Robert F-C
40eb07bad4
Revert and extend previous change pin check change
...
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
2013-05-22 21:33:23 +10:00
Maik Stohn
bd33cf4a9f
fixed typo / added "const" to defines for newer gcc compatibility
2013-05-21 17:58:34 +02:00
ErikZalm
567291e734
Merge pull request #485 from Banjer/Panelolu2_Melzi
...
Add Panelolu2 support for Melzi
2013-05-21 08:46:27 -07:00
Maik Stohn
8d80cbbf4c
fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored
2013-05-21 16:53:38 +02:00
xifle
98d0d48191
fixed merge
2013-05-20 14:52:35 +02:00
xifle
bbe67fca5a
soft tab correction
2013-05-20 14:50:39 +02:00
xifle
9eeb711c96
Merged from Upstream Master
2013-05-20 14:45:37 +02:00
Bas Spaans
424101110c
Add Panelolu2 support for Melzi
2013-05-19 12:09:34 +02:00
Robert F-C
0d4a9444c4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-19 08:50:58 +10:00
Erik van der Zalm
86cce025f4
Added #ifdef NUM_SERVOS to servo.cpp
2013-05-18 23:12:28 +02:00
xifle
03141a5ef4
LCD: Added Deadzone at 100% Feedrate
...
This adds a deadzone at 100% Feedrate when changing it at the status
screen/main menu. Prevents from unwanted feedrate-changing when
navigating back to the main menu and makes it easier to return to 100%.
2013-05-18 19:53:46 +02:00
Gord Christmas
28ada096e2
Adding servo documentation
2013-05-18 06:01:58 -07:00
Robert F-C
4121311b9d
Change to LCD status indicators
...
The I2C LCD status indicators now indicate when the hotends or bed are
turned on at all (rather than just when they are in their heating phase)
2013-05-18 22:30:42 +10:00
Robert F-C
dfa549f268
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad
Merge pull request #482 from codexmas/Marlin_v1
...
servosupport
2013-05-16 10:19:00 -07:00
ErikZalm
86405cdd11
Merge pull request #479 from MStohn/thermocouple
...
BUGFIXES for temperature.cpp / add RUMBA thermocouple support
2013-05-16 10:06:59 -07:00
Erik van der Zalm
6c45c3f4e7
BariCUDA changes
2013-05-16 19:01:12 +02:00
Gord Christmas
96624f0f31
Forgot to include reference to Servo in makefile
2013-05-16 08:25:20 -07:00
Gord Christmas
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
2013-05-16 07:03:01 -07:00
Gord Christmas
b668cb0516
Adding in clean copies of Servo library from Arduino 1.0.4
2013-05-16 06:47:42 -07:00
MaikStohn
95dff34b73
fixed wrong compare for min temp check of heater 1 and heater 2
2013-05-16 01:17:38 +02:00
MaikStohn
4cc6f9f6de
fixed wrong pin initialization when using temperature 2 pin input
2013-05-16 01:17:08 +02:00
MaikStohn
61a48cc662
Add support for RUMBA thermocouple add on
2013-05-16 01:16:33 +02:00
MaikStohn
9cc15876be
Add support for RUMBA thermocouple add on
2013-05-16 01:16:08 +02:00
ErikZalm
c9cf2174dd
Merge pull request #474 from xifle/Marlin_v1
...
Fixed "Cooldown" Selection not reseting bed temp
2013-05-14 14:58:53 -07:00
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
2013-05-14 23:56:32 +02:00
Jordan Miller
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
2013-05-14 23:35:01 +02:00
Jordan Miller
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
2013-05-14 23:34:45 +02:00
xifle
29bb8d7d4f
Fixed "Cooldown" Selection not reseting bed temp
...
- enquecommand with multiple lines "\n" doesn't work -> M140 S0 didn't
get processed. So I wrote a new func for the cooldown which uses
setTargetHotend. In addition this does return to status page after
selection.
- Added setWatch() to preheat-functions (Temperatur sanity check
would never have worked when preheating from the lcd panel)
2013-05-14 16:56:19 +02:00
Robert F-C
015d0594b0
Optimize menu selection for Viki rotary encoder.
...
The Viki LCD rotary encoder uses a different number of steps per
rotation. This fixes the seeming "missed" steps when selecting a menu.
2013-05-12 07:51:28 +10:00
gregor
2739c26c4f
changes:
...
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
2013-05-10 22:20:02 +02:00
gregor
6fb9573157
added support for the reprapworld keypad
2013-05-10 21:57:17 +02:00
Tim Anderson
594193c908
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-05-06 23:29:38 -06:00
Tim Anderson
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
2013-05-06 23:23:54 -06:00
kiyoshigawa
b27a59f41e
Added support for Elefu RA Board and Elefu Control Panel
2013-05-06 08:44:38 -06:00
midopple
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
2013-05-05 19:23:59 +02:00
midopple
db2f157a22
Replace the <= to < in the Command M907, M350 and M351.
...
The for loop for Axis count over the Array.
Add a break after M907
2013-05-05 19:19:55 +02:00
Scott Lahteine
a5cd582665
Support for 10 level deep SD folder hierarchy
2013-05-04 04:18:02 -07:00
Arnoud
fc4ab05157
Solved minor bug in controllerFan()
...
Extruder 2 was checked where extruder 1 should be checked.
2013-05-03 21:32:34 +02:00
Scott Lahteine
0ef54f2f85
Make M303 silent when "S0" is sent
...
If S is left out perhaps it should be silent, but check the spec for
this M code.
2013-05-02 09:55:15 -07:00
Scott Lahteine
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
2013-05-02 09:22:58 -07:00
Martin Renold
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
2013-05-01 08:30:24 +02:00
Robert F-C
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
2013-04-30 01:11:23 +10:00
Robert F-C
d5ad7a0814
Rework change to incorporate CONTROLLERFAN
...
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
2013-04-30 01:08:29 +10:00
Robert F-C
c3cdaceab3
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-04-29 22:13:55 +10:00
Robert F-C
1c127217df
Make DOGLCD merge neater.
2013-04-29 22:03:37 +10:00
Robert F-C
7f57f28ccc
Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer.
...
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
2013-04-29 21:50:52 +10:00
Robert F-C
788d62bcc4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz
d71f1e9bf6
Add (as an option) slower SD transfer mode
2013-04-24 10:50:57 +02:00
ErikZalm
db5bb8546d
Merge pull request #452 from MStohn/Marlin_v1
...
128x64 RepRapDiscount Full Graphic Smart Controller support
2013-04-23 09:43:37 -07:00
daid
4b2ece159b
Merge pull request #453 from brackendawson/Marlin_v1
...
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
2013-04-16 10:12:25 -07:00
Bracken Dawson
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
2013-04-16 17:37:38 +01:00
MaikStohn
7ac6d7f78e
FIX: Speedup - no explicit display clear needed in u8glib
2013-04-16 14:22:24 +02:00
MaikStohn
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
2013-04-16 14:21:39 +02:00
MaikStohn
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
2013-04-16 13:54:39 +02:00
MaikStohn
16afbf9bfa
FIX: adopted latest changes from hitachi implementation
2013-04-16 13:51:48 +02:00
daid303
34bca48b98
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2013-04-15 15:11:38 +02:00
daid303
ac52dcc174
Updated the card menu and watch messages to make it more informative.
2013-04-15 15:11:22 +02:00
Stefanowicz
31bb3fb297
Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined
2013-04-12 18:04:32 +02:00
daid303
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
2013-04-12 13:54:38 +02:00
Simon Oliver
5d5909fc25
Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().
2013-04-12 13:32:47 +02:00
Simon Oliver
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
...
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
2013-04-12 13:31:30 +02:00
Bart K
4fa2260a59
Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)
2013-03-31 19:59:16 -04:00
Erik van der Zalm
038d405254
Corrected #endif in language.h
2013-03-31 20:28:29 +02:00
Dirk Eichel
443aaa30bf
Removed GIT fragments
...
Seems that there was something wrong while merging
2013-03-30 23:26:42 +01:00
ErikZalm
7f622467fc
Merge pull request #425 from kefir-/m928_logging
...
M928 logging
2013-03-30 08:50:34 -07:00
ErikZalm
86867928ac
Merge pull request #434 from DDRBoxman/Marlin_v1
...
Add support for M300: Play beep sound
2013-03-30 08:49:54 -07:00
ErikZalm
9a38cad6f0
Merge pull request #430 from STB3/GLCD_128x64_dots
...
Final task of the 128x64dots GLCD implementation
2013-03-30 08:49:14 -07:00
ErikZalm
7a5c474d91
Update Configuration.h
2013-03-28 21:27:50 +01:00
Dirk Eichel
4e448b700a
Merged fetched files from Marlin_v1 branch
...
Pull requests: #414 #433 #432 #428
2013-03-26 21:43:04 +01:00
ErikZalm
9f2862ce48
Merge pull request #414 from whosawhatsis/Marlin_v1
...
regenerated thermistor table 7
2013-03-25 13:14:49 -07:00
ErikZalm
9fb8bd5685
Merge pull request #433 from whosawhatsis/bang-mode
...
Separate PID_MAX from BANG_MAX
2013-03-25 13:11:34 -07:00
Colin Edwards
0d075378d5
Add LARGE_FLASH define and enable it for some of the beefier boards
...
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
2013-03-25 10:42:27 -05:00
Colin Edwards
9a1c90471f
Ignore unused beeper pins
2013-03-25 10:28:15 -05:00
Colin Edwards
1a0f889803
Add support for M300: Play beep sound
2013-03-24 23:35:05 -05:00
Robert F-C
9322c408c6
Updated for LiquidTWI2 library version 1.2.3
...
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
2013-03-24 18:19:58 +11:00
whosawhatsis
fd5b7e0cec
Separate PID_MAX from BANG_MAX
...
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
2013-03-22 18:16:26 -07:00
blddk
e5a853a3d0
Added automated extruder fan function
2013-03-22 18:49:05 +01:00
blddk
72419f69a9
Added rumba
2013-03-22 18:41:54 +01:00
blddk
91bea43332
Added rumba pinout
2013-03-22 18:29:47 +01:00
blddk
d2b00fe486
Removed html and added rumba
...
Found some unwanted html at the bottom of the file which caused it to not be able to compile.
Also added rumba as machine.
2013-03-22 18:28:16 +01:00
Dirk Eichel
6c66cae694
GLCD init screen cosmetics
2013-03-19 21:25:11 +01:00
Dirk Eichel
f3e0e5184d
Add include selector between char. LCD and GLCD
2013-03-19 20:59:21 +01:00
Dirk Eichel
5d3862f9d1
Modified u8glib logo on welcome screen
2013-03-19 20:32:23 +01:00
Dirk Eichel
0b320f75e9
Removed debug code, add some comments
2013-03-19 20:29:25 +01:00
Dirk Eichel
5f1cd70122
Add code to lcd_update() for GLCD
...
This code selects between the routines for the GLCD or the char.
display.
2013-03-19 20:19:16 +01:00
Dirk Eichel
a49c09a776
Add variable for animated fan, add float conversion w/o sign
...
A new variable was introduced to allow fan animation on the GLCD.
Add additional float to string conversion routine without sign
character. This is used for the coordinates visualisation on the GLCD.
2013-03-19 20:13:23 +01:00
Dirk Eichel
26d8863111
Add library selection between GLCD and char. LCD
2013-03-19 20:03:47 +01:00
Dirk Eichel
4a141a694f
Marlin code for GLCD display
...
This contains the menues, status screen etc...
2013-03-19 19:59:56 +01:00
Dirk Eichel
83c790a020
Add bitmap graphics for GLCD
...
1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Dirk Eichel
233df9cca0
Add missing LF at the end of the file
2013-03-19 19:12:33 +01:00
Dirk Eichel
bb0de75a92
Removed umwanted HTML code ath the end of the file
...
Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.
2013-03-19 06:46:05 +01:00
Ryan Turner
7c47e7162d
Adding Maker's Tool Works heated bed thermistor
2013-03-18 22:53:37 -05:00
daid
af78d0cbfa
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
2013-03-18 23:36:11 +01:00
Dirk Eichel
9a78f321a4
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
2013-03-18 23:36:11 +01:00
Dirk Eichel
5de25ccd20
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
2013-03-18 23:36:10 +01:00
daid
d6ce63c49c
Merge pull request #411 from STB3/Marlin_w_STB_Board_support
...
Add STB board support to Marlin (next step towards graphic LCD implementation)
2013-03-18 07:57:39 -07:00
Ketil Froyn
f036be7c4e
Clean up tab/whitespace from last commit
2013-03-16 23:11:58 +01:00
Ketil Froyn
07e11c7cf5
Add command M928 to enable logging to file of received gcode commands
2013-03-16 23:02:57 +01:00
daid
92782f9252
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
2013-03-15 09:07:34 +01:00
whosawhatsis
6a61a3c0b4
missing comma in last commit
2013-03-08 16:15:49 -08:00
whosawhatsis
f0aee4101a
regenerated thermistor table 7
...
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
2013-03-08 13:41:49 -08:00
Nicolas Rossi
aba67e2449
No bed config for RAMPS
...
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
2013-03-05 15:51:24 +01:00
Nicolas Rossi
6504e96165
Turn off power supply off-load
...
Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.
2013-03-05 15:03:48 +01:00
Nicolas Rossi
86bf911139
Toggle menu for PSU from LCD pannel
...
From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.
2013-03-05 14:52:51 +01:00
Robert F-C
7bad72359c
Support encoder click on PANELOLU2 being read through I2C
...
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
2013-03-03 18:47:50 +11:00
Robert F-C
1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
2013-03-02 16:14:19 +11:00
Robert F-C
f1263d3f88
Further reduce code by using precompiler logic
2013-03-02 16:12:11 +11:00
Dirk Eichel
140e095c6e
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
2013-03-01 17:47:32 +01:00
Dirk Eichel
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
2013-03-01 17:39:54 +01:00
Dirk Eichel
ceb5ee38af
Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin
2013-03-01 17:27:57 +01:00
Dirk Eichel
8efd4cfd73
fixed merge conflict
2013-03-01 16:27:35 +01:00
Robert F-C
372e12f83f
Implement automatic extruder/cold-end fan control based on temperature
...
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
2013-03-01 21:57:23 +11:00
Robert F-C
6beb42cdf6
Attempt to address Bernhard's comments
...
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
2013-03-01 01:17:07 +11:00
Robert F-C
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
...
Also fix compile time check in Marlin.pde
2013-02-28 02:32:20 +11:00
Robert F-C
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
...
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
2013-02-28 02:04:51 +11:00
daid303
4eb81a69e6
Only compile the new extruder offset code if you have multiple extruders.
2013-02-27 12:32:07 +01:00
daid
3e9cd334a4
Merge pull request #383 from dob71/jeff
...
Hotend offset handling for multi-extruder machines
2013-02-27 03:10:18 -08:00
MendelMax
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
...
Removed incorrect LiquidCrystal_I2C Library
2013-02-26 22:22:12 +00:00
Bob Clough
b6209c86dd
Added import of Wire Library to make I2C LCD support compilable
2013-02-25 15:15:23 +00:00
Bob Clough
2b567d1df5
Added I2C port expander support to HD44780
2013-02-25 14:22:14 +00:00
Bob Clough
06272f463d
Added Config variables for activating I2C LCDs and setting type and address
2013-02-25 14:14:46 +00:00
daid303
de3dec7215
Also show the tune menu when USB printing.
2013-02-20 00:54:44 +01:00
Denis Bakin
73d41c10b9
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
...
Conflicts:
Marlin/language.h
Marlin/thermistortables.h
2013-02-18 12:10:52 -05:00
daid
63da4dc59a
Merge pull request #398 from DanieleSdei/Marlin_v1
...
Marlin v1, alignment of the Italian language
2013-02-16 15:41:43 -08:00
Daniele Sdei
82e28851bd
Italian language: SD-Card change and SD-Card init
2013-02-16 12:17:29 +01:00
Daniele Sdei
aed5965ad8
Italian language: remove space and some fix
2013-02-16 12:14:50 +01:00
codenamepawel
d360846dd4
Update Marlin/language.h
...
Update Polish language #define MSG_RESUMING "Wznawiam drukowanie"
2013-02-16 03:42:53 +01:00
daid303
2f60e324dc
Fixed #394
2013-02-14 14:04:26 +01:00
daid
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
...
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
2013-02-13 08:56:00 -08:00
Dirk Eichel
a0d4e8e78e
Add Messages for SD Card init. & change
2013-02-13 10:05:18 +01:00
mfeherpataky
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
2013-02-12 20:06:51 +01:00
Dirk Eichel
c8f1fbd9d8
Add SD-Card change and SD-Card init.
...
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
2013-02-12 17:35:46 +01:00
mfeherpataky
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
2013-02-12 00:03:40 +01:00
mfeherpataky
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
2013-02-11 23:25:24 +01:00
Denis B
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
Denis B
49b2ddc8c1
Cleaned up non-standard characters
2013-02-04 01:41:40 -05:00
Bernhard Kubicek
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
2013-02-03 03:05:31 -08:00
daid
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
2013-02-02 03:23:43 -08:00
Bas Spaans
19ce90fe02
Added comment about M42 usage (clean)
2013-01-31 18:20:23 +01:00
Bas Spaans
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
.
2013-01-31 18:11:13 +01:00
Marius Kintel
e06d820909
Also skip .files and _files with long filenames
2013-01-31 12:07:42 -05:00
Bas Spaans
01541ee64c
Extended comment explaining M42 usage
2013-01-31 18:00:25 +01:00
Marius Kintel
f24f02e212
compile fix: quickStop() needs stepper.h
2013-01-31 10:43:03 -05:00
Bas Spaans
12c41423ad
Fixed typo in comment
2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
2013-01-30 22:25:01 +01:00
Bernhard
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
2013-01-27 13:21:34 +01:00
daid303
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
2013-01-21 15:46:17 +01:00
Daniele Sdei
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
2013-01-14 15:47:40 +01:00
Daniele Sdei
3cf59f6f9a
add RepRapPro Huxley thermistor tables
2013-01-14 15:36:08 +01:00
daid
c1730e2b08
Merge pull request #363 from yuroller/sanguino_panelolu
...
Panelolu pin assignment for sanguinololu
2013-01-10 07:19:37 -08:00
Yuri Valentini
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
2013-01-10 12:23:20 +01:00
daid303
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
2013-01-10 11:08:45 +01:00
daid
6ec56fa923
Merge pull request #334 from KevinOConnor/FanKick
...
Add feature to briefly run the cooling fan at full speed when it first starts.
2013-01-09 02:47:59 -08:00
daid
965baf2683
Merge pull request #362 from daid/Marlin_v1
...
Finnish language
2013-01-09 02:42:09 -08:00
Kevin O'Connor
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
2013-01-08 18:49:18 -05:00
Henry Palonen
7f30039d2a
+ Finnish translation
2013-01-08 19:21:34 +02:00
daid303
14e1d495ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2013-01-08 17:10:30 +01:00
daid303
bbe7d3d0fe
Fixed #312
2013-01-08 17:09:57 +01:00
daid
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
2013-01-08 06:22:27 -08:00
Yuri Valentini
9c34c4f05b
fixes for ramps compilation using installed arduino ide
2013-01-08 12:54:31 +01:00
daid303
442ade15a6
Move Gen6 stuff into a proper location.
2013-01-08 12:31:28 +01:00
daid
5fd4582cc8
Merge pull request #242 from Drakelive/Marlin_v1
...
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
2013-01-08 03:29:20 -08:00
daid303
8b88e3b386
Fixed #345 , Fixed #267 .
2013-01-08 12:14:55 +01:00
daid
27843388c6
Merge pull request #360 from njprossi/Marlin_v1
...
Power signal control definitions for other power supplies
2013-01-08 02:58:02 -08:00
daid303
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
2013-01-08 11:53:18 +01:00
Yuri Valentini
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
2013-01-07 17:26:50 +01:00
Nicolas Rossi
437eb3bafc
Initialize PS_ON at startup
2013-01-07 14:57:51 +01:00
Nicolas Rossi
f3c1fc70a9
Power signal control definitions for ATX and others
2013-01-07 14:33:30 +01:00
Yuri Valentini
dad7691df9
makefile for sanguino standalone compilation
2013-01-07 11:08:10 +01:00
Erik vd Zalm
6752cb2d9c
PID now per extruder. Fixed typo
2013-01-06 14:26:23 +01:00
Erik vd Zalm
0ac452e252
Disable is now multi extruder compatible. M84 got a T option.
2013-01-06 13:37:01 +01:00
Johann Rocholl
9e7b5056a0
{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.
2012-12-28 16:20:10 -08:00
Daniele Sdei
5f82f03ff3
Add italian MSG_RESUMING.
2012-12-28 11:44:35 +01:00
daid303
5e3873c8db
Add german MSG_RESUMING.
2012-12-25 20:53:11 +01:00
daid303
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
2012-12-19 12:26:40 +01:00
daid
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-17 02:16:31 -08:00
daid303
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
2012-12-17 11:09:09 +01:00
Johann Rocholl
8caf5d252d
Remove bogus blank line.
2012-12-16 12:50:20 -08:00
Johann Rocholl
1c2ecddae4
Fix typo (# missing before define).
2012-12-16 12:33:44 -08:00
Johann Rocholl
6dfb8a2187
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
2012-12-16 12:30:33 -08:00
Johann Rocholl
3b2e5027e5
Merged updates from Marlin_v1.
2012-12-16 12:19:24 -08:00
Johann Rocholl
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
2012-12-16 01:36:57 +01:00
Sergey Taranenko
5697451c72
fix lcd class
2012-12-14 15:39:47 +04:00
Sergey Taranenko
58e806f3fa
Fix the russial translation.
2012-12-14 15:39:26 +04:00
Sergey Taranenko
50a5ce1dc4
deduplicate messages
2012-12-14 15:37:05 +04:00
daid303
6123a00e64
Fix the german translation.
2012-12-14 11:11:02 +01:00
daid303
7c21716886
Fixed #341
2012-12-14 10:53:11 +01:00
daid303
ae1bc83350
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 13:25:22 +01:00
daid303
596a7e1904
Fix compiling for Arduin < 1.0.0
2012-12-13 13:24:55 +01:00
Daid
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
2012-12-13 12:19:12 +01:00
Daid
673577a31b
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 11:41:34 +01:00
Daid
23022f1a82
Updates to Makefile to compile for Teensy.
2012-12-13 11:41:27 +01:00
daid
96e9db8919
Merge pull request #339 from KevinOConnor/CompilerFlags
...
Add additional optimization flags to Makefile
2012-12-13 01:30:17 -08:00
daid303
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
2012-12-13 10:25:29 +01:00