Commit graph

214 commits

Author SHA1 Message Date
Edward Patel
002340f32c Merge branch 'Development-Marlin' into Development 2015-04-07 22:49:12 +02:00
AnHardt
ac843fbf3b Fix lcd_status_message
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
2015-04-07 02:33:34 +02:00
Edward Patel
0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406 Merge branch 'Development-Marlin' into Development
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
2015-04-05 04:06:02 +02:00
AnHardt
340d165a9c Reduce display updates for dogm displays
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.

'lcd_status_update_delay'-loop was not effective in  function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3 Revert "Testloop cleanup"
This reverts commit 6361404b91.
2015-04-04 18:33:36 +02:00
AnHardt
6361404b91 Testloop cleanup
Shifted condition should still be in.
2015-04-04 17:56:13 +02:00
AnHardt
6d4b3f0d6a Move the condition before the loop
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
2015-04-04 17:49:39 +02:00
AnHardt
4cb7dfc546 Move the 'alive dot' in every displayloop
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
2015-04-04 17:34:28 +02:00
Scott Lahteine
61f8394361 Compare indices instead of floats for probe actions 2015-04-04 05:01:16 -07:00
Edward Patel
6b91b7b411 Mesh bed leveling: Added G29 S3 + finer steps in manual probing.
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
2015-04-01 21:18:51 +02:00
AnHardt
19b11dfdd7 Fix can't enter MENU_MULTIPLIER_ITEM 2015-03-31 18:29:16 +02:00
Scott Lahteine
571652c49b Fix LCD click
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
2015-03-31 01:41:24 -07:00
Scott Lahteine
a117b6bff6 Merge pull request #1747 from thinkyhead/progress_bar_tweak
Fix up LCD_PROGRESS_BAR
2015-03-30 23:37:28 -07:00
Scott Lahteine
5519882eea Fix up LCD_PROGRESS_BAR
- Some messages should not expire with `PROGRESS_MSG_EXPIRE`.
- Simplify conditional for progress bar with sanity checks.
- Rename `messageTick` to `expireStatusMillis` and make it the expire
time.
2015-03-30 18:00:54 -07:00
Scott Lahteine
8c136a5ab5 Conditionals and comments for PS = 0 2015-03-30 16:50:05 -07:00
Scott Lahteine
2faed961ce Allow POWER_SUPPLY 0 for no power switch 2015-03-30 16:39:47 -07:00
AnHardt
50a732360a Replace extrudemultiply by extruder_multiply[active_extruder]
Fix for #1460.

Seems to work with only one extruder. Can't test this myself with more.
2015-03-30 13:35:03 +02:00
Scott Lahteine
ba871e46bf Fix compiler warnings
- Patched up for most included configurations
2015-03-27 20:29:05 -07:00
Scott Lahteine
bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji
The big Language Pack
2015-03-27 18:24:19 -07:00
Scott Lahteine
abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper
use only one implementation for beeper feedback
2015-03-27 17:03:38 -07:00
Scott Lahteine
78090275a9 Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
2015-03-26 13:52:48 -07:00
AnHardt
20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	README.md
Solved
2015-03-26 10:05:00 +01:00
Christian Bohn
eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Christian Bohn
4c3cbc0961 use only one implementation for beeper feedback 2015-03-25 12:23:50 +01:00
AnHardt
8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
2015-03-25 09:48:21 +01:00
AnHardt
9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
2015-03-24 16:59:15 +01:00
Scott Lahteine
0d81abe1c9 Merge branch 'Development' into config_testing
Latest upstream commits
2015-03-23 21:13:04 -07:00
nicolas-rambaud
37cde8a191 Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
2015-03-23 12:29:12 +01:00
Scott Lahteine
4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine
691e753cc3 Don't add home offsets in G29
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
2015-03-21 16:30:02 -07:00
Scott Lahteine
15eb5d35a2 Merge branch 'Development' into config_testing
Latest upstream commits
2015-03-21 15:42:45 -07:00
Scott Lahteine
63abeaff38 Merge branch 'Development' into config_testing
Latest upstream commits
2015-03-21 15:03:06 -07:00
Edward Patel
c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-21 14:49:52 +01:00
AnHardt
64e3d33893 Fix shrinked menucode
by updating 'encoderPosition' in END_MENU() line 1.
2015-03-20 23:36:14 +01:00
AnHardt
6bfccaf99e Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
2015-03-20 13:08:18 +01:00
Scott Lahteine
b6d381f863 Divide up Conditionals to get LCD items early 2015-03-20 02:50:28 -07:00
Scott Lahteine
670006b919 Remove invariant code from Configurations
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
2015-03-19 22:22:23 -07:00
Edward Patel
a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 02:28:35 +01:00
Scott Lahteine
a547dc2148 Merge branch 'Development' into optimize_menu_code
Get upstream changes
2015-03-19 13:31:37 -07:00
alexborro
e650d4044e Fix "Stop Print" function in the LCD menu
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
2015-03-19 14:16:18 -03:00
AnHardt
e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
2015-03-19 12:35:43 +01:00
Scott Lahteine
4ce79920e5 Merge pull request #1635 from AnHardt/warnings1
Negative times are unlikly
2015-03-18 19:10:12 -07:00
Scott Lahteine
be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2
lcd_control_retract_menu() is conditional.
2015-03-18 19:09:05 -07:00
AnHardt
5099b86ad4 lcd_autostart_sd() has two conditions.
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
2015-03-18 10:51:13 +01:00
AnHardt
5d81c779cc lcd_control_retract_menu() is conditional.
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
2015-03-18 10:39:59 +01:00
AnHardt
450b89e63c Negative times are unlikly
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
2015-03-18 10:31:34 +01:00
AnHardt
00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji
Conflicts:
	Marlin/language.h
Conflict cleaned
2015-03-16 17:13:49 +01:00
Scott Lahteine
3405f85a6a Reduce size of menu code
- Get rid of _selected functions, passing selected state instead
2015-03-15 22:02:33 -07:00
Edward Patel
8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00