Commit graph

7466 commits

Author SHA1 Message Date
Scott Lahteine
3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
GMagician
a61127a421 [2.0.x] tool change bad behaviours
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab Update pins_RURAMPS4D.h
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8 Update Temperature::setPwmFrequency prototype to match source
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb Fixes #8472 2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
[2.0] No retroactive adjustment with M851 Z
2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3 No retroactive changes with M851 Z
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9 Remove obsolete show_bootscreen var 2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7 Updates to Anet A8 configurations
Based on #8426
2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b E0 auto fan fixes 2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7 Fix a planner comment 2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083 Fix M503 output for M145
Fixes #7978
2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e Add OV() macro for use in thermistor tables 2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
[2.0.x] Fix Software Fan PWM
2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
[2.0] Fix 'M32 P' subroutines
2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
RowanMeara
6131533157 Change dithering behavior to intended. 2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27 Drop unused LARGE_FLASH option 2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00