Commit graph

172 commits

Author SHA1 Message Date
Scott Lahteine
a7b02975b7 No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
2015-01-24 05:10:48 -08:00
Scott Lahteine
6723388f7f Proposed fix to #1379. Printrboard I2C LCD support 2015-01-24 05:01:02 -08:00
Scott Lahteine
f16bdd2ff2 Borrow from Ultimaker to fix MAX6675 SPI conflict
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
2015-01-24 03:49:15 -08:00
Scott Lahteine
25f79c5010 Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
Add: Board for Vellemann K8200 (derived from 3Drag)
2015-01-23 06:08:38 -08:00
CONSULitAS
3b50a5e2e6 Add: Board for Vellemann K8200 (derived from 3Drag)
## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
roglio
ccdbeda526 Fixing a build error for melzi and gfx display
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
PxT
67b597ad46 Update printrboard pin assignments
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
Todd Swindoll
506353892e Rambo Pin documentation and servo support
Updated pins reference and servo support.

cross referenced between Rambo 1.1, 1.2, and 1.3
2015-01-07 11:02:05 -06:00
Grogyan
6b82415c81 Update pins.h
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
2014-12-31 13:04:16 +13:00
Bernhard Kubicek
10ad9f1062 Addes servo0 pin ultimaker 2014-12-29 17:27:14 +01:00
fmalpartida
ec33df0554 Merge branch 'SAV-MkI_merge' into Development
Tested for SAV MKI and SAV 3D LCD on lewihe.
2014-12-28 19:54:06 +01:00
Scott Lahteine
f83d0f2a68 Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
2014-12-18 13:59:31 -08:00
Bo Herrmannsen
280504e2e0 Merge pull request #908 from alromh87/Marlin_v1
Support for Gen3 Monolithic electronics
2014-12-17 22:28:07 +01:00
Neil Darlow
b81021f475 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-21 12:06:56 +01:00
Erik van der Zalm
058e446531 Merge pull request #1037 from filipmu/Filament-Sensor
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
Erik van der Zalm
aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
Scott Lahteine
f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Javi
40ba644bb4 Added profile for RAMPS with 2 extruders and 1 fan.
modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h
2014-09-06 02:53:36 +02:00
Neil Darlow
1632e5e38a Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-09-04 12:21:35 +01:00
Erik van der Zalm
0fbfb1bf82 Merge pull request #991 from bonm014/patch-1
Leapfrog controller board support
2014-08-28 16:27:52 +02:00
Filip Mulier
85649a4549 Real-time filament diameter measurement and control
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
2014-08-06 19:30:57 -05:00
Grogyan
bcd039aa81 Update pins.h 2014-07-05 17:55:03 +12:00
bonm014
32a6451ad8 Add leapfrog and dual Y/Z
I have added the pin set for the leapfrog and the support of dual Y and Z
2014-07-03 21:15:03 +02:00
bonm014
f244045245 Update pins.h
Leapfrog board added to the pin list
2014-07-03 21:01:41 +02:00
Neil Darlow
9d11b70436 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-06-07 20:48:25 +01:00
David Forrest
09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 2014-05-29 17:19:16 -04:00
Neil Darlow
e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
Alejandro Romero
1c9a70cee9 Support for Gen3 Monolithic electronics
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
2014-05-06 19:24:20 -05:00
Cameron Lai
105bebb466 Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used 2014-04-25 12:57:47 +08:00
Cameron Lai
97ead2eccb Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used 2014-04-25 12:57:11 +08:00
Cameron Lai
2fa514e88a Add port for 5DPrint D8 Driver board 2014-04-24 12:55:00 +08:00
Neil Darlow
6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-21 15:10:57 +01:00
nothinman
3ffc9651b1 Merge pull request #845 from DerSchultze/Sanguinololu-servo
Added servo pin assignments to Sanguinololu
2014-04-13 00:37:28 +01:00
Neil Darlow
73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-06 19:15:29 +01:00
nothinman
dfb98101e4 Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible) 2014-04-03 18:05:48 +01:00
Neil Darlow
89f78b0b80 Allow use of either SD Card slot when LCD Panel is configured.
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
2014-03-27 17:02:17 +00:00
Ralf Schultz
eecda434fb Sanguinololu servo pins set default disabled 2014-03-18 08:25:20 +01:00
Ralf Schultz
06709ad60e Added servo pin assignments to Sanguinololu 2014-03-17 15:45:13 +01:00
Peter
c9c83a4560 Updated gen3+ board pins names to current convention 2014-02-16 00:47:06 +13:00
daid
d16a770855 Ultimainboard 2.x does not has a PS_ON pin. 2014-02-13 10:57:03 +01:00
Jim Morris
5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca Add Azteeg X3 Pro as motherboard 68
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
Ronald
8d162e5bd7 Improved support for panelolu2 encoder and buzzer
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
daid
df194f75e1 Added PT100 support for Ultiboard2 2014-01-06 11:20:03 +01:00
daid
380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 2014-01-06 11:05:02 +01:00
Michal Dyntar
e8786bf110 Added support for Cheaptronic v1 electronic 2013-12-07 13:29:47 +01:00
ErikZalm
59b96e323e Merge pull request #640 from fmalpartida/SAV-MkI
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
2013-11-10 07:26:08 -08:00
Daniel Benamy
cab84e0e5b Add (correct) missing pin definitions for Y2
I tested this and it works.
2013-10-30 22:44:20 -04:00
fmalpartida
b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration.
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
2013-10-30 11:45:32 +01:00
Erik van der Zalm
8a08cca0f2 Added temperature status less.
Hopefully fixed viky button handling without braking other boards
2013-10-20 12:12:35 +02:00