ErikZalm
1520de0093
Merge pull request #505 from MStohn/much-faster-glcd-st7920
...
faster GLCD (ST7920 SW-SPI) implementation / fixes
2013-06-05 08:40:59 -07:00
Maik Stohn
da05b3ba94
faster GLCD (ST7920 SW-SPI) implementation / fixes
...
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
2013-06-05 16:27:44 +02:00
kiyoshigawa
4b19c8552e
Fixing changed Configuration.h settings to be default values per ErikZalm Request.
2013-06-04 12:01:55 -06:00
Erik van der Zalm
971ec35135
Expanded M302 to allow setting the temp
2013-06-02 17:36:23 +02:00
Erik van der Zalm
4de419e26e
Updated README.md
2013-06-02 16:26:42 +02:00
Erik van der Zalm
a0729f0c3a
no message
2013-06-02 15:42:59 +02:00
Erik van der Zalm
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
2013-05-29 19:29:30 +02:00
Guillaume Seguin
16b9239a26
Report temperatures for all extruders
2013-05-29 18:06:12 +02:00
ErikZalm
a964b3cf3d
Merge pull request #495 from Gatulibu/Marlin_v1
...
Added support for Megatronics v2.0 and Minitronics v1.0
2013-05-28 07:51:49 -07:00
ErikZalm
34fb4831a2
Merge pull request #496 from MStohn/fix-16x2-lcd
...
Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation
2013-05-28 07:50:52 -07:00
Maik Stohn
e8572c5239
Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation
2013-05-28 15:53:07 +02:00
Maik Stohn
7ee70c2248
Fix: removed wrong ; at end of define
2013-05-28 15:50:48 +02:00
Gatulibu
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
...
merged from code downloaded from reprapworld.com
2013-05-28 14:03:31 +02:00
Erik van der Zalm
9be61cdc02
Added redundant temp sensor
2013-05-26 17:57:49 +02:00
Erik van der Zalm
7231a20dba
Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42.
2013-05-24 21:05:11 +02:00
ErikZalm
7296de34cb
Merge pull request #491 from stoneburner/patch-1
...
Fixed typo in Comment
2013-05-22 06:10:25 -07:00
Alexander Kasimir
e2ff536b03
Fixed typo in Comment
2013-05-22 16:02:03 +03:00
ErikZalm
df776f36a4
Merge pull request #490 from buildrob101/Marlin_v1
...
Revert previous change pin check change
2013-05-22 05:37:25 -07:00
Robert F-C
40eb07bad4
Revert and extend previous change pin check change
...
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
2013-05-22 21:33:23 +10:00
ErikZalm
440cf2bc10
Merge pull request #488 from MStohn/fix-typo
...
fixed typo / added "const" to defines for newer gcc compatibility
2013-05-21 09:36:14 -07:00
Maik Stohn
bd33cf4a9f
fixed typo / added "const" to defines for newer gcc compatibility
2013-05-21 17:58:34 +02:00
ErikZalm
567291e734
Merge pull request #485 from Banjer/Panelolu2_Melzi
...
Add Panelolu2 support for Melzi
2013-05-21 08:46:27 -07:00
ErikZalm
68f9f2521e
Merge pull request #487 from MStohn/fix-bad-lcd-commit-from-buildrob
...
fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementati...
2013-05-21 08:17:21 -07:00
Maik Stohn
8d80cbbf4c
fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored
2013-05-21 16:53:38 +02:00
ErikZalm
273502a172
Merge pull request #486 from xifle/Marlin_v1
...
LCD: Added Deadzone at 100% Feedrate
2013-05-20 08:09:51 -07:00
xifle
98d0d48191
fixed merge
2013-05-20 14:52:35 +02:00
xifle
bbe67fca5a
soft tab correction
2013-05-20 14:50:39 +02:00
xifle
9eeb711c96
Merged from Upstream Master
2013-05-20 14:45:37 +02:00
Bas Spaans
424101110c
Add Panelolu2 support for Melzi
2013-05-19 12:09:34 +02:00
ErikZalm
b2eeebd9c3
Merge pull request #409 from buildrob202/Marlin_v1
...
Implement automatic cold-end/extruder motor fan control based on nozzle temperature
2013-05-19 02:10:33 -07:00
Robert F-C
0d4a9444c4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-19 08:50:58 +10:00
Erik van der Zalm
86cce025f4
Added #ifdef NUM_SERVOS to servo.cpp
2013-05-18 23:12:28 +02:00
ErikZalm
1a18a487f9
Merge pull request #407 from buildrob101/Marlin_v1
...
Combine and converge other I2C LCD branches (PANELOLU2, VIKI & PCF8575)
2013-05-18 11:28:32 -07:00
xifle
03141a5ef4
LCD: Added Deadzone at 100% Feedrate
...
This adds a deadzone at 100% Feedrate when changing it at the status
screen/main menu. Prevents from unwanted feedrate-changing when
navigating back to the main menu and makes it easier to return to 100%.
2013-05-18 19:53:46 +02:00
Gord Christmas
28ada096e2
Adding servo documentation
2013-05-18 06:01:58 -07:00
Robert F-C
4121311b9d
Change to LCD status indicators
...
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
2013-05-18 22:30:42 +10:00
Robert F-C
dfa549f268
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad
Merge pull request #482 from codexmas/Marlin_v1
...
servosupport
2013-05-16 10:19:00 -07:00
ErikZalm
86405cdd11
Merge pull request #479 from MStohn/thermocouple
...
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
2013-05-16 10:06:59 -07:00
Erik van der Zalm
6c45c3f4e7
BariCUDA changes
2013-05-16 19:01:12 +02:00
Gord Christmas
96624f0f31
Forgot to include reference to Servo in makefile
2013-05-16 08:25:20 -07:00
Gord Christmas
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
2013-05-16 07:03:01 -07:00
Gord Christmas
b668cb0516
Adding in clean copies of Servo library from Arduino 1.0.4
2013-05-16 06:47:42 -07:00
MaikStohn
95dff34b73
fixed wrong compare for min temp check of heater 1 and heater 2
2013-05-16 01:17:38 +02:00
MaikStohn
4cc6f9f6de
fixed wrong pin initialization when using temperature 2 pin input
2013-05-16 01:17:08 +02:00
MaikStohn
61a48cc662
Add support for RUMBA thermocouple add on
2013-05-16 01:16:33 +02:00
MaikStohn
9cc15876be
Add support for RUMBA thermocouple add on
2013-05-16 01:16:08 +02:00
ErikZalm
c9cf2174dd
Merge pull request #474 from xifle/Marlin_v1
...
Fixed "Cooldown" Selection not reseting bed temp
2013-05-14 14:58:53 -07:00
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
2013-05-14 23:56:32 +02:00
Jordan Miller
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
2013-05-14 23:35:01 +02:00
