AnHardt
6e6e3cf443
merged https://github.com/MarlinFirmware/Marlin.git
2015-01-30 11:05:29 +01:00
AnHardt
b3ca430a20
Inducted the defined placeholders in the translation table.
2015-01-30 10:35:14 +01:00
AnHardt
e045034c3f
Included Configuration.h to read the defined charsets.
...
Defined the charsets plus a default.
2015-01-30 10:31:58 +01:00
AnHardt
27c638803e
Defined three charsets.
2015-01-30 10:28:22 +01:00
Scott Lahteine
073c59c50a
Clean up some formatting
...
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
2015-01-29 18:52:21 -08:00
AnHardt
9a4d4b3a2f
translated Deltamenu
2015-01-29 13:19:32 +01:00
AnHardt
8aa6487b4b
MSG_ENDSTOP_ABORT = 'Endstop abort' > 'Endstop Abbr. Ein'
2015-01-29 13:12:55 +01:00
AnHardt
666ad7106b
Translated redundand: define MSG_INIT_SDCARD and MSG_CNG_SDCARD
2015-01-29 13:09:12 +01:00
AnHardt
e5c45fbe8c
Infoscreen messages end with a '.' if not to long.
...
MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet.
Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die
Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom
stehen, weil sie eingeschaltet sind.
2015-01-29 13:02:21 +01:00
AnHardt
1e22137e27
MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch'
...
to work out that this can't be resumed.
2015-01-29 12:41:46 +01:00
AnHardt
05d2ebd118
MSG_WATCH > 'Beobachten' > 'Info'
2015-01-29 12:29:31 +01:00
AnHardt
06cba91c39
eye candy 2
2015-01-29 12:26:21 +01:00
AnHardt
9352c9547f
MSG_SPEED = 'Geschw' > 'Geschw.'
2015-01-29 12:13:44 +01:00
AnHardt
0dfb0162f3
eye candy.
2015-01-29 12:07:01 +01:00
AnHardt
7222b27501
MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis?
2015-01-29 12:02:58 +01:00
AnHardt
a6f808c9b1
remove unused #define MSG_RETRACT
2015-01-29 11:58:50 +01:00
AnHardt
152fa579f5
MSG_SWITCH_PS_OFF = 'Switch Power Off' -> 'Netzteil Aus'
2015-01-29 11:55:36 +01:00
AnHardt
7a32b742f3
MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein'
2015-01-29 11:50:51 +01:00
AnHardt
4e176d2ce8
MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier'
2015-01-29 11:45:18 +01:00
AnHardt
1f8c8ad3ed
MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier'
2015-01-29 11:39:35 +01:00
AnHardt
0e8836ce5e
MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home'
2015-01-29 11:36:07 +01:00
AnHardt
56d3e6615d
MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'#
2015-01-29 11:19:10 +01:00
Scott Lahteine
1258980832
Merge pull request #1429 from bq/Development
...
Add bq Witbox 3D printer
2015-01-29 01:14:18 -08:00
Victor Andueza
766762a4dc
Change url link
2015-01-29 09:28:50 +01:00
Scott Lahteine
7df9ca051c
Merge pull request #1428 from thinkyhead/issue_1388_eeprom
...
Make EEPROM storage consistent
2015-01-28 22:58:04 -08:00
Scott Lahteine
fe3810f073
yeah, what he said
2015-01-28 22:27:15 -08:00
Scott Lahteine
6137bbd484
use eeprom read correctly
2015-01-28 22:10:31 -08:00
Scott Lahteine
9bc9051405
Flag EEPROM write errors on serial output
...
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
2015-01-28 21:19:51 -08:00
Scott Lahteine
ff99ca3040
Fix alignment of Restore following PIDTEMP
...
Should be reading 4 x 4 PID values instead of 4 x 3
2015-01-28 20:48:32 -08:00
Philip Schell
6c285930cb
Fixing wrong pin to heater extruder 2 <-> 3
...
Extruder 2 and 3 was swapped
2015-01-28 23:57:22 +01:00
Victor Andueza
0d4ce27b79
Add pins_WITBOX file
2015-01-28 17:26:50 +01:00
Victor Andueza
13118cde33
Add bq Witbox 3D printer
2015-01-28 16:52:36 +01:00
Scott Lahteine
093fedfde8
Make EEPROM storage consistent
...
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
2015-01-28 01:08:48 -08:00
Scott Lahteine
34377ee512
Merge pull request #1427 from thinkyhead/fewer_preheat_strings
...
Remove language strings that only add a number
2015-01-27 22:10:08 -08:00
Scott Lahteine
7378a7fef4
Merge pull request #1408 from thinkyhead/cleanup_servo
...
Formatting cleanup of quiet sources
2015-01-27 22:09:04 -08:00
Scott Lahteine
5fbef6bed2
Merge pull request #1409 from thinkyhead/rename_lastnr
...
Rename lastnr to autostart_index and...
2015-01-27 22:07:23 -08:00
Scott Lahteine
53eea611b8
Fix MSG_NOZZLE
2015-01-27 22:00:32 -08:00
Scott Lahteine
d7211a5324
Changes for Portuguese too
2015-01-27 21:53:08 -08:00
Scott Lahteine
0a21727c0a
Portuguese (pt) and Brazilian Portuguese (pt-br)
2015-01-27 21:45:21 -08:00
Scott Lahteine
c90f2e77d8
Remove language strings that only add a number
...
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
2015-01-27 21:36:58 -08:00
Scott Lahteine
2ce4a102ee
Add support for Megatronics 3 a la #1426
2015-01-27 15:54:46 -08:00
Scott Lahteine
ae4b348d77
Make sure _Ex_PINS is defined
...
Also fix analogInputToDigitalPin so it uses proper C hex notation
2015-01-27 15:36:47 -08:00
Scott Lahteine
80be6f3f91
tweak tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
ebe78cb36f
tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
82474fef8a
Max endstop pins disabled by configuration
...
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
2015-01-27 15:33:21 -08:00
Scott Lahteine
8045e4d60d
Add support for 4th extruder
...
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
2015-01-27 15:33:21 -08:00
Scott Lahteine
df4f3e7712
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
b6ecbd8cc4
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
4e573134de
Cleanup heading
2015-01-27 15:32:34 -08:00
Scott Lahteine
574a5ab72a
Split up pins to make it more manageable
...
Hopefully this is helpful to organization and future expansion….
2015-01-27 15:32:34 -08:00
