Commit graph

260 commits

Author SHA1 Message Date
AnHardt
722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
2015-06-22 22:31:48 -04:00
Scott Lahteine
a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
2015-06-15 20:20:31 -05:00
AnHardt
6ab7b560af Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
2015-06-15 06:13:26 -05:00
Scott Lahteine
90f858aa85 Use translated strings for axis movement (PR#2280)
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
2015-06-14 08:16:00 -05:00
wurstnase
e7e964432b consistency name for multiplier
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
2015-06-01 22:33:22 +02:00
AnHardt
f18f689c01 Replace MSG_F? with MSG_N?
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
2015-05-28 20:30:23 +02:00
AnHardt
bc0764894a Shift call of start_watching_heater() into setTargetHotend()
to warrant watching is set or reset.

Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
2015-05-21 20:36:11 +02:00
Ed Boston
ca8d1756d5 Define fixes
Fixed a couple defines that were not changed or commented out.
2015-05-18 14:23:31 -07:00
Ed Boston
a83bf18ee1 More functional seperation
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
2015-05-18 05:37:46 -07:00
Ed Boston
047e688e93 Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER
Rename of define to avoid confusion between the controller and the
display which had similar names.
2015-05-17 15:23:17 -07:00
Ed Boston
41f8cdb3a6 ADAFRUIT_ST7565
Added support for new display type
2015-05-17 12:47:41 -07:00
Scott Lahteine
fcfd99c1ae Add comments to lcd_control_temperature_menu 2015-05-12 18:46:16 -07:00
Scott Lahteine
9b3d4380d3 Only watch the heater that was set 2015-05-10 20:26:45 -07:00
Scott Lahteine
54deb9eea3 Enable WATCH_TEMP_PERIOD by default 2015-05-08 22:36:02 -07:00
brupje
8f8bf3a897 Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented 2015-05-05 11:03:20 +02:00
Scott Lahteine
d4c74b8f8c Don't apply M428 if an error occurs
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
2015-04-29 19:05:48 -07:00
Scott Lahteine
d065d37822 Add M428 to set home_offset logically 2015-04-29 18:26:16 -07:00
Scott Lahteine
0f687b5dda Merge branch 'Development' into eeprom_in_gcode
Latest upstream commits
2015-04-27 21:47:47 -07:00
Scott Lahteine
5b248757c7 Level Bed in Prepare submenu
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
2015-04-27 19:11:25 -07:00
Scott Lahteine
0fca084ea6 Make EEPROM reproducible in GCode
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.

- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
2015-04-26 20:56:33 -07:00
Scott Lahteine
a22a228bcc Rename files to move them in the IDE 2015-04-25 21:04:54 -07:00
Scott Lahteine
a932e7490f No noTone needed, but delay is 2015-04-25 03:25:30 -07:00
Scott Lahteine
9c5d14ea68 Fix BEEPER duration 2015-04-25 03:12:49 -07:00
Scott Lahteine
c92b59952a Use millis_t for progress_bar_ms and expire_status_ms 2015-04-24 22:16:09 -07:00
Scott Lahteine
97dfa0365d Rename expireStatusMillis to expire_status_ms 2015-04-24 21:51:10 -07:00
Scott Lahteine
ce142afdda G4 shows status message only if no message is set already
- Address issue raised in #1961
2015-04-24 20:13:01 -07:00
Scott Lahteine
2558c10c6c Use the slower feedrate for XY axes 2015-04-23 20:06:17 -07:00
Scott Lahteine
31932912dd Use AxisEnum instead of int for _lcd_move 2015-04-23 19:32:37 -07:00
Scott Lahteine
c3560e0288 Include axis parameter to ultralcd's line_to_current 2015-04-23 19:10:09 -07:00
Scott Lahteine
3b97a7d446 Merge pull request #1944 from AnHardt/beep2
More Beeper clean up
2015-04-23 17:50:02 -07:00
AnHardt
f2c94b3298 tone will end automaticly 2015-04-22 01:49:55 +02:00
AnHardt
064f2b37d0 More Beeper clean up.
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().

Enforced max. duration for M300 to 5 seconds.

Corrected description in 'Configuration.h'

LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
2015-04-20 11:11:13 +02:00
Scott Lahteine
09d60e0128 Naming and code comments 2015-04-13 17:17:36 -07:00
Scott Lahteine
ccddc280be Apply three more commits 2015-04-12 22:47:44 -07:00
Scott Lahteine
055b11814a Additional cleanup of ultralcd.cpp 2015-04-11 04:56:08 -07:00
Scott Lahteine
388dd0cfa5 Fix doubled lcd_quick_feedback
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
2015-04-11 04:45:04 -07:00
Scott Lahteine
740152ee70 Merge branch 'Development' into cold_extrude
Latest upstream commits
2015-04-09 20:23:47 -07:00
Scott Lahteine
5914d9d7de Shuffling declarations.. 2015-04-09 20:21:30 -07:00
Scott Lahteine
b328c6e6b6 Shuffling declarations. 2015-04-09 20:05:10 -07:00
Scott Lahteine
fb4cefc91d Define lcd_move_[xyz] ahead of lcd_move_menu_axis 2015-04-09 19:33:16 -07:00
Scott Lahteine
9189cc66ab Fix moves for DELTA for MANUAL_BED_LEVELING
- Use `line_to_current` in place of `plan_buffer_line`
2015-04-09 04:32:14 -07:00
AnHardt
df50523605 Made encoderPosition and quick_feedback dependant on NEWPANEL
where the hardware is available.
Fix for #1873
2015-04-09 12:26:45 +02:00
AnHardt
bcc04192fc Remove Contrast Menu for U8GLIB_ST7920
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
2015-04-08 12:56:38 +02:00
Scott Lahteine
7431ef7e2d Merge branch 'Development' into dev_version
Latest upstream commits
2015-04-07 21:14:00 -07:00
Scott Lahteine
43773ff735 Formatting and lcd contrast masking 2015-04-07 21:11:03 -07:00
Scott Lahteine
cf9b58452c Minimum delay in menu click feedback
Squished #1849
2015-04-07 20:20:30 -07:00
Edward Patel
002340f32c Merge branch 'Development-Marlin' into Development 2015-04-07 22:49:12 +02:00
AnHardt
ac843fbf3b Fix lcd_status_message
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
2015-04-07 02:33:34 +02:00
Edward Patel
0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406 Merge branch 'Development-Marlin' into Development
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
2015-04-05 04:06:02 +02:00