Matthew Schick
6cd85e6008
Add support for disabling encoder control for feedrate multiplier
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-03-12 18:13:50 -04:00
blddk
09af1b90b8
Added CHDK support
...
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:57:08 +01:00
blddk
765b2da3d4
Added CHDK support
...
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:52:33 +01:00
paciotti
881e348eed
Update Configuration_adv.h
...
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
2014-03-08 22:35:05 +01:00
Tommi Lamberg
15d1b8d719
Fixed finnish translation
...
- Fixed Few finnish transalations
- Removed duplicate contrast define
2014-03-05 14:02:52 +02:00
ErikZalm
7f76a0e064
Merge pull request #813 from drf5n/PID_DEBUG
...
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 17:31:48 +01:00
Erik van der Zalm
fcd8524b6e
Only increase EEPROM version for DELTA printers.
2014-02-26 17:29:27 +01:00
Jim Morris
8ea5665ee2
Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2014-02-26 00:19:28 -08:00
David Forrest
8c4377dd63
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 00:44:22 -05:00
ErikZalm
fde8c2c310
Merge pull request #807 from Cylindric3D/typofixes_upstream5
...
Various typo fixes #5 - only in comments, no code changes.
2014-02-25 18:49:41 +01:00
Cylindric
fdce91192e
Various typo fixes - only in comments, no code changes.
2014-02-25 10:01:15 +00:00
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
2014-02-25 09:52:58 +00:00
ErikZalm
fd4542f33a
Merge pull request #805 from whosawhatsis/M200
...
autretract fix
2014-02-24 22:35:08 +01:00
ErikZalm
e8291ed728
Merge pull request #802 from Makers-Tool-Works/Marlin_v1
...
Clarify which PID values to enter
2014-02-24 22:31:13 +01:00
ErikZalm
465b654d24
Merge pull request #797 from Cylindric3D/update_menu_plan
...
Update menu plan
2014-02-24 22:30:19 +01:00
ErikZalm
88506a80c3
Merge pull request #789 from smiler/Marlin_v1
...
Fixed typo.
2014-02-24 22:26:31 +01:00
ErikZalm
b514d3c87f
Merge pull request #781 from Cylindric3D/typofixes_upstream
...
Various typo fixes #3 - only in comments, no code changes.
2014-02-24 22:25:38 +01:00
whosawhatsis
77df0d689a
autretract fix
...
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.
Conflicts:
Marlin/Configuration_adv.h
Marlin/Marlin_main.cpp
2014-02-24 13:24:38 -08:00
ErikZalm
cc5f1d475c
Merge pull request #772 from ellensp/Marlin_v1
...
Updated gen3+ board pins names to current convention
2014-02-24 22:22:15 +01:00
Cylindric
91759dede6
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-24 17:29:37 +00:00
Cylindric
557217fc05
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-24 17:29:24 +00:00
RoyOnWheels
aee63afccd
Clarify which PID values to enter
...
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
2014-02-23 14:36:50 -08:00
Gabe Rosenhouse
99f6326544
Remove unnecessary dependency on time.h from qr_solve.cpp
...
Fixed compiler errors on Ubuntu using arduino-core
2014-02-20 16:43:37 -08:00
Cylindric
ea669cb504
Fix some extra and some missing tabs, to make the file consistent.
2014-02-20 14:28:29 +00:00
Cylindric
b46a1b6360
Update the menu plan document with the current menu as per ultralcd.cpp.
2014-02-20 14:20:27 +00:00
Cylindric
3cc7626d1f
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-20 14:12:10 +00:00
Gabe Rosenhouse
174b8d99d5
Simplify 3-point probing using new code only
2014-02-19 21:48:05 -08:00
Gabe Rosenhouse
3b718b816c
better documentation
2014-02-19 14:04:37 -08:00
Gabe Rosenhouse
34fd59c370
ABL at any points
2014-02-19 13:18:21 -08:00
Cylindric
541155ea87
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-19 15:52:18 +00:00
alexborro
9fa328e5c8
Merge pull request #793 from MissionSt/use_axis_enums
...
Use constants instead of numeric literals
2014-02-19 10:15:57 -03:00
Gabe Rosenhouse
f308a8af91
update comment
2014-02-19 01:06:24 -08:00
Gabe Rosenhouse
357e31270a
Prevent G29 without first homing in X and Y
...
If position is unknown, then G29 can be dangerous.
2014-02-19 00:51:43 -08:00
Gabe Rosenhouse
d2d7d186b5
Use descriptive constants, more
2014-02-19 00:10:17 -08:00
Gabe Rosenhouse
2ccdf4f36d
Use descriptive constants instead of numeric literals
2014-02-19 00:02:59 -08:00
Christian Axelsson
c00383f286
Fixed typo.
2014-02-18 18:50:12 +01:00
Cylindric
60f72a78a9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 17:31:58 +00:00
nothinman
abba7a0003
Merge pull request #782 from marcovannoord/Marlin_v1
...
Added dutch to language.h
2014-02-18 16:19:50 +00:00
Cylindric
b868d668fa
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 12:11:01 +00:00
Marco
8212d8d543
Revert "Fixed small typo that would prevent compiling"
...
This reverts commit 51ae4881ab
.
2014-02-18 10:40:25 +01:00
daid
46bae30573
Merge pull request #776 from whosawhatsis/fwretract
...
Fwretract fixes, cleanup
2014-02-18 10:39:28 +01:00
Marco
51ae4881ab
Fixed small typo that would prevent compiling
2014-02-18 09:47:36 +01:00
Marco
498d76fd79
Fixed some messages where the text shown on the screen was more than 17 characters
2014-02-18 09:40:10 +01:00
Jim Morris
af9395ac2e
Add M605 to dynamically set delta configuration
...
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
2014-02-17 20:50:59 -08:00
nothinman
fd42f0d226
Merge pull request #783 from MissionSt/fix/syntax-error
...
Fix compile error
2014-02-17 20:59:43 +00:00
nothinman
96217bf36a
Merge pull request #777 from PxT/M114
...
Add whitespace to M114 output
2014-02-17 18:07:47 +00:00
Marco
cf5c3b6610
Added dutch to language.h
2014-02-17 17:00:50 +01:00
Gabe Rosenhouse
d1c64b9dc4
Fix syntax error introduced in 477b6fa1d
2014-02-17 07:56:19 -08:00
Cylindric
5d50819791
Various typo fixes - only in comments, no code changes.
2014-02-17 13:04:44 +00:00
nothinman
3f455889d0
Merge pull request #769 from Cylindric3D/typofixes_1
...
Various typo fixes - only in comments, no code changes.
2014-02-17 11:30:01 +00:00
nothinman
4ddedb3b27
Merge pull request #780 from Cylindric3D/typofixes_2
...
Various typo fixes #2 - only in comments, no code changes.
2014-02-17 11:29:18 +00:00
nothinman
d4ba23bc28
Merge pull request #770 from josefpavlik/Marlin_v1
...
Marlin v1
2014-02-17 11:27:05 +00:00
nothinman
bbb424bd2f
Merge pull request #779 from MissionSt/makefile-fix-abl
...
Makefile fixes
2014-02-17 11:22:34 +00:00
Cylindric
8f0cee2a14
Various typo fixes - only in comments, no code changes.
2014-02-17 10:58:36 +00:00
Cylindric
08263ae66e
Merge branch 'Marlin_v1' into typofixes_1
2014-02-17 10:28:20 +00:00
Gabe Rosenhouse
5bd09d26e2
Makefile works with auto bed leveling
2014-02-16 23:23:29 -08:00
Gabe Rosenhouse
b45beeffd6
typo fix in Makefile
2014-02-16 23:23:29 -08:00
Paul Telford
306588925d
Add whitespace to M114 output
2014-02-16 21:01:19 -08:00
whosawhatsis
c43838bb1e
disable auto retract by default
...
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
2014-02-16 19:04:54 -08:00
whosawhatsis
99f0e44864
Move FWRETRACT defaults to configuration_adv.h
2014-02-16 19:00:28 -08:00
whosawhatsis
66e3869138
Fix autoretract
...
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
2014-02-16 18:59:04 -08:00
whosawhatsis
2f2459c0db
Fix G10/G11 Z-lift
2014-02-16 18:15:34 -08:00
Gabe Rosenhouse
8c5675c290
Use language.h instead of English literals for "bed"
2014-02-16 17:16:00 -08:00
Gabe Rosenhouse
0f7393a13e
Refactor 'accurate' auto bed leveling to use probe_pt()
2014-02-16 10:44:15 -08:00
Gabe Rosenhouse
c4fbb44d6d
Refactor 3-point auto bed leveling to use probe_pt()
2014-02-16 10:44:08 -08:00
Gabe Rosenhouse
ad2c6488c7
Add probe_pt(), useful for auto bed leveling
2014-02-16 10:38:29 -08:00
Peter
c9c83a4560
Updated gen3+ board pins names to current convention
2014-02-16 00:47:06 +13:00
Mark Hanford
ab0d3c4fb3
Various typo fixes - only in comments, no code changes.
2014-02-14 11:48:24 +00:00
Josef Pavlik
477b6fa1df
move engaged from lcd console refreshes power off timeout
2014-02-14 12:37:21 +01:00
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:26:27 +01:00
nothinman
7dcd350941
A few changes to Russian, changed LCD strings to be <=17 characters.
2014-02-13 11:58:14 +00:00
daid
c31bb2b7ad
Only show the ZProbe offset when auto-bed-leveling is enabled.
2014-02-13 11:48:55 +01:00
daid
46f5bea19f
Add configurable beep for UltiPanel.
2014-02-13 11:17:33 +01:00
daid
d16a770855
Ultimainboard 2.x does not has a PS_ON pin.
2014-02-13 10:57:03 +01:00
daid
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
2014-02-13 10:53:46 +01:00
daid
9b7d87e885
Remove duplicate contrast define.
2014-02-13 10:50:17 +01:00
daid
816f0a678a
Merge pull request #768 from whosawhatsis/Marlin_v1
...
multiple FWretract fixes
2014-02-13 09:14:57 +01:00
whosawhatsis
6e43398509
G10/G11 bugfixes
...
Previous version was broken by using G92 E0 between retract and recover.
2014-02-12 13:03:00 -08:00
whosawhatsis
d6c5c503d4
correct feedrate units in comments for M207/M208
2014-02-12 13:02:47 -08:00
nothinman
15d6116188
Merge pull request #689 from cajun-rat/tidy
...
Use C++ initialization list
2014-02-12 16:38:11 +00:00
Martin Lukasik
0b9ecf3824
Language cleanup, part 1.
2014-02-12 13:21:26 +00:00
whosawhatsis
b5ba5c1465
Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1
2014-02-11 19:06:03 -08:00
whosawhatsis
78e7654601
Keep FWRETRACT values in terms of millimeters when using M200
...
for volumetric E units
2014-02-11 19:05:35 -08:00
whosawhatsis
3f6d44d40b
Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units
2014-02-11 18:50:11 -08:00
Cylindric
363dc2f0e8
Merge branch 'Marlin_v1' into update_menu_plan
2014-02-12 00:51:16 +00:00
nothinman
5f797ca29f
Updated Polish, changed default firmware URL to Marlin.
2014-02-11 22:38:01 +00:00
Mark Hanford
0778f5f028
Add missing entries to the new Aragonian language.
2014-02-11 14:40:53 +00:00
Mark Hanford
54bab3e0d0
Merge branch 'Marlin_v1' into localisation
...
Conflicts:
Marlin/language.h
2014-02-11 14:35:28 +00:00
Mark Hanford
bdd0211aeb
Move strings in ultralcd.cpp into language.h.
2014-02-11 13:54:43 +00:00
Daniel Martinez
c8e5a82d49
keep English as default lang.
2014-02-09 18:24:24 +01:00
Daniel Martinez
f64592e362
Add Aragonese translation
2014-02-09 18:19:37 +01:00
ErikZalm
ac74f45dc0
Merge pull request #752 from MatixYo/patch-3
...
Update language.h
2014-02-09 17:52:26 +01:00
MatixYo
36086d3ca4
Update language.h
...
Updated Polish translations.
2014-02-07 19:15:51 +01:00
Cylindric
1781031f2d
Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h.
2014-02-07 01:52:44 +00:00
Jim Morris
d485988bec
fix typo
2014-02-05 14:39:45 -08:00
Jim Morris
8a1fd25363
Default is to not define digipot_i2c
2014-02-05 14:28:23 -08:00
Jim Morris
5097c57d3a
Added pins for Azteeg X3 Pro under motherboard 68
2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
ErikZalm
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
2014-02-03 12:33:10 -08:00
David Forrest
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
2014-02-03 14:50:28 -05:00
Ronald
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
whosawhatsis
b2c11ba980
Change diameter code to 'D'
...
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.
Also some minor code improvements to M200.
2014-02-01 18:49:25 -08:00
ErikZalm
61059385a3
Merge pull request #737 from whosawhatsis/M200
...
M200 implementation
2014-02-01 10:37:49 -08:00
whosawhatsis
856edfcc0d
Fixed math
...
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
2014-01-31 08:43:11 -08:00
ErikZalm
0d81ae77bc
Merge pull request #727 from drf5n/oversampling
...
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
2014-01-31 07:09:10 -08:00
ErikZalm
84df13f7d1
Merge pull request #721 from drf5n/lcdOnly
...
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-31 07:07:12 -08:00
ErikZalm
4c7e9502ad
Merge pull request #718 from drf5n/temptableRes
...
createTemperatureLookupMarlin.py: Add resolution comments and format for...
2014-01-31 07:06:02 -08:00
ErikZalm
652a0f6b5a
Merge pull request #717 from drf5n/tpins2
...
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
2014-01-31 07:05:20 -08:00
ErikZalm
96a0cdc541
Merge pull request #716 from drf5n/maketeensy
...
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
2014-01-31 07:04:29 -08:00
whosawhatsis
d24df7af2c
M200 implementation
2014-01-31 00:54:19 -08:00
David Forrest
f0b8d5ba3d
createTemperatureLookupMarlin.py: Change comment to refer to actual program name.
2014-01-29 23:34:22 -05:00
David Forrest
50f44d9249
createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution.
2014-01-29 23:24:07 -05:00
David Forrest
f5b5dd8038
createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients.
2014-01-29 22:59:47 -05:00
David Forrest
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
2014-01-21 23:25:51 -05:00
David Forrest
476c7193d8
temperature.cpp: Use OVERSAMPLENR in oversampling calculation.
2014-01-21 16:49:03 -05:00
whosawhatsis
f08bb8bb6a
Previous commit borked.
2014-01-19 22:06:45 -08:00
whosawhatsis
b1f8f492c6
Remove previous_millis_cmd update from extruder runout prevention code
...
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
2014-01-19 19:22:08 -08:00
whosawhatsis
8a5eaa3c9b
Fix crash after home bug
...
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
2014-01-19 19:11:51 -08:00
David Forrest
61a7256d42
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-17 17:00:47 -05:00
l.lefebvre
fdac8f6cec
Update ConfigurationStore.cpp
...
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458
Add Z Probe Offset to EEPROM and Ultra LCD
2014-01-16 18:13:46 -02:00
David Forrest
7216583b8b
createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin.
2014-01-16 12:40:15 -05:00
David Forrest
e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
2014-01-16 11:23:29 -05:00
David Forrest
75f39fadfc
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84})
2014-01-16 10:58:35 -05:00
daid
df194f75e1
Added PT100 support for Ultiboard2
2014-01-06 11:20:03 +01:00
daid
380144c20f
Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.
2014-01-06 11:05:02 +01:00
fsantini
6ae7f7870d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2013-12-23 12:20:32 +01:00
Phil Wise
17d6d965dc
Use C++ initialization list
...
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
2013-12-19 21:21:46 +00:00
Joseivaldo Benito Junior
ce8b9c4fc5
Correct missing parameter from last upmerge
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-19 00:50:44 -02:00
Joseivaldo Benito Junior
8e48e24c7f
Update Delta example files
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-18 00:04:36 -02:00
ErikZalm
46d2443c7d
Merge pull request #676 from IVI053/Marlin_v1
...
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
2013-12-17 02:28:28 -08:00
-
eed053dffb
Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs"
...
This reverts commit b7eadb9f37
.
2013-12-16 12:22:06 +01:00
Erik van der Zalm
8349fc89a4
Fixed planner bug
2013-12-16 11:40:23 +01:00
Francesco Santini
da2a6f9a31
Accurate bed leveling: x loop inside y and zigzag motion
2013-12-13 10:31:19 +01:00
RicardoGA
d29615dc0c
Z and Y dual stepper drivers error
...
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware
to solve this problem i change this line:
#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS
to:
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
2013-12-11 14:37:43 -06:00
fsantini
5bde7fcb28
Minor code and comment polishing
2013-12-11 21:27:43 +01:00
-
20faff5935
Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry
2013-12-08 21:35:57 +01:00
-
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
2013-12-08 21:34:56 +01:00
-
b7eadb9f37
Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs
2013-12-08 21:30:42 +01:00
Michal Dyntar
e8786bf110
Added support for Cheaptronic v1 electronic
2013-12-07 13:29:47 +01:00
fsantini
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
...
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
2013-12-06 21:46:25 +01:00
fsantini
b64661070e
Fixed the plane vector equation to a simpler one (only dependent on the normal)
...
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
2013-12-06 21:32:21 +01:00
Alex Borro
5c44f6c434
Bed Heater monitoring in Controller Fan
...
In some cases the Bed Heater FET heats up more then stepper drivers, so
this change add the bed monitoring to the controller fan. As soon as the
bed heater is turned on, the controller fan will run as well.
2013-11-27 23:23:06 -02:00
Alex Borro
b33375d438
Z Axis Safe Homing when using Z Probe
...
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
2013-11-27 22:37:35 -02:00
Alex Borro
35905ea4f9
Allow heaters to stay full On when PWM=127
...
In previous version, even with PWM = 127, the system turns the FET off
and then on in the next cycle. This bevavior may increase the FET heat
dissipation.
It was fixed keeping the FET always On when PWM=127.
2013-11-27 18:13:38 -02:00
Erik van der Zalm
a94e588765
Changed slow buttons behavior.
2013-11-17 17:41:30 +01:00
Erik van der Zalm
69af392554
Added HEATERS_PARALLEL (Request from reifsnyderb)
...
This allows a hot end with two heaters and a FET for each heater. This is useful if the FET is not capable of heating two heaters.
2013-11-17 13:29:02 +01:00
Erik van der Zalm
48a185d004
Fixed compile errors from bad commits.
2013-11-10 16:36:37 +01:00
ErikZalm
24d1f480b6
Merge pull request #647 from shaggythesheep/newfeature-M226
...
Implement M226 - GCode Initiated Pause
2013-11-10 07:27:01 -08:00
ErikZalm
95b41413e6
Merge pull request #641 from hugokernel/master
...
M80 - ATX Power On related modification
2013-11-10 07:26:35 -08:00
ErikZalm
59b96e323e
Merge pull request #640 from fmalpartida/SAV-MkI
...
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
2013-11-10 07:26:08 -08:00
ErikZalm
2433ee6fc8
Merge pull request #637 from justuswilhelm/Marlin_v1
...
Fix servo control for Melzi v2.0
2013-11-10 07:22:12 -08:00
ErikZalm
3455a2bac2
Merge pull request #636 from PrintToPeer/Marlin_v1
...
Add UUID support to M115 responses.
2013-11-10 07:21:46 -08:00
Richard Miles
dc887ef99b
Implement M226 - GCode Initiated Pause
...
Implemented M226 as described here:
http://reprap.org/wiki/G-code#M226:_Gcode_Initiated_Pause
Waits for pin to be become either HIGH, LOW or the inverse of what it
was before. Allows printing to pause until user interaction
2013-11-09 15:11:58 +00:00
Charles R
c244eb860c
If you have a switch on suicide pin, this is useful if you want to
...
start another print with suicide feature after a print without
suicide...
2013-11-04 12:04:04 +01:00
fmalpartida
7b556d2e96
Added BT support on AT90USB devices
...
Added AT90USB device BT connectivity support using second UART.
2013-11-03 19:57:06 +01:00
Kaz Walker
a5e8575829
Add UUID support to M115 responses.
2013-11-01 14:51:50 -06:00
Daniel Benamy
cab84e0e5b
Add (correct) missing pin definitions for Y2
...
I tested this and it works.
2013-10-30 22:44:20 -04:00
fmalpartida
5b3f60ea2e
Corrected LCD only error
...
If only an LCD is defined and no menu or keyboard defined, there is a
compilation error.
Added conditional compilation.
2013-10-30 21:52:46 +01:00
Justus Perlwitz
62d0b79023
Fix servo control for Melzi
2013-10-30 20:59:58 +01:00
fmalpartida
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
...
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
2013-10-30 11:45:32 +01:00
dumle29
f941203172
PS_ON configurable boot state
...
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
2013-10-29 18:44:56 +01:00
whosawhatsis
c79e3967b3
Make G11 not horribly broken
2013-10-24 18:58:42 -07:00
bkubicek
d69822ed51
Fix '#'
...
since it can occure in comments.
2013-10-22 10:34:51 +02:00
bkubicek
2fb2a0a119
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-10-22 10:08:21 +02:00
bkubicek
39d88bcccb
preparation for hibernation
...
If a print is stopped, it would be nice in the future to write a file with the printer state, the filename of the print, and the position within the print.
this file could be read, to continue a previously stopped print.
not finished yet.
2013-10-22 10:04:08 +02:00
bkubicek
ab965376ff
Sub-file calls.
...
by overloading M32 it is now possible to execute gcode files from other gcode files, with a fixed recursion level.
This can be used e.g. for having a real start.g and end.g somewhere on the sd card, which are then called from the normal print file.
Another usecase would be to have macro-files for nozzle-change and layerchange.
I have not tested the speedwise performance. The testing was done with pronterface.
syntax:
normal call from sd card will open the new file and continue executing there.
M32 !/path/filename#
this however will call the new file and return to the caller file.
M32 P !/path/filename#
with the optional "S<position>" the file starting position can be set.
this is for continuing prints from a previous location.
2013-10-22 10:02:18 +02:00
bkubicek
b2cc27e5ea
Added a magic character for sd buffering.
...
if a '#' is read now the buffer will be emptied before reading ahead.
This is so one can execute files from within gcode files, without messing the buffer with preread characters from the caller file.
# can not occure in sd files imho, because it should only occure within checksums in ther serial communication.
Yes, thats a lame argument. If you have a better idea please tell me. It has to be a character that one can type
on a keyboard manually.
2013-10-22 09:54:13 +02:00
Erik van der Zalm
8a08cca0f2
Added temperature status less.
...
Hopefully fixed viky button handling without braking other boards
2013-10-20 12:12:35 +02:00
Erik van der Zalm
667d278f54
Revert "Fix for Viki display"
...
This reverts commit 314fd13c39
.
2013-10-20 10:16:46 +02:00
Erik van der Zalm
bf27e79e74
Small BlinkM fix
2013-10-20 10:06:02 +02:00
Erik van der Zalm
87e28c0599
Added ifdefs to blinkm
2013-10-20 09:55:15 +02:00
Erik van der Zalm
24c6b2ab35
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-10-20 09:51:58 +02:00
ErikZalm
6a803ba9c5
Merge pull request #590 from timkoster/Marlin_v1
...
Added BlinkM support over i2c
2013-10-20 00:51:35 -07:00
Erik van der Zalm
457d8a0acb
Fixed merge conflicts
2013-10-20 09:50:27 +02:00
Alex Borro
6f85a8c7aa
Bed auto Leveling change: Raise Z before homing
...
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.
- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
2013-10-12 17:28:11 -03:00
Alex Borro
dd3086d3f2
Show Temperature ADC values
...
If "SHOW_TEMP_ADC_VALUES" is defined in Configuration_adv.h, the M105
command will present, after tradicional temperatures, the ADC value read
from temp sensors. This is great for adjusting thermistor tables with
thermocouple.
From Pronterface you can see the ADC value and compare with a
thermocouple reading.. then you just need to create your own thermistor
table.
Since this merge doesnt change the original information, it doesnt mess
with PC software parsing (tested under Pronterface and Repetier-Host).
2013-10-12 10:41:23 -03:00
bkubicek
7fad13a1e2
Reverse SD card file name order.
...
This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.
this should satisfy https://github.com/ErikZalm/Marlin/pull/373
as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.
2013-10-12 13:24:55 +02:00
bkubicek
b832f5b9f6
added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try.
...
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
2013-10-07 09:14:04 +02:00
bkubicek
c38b0855c8
I think that filament change is ready for the masses. I have tested very often with my ultimaker.
...
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
2013-10-06 21:20:26 +02:00
bkubicek
d147a057ac
Add the socalled "Babystepping" feature.
...
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *
It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.
Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.
say goodby to fuddling around with the z-axis.
2013-10-06 21:14:51 +02:00
Erik van der Zalm
bca353cc12
Fixed duplicate define in fastio.h
2013-10-03 19:24:53 +02:00
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
ErikZalm
1bda6bf862
Merge pull request #609 from phq1910/patch-1
...
Update Configuration.h
2013-09-26 11:47:58 -07:00
ErikZalm
c80aac1518
Merge pull request #610 from phq1910/patch-2
...
Update pins.h
2013-09-26 11:47:47 -07:00
Erik van der Zalm
314fd13c39
Fix for Viki display
2013-09-26 20:32:19 +02:00
phq1910
4f7c6dfe35
Update pins.h
...
Include Pins cpu Sethi 3D
2013-09-26 11:40:54 -03:00
phq1910
57173739a1
Update Configuration.h
...
Include CPU Sethi 3D
2013-09-26 11:29:44 -03:00
Erik van der Zalm
0dca49a7c0
Added Azteeg X3 board.
2013-09-24 17:31:16 +02:00
Erik van der Zalm
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
2013-09-23 23:29:46 +02:00
Erik van der Zalm
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
2013-09-23 23:25:11 +02:00
Erik van der Zalm
3ca1ca6869
Fixed missing ENCODER_PULSES_PER_STEP
2013-09-23 23:18:35 +02:00
Tim Koster
97b0da0c2e
Removed #ifndef BLINKM
2013-09-22 10:43:27 +03:00
Tim Koster
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
2013-09-20 10:57:42 +03:00
Richard Miles
77df2ab0e7
Make Y_DUAL_STEPPER_DRIVERS disabled by default
2013-09-17 21:49:44 +01:00
Richard Miles
ed1ab42186
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:19:20 +01:00
Richard Miles
f4a59e4ce5
Revert "Added Y_DUAL_STEPPER_DRIVERS"
...
This reverts commit 7ee275b620
.
2013-09-17 19:05:49 +01:00
Richard Miles
7ee275b620
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:02:00 +01:00
ErikZalm
6a1e980c6d
Merge pull request #600 from xoan/Encoder_Pulses_Per_Step
...
add ENCODER_PULSES_PER_STEP
2013-09-14 04:56:45 -07:00
ErikZalm
20076a8bd3
Merge pull request #598 from GDV0/Marlin_v1
...
FIx compilation error when enabling SERVO_ENDSTOPS (#591 )
2013-09-14 04:54:19 -07:00