Commit graph

129 commits

Author SHA1 Message Date
MagoKimbra 986e723eeb Add 4th extruder 2015-01-24 13:37:58 +01:00
grob6000 bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
grob6000 0877aa0fe0 Merge remote-tracking branch 'upstream/Development' into independent_pid 2015-01-11 11:32:58 +11:00
grob6000 7d32c7f36d Multiple PID parameter edit for ultralcd
* Depending on extruder count, will add menu items for ultralcd to edit
individual PID parameters for each extruder
* Added menu items to each language_xx.h
* Builds OK, but recommend testing with typical LCD
2015-01-11 01:14:02 +11:00
Scott Lahteine 326b925557 DOGLCD and LCD_PROGRESS_BAR to coexist
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
2015-01-09 18:16:56 -08:00
wgm4321 067b509479 Re-enable filament menu with recalc fix when enabling/disabling mm3 2015-01-05 22:29:29 -05:00
wgm4321 a19f2f8ae7 Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled 2015-01-04 22:15:16 -05:00
wgm4321 f24dda9700 Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3"
This reverts commit dd7e4ee97f.
2015-01-04 22:08:41 -05:00
wgm4321 ec4681ab6b Revert "Add "Detailed Z Probe" menu item with ABL is defined."
This reverts commit 2b9722f387.
2015-01-04 21:53:37 -05:00
wgm4321 dd7e4ee97f Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3 2015-01-04 21:44:55 -05:00
wgm4321 2b9722f387 Add "Detailed Z Probe" menu item with ABL is defined. 2015-01-04 21:42:16 -05:00
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development
Add Filament menu and add Filament/Retract settings to config store.
2015-01-02 15:35:29 +01:00
Scott Lahteine e7db8ee9e5 ftostr32np > ftostr32sp
sp=space-padded, similar to: ns=no-sign
2014-12-30 07:26:25 -08:00
Scott Lahteine 10e1b6ef8b Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:25 -08:00
Scott Lahteine d1f21d1189 As it should be 2014-12-30 07:26:25 -08:00
Scott Lahteine 449dad71f2 Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:24 -08:00
Scott Lahteine a2109cb492 Patch to make Z look more like X and Y on UltraLCD 2014-12-30 07:26:24 -08:00
Caleb Anderson cb047e9070 Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently) 2014-12-29 10:19:25 -07:00
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development
Tested for SAV MKI and SAV 3D LCD on lewihe.
2014-12-28 19:54:06 +01:00
Bo Herrmannsen c9f60183a9 Merge pull request #1233 from NarimaanV/Development
Fixed BABYSTEPPING feature
2014-12-28 10:13:21 +01:00
Scott Lahteine 2f467e2797 LCD Progress Bar 2014-12-27 22:26:14 -08:00
NarimaanV 7667949aca Fixed BABYSTEPPING feature
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
2014-12-23 12:49:54 -05:00
daid 17de96ace7 Merge branch 'Marlin_v1' into revert-1154-sd_sorting
Conflicts:
	Marlin/cardreader.cpp
	Marlin/cardreader.h
2014-12-18 23:13:50 +01:00
Bo Herrmannsen a9c334e8bc Merge pull request #1191 from thinkyhead/code_shrink
Shrink and Optimize
2014-12-18 17:23:11 +01:00
Scott Lahteine 1857e611d3 Other small tweaks 2014-12-18 07:49:16 -08:00
Scott Lahteine 63e1665fa9 Reduce ultralcd.cpp redundancies 2014-12-18 07:30:05 -08:00
Scott Lahteine e4b98011cf And one more... 2014-12-17 23:01:24 -08:00
Bo Herrmannsen 31ca3de72f Merge pull request #819 from neildarlow/Marlin_v1
Activate LiquidTWI2 device detection and space-pad LCD status line.
2014-12-17 21:42:53 +01:00
Bo Herrmannsen e83cfc0a62 Merge pull request #1163 from thinkyhead/lcd_abort_message
LCD "Abort" Message
2014-12-17 21:30:19 +01:00
Bo Herrmannsen 0b310ab6c5 Merge pull request #1153 from xinfab/negative_values_in_menu
Negative values in menu
2014-12-17 20:58:01 +01:00
Bo Herrmannsen 91d740e128 Merge pull request #1141 from filipmu/Filament-Sensor
Display filament sensor data on a 20x4 LCD or Graphical LCD
2014-12-17 20:38:30 +01:00
alexborro ab355a90d3 Revert "SD Sort and Buffer" 2014-12-17 14:50:59 -02:00
Scott Lahteine ae081d0fe0 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
Scott Lahteine 0cbbba08bd SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
Scott Lahteine 3ebfd29312 Print a message when printing is aborted
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-12-13 06:01:46 -08:00
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-12-04 21:09:03 +00:00
Scott Lahteine 3f54c9ba33 Relocate click ignore code into info screen 2014-11-26 21:05:10 -08:00
Scott Lahteine 92e21d3ee2 M0-M1 Enhancements
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Lionello Lunesu 0d35b1d0b8 Allow negative values in menus 2014-11-25 18:34:02 +08:00
Filip Mulier d84934d8c5 Display Filament Sensor data on 20x4 LCD
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD.  The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed.  The status message can be seen by
re-selecting the info screen in the menu.
2014-11-10 21:43:58 -06:00
Neil Darlow b81021f475 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-10-21 12:06:56 +01:00
Christian Inci 110c5dcf23 Fixed typo.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2014-10-11 00:25:36 +02:00
Matt Stultz ca30aee903 Fix "add_homeing" to "add_homing" to match changes 2014-10-07 00:16:27 -04:00
Erik van der Zalm 0f2e0525df Merge pull request #1096 from thinkyhead/set-home
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
Matthew Schick fb34265d75 Make hotend optional when compiling with lcd support
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-10-06 00:19:07 -04:00
Scott Lahteine 2f6c57eadc Proposed feature: Set Home Offsets
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
Neil Darlow 1632e5e38a Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-09-04 12:21:35 +01:00
Erik van der Zalm 018b68a5c4 Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
Erik van der Zalm dde61d8886 Merge pull request #977 from OskarLinde/Marlin_v1
Fix lcd itostr3() to handle negative numbers
2014-08-28 16:31:53 +02:00