HAS_TEMP_HOTEND || HAS_TEMP_BED
#endif // HAS_TEMP_SENSOR

View file

@ -564,7 +564,7 @@ class Temperature {
#endif // HEATER_IDLE_HANDLER
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
#if HAS_TEMP_SENSOR
static void print_heaterstates(
#if NUM_SERIAL > 1
const int8_t port = -1