Daid
e9bec9b6fe
Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)
2012-05-24 18:36:55 +02:00
linagee
fbd282b3ba
Update Marlin/Configuration.h
2012-05-20 13:19:28 -06:00
linagee
2e8c5049c5
Update Marlin/thermistortables.h
2012-05-20 13:18:45 -06:00
linagee
2d0d8e5272
Small correction.
2012-05-20 11:09:07 -06:00
Daid
4d7fe7115f
Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.
2012-05-20 14:37:30 +02:00
linagee
9e9db65c3f
Update Marlin/thermistortables.h
2012-05-20 05:51:29 -06:00
linagee
bd966ef389
Update Marlin/thermistortables.h
2012-05-20 05:49:01 -06:00
linagee
775da3f103
Added top ratings and extended to ADC=1 for table 3 and 5.
2012-05-20 05:35:57 -06:00
linagee
96a4baa0be
Update Marlin/thermistortables.h
2012-05-20 04:55:22 -06:00
linagee
2aa9f7b131
Update Marlin/thermistortables.h
2012-05-20 04:35:28 -06:00
linagee
c4490f5f3d
Update Marlin/Configuration.h
2012-05-20 04:27:52 -06:00
linagee
dd9144994e
Tested May 19 - It works! Verified with separate thermocouple TM-902C also.
2012-05-20 04:13:29 -06:00
linagee
4c37d0d9f1
Extended range above 250C. (Operating range states up to 300C)
2012-05-20 04:01:30 -06:00
Daid
b59724e42b
Add strigification for extruder amount in M115 report.
2012-05-19 19:01:14 +02:00
Daid
16413bb8f2
Last M401 update, refresh the LCD during an M401 wait.
2012-05-19 18:53:56 +02:00
Daid
b3941fce5c
Update after testing
2012-05-19 18:48:43 +02:00
Daid
d494688565
Do not initialize in the header file.
2012-05-19 17:57:52 +02:00
Daid
516ec90242
Add M401 - Wait for user on LCD button press
2012-05-19 17:54:07 +02:00
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2012-05-19 17:38:46 +02:00
linagee
de2ca3b2e8
Grammar correction.
2012-05-19 07:40:35 -06:00
linagee
c2fc466e1b
Update Marlin/Configuration.h
2012-05-19 05:56:17 -06:00
linagee
241f5a4c0e
Update Marlin/thermistortables.h
2012-05-19 05:52:12 -06:00
linagee
9f9f498491
Update Marlin/Configuration.h
2012-05-19 05:47:30 -06:00
Erik van der Zalm
e31bef31ad
Limit PID autotune PWM to PID_MAX
2012-05-16 19:32:23 +02:00
ErikZalm
b2a9ccdb97
Merge pull request #159 from MaikStohn/Marlin_v1
...
Marlin v1 - BUG FIXES / CORRECTIONS
2012-05-16 12:32:35 -07:00
Erik van der Zalm
d459fb41b7
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-05-16 19:22:08 +02:00
ErikZalm
804e0d6117
Merge pull request #164 from guanix/Marlin_v1
...
Melzi support
2012-05-16 12:21:48 -07:00
Erik van der Zalm
ba96059203
add additional dropsegments test
2012-05-16 19:21:44 +02:00
zittix
fbd91ab0b5
Fixes #153 for bad call to abs()
2012-05-16 18:17:34 +02:00
MaikStohn
b51c06e2b3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2012-05-11 16:57:08 +02:00
MaikStohn
159ae90874
bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)
2012-05-11 15:23:10 +02:00
MaikStohn
e48f5aa6a7
fixed typo
2012-05-11 15:22:06 +02:00
MaikStohn
1efe9ab497
changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu
2012-05-11 15:19:09 +02:00
Guan Yang
602c8ee02b
Melzi support
2012-05-09 18:37:07 -04:00
Daid
279d00da9f
Fixed #if for Ultimaker.
2012-05-09 10:50:44 +02:00
Bernhard Kubicek
451f9cc6d1
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
2012-05-09 08:05:13 +03:00
Erik de Bruijn
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
2012-05-08 17:44:08 +02:00
Erik de Bruijn
d88205d89d
Suggestion to improve (TODO), no actual code changed
2012-05-08 17:43:57 +02:00
Erik de Bruijn
5aa80e6c05
Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"
2012-05-08 17:43:02 +02:00
MaikStohn
b657a18449
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
...
This reverts commit 3682d9bd5b
.
2012-05-04 12:24:07 +02:00
MaikStohn
d188ae4c9d
added missing declaration of buttons_init()
...
This is required when moving the buttons_init() function to the
lcd_init() function
2012-05-03 15:48:44 +02:00
MaikStohn
3682d9bd5b
magic PROGMEM defines to avoid hundreds of wrong GCC warnings
2012-05-03 15:43:23 +02:00
MaikStohn
032df0b2c6
Moved LCD initialization out of constructor
...
Since the class "MainMenu" was used within a static variable the
initialization of the object (constructor call) was done before Arduino
library startup. It always caused a crash when using AVRStudio with
JTAG debugger (caused from calling the LCD initialization / the lot of
I/O work / the stack used during this calls). By moving the LCD_INIT
out of the constructor and using an explicit call inside of Arduino
setup() implementation immediately fixed all problems and the JTAG
debugger runs fine.
2012-05-03 14:28:17 +02:00
MaikStohn
bd1ad7c76a
explicit includes to make it compile with AVRStudio/Eclipse
2012-05-03 14:22:43 +02:00
MaikStohn
060b38de5c
delete obsolete and wrong code
...
"i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the
other hand the calculated value gets overwritten by either one of the
if choice.
2012-05-03 14:15:46 +02:00
MaikStohn
789ba02d43
fixed typo in comment
2012-05-03 14:13:53 +02:00
Erik van der Zalm
1874cb71a6
Added option to increase the FAN PWM frequency.
2012-05-02 19:26:14 +02:00
Erik van der Zalm
6a5a34e0ff
Small cleanup
2012-04-30 13:37:49 +02:00
Erik van der Zalm
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-04-30 13:36:27 +02:00
Erik van der Zalm
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
2012-04-30 13:36:19 +02:00
ErikZalm
e203b8c754
Merge pull request #154 from daid/Marlin_v1
...
Added 2nd extruder temperature LCD readout and setting.
2012-04-28 13:19:55 -07:00
ErikZalm
362ddc4efc
Merge pull request #155 from Atntias/patch-1
...
adding M120 and 121 for turning on and off the endstops only for homing
2012-04-28 13:19:19 -07:00
sefi
c27081aa4a
Fix to allow M120/M121
2012-04-28 17:35:51 +03:00
sefi
e11e072eca
adding M120 and 121 for turning on and off the endstops only for homing function
2012-04-28 17:31:22 +03:00
Daid
8e68c6cf89
Show proper temperature for extruder 2
2012-04-27 15:00:01 +02:00
Daid
8503b78876
Added support for 2nd extruder temperature to UltraLCD
2012-04-27 14:51:32 +02:00
Logan Bowers
3eacb4c16d
Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater
2012-04-25 19:22:38 -07:00
Bernhard
e4d2138dbd
reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time.
...
Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt.
actually, it solves a problem with the UltiControlle
2012-04-22 21:12:17 +02:00
Bernhard
464b755918
added support for the UltiController
2012-04-22 20:55:56 +02:00
Bernhard
44fd8d46d2
fixed quickhome
2012-04-22 20:44:27 +02:00
Bernhard
33bb044d7c
fixed catsting to (int)e in serial error messages.
...
see https://github.com/ErikZalm/Marlin/issues/148
2012-04-22 20:04:39 +02:00
ErikZalm
c2557abc03
Merge pull request #138 from triffid/fix-makefile
...
make should rebuild if configuration or Makefile is changed
2012-04-15 10:21:46 -07:00
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
2012-04-15 19:17:33 +02:00
Erik van der Zalm
8aee9d51b6
Disabled disable_heater in PID_autotune.
2012-04-12 21:12:31 +02:00
Daid
414408b2d0
Fix for wrong systax in #ifdef.
2012-04-12 14:01:30 +02:00
Michael Moon
77d503fa13
Fix Makefile
2012-04-11 11:39:35 +10:00
Erik van der Zalm
cf7c8c458f
Fixed MAX6675
2012-04-10 21:57:57 +02:00
grrf
03b0850e63
This breaks temperature readout for pronterface!
2012-04-09 23:37:34 +03:00
tgiphil
ad8bc71d3e
- Fixed a typo
2012-04-07 20:01:31 -07:00
Erik van der Zalm
46feae79c6
Fixed typo in arc
2012-04-02 17:19:20 +02:00
Erik van der Zalm
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
2012-04-01 16:23:40 +02:00
Erik van der Zalm
ae0bf8068b
Fixed arc offset.
2012-03-27 19:03:33 +02:00
Erik van der Zalm
0c1b863755
Ignore ":" in comments.
2012-03-25 14:41:26 +02:00
Erik van der Zalm
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
2012-03-25 14:36:51 +02:00
ErikZalm
8b785f75a6
Merge pull request #123 from buserror-uk/for-upstream
...
For upstream
2012-03-23 11:54:58 -07:00
Tommy Cheng
520f1a54a8
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.
2012-03-24 02:26:59 +08:00
Michel Pollet
5550e893d5
New board variant, Open Motion Controller
...
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com>
2012-03-22 13:51:21 +00:00
Michel Pollet
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
2012-03-22 13:48:10 +00:00
Bernhard
0183e6332a
made prepare->autostart independent of current folder.
2012-03-19 20:24:40 +01:00
Bernhard
1532200435
found error in filenames.
...
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
2012-03-19 20:06:58 +01:00
Erik van der Zalm
b985e4a134
Fixed compile errors in ultralcd when no ultra_lcd is selected.
2012-03-15 22:29:31 +01:00
Erik van der Zalm
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
2012-03-12 20:32:14 +01:00
Erik van der Zalm
33f5697888
PPID tune exports more constants.
2012-03-11 22:18:25 +01:00
Erik van der Zalm
b44055cc51
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-03-11 18:03:00 +01:00
Erik van der Zalm
f5eae52098
Added more manage_inactivity checks
2012-03-11 17:59:44 +01:00
ErikZalm
19a47dae4a
Merge pull request #99 from Justblair/master
...
Better pin configuration for rotary encoder in RAMPS boards
2012-03-11 04:34:59 -07:00
Erik van der Zalm
910f4e77a2
Added 20MHz support.
2012-03-11 12:25:04 +01:00
ErikZalm
7cefad3744
Merge pull request #106 from bgamari/Marlin_v1
...
Make F_CPU dependence of stepper.cpp more explicit
2012-03-11 01:48:30 -08:00
Erik van der Zalm
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
2012-03-11 10:44:10 +01:00
Erik van der Zalm
387fe51a56
Do not disable steppers when there are moves in the queue.
2012-03-09 20:20:01 +01:00
Erik van der Zalm
421264e58a
Fixed typo
2012-03-09 17:49:48 +01:00
Erik van der Zalm
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
2012-03-09 17:42:32 +01:00
Erik van der Zalm
61e09e6be2
Added FAN_PIN -1 checks
2012-03-08 22:09:49 +01:00
Erik van der Zalm
87c4e06c24
Corrected active_extruder when autotemp is used.
2012-03-08 22:04:13 +01:00
Erik van der Zalm
7b1e295f34
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-03-08 21:48:06 +01:00
Erik van der Zalm
c077316b2b
Added PID autotune. (experimental)
...
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
2012-03-08 21:43:21 +01:00
Ben Gamari
49b228c4b3
Add instructions to regenerate speed_lookuptable when changing F_CPU
2012-03-07 18:11:03 -05:00
Ben Gamari
96509494f0
stepper: Clarify comment on timer-counter configuration
2012-03-07 18:11:01 -05:00
Ben Gamari
6d7e6a11fc
Add create_speed_lookup
2012-03-07 18:11:01 -05:00
Tommy Cheng
ce07c9186d
While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.
2012-03-05 23:12:26 +08:00