Commit graph

84 commits

Author SHA1 Message Date
Scott Lahteine 05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine 12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
dot-bob a1632cfa0a Added option 'H' to G29 P4.
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
2017-06-25 17:14:08 -05:00
Scott Lahteine 6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine 062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Scott Lahteine d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Roxy-3D 824f71d503 LCD Panel Interactive Mesh Editing (#7045)
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Tannoo 731c8e6372 Translatable Strings for ubl_G29 (#6990) 2017-06-08 10:09:39 -05:00
Scott Lahteine 6bb05c4543 Save 20b in smart_fill_mesh with PROGMEM 2017-06-07 16:07:38 -05:00
bgort 82e662fc69 Remove requirement for LCD when UBL is used. (#6971)
* Remove requirement for LCD when UBL is used.

* fix previous oversights

* further refinement - error messages for P2 & P4

* require R on G26 when not using LCD; default to all points
2017-06-07 02:24:36 -04:00
oldmcg 9f295581f0 Ubl delta fixes and improvements (#6941)
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Scott Lahteine 46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine 6f89db11f0 Allow lcd_setstatusPGM to reset the alert level 2017-05-29 15:31:00 -05:00
Scott Lahteine f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine 85b967657e Embed G26/G29 in ubl class, with enhancements 2017-05-22 17:38:58 -05:00
Scott Lahteine c99bd69889 Apply const float & more 2017-05-22 17:38:36 -05:00
Scott Lahteine c2ea22da49 Clean up whitespace 2017-05-22 17:38:36 -05:00
oldmcg 48f7652143 UBL G29 -P3.1 smart fill (#6823)
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.

* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Roxy-3D 3129260c44 Misc. Clean Up (#6822)
* Misc. Clean Up

Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.

* Huh???   GitHub Desktop screwed up!

* get the planner object in scope

* Fix out of scope z_fade_height

* Travis timed out...

I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
Scott Lahteine 02f15f6775 UBL-related cleanup, spacing, standards
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine 3c061a9f9a UBL tabs, whitespace, spelling, etc. 2017-05-19 14:16:50 -05:00
Scott Lahteine 75badae2f8 Disable PROBE_MANUALLY for UBL
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine 94a4af1d7f Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian 43c24f0027 Fix recent regressions, &c.
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine 6c064bb7d6 Some probe_pt error-handling 2017-05-17 15:33:51 -05:00
Scott Lahteine a3abfeac47 Mark strings needing translation 2017-05-17 03:49:33 -05:00
Scott Lahteine 7f4e4b1212 UBL name/state methods 2017-05-17 03:49:32 -05:00
Brian 7852369987 Implement CRC16, develop mesh allocation table
- Add crc16 utility function
 - Implement CRC16 for config store, remove old checksum, increment layout version
 - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
 - Begin to lay out MAT structure, prototype functions, etc.
 - Rename ubl.state.eeprom_storage_slot to .storage_slot
 - Misc. optimization
 - Cleanup/standardize/improve some messages

This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine 6b6630e11b Clean up trailing whitespace and tabs 2017-05-16 16:06:18 -05:00
Roxy-3D d30e478f97 Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761) 2017-05-16 15:24:24 -05:00
Roxy-3D 8606644343 M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757)
* Fix M48 for Delta's  There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.

* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo 0cd398c25d UBL Menu Updates (#6751)
Things should be pretty stable for a while.   
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Scott Lahteine 0fef9a2983 Remove "ubl." prefix from calls within ubl method 2017-05-16 01:19:45 -05:00
Scott Lahteine 14a4257c7b UBL tabs, whitespace, spelling, etc. 2017-05-16 01:19:45 -05:00
Scott Lahteine 56e2e331ed UBL G29: replace 'O' with 'T'
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine 4ec4ecff1a Reduce find_closest_mesh_point_of_type a little 2017-05-16 01:14:03 -05:00
Roxy-3D 1fbcbc05f6 UBL no longer flout's the sacred GCode standard (#6745)
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine 267f77b18b More constraint on axis_unhomed_error 2017-05-14 16:03:02 -05:00
Scott Lahteine a7fb55ea6d Use GRID_MAX_POINTS. Some formatting 2017-05-12 06:57:19 -05:00
Scott Lahteine ba29da56e0 Add disclaimer for verboten parameters 2017-05-12 02:34:53 -05:00
Scott Lahteine 233f824dd6 Define GRID_MAX_POINTS 2017-05-12 01:32:34 -05:00
Scott Lahteine b0ba5cae73 Fix a spelling boo 2017-05-12 01:32:33 -05:00
oldmcg 91841d75c9 UBL_DELTA (#6695)
UBL on Delta's....     Should be close!    Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort 445003dbb8 Merge pull request #6694 from bgort/g29p2b
UBL:  Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian 5a5dba6fc8 UBL: Minor improvement to G29 P2
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian ae676490c9 M421: Add 'adjust closest point' capability
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Roxy-3D b63e82f309 M421 Mesh Point Offset and misc. UBL clean up (#6685)
* M421 Mesh Point Offset and misc. UBL clean up

Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.

* Better error checking for M421

* Fix M421 Y index bug

I just noticed....  We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Tannoo 66db6c3acc UBL Menu System 1.1
/**
     * UBL System submenu
     *
     *  Prepare
     * - Unified Bed Leveling
     *   - Activate UBL
     *   - Deactivate UBL
     *   - Mesh Storage
     *       Memory Slot:
     *       Load Bed Mesh
     *       Save Bed Mesh
     *   - Output Map
     *       Map Type:
     *       Output Bed Mesh Host / Output Bed Mesh CSV
     *   - UBL Tools
     *     - Build Mesh
     *         Build PLA Mesh
     *         Build ABS Mesh
     *       - Build Custom Mesh
     *           Hotend Temp:
     *           Bed Temp:
     *           Build Custom Mesh
     *         Info Screen
     *       - Build Cold Mesh
     *       - Fill-in Mesh
     *           Fill-in Mesh
     *           Smart Fill-in
     *           Manual Fill-in
     *           Info Screen
     *         Continue Bed Mesh
     *         Invalidate All
     *         Invalidate Closest
     *     - Validate Mesh
     *         PLA Mesh Validation
     *         ABS Mesh Validation
     *       - Custom Mesh Validation
     *           Hotend Temp:
     *           Bed Temp:
     *           Validate Mesh
     *         Info Screen
     *     - Edit Mesh
     *         Fine Tune All
     *         Fine Tune Closest
     *       - Adjust Mesh Height
     *           Height Amount:
     *           Adjust Mesh Height
     *         Info Screen
     *     - Mesh Leveling
     *         3-Point Mesh Leveling
     *       - Grid Mesh Leveling
     *           Side points:
     *           Level Mesh
     *         Info Screen
     *   - Output UBL Info
     */
2017-05-10 12:14:43 -05:00
Scott Lahteine 71396f77d3 Cleanups following recent commits 2017-05-08 14:23:01 -05:00