Scott Lahteine
a4062a47ac
Rename baricuda variables
2016-04-19 19:43:38 -07:00
Scott Lahteine
78747b1328
min_pos/max_pos => sw_endstop_min/sw_endstop_max
2016-04-19 19:43:38 -07:00
Scott Lahteine
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
2016-04-19 18:09:29 -07:00
Scott Lahteine
a26d70e932
Apply indentation to gcode_M303, PID_autotune
2016-04-18 19:04:45 -07:00
Scott Lahteine
ba66336503
Output error for disabled M303
2016-04-18 19:03:45 -07:00
Scott Lahteine
5905ec5ba8
Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
...
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 17:20:02 -07:00
Jeff K
90c49f5a14
Fixed invalid addressing (overflow) of position_shift / software endstops
...
Signed-off-by: Jeff K
2016-04-17 19:28:50 -04:00
Scott Lahteine
c242bee449
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 00:12:46 -07:00
Scott Lahteine
837df6108c
Fix borked set_bed_level_equation_lsq
2016-04-16 20:35:42 -07:00
Scott Lahteine
4b75b11a53
Wrap defines in parentheses in configs, M48
2016-04-16 18:21:09 -07:00
Scott Lahteine
234987ee2f
Fix MBL lift
2016-04-16 14:17:06 -07:00
Scott Lahteine
e0830bf8f1
Don't use LCD alert unless error or alert level is reset later
2016-04-15 18:48:49 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
esenapaj
5ecd75eeb3
Fix for PR #3502(General cleanup of arc code)
2016-04-16 07:22:07 +09:00
gralco
8ec8d59df8
Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME
2016-04-15 11:20:32 -06:00
Scott Lahteine
6e52b0b723
Merge pull request #3504 from thinkyhead/rc_fix_debugging
...
Fix debugging of vector_3
2016-04-14 19:08:30 -07:00
Scott Lahteine
88367a37f7
Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
...
Relating current_position, min_pos, max_pos, and home_offset
2016-04-14 18:50:43 -07:00
Scott Lahteine
b20bf1826d
Fix debugging of vector_3
2016-04-14 18:45:26 -07:00
Scott Lahteine
b243844690
Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
...
General cleanup of arc code
2016-04-14 18:19:44 -07:00
Scott Lahteine
2129db581e
Simplify MBL movement, zigzag
2016-04-14 16:58:42 -07:00
Scott Lahteine
0493fccc0b
mbl.active is a bool now
2016-04-14 16:58:42 -07:00
Scott Lahteine
8e5099fa0c
Update software endstop positions with M206, M428, G92, etc.
2016-04-14 16:47:22 -07:00
Scott Lahteine
5cfb2533d6
Initial cleaning up of arc code
2016-04-14 16:43:49 -07:00
Scott Lahteine
9ce4264fda
Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
...
Document some movement functions, rename a local
2016-04-13 20:55:20 -07:00
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:34:12 -07:00
Scott Lahteine
cfcd3d7b3e
Rename z_offset local to zoffset
2016-04-13 20:09:20 -07:00
Scott Lahteine
5fd20ecac3
Comments on some movement functions
2016-04-13 20:09:20 -07:00
Scott Lahteine
a781a6f955
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 17:41:20 -07:00
Scott Lahteine
525d8256d4
Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
...
Fix: gcode_T using non-existent Z offset
2016-04-12 18:23:08 -07:00
Scott Lahteine
46881c846c
Add comments for extruder offset options
2016-04-12 17:16:58 -07:00
Scott Lahteine
edf376ce0d
Fix: gcode_T using non-existent Z offset
...
As noted by @snowzach in #3461
2016-04-12 17:15:10 -07:00
gralco
178aeb79c8
Implementation of M190 bed temp hysteresis
2016-04-12 08:56:14 -06:00
Scott Lahteine
0439483bc8
Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
...
Add DEBUG_LEVELING output for gcode_T
2016-04-11 21:03:15 -07:00
Scott Lahteine
63d8893f5d
Add DEBUG_LEVELING output for gcode_T
2016-04-11 20:45:10 -07:00
Scott Lahteine
f840c7de4d
Initialize stepper counts for Delta/SCARA
2016-04-11 19:02:35 -07:00
Scott Lahteine
56acaf3594
Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix
...
Fix for M109 and M190 cooldown
2016-04-11 18:01:01 -07:00
gralco
c218db136a
Fix for M109 and M190 cooldown
...
Also removes the re-definition of now inside M190's while loop
2016-04-11 17:12:23 -07:00
Scott Lahteine
c5a2ce4366
Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh
...
Fix home_offset handling and account for it in G29
2016-04-11 16:49:01 -07:00
Scott Lahteine
b1bb1c7989
Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug
...
Add CORE support to st_set_position and plan_set_position
2016-04-11 16:45:00 -07:00
Scott Lahteine
fdee2be49c
More logging of matrix behavior
2016-04-11 00:06:33 -07:00
Scott Lahteine
7f265db3ef
Move sync_plan_position after DEBUG_LEVELING
2016-04-10 23:40:11 -07:00
Scott Lahteine
02550af7c3
Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
...
ELAPSED / PENDING for rollover-safe time checking
2016-04-10 20:25:02 -07:00
Scott Lahteine
803845ec18
Add a case for M113 to process_next_command
2016-04-10 18:53:03 -07:00
Scott Lahteine
386140f361
Test time difference in safe way
2016-04-10 18:09:31 -07:00
Scott Lahteine
1b7356b3a1
Account for home_offset in G29 handler
2016-04-10 15:35:02 -07:00
Scott Lahteine
f3562dd895
Have M206 alter current_position, M428 use new function
2016-04-10 15:35:01 -07:00
Scott Lahteine
6d465321b5
Adjust timeout code in host_keepalive
2016-04-09 16:58:17 -07:00
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
Scott Lahteine
1acf901b63
Adjustments to residency_start_ms handling
2016-04-08 21:20:23 -07:00
gralco
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4
Minor patch ups to G29
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871
Additional DEBUG_LEVELING output
2016-04-08 17:53:15 -07:00
Scott Lahteine
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b
Add M113 to get/set Host Keepalive
2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
2016-04-07 19:25:33 -07:00
Scott Lahteine
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
2016-04-07 19:18:03 -07:00
Scott Lahteine
dc19b69697
No casting needed for SERIAL_ECHOPAIR
2016-04-07 16:33:21 -07:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
2016-04-07 12:50:57 +01:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards
2016-04-07 12:41:09 +01:00
Scott Lahteine
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da
Report the probe position in G30
2016-04-06 16:55:21 -07:00
João Brázio
e48d0263bf
Bugfix: M32 was still using the old print timer
2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
2016-04-06 04:38:42 +01:00
João Brázio
eb61051556
Rework the print job timer to use the stopwatch class
2016-04-06 04:34:03 +01:00
Scott Lahteine
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f
Add more leveling-debug output
2016-04-05 18:31:10 -07:00
Scott Lahteine
56e8e2b0eb
Final tweaks to M111 output
2016-04-04 15:36:07 -07:00
João Brázio
d819a4aff9
Fixes #3346 , followup #3343 : variables must defined with the static keyword to work with PROGMEM when defined inside functions
2016-04-04 15:02:18 +01:00
Scott Lahteine
de39056f68
Merge pull request #3343 from thinkyhead/rc_fix_m111_output
...
Fix M111 output using pgm_read_word, as required
2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0
Fix M111 output using pgm_read_word as required
...
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
2016-04-03 17:33:06 -07:00
Scott Lahteine
d771174797
Merge pull request #3337 from esenapaj/patch-2
...
suppress warnings
2016-04-03 17:01:22 -07:00
Scott Lahteine
d24f14a799
Add HAS_TEMP_HOTEND define
2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c
suppress warnings
2016-04-04 06:48:53 +09:00
Scott Lahteine
80b8fd1cad
Add MSG_HOME_OFFSETS_APPLIED
2016-04-02 18:14:49 -07:00
Scott Lahteine
bc86ee0271
Simplify homeaxis
with some macros
2016-03-30 18:44:05 -07:00
Scott Lahteine
82ef101ed5
Deploy & Stow in G29 for Delta + Z Servo Endstop
2016-03-30 16:41:16 -07:00
Scott Lahteine
de333c4fea
Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
...
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-30 12:16:27 -07:00
Scott Lahteine
8def2c31db
Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
...
Fix temperature checking conditions (backwards!)
2016-03-30 12:10:39 -07:00
Scott Lahteine
8bf5f7c676
Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
...
M104 not starting the print timer
2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498
Fix temperature checking conditions (backwards!)
2016-03-30 11:52:03 -07:00
João Brázio
187c183c20
M104 was not starting the print timer
2016-03-30 11:33:24 +01:00
Scott Lahteine
507aef055f
Patch broken M404
2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-29 20:54:31 -07:00
Scott Lahteine
5f32184254
Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
...
Echo all debug levels in M111, default to DEBUG_NONE
2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570
Add DEBUGGING macro
2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739
Echo all debug levels in M111, default to DEBUG_NONE
...
Redo of #3268 by @jbrazio
2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae
Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
...
Refinements, fixes, reduced stack usage in CardReader
2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521
Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
...
M190 bed temp is never reached
2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60
M190 bed temp was never reached
2016-03-30 01:03:20 +01:00
Scott Lahteine
27d70599d4
Change openFile default to "not-push" instead of "do-replace"
2016-03-29 03:16:35 -07:00
Scott Lahteine
3252df7998
Minor cleanup to filament sensor code
2016-03-28 20:04:34 -07:00
Scott Lahteine
0b8ef5eba6
Split get_command into units, rename to get_available_commands
2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea
Continue on empty lines instead of returning
2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff
Don't store escaped serial characters if comment_mode
2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb
Minor cleanup to command dispatcher
2016-03-28 05:37:36 -07:00
Scott Lahteine
f1ed310322
Add NUMERIC compare macros to simplify code
2016-03-28 03:52:49 -07:00
jbrazio
443e6d26fe
Formatted multi-line comments
2016-03-27 04:36:36 +01:00
Scott Lahteine
e4039a9b5b
Merge pull request #3250 from esenapaj/patch-1
...
Fix typo
2016-03-26 00:41:31 -07:00
Scott Lahteine
cd4c3e90bc
Send a busy signal every 10 seconds instead of every 2
2016-03-25 22:15:40 -07:00
Scott Lahteine
26168676e7
Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames
...
Fix: current_command_args skips digits at the front
2016-03-25 16:38:36 -07:00
esenapaj
f54315c728
Fix typo
...
These are salvaged from closed-PR #3216 .
2016-03-26 08:37:17 +09:00
Scott Lahteine
f423716c6a
Fix: current_command_args skips digits at the front
...
Closes #3245
2016-03-25 16:12:41 -07:00
Scott Lahteine
18de9f55ac
Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes
...
Updated Mesh Bed Leveling
2016-03-25 06:48:12 -07:00
Scott Lahteine
3a1e6b1752
Merge pull request #3243 from AnHardt/homed
...
axis_known_position -> axis_homed
2016-03-25 06:36:46 -07:00
AnHardt
94962ee678
axis_known_position -> axis_homed
...
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.
Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
2016-03-25 14:05:20 +01:00
Edward Patel
14afe1a017
Move to Z=0 for G28 when using Manual Bed Leveling
...
copy of 406992f9dd
2016-03-25 04:58:44 -07:00
Edward Patel
c606ed447a
Add "G29 S4" to fine tune Z level for Mesh Bed Leveling.
...
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
2016-03-25 04:58:43 -07:00
Scott Lahteine
5d8036e554
Code cleanup around MOTOR_CURRENT_PWM options
2016-03-25 04:23:46 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
Scott Lahteine
4823791eb0
Merge pull request #3228 from esenapaj/patch-1
...
Fix spelling
2016-03-25 00:40:51 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
esenapaj
89a845659a
Fix spelling
...
PROBABLE ->PROBEABLE
This is follow-up to #3069 ?
2016-03-25 02:13:37 +09:00
Scott Lahteine
af32a7d5d6
M120/M121 also set endstops non-homing state
2016-03-24 03:24:23 -07:00
Scott Lahteine
04fa9d4f47
Make Autotune options into Menu Edit Items
2016-03-24 02:00:08 -07:00
WPBack
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
2016-03-24 01:47:30 -07:00
WPBack
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
2016-03-24 01:46:37 -07:00
Scott Lahteine
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
Scott Lahteine
f774420488
Merge pull request #3196 from thinkyhead/rc_controllerfan_bug
...
Make DISABLE_INACTIVE_X, etc., true if missing
2016-03-24 00:11:46 -07:00
AnHardt
1c6a16d5bb
Send position updates to RH
...
Send position updates to RH where RH can not know the end position.
For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
2016-03-23 13:30:50 +01:00
AnHardt
6486e8b74a
Call buzz() directly from M428
2016-03-22 15:05:04 +01:00
Scott Lahteine
b1a3a95ad4
Tweak controllerFan to save a cycle or two
2016-03-20 22:11:09 -07:00
Scott Lahteine
10caee2b7c
Merge pull request #3187 from AnHardt/target_extruder_number
...
Fix extrudernum in MSG_INVALID_EXTRUDER
2016-03-20 17:15:22 -07:00
Scott Lahteine
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
Scott Lahteine
7bf5d117e7
Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
...
Delta-compatible extensions to M48
2016-03-20 17:09:18 -07:00
Scott Lahteine
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
2016-03-20 17:05:07 -07:00
AnHardt
338b69c24b
Fix extrudernum in MSG_INVALID_EXTRUDER
...
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
2016-03-20 11:39:06 +01:00
AnHardt
b39b54031b
Fix KEEPALIVE_STATE
...
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
2016-03-20 10:41:56 +01:00
Scott Lahteine
41145e6e81
Patch drain_queued_commands_P
...
Fix a SNAFU that should have been caught in #3012
2016-03-19 20:10:41 -07:00
Scott Lahteine
59483221d5
Move stepper DAC to a separate file
2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
2016-03-19 19:24:26 -07:00
Scott Lahteine
f96bc03081
Add M907-M910 g-codes support for Printrbot Rev. F
2016-03-19 19:24:26 -07:00
Scott Lahteine
cf7c444aff
Apply unknown_position_error elsewhere
2016-03-19 05:13:40 -07:00
Scott Lahteine
eda5190581
Check for known position in M48
2016-03-19 05:13:40 -07:00
Scott Lahteine
68085ca855
Updated M48 friendly for DELTA
...
Partial implementation with reference to MarlinFirmware/Marlin#3011
2016-03-19 05:13:40 -07:00
Scott Lahteine
38b0082bf2
Additional tweaks to M42 exit conditions
2016-03-19 03:10:18 -07:00
Scott Lahteine
4bbea5124d
Support for multiple PWM fans
2016-03-19 03:10:18 -07:00
Scott Lahteine
637cc03686
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
2016-03-19 03:00:58 -07:00
AnHardt
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
4634feaeab
Merge pull request #3012 from thinkyhead/fix_command_injection
...
Use a serial line buffer to prevent queue corruption
2016-03-19 01:43:54 -07:00
Scott Lahteine
963a92ceda
Patch idle forevermore
2016-03-18 22:38:35 -07:00
Scott Lahteine
7ec7bb31c4
Send a Busy signal to hosts during long processes, wait for input, etc
...
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
2016-03-18 22:38:35 -07:00
Scott Lahteine
80277cc9c8
drain_queued_commands_P now returns true if there are more
2016-03-18 17:56:48 -07:00
Scott Lahteine
8fe7420310
Use a separate serial line buffer
2016-03-18 16:46:20 -07:00
Scott Lahteine
7d25c107a8
Merge pull request #3149 from esenapaj/patch-1
...
suppress warnings
2016-03-18 15:40:14 -07:00
Scott Lahteine
e8fa843c2d
Merge pull request #3164 from epatel/epatel/RCBugFix
...
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 02:40:54 -07:00
Scott Lahteine
d7c6fd5c2f
Merge pull request #3146 from thinkyhead/rc_enabled_true_false
...
Support "true" and "false" in the ENABLED macro
2016-03-15 17:35:55 -07:00
Edward Patel
cb0dbfa3b5
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 01:26:00 +01:00
Scott Lahteine
6e1bc03d3b
Additional wrapping for #3140
2016-03-15 01:18:58 -07:00
Scott Lahteine
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
2016-03-15 00:25:34 -07:00
esenapaj
a4314c4907
Use local variable in recalc_delta_settings()
...
diagonal_rod hadn't been used anywhere.
2016-03-15 06:47:27 +09:00
esenapaj
8de7a6f9b1
suppress warnings
2016-03-15 06:34:02 +09:00
Scott Lahteine
4b648793f2
Use ENABLED with DISABLE_[INACTIVE_][XYZ]
2016-03-13 22:15:45 -07:00
Scott Lahteine
3f5fbbd398
Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography
...
Update the bed topography output done by G29
2016-03-13 03:51:43 -07:00
Scott Lahteine
f9ded2a7c4
Wrap macros to prevent bad expansions
2016-03-12 22:38:55 -08:00
jbrazio
a645860431
All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()
2016-03-12 07:16:39 +00:00
jbrazio
1981e53d68
M109 R option if misused could cause a wait-forever situation
2016-03-12 06:24:24 +00:00
João Brázio
4d4a842cfb
Update the bed topography output done by G29
2016-03-10 13:24:17 +00:00
João Brázio
793cd0ae3b
Clean up the code a bit
2016-03-10 11:52:43 +00:00
jbrazio
986b508ff7
Print timer now stops when it sees the last extruder temperature being shutdown
2016-03-08 18:11:02 +00:00
AnHardt
fd5414c6ea
Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
...
rebased
corrected spelling
changed to #elif for error
Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
2016-03-08 17:50:23 +01:00
Scott Lahteine
b7928a000a
Merge pull request #3108 from AnHardt/M110+
...
M110 and M29 rework
2016-03-08 03:54:07 -08:00
Scott Lahteine
5cba0b4187
Merge pull request #3111 from thinkyhead/rc_drop_old_condition
...
Drop obsolete test for leading "N"
2016-03-08 03:07:25 -08:00
Scott Lahteine
302d1bfbc4
Drop obsolete test for leading "N"
2016-03-08 02:25:11 -08:00
AnHardt
37b857e8ec
M110 ang M29 rework
...
Add 'ok' output for G29 actually closing the file.
Handle M110 when received without linenumber/checksumm.
2016-03-07 22:27:01 +01:00
Scott Lahteine
fac85f6fa1
Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements
...
Bugfix: G28 was lifting Z-axis multiple times
2016-03-07 03:52:00 -08:00
jbrazio
642e3699ce
Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero
2016-03-07 03:49:11 +00:00
Scott Lahteine
501f63802a
Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill
...
Add Watchdog timer reset in kill()
2016-03-06 16:21:39 -08:00
Scott Lahteine
ef68c1910c
Check that the temperature is close to target
2016-03-06 05:51:56 -08:00
Scott Lahteine
ea9fd1200b
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
2016-03-06 05:51:56 -08:00
Scott Lahteine
ff13070b59
Use _BV macros, patch up others
2016-03-06 05:51:55 -08:00
Scott Lahteine
209f5f21e0
Use macros where possible
...
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
2016-03-06 05:51:55 -08:00
Scott Lahteine
6e64895c30
Merge pull request #3001 from AlwaysTinkering/RCBugFix
...
Rc bug fix - Fix for issue #2931
2016-03-06 00:20:29 -08:00
Scott Lahteine
34b8b9f0f5
Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz
...
Add CORE support to st_get_position_mm (and elsewhere)
2016-03-06 00:17:03 -08:00
Scott Lahteine
3a3d358df9
Fix Printrboard with LCD (redo)
...
Based on #2860 - rebased for RCBugFix
2016-03-05 22:13:00 -08:00
Scott Lahteine
eb85342fd9
Merge pull request #2989 from AnHardt/fix2661
...
Pre home display - Stepper release
2016-03-05 21:30:17 -08:00
Scott Lahteine
14f3ca1b2e
Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix
...
Apply bed leveling matrix when switching extruders
2016-03-05 21:23:25 -08:00
lrpirlet
0fb507a75d
correct raise_z_for_servo
2016-03-05 20:19:53 -08:00
Blue-Marlin
b4e5e0f11d
Add Watchdog reset in kill()
...
Add watchdog reset in the kill loop to simplify recovering.
2016-03-04 00:35:18 +01:00
Scott Lahteine
222d13d5ed
Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset
...
Code cleanup in gcode_T
2016-03-02 03:45:40 -08:00
Scott Lahteine
186629aee8
Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix
...
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
2016-03-02 03:14:27 -08:00
jbrazio
67e15aac3d
As pointed out by @Blue-Marlin the previous code would raise the Z axis
...
twice for a servo based probe.
2016-03-01 00:22:48 +00:00
jbrazio
17cc2a9663
Z_RAISE_AFTER_PROBING value was being ignored by Marlin because
...
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
2016-02-29 15:48:26 +00:00
AnHardt
1c889cd303
Refresh previous_cmd_ms during run_z_probe()
...
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238 )
2016-02-28 23:20:12 +01:00
AnHardt
4b02f33e69
Distribute config-changes to the other configurations
2016-02-28 23:20:04 +01:00
AnHardt
32ae9f9ab7
Fix stepper shutdown during waiting for temperatures
...
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.
The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.
# Conflicts:
# Marlin/Configuration_adv.h
2016-02-28 16:58:50 +01:00
AnHardt
b6e69e71ce
Make stepper shutdown after inactivity dependent
...
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E
And make exemplaric Configuration.
Names can be discussed.
This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
2016-02-28 16:58:42 +01:00
AnHardt
051325ccd7
Introduce axis_homed
...
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".
# Conflicts:
# Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
2016-02-28 16:58:28 +01:00
Scott Lahteine
100271e6ac
minor cleanup in gcode_T
2016-02-27 19:56:56 -08:00
Scott Lahteine
6a4f06d35d
Fix GCode handling of spaces between command letter and first digit
2016-02-26 18:42:59 -08:00
CONSULitAS
ea8409ad5d
Fix: current_command_args contains command
...
@thinkyhead
Hi Scott,
your code from a0f362c@thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.
see also
https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f
6f8e3c2f17ecc770 lines 941, 2851 and so on
Greetings and welcome back
Jochen
2016-02-24 09:35:04 +01:00
Scott Lahteine
e1beaf61eb
Merge pull request #2985 from AnHardt/adv-ok
...
Repair N in ADVANCED_OK
2016-02-18 17:06:26 -08:00
Scott Lahteine
0c9db67273
Merge pull request #2983 from AnHardt/ok-echo
...
Replace the "ok" in M280, M301, M304, M851 with output not including …
2016-02-17 19:09:41 -08:00
Scott Lahteine
8eaba020fb
Merge pull request #2973 from thinkyhead/fix_splash_url
...
Remove references to marlinfirmware.org
2016-02-17 17:05:06 -08:00
Scott Lahteine
be691b51f1
Remove references to marlinfirmware.org
...
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
2016-02-17 14:41:46 -08:00
Scott Lahteine
83ffc9eb4f
Show raw steps in M114
...
This is a proposed change. This section of M114 output is a debug
extension according to RepRap wiki.
2016-02-15 15:59:24 -08:00
Scott Lahteine
373e8a1ad4
Fixes for COREXY and COREXZ coordinates
2016-02-15 15:59:24 -08:00