Commit graph

32 commits

Author SHA1 Message Date
Bernhard 1d06b10962 Added a feature to have filament change by gcode or display trigger.
[default off for now]
syntax: M600  X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]

if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.

You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
2013-01-27 13:21:34 +01:00
daid303 0f3f5d083d Minor cleanup of the new FAN_KICKSTART code. #334 2013-01-10 11:08:45 +01:00
Kevin O'Connor 3d91bd486c Add "kick fan" feature - briefly run fan at full speed on start.
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan.  Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power.  However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
daid 27843388c6 Merge pull request #360 from njprossi/Marlin_v1
Power signal control definitions for other power supplies
2013-01-08 02:58:02 -08:00
daid303 921273baa0 Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit. 2013-01-08 11:53:18 +01:00
Nicolas Rossi f3c1fc70a9 Power signal control definitions for ATX and others 2013-01-07 14:33:30 +01:00
Johann Rocholl 1f45cb0a51 Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. 2012-12-11 01:54:40 -08:00
daid303 587154c01b Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 2012-12-06 10:36:07 +01:00
Erik vd Zalm f934d0ef5b Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
2012-11-21 20:36:30 +01:00
daid303 f6ff0ab767 signed/unsigned fixes. 2012-11-06 15:33:49 +01:00
daid303 b6ff45254e Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog. 2012-11-06 13:33:00 +01:00
daid303 7e348fcb5f By mistake enabled the watchdog by default. This should be off by default. 2012-11-06 13:20:08 +01:00
daid303 06b58a9c4f First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
ErikZalm 36a746d7d5 Merge pull request #244 from markfinn/pidbed
PID for heated bed
2012-10-08 11:15:16 -07:00
Mark Finn 04631d2250 cleanup for pull 2012-09-17 14:17:24 -05:00
ZetaPhoenix c6caa45ae2 Limit Switch locations based on MIN/MAX limits and homing direction
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
tonokip 1c1fddc7ac Added support for the Rambo reprap electronics board. Added Mcodes to set
motor current and microstepping pins.
2012-08-30 00:16:57 -07:00
Enchiridion 50cde90324 Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
daid 12de8fff81 Support step motor controllers with active low step pins. 2012-06-29 16:27:47 +02:00
Bernhard 0c123950e9 __ header file replace 2012-06-02 20:44:17 +02:00
Bernhard bf077125b9 added firmware retract. disabled by default 2012-06-02 20:32:28 +02:00
Erik van der Zalm 67cf105bc6 Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
2012-04-15 19:17:33 +02:00
Erik van der Zalm 4ca2f336f0 Changed default MINIMUM_PLANNER_SPEED -> 0.05
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
2012-04-01 16:23:40 +02:00
Bernhard 1532200435 found error in filenames.
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
2012-03-19 20:06:58 +01:00
Erik van der Zalm 87ff2f8867 Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers) 2012-03-11 10:44:10 +01:00
Erik van der Zalm c6f2ec3c82 remove stop_heating_wait 2012-02-27 18:45:45 +01:00
Erik van der Zalm 018c567abf Moved SLOWDOWN function. (jetty840)
Included AD595 calibration options. (daid)
2012-02-26 16:23:47 +01:00
Blair Thompson d9f2f509d5 Added new menu items under the prepare submenu.
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
2012-02-22 22:51:04 +00:00
Erik van der Zalm 8816ef1c64 Small fixes after merge 2012-02-21 20:36:43 +01:00
Erik van der Zalm 13e185d330 removed unused HEATING_EARLY_FINISH_DEG_OFFSET
Simplified stepper inactive time
2012-02-11 23:22:16 +01:00
Erik van der Zalm 5113513cb2 RC 1 2012-02-08 18:28:54 +01:00
Erik van der Zalm d8a0c6450f Split the configuration file in two parts.
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00