bkubicek
7fad13a1e2
Reverse SD card file name order.
...
This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.
this should satisfy https://github.com/ErikZalm/Marlin/pull/373
as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.
2013-10-12 13:24:55 +02:00
bkubicek
b832f5b9f6
added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try.
...
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
2013-10-07 09:14:04 +02:00
bkubicek
c38b0855c8
I think that filament change is ready for the masses. I have tested very often with my ultimaker.
...
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
2013-10-06 21:20:26 +02:00
bkubicek
d147a057ac
Add the socalled "Babystepping" feature.
...
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *
It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.
Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.
say goodby to fuddling around with the z-axis.
2013-10-06 21:14:51 +02:00
Erik van der Zalm
bca353cc12
Fixed duplicate define in fastio.h
2013-10-03 19:24:53 +02:00
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
ErikZalm
1bda6bf862
Merge pull request #609 from phq1910/patch-1
...
Update Configuration.h
2013-09-26 11:47:58 -07:00
ErikZalm
c80aac1518
Merge pull request #610 from phq1910/patch-2
...
Update pins.h
2013-09-26 11:47:47 -07:00
Erik van der Zalm
314fd13c39
Fix for Viki display
2013-09-26 20:32:19 +02:00
phq1910
4f7c6dfe35
Update pins.h
...
Include Pins cpu Sethi 3D
2013-09-26 11:40:54 -03:00
phq1910
57173739a1
Update Configuration.h
...
Include CPU Sethi 3D
2013-09-26 11:29:44 -03:00
Erik van der Zalm
0dca49a7c0
Added Azteeg X3 board.
2013-09-24 17:31:16 +02:00
Erik van der Zalm
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
2013-09-23 23:29:46 +02:00
Erik van der Zalm
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
2013-09-23 23:25:11 +02:00
Erik van der Zalm
3ca1ca6869
Fixed missing ENCODER_PULSES_PER_STEP
2013-09-23 23:18:35 +02:00
Tim Koster
97b0da0c2e
Removed #ifndef BLINKM
2013-09-22 10:43:27 +03:00
Tim Koster
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
2013-09-20 10:57:42 +03:00
Richard Miles
77df2ab0e7
Make Y_DUAL_STEPPER_DRIVERS disabled by default
2013-09-17 21:49:44 +01:00
Richard Miles
ed1ab42186
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:19:20 +01:00
Richard Miles
f4a59e4ce5
Revert "Added Y_DUAL_STEPPER_DRIVERS"
...
This reverts commit 7ee275b620
.
2013-09-17 19:05:49 +01:00
Richard Miles
7ee275b620
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:02:00 +01:00
ErikZalm
6a1e980c6d
Merge pull request #600 from xoan/Encoder_Pulses_Per_Step
...
add ENCODER_PULSES_PER_STEP
2013-09-14 04:56:45 -07:00
ErikZalm
20076a8bd3
Merge pull request #598 from GDV0/Marlin_v1
...
FIx compilation error when enabling SERVO_ENDSTOPS (#591 )
2013-09-14 04:54:19 -07:00
Erik van der Zalm
3626b5ad8b
Removed Delta from the default config file.
...
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
2013-09-14 13:50:09 +02:00
Xoan Sampaiño
bf7007d02f
add ENCODER_PULSES_PER_STEP
2013-09-13 04:12:51 +02:00
GDV0
f17506c504
FIx compilation error when enabling SERVO_ENDSTOPS ( #591 )
2013-09-11 23:09:37 +02:00
Martin Lukasik
acd8619809
Fan fix for Panelolu2+Sanguinololu.
2013-09-10 22:10:58 +01:00
George Roberts
595580556c
Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert.
...
Bug introduced in version 6beb42cdf6
.
Robert did a good job of simplifying but messed up this chunk of code.
Looking at working version: 839bef6d5d
it seems there is no case where encrot3 should be defined as 2
because if ULTICONTROLLER is defined then NEWPANEL is also defined.
2013-09-10 09:56:19 -04:00
Tim Koster
88dfeefca3
Define BlinkM default disabled
2013-09-10 12:32:21 +03:00
Tim Koster
5350faf2a2
Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1
2013-09-10 12:27:26 +03:00
Tim Koster
7016cc9511
Added BlinkM support over i2c
2013-09-10 12:18:29 +03:00
Tim Koster
3b315b3da0
Added BlinkM support over i2c
2013-09-06 22:25:39 +03:00
Jim Morris
f26f26b7bd
Fix the example delta configuration as someone forgot to do it.
2013-09-05 16:36:55 -07:00
Peter Hercek
9aa2229077
add command M666 for adjusting delta printer endstop position
2013-08-28 01:15:20 +02:00
Robert F-C
9547fb9dfb
Add duplication and auto-park mode for dual x-carriage support.
2013-08-08 00:10:26 +10:00
Steve Kelly
53614e5144
add pins for rambo lcd
2013-08-03 11:45:53 -05:00
Steve Kelly
b42d24e31e
add additional pins to avr2560 for rambo lcd
2013-08-03 11:37:12 -05:00
Nicolas Rossi
b0c8120fcc
Added feedrate setting in exemple config for manual moves from panel
2013-08-03 13:09:53 +02:00
Nicolas Rossi
a54fe2d73c
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Marlin_main.cpp
2013-08-03 13:05:56 +02:00
ErikZalm
7ea63d08df
Merge pull request #565 from iXce/avrdudeconfpath
...
Detect OS in Makefile to use the correct avrdude.conf path
2013-08-02 13:16:07 -07:00
ErikZalm
4187b637a5
Merge pull request #570 from hg42/separate-INVERTING-macros-for-MIN-and-MAX-endstops
...
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-02 13:15:30 -07:00
ErikZalm
07e7de3600
Merge pull request #569 from hg42/convert-PROTOCOL-macros-from-statements-to-expressions
...
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
2013-08-02 13:13:29 -07:00
Guillaume Seguin
c0c4c97db6
Detect OS in Makefile to use the correct avrdude.conf path
2013-08-01 19:20:27 +02:00
hg42@gmx.net
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-01 15:06:39 +02:00
hg42@gmx.net
3700f688f5
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
2013-08-01 14:56:39 +02:00
daid
a504c88346
Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts.
2013-08-01 14:12:30 +02:00
Nicolas Rossi
394ed08f88
Added feedrate setting for manual moves from panel
2013-07-30 14:33:30 +02:00
Nicolas Rossi
9bf1cf1b22
Pre-calculate diagonal rod length squared
2013-07-30 14:09:21 +02:00
Nicolas Rossi
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:02:18 +02:00
Brendan-csel
d7f384f680
Skip SD menu refresh if nothing has changed
2013-07-30 14:02:15 +02:00
Brendan-csel
abc8320a68
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-30 14:02:13 +02:00
Guillaume Seguin
f4c3135c6d
Add Panelolu2 pins for RAMPS1.3
2013-07-30 14:02:11 +02:00
Guillaume Seguin
aae42c68f9
Update French translation in language.h
2013-07-30 14:02:08 +02:00
Guillaume Seguin
4d435c38a6
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-30 14:02:06 +02:00
Guillaume Seguin
6c42a3a339
Woops, fix logic
2013-07-30 14:02:04 +02:00
Guillaume Seguin
376d8af2c8
Report temperatures for all extruders
2013-07-30 14:02:01 +02:00
ErikZalm
434b6a05c1
Merge pull request #552 from iXce/Marlin_v1
...
Report temperatures for all extruders in reply to M105
2013-07-29 10:39:21 -07:00
ErikZalm
bdc2621119
Merge pull request #561 from Brendan-csel/Marlin_v1
...
Fix for Viki LCD issues printing from SD card
2013-07-29 10:38:17 -07:00
ErikZalm
6965bd4e15
Merge pull request #560 from njprossi/Marlin_v1
...
Fixed move from panel for delta bot #557
2013-07-29 10:37:40 -07:00
ErikZalm
a55b33e613
Merge pull request #559 from iXce/panelolupinsramps13
...
Add Panelolu2 pins for RAMPS1.3
2013-07-29 10:37:03 -07:00
ErikZalm
8b34351537
Merge pull request #558 from iXce/frenchupdate
...
Update French translation in language.h
2013-07-29 10:36:43 -07:00
ErikZalm
735e556724
Merge pull request #555 from iXce/liquidtwi2_makefile
...
Add support of LiquidTWI2-based panels to Makefile
2013-07-29 10:33:54 -07:00
Brendan-csel
d80aecda0a
Skip SD menu refresh if nothing has changed
2013-07-29 21:00:29 +12:00
Brendan-csel
be2dea1dc6
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-29 20:58:09 +12:00
Nicolas Rossi
55c287a69e
Fixed move from panel for delta bot #557
2013-07-28 22:54:37 +02:00
Guillaume Seguin
1902d339b0
Add Panelolu2 pins for RAMPS1.3
2013-07-28 19:19:57 +02:00
Guillaume Seguin
eb23a68e92
Update French translation in language.h
2013-07-28 18:50:47 +02:00
ErikZalm
1561c6df51
Merge pull request #547 from wolfmanjm/delta-configuration
...
Setup Default configuration for Deltas if DELTA is defined
2013-07-24 03:11:36 -07:00
Guillaume Seguin
374bc99fa3
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-24 12:09:53 +02:00
Jim Morris
ab624eac2a
revert COnfiguratiuon to the same as head
2013-07-24 02:57:46 -07:00
Jim Morris
52f79ffeca
add an example default configuration for delta style bots
2013-07-24 02:55:52 -07:00
Jim Morris
b9d7ccf1cd
Merge remote-tracking branch 'upstream/Marlin_v1' into delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2013-07-24 02:49:25 -07:00
Guillaume Seguin
d4d1540727
Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit
2013-07-24 11:19:38 +02:00
Guillaume Seguin
01ed99143c
Woops, fix logic
2013-07-23 23:34:42 +02:00
Guillaume Seguin
76841450c8
Only display poweron/poweroff if PS_ON_PIN > -1
2013-07-23 22:28:30 +02:00
Guillaume Seguin
44f327d738
Uniformly reindent language.h
2013-07-23 22:13:40 +02:00
Guillaume Seguin
326d2db025
Update language.h so that all languages compile
...
Some strings still need translation, but at least everything compiles.
2013-07-23 22:11:54 +02:00
Guillaume Seguin
2cb716f513
Run Marlin/language.h through dos2unix
2013-07-23 21:49:37 +02:00
Guillaume Seguin
34da3a0a3f
Merge github.com:ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/language.h
2013-07-23 21:46:41 +02:00
Guillaume Seguin
18199ff960
Merge github.com:ErikZalm/Marlin into Marlin_v1
2013-07-23 21:33:52 +02:00
Robert F-C
fb5334f428
Fixed compile error when QUICK_HOME is defined.
...
As well a couple of minor changes to handling of extruder offset for
dual x-carriage mode.
2013-07-22 22:46:14 +10:00
Robert F-C
c3568398b5
Disable DUAL_X_CARRIAGE by default
2013-07-20 23:50:30 +10:00
Robert F-C
39cd3dbdbe
Remove dual x-carriage functionality that could/should be implemented in slicer
...
Also added a couple of missed merge lines in homeaxis() from previous
commit.
2013-07-20 13:07:50 +10:00
Jim Morris
fb20ceabce
enable soft endstops for delta
...
disable delta by default
2013-07-17 16:21:51 -07:00
Jim Morris
d01ee7e7b5
fix zjerk being the same for delta as xy jerk
...
add more delta defaults
on delta make second home even slower
2013-07-17 16:14:07 -07:00
Robert F-C
d7390e13d9
Support dual x-carriage printers
...
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
2013-07-17 22:44:45 +10:00
Jim Morris
f3aa2a48e7
update max pos
2013-07-17 01:29:51 -07:00
Jim Morris
460751503e
Added default configurations for deltas when DELTA is defined
2013-07-17 01:17:27 -07:00
Maik Stohn
9da94c247a
fixed bad lcd commit from makr3d
...
#elsif does not exist #elif is correct
2013-07-15 17:34:21 +02:00
Erik van der Zalm
59004023fd
Fixed typo
2013-07-15 17:22:56 +02:00
Erik van der Zalm
461dad6e05
Added : M32 - Select file and start SD print (Can be used when printing from SD card)
...
Untested
2013-07-14 22:39:59 +02:00
Erik van der Zalm
c4a2077951
M109 and M190 now wait when cooling down if R is used instead of S.
...
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
2013-07-14 21:10:24 +02:00
ErikZalm
8a2a3ef91d
Merge pull request #531 from iXce/Marlin_v1_lcd
...
Only clamp panel movements if software endstops are enabled
2013-07-14 06:50:23 -07:00
Erik van der Zalm
6397b3339c
restored configuration.h defaults
2013-07-14 15:49:03 +02:00
Erik van der Zalm
cdaaad3df1
Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1
2013-07-14 15:45:49 +02:00
Erik van der Zalm
e3bdefd873
fixed missing #endif
2013-07-14 15:42:53 +02:00
Erik van der Zalm
a5be0c52c6
no message
2013-07-14 15:35:54 +02:00
Michael Mayer
e509cdbeb0
added contrast control function for gLCDs
2013-07-14 15:28:26 +07:00
Michael Mayer
99b7e926e7
added MaKr3d Melzi board
2013-07-14 15:17:55 +07:00
Gabino Lopez
68be33b1fc
Update language.h
...
I update the spanish Messages, now this compile for spanish language.
2013-07-04 10:23:00 +02:00
daid
acb3271c9a
Merge pull request #534 from xifle/Marlin_v1
...
Fixes compiler warning for feedrate deadzone
2013-07-01 23:41:51 -07:00
xifle
61fe430d4f
Should fix compiler warning for feedrate deadzone
2013-07-01 11:10:02 +02:00
Gord Christmas
fde17d5720
Fix for ugly code compilation errors in SERVO_ENDSTOP checks
2013-06-28 08:02:04 -07:00
Guillaume Seguin
aa65c20d1f
Only clamp panel movements if software endstops are enabled
2013-06-28 14:18:00 +02:00
Erik van der Zalm
ecf3ab5de4
Added thermistor 60 to configuration.h
2013-06-27 23:25:51 +02:00
Nicolas Rossi
2daa85918e
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/language.h
Marlin/pins.h
Marlin/ultralcd.cpp
2013-06-20 23:59:56 +02:00
Erik van der Zalm
2015989f84
Added DISABLE_MIN_ENDSTOPS
2013-06-18 19:20:26 +02:00
Christian Inci
648d45cfb2
Fix Pin Description Typo
...
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2013-06-16 23:35:33 +02:00
ErikZalm
171719f18c
Merge pull request #525 from lajos/ultralcd_pid
...
ultralcd.cpp compile errors when !defined(PIDTEMP)
2013-06-16 00:02:54 -07:00
lajos
b519af4f05
fixed another !defined(PIDTEMP) compile in ultralcd.cpp
2013-06-15 20:49:18 -04:00
lajos
7d03c52511
fixed compile error in ultralcd.cpp when PIDTEMP undefined
2013-06-15 18:09:52 -04:00
lajos
02dee80fa5
added Azteeg X1 motherboard
2013-06-15 16:58:17 -04:00
Henrik Brix Andersen
47dc70e3ec
Fix location of avrdude.conf
2013-06-15 09:50:25 +02:00
Henrik Brix Andersen
1d258903bb
Allow command line compilation when using BEEPER.
2013-06-15 09:36:55 +02:00
Erik van der Zalm
e34c9981ab
Delta disabled by default
2013-06-11 22:33:58 +02:00
Erik van der Zalm
26a441fc7d
More 3Drag controller patches.
2013-06-10 18:26:15 +02:00
Erik van der Zalm
ac975ed8c2
Merge branch 'deltabot' into Marlin_v1
2013-06-10 18:20:29 +02:00
Jim Morris
caa848f943
fix homing for deltas
2013-06-09 21:10:00 -07:00
Erik van der Zalm
7ad12be763
Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
README.md
2013-06-09 23:10:41 +02:00
Erik van der Zalm
408169aef4
Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/language.h
Marlin/pins.h
2013-06-09 22:57:40 +02:00
Erik van der Zalm
bd96d22bfb
Merge branch 'Marlin_v1' into thinkyhead
...
Conflicts:
Marlin/Configuration.h
Marlin/Configuration_adv.h
Marlin/Marlin.h
Marlin/Marlin_main.cpp
Marlin/Servo.cpp
Marlin/language.h
Marlin/pins.h
Marlin/planner.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
README.md
2013-06-09 22:26:47 +02:00
Erik van der Zalm
73f21cd5d6
Spanish updated so far.
2013-06-09 21:40:35 +02:00
Erik van der Zalm
6f4a6e531c
Merge branch 'deltabot' into Marlin_v1
2013-06-09 13:55:18 +02:00
Erik van der Zalm
01edf22a10
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
2013-06-09 13:54:19 +02:00
Erik van der Zalm
ff6fa09ecf
Moved corexy implementation from stepper to planner
...
(Thanks iquizzle)
2013-06-09 13:10:06 +02:00
Erik van der Zalm
c8dcc7c208
Allow increasing the software PWM frequency.
2013-06-09 12:52:49 +02:00
Erik van der Zalm
8b0d82e9db
Removed "awaiting translation" for french
2013-06-09 12:24:06 +02:00
Erik van der Zalm
1e05d192ab
Make the beep tone less offensive
2013-06-09 12:21:16 +02:00
Erik van der Zalm
373f3ecab3
Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/pins.h
2013-06-09 00:51:58 +02:00
kiyoshigawa
f295712008
Trying to fix weird diff on ultralcd_implementation_hitachi_HD44780.h
2013-06-08 09:27:56 -06:00
kiyoshigawa
69b02031ca
Fixed small error in lcd define statements.
2013-06-08 09:09:11 -06:00
kiyoshigawa
6a81291c57
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
...
This should fix issues with pull request 467, I hope.
Conflicts:
Marlin/Configuration.h
Marlin/Marlin.pde
Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-06-08 08:48:18 -06:00
BorisLandoni
c1cb5977ee
Update Configuration.h
2013-06-08 14:37:39 +02:00
BorisLandoni
8a5bd8a808
Update Configuration.h
2013-06-08 14:37:17 +02:00
BorisLandoni
c1d7cf939e
Update language.h
2013-06-07 17:38:17 +02:00
BorisLandoni
4c7d1436e9
Update pins.h
2013-06-07 18:37:44 +03:00
BorisLandoni
6588933c04
Update Configuration.h
2013-06-07 18:36:16 +03:00
Scott Lahteine
5dabc95409
Apply all changes from latest Marlin_V1
...
Diffed and merged, preserving my updates
2013-06-06 15:49:25 -07:00
Gord Christmas
a733537ddd
Missed some variable declarations
...
Integrated fixes from henrikbrixandersen pull request #504
2013-06-06 09:18:03 -07:00
Gord Christmas
f4f30c9d64
Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.
2013-06-06 07:36:52 -07:00
Erik van der Zalm
79374f0b93
Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-06-05 17:44:48 +02:00
Maik Stohn
da05b3ba94
faster GLCD (ST7920 SW-SPI) implementation / fixes
...
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
2013-06-05 16:27:44 +02:00
kiyoshigawa
4b19c8552e
Fixing changed Configuration.h settings to be default values per ErikZalm Request.
2013-06-04 12:01:55 -06:00
Erik van der Zalm
971ec35135
Expanded M302 to allow setting the temp
2013-06-02 17:36:23 +02:00
Erik van der Zalm
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
2013-05-29 19:29:30 +02:00
Guillaume Seguin
16b9239a26
Report temperatures for all extruders
2013-05-29 18:06:12 +02:00
ErikZalm
a964b3cf3d
Merge pull request #495 from Gatulibu/Marlin_v1
...
Added support for Megatronics v2.0 and Minitronics v1.0
2013-05-28 07:51:49 -07:00
Maik Stohn
e8572c5239
Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation
2013-05-28 15:53:07 +02:00
Maik Stohn
7ee70c2248
Fix: removed wrong ; at end of define
2013-05-28 15:50:48 +02:00
Gatulibu
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
...
merged from code downloaded from reprapworld.com
2013-05-28 14:03:31 +02:00