Scott Lahteine
45d64040fe
Merge pull request #2048 from Wurstnase/hit_bits
...
replace some bools
2015-05-10 20:37:17 -07:00
Scott Lahteine
9b3d4380d3
Only watch the heater that was set
2015-05-10 20:26:45 -07:00
Scott Lahteine
52c0696e44
Merge pull request #2044 from thinkyhead/fix_servos_too
...
Make some z probe and servo code tweaks
2015-05-10 20:10:42 -07:00
Wurstnase
b55f32f8a1
replace some bools
...
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
2015-05-10 21:37:39 +02:00
Laurent DELAGE
e70e6e2b48
Correction traductions
2015-05-10 15:38:50 +02:00
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
2015-05-09 19:11:19 -07:00
Scott Lahteine
28c87ec81b
Disable all heaters on temp error
2015-05-08 23:17:25 -07:00
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
2015-05-08 22:50:08 -07:00
Scott Lahteine
6110494a56
Change default to 4°C in 16s
2015-05-08 22:41:12 -07:00
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
2015-05-08 22:36:02 -07:00
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
2015-05-08 22:25:51 -07:00
Scott Lahteine
be77cfd895
Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper
...
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
2015-05-08 20:32:30 -07:00
Scott Lahteine
cb4ea75fab
Support for MKS BASE 1.0 board
2015-05-08 19:07:37 -07:00
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
2015-05-08 18:19:31 -07:00
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
2015-05-08 21:27:18 +02:00
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
2015-05-08 14:36:23 +02:00
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
2015-05-08 04:39:59 -07:00
Scott Lahteine
181ccc884c
Edit thermal runaway description
2015-05-07 20:46:03 -07:00
Wurstnase
073e4af7e2
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.
2015-05-07 18:55:47 +02:00
brupje
b7fcb11580
Added example configuration for Megatronics
2015-05-07 13:18:05 +02:00
brupje
8f8174dc93
Revert "Default configuration for megatronics."
...
This reverts commit 22e0d2afcb
.
2015-05-07 13:12:17 +02:00
Scott Lahteine
79633a74ab
Fix MBL compile error
2015-05-06 14:25:13 -07:00
brupje
ba9741139e
Clean up pins file for megatronics
2015-05-05 14:01:52 +02:00
brupje
22e0d2afcb
Default configuration for megatronics.
2015-05-05 14:01:20 +02:00
brupje
816aa19861
Up/down buttons were reversed, swapped the assignments
2015-05-05 13:04:46 +02:00
brupje
df4d50579a
This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.
2015-05-05 12:47:24 +02:00
brupje
8f8bf3a897
Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented
2015-05-05 11:03:20 +02:00
Scott Lahteine
777f2d3820
Merge pull request #2018 from fmalpartida/bugFixing
...
Bug corrected: persistent HOMING message when HOME button pressed for homing.
2015-05-05 00:12:32 -07:00
Scott Lahteine
ecb46de349
Merge pull request #2013 from bq/Fix_lowercase
...
Fixed lowercase change missing on commit a22a228b
.
2015-05-04 23:50:56 -07:00
fmalpartida
150a35eff8
Bug corrected:
...
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
2015-05-04 19:48:49 +02:00
Gina Häußge
ab246ab032
Reverting changes to error messages on serial console
...
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera
59529b755d
Fixed lowercase change missing on commit a22a228b
.
...
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
2015-05-04 09:44:34 +02:00
Scott Lahteine
df4c104637
Merge pull request #2012 from BrianGilbert/Development
...
Add example configuration for Boots Industries V2.5 Delta Printer
2015-05-03 20:42:32 -07:00
Scott Lahteine
1f039cde61
Merge pull request #1992 from thinkyhead/too_many_probes
...
Stow Z probe on M402 without extra raise
2015-05-03 20:40:26 -07:00
Brian Gilbert
1285784a49
Add Boots Industries V2.5 example configuration
2015-05-04 09:10:42 +10:00
Scott Lahteine
35493e1af9
Tweak to planner.cpp position.debug
2015-05-03 16:03:05 -07:00
paclema
26015b02d8
Fixed typo and updated Configuration.h of configurator
2015-05-03 02:39:34 +02:00
paclema
aedd580911
Updated all configuration.h examples
2015-05-03 02:28:43 +02:00
Scott Lahteine
2c892fca6a
Cleanup of language.h
2015-05-01 21:38:32 -07:00
Scott Lahteine
2db384a21d
Fix compile error in configuration_store.cpp
2015-05-01 21:15:26 -07:00
Scott Lahteine
ca8cec8e8a
Merge pull request #1998 from paclema/Filament_runout_fix
...
Fixed sintaxis error of filament runout
2015-04-29 19:53:25 -07:00
Scott Lahteine
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
2015-04-29 19:44:50 -07:00
Scott Lahteine
d4c74b8f8c
Don't apply M428 if an error occurs
...
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
2015-04-29 19:05:48 -07:00
Scott Lahteine
d065d37822
Add M428 to set home_offset logically
2015-04-29 18:26:16 -07:00
paclema
013a09dbe6
Added configurable script for filrunout form configuration.h
2015-04-29 21:38:40 +02:00
paclema
4dcc0fd55a
Fixed sintaxis error of filament runout
2015-04-29 21:32:27 +02:00
AnHardt
514d8ac460
Enable TRP for the bed
...
in all Configurations.
2015-04-29 08:47:01 +02:00
Scott Lahteine
ce3caf447b
Tweak how homeaxis deploys and stows
2015-04-28 19:17:48 -07:00
Scott Lahteine
a235dca79c
Stow z on M402 without extra raise
2015-04-28 19:10:07 -07:00
Scott Lahteine
2610b8d047
Enable thermal runaway protection by default
2015-04-28 17:40:29 -07:00
AnHardt
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
2015-04-28 09:24:32 +02:00
Scott Lahteine
7548a56f64
Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO
...
Add pin configuration for Brainwave Pro
2015-04-27 23:13:26 -07:00
Scott Lahteine
02acf0641a
Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h
...
language_de.h: updated translation and minor typos
2015-04-27 22:45:24 -07:00
Scott Lahteine
a120bf3fe4
Latest upstream commits
2015-04-27 22:40:19 -07:00
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
2015-04-27 22:35:41 -07:00
Scott Lahteine
ae53b3cdc3
Fix the M303 S-1 report text
2015-04-27 22:25:00 -07:00
Scott Lahteine
c1fbef1722
Merge pull request #1988 from thinkyhead/bye_string_url
...
Remove obsolete STRING_URL
2015-04-27 22:12:05 -07:00
Scott Lahteine
31516e2a3b
Merge pull request #1985 from Arengorn/Development
...
Update of servo.h
2015-04-27 22:10:02 -07:00
Scott Lahteine
185f8a0a66
Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config
...
Example Configuration for K8200: comments/URL/readme
2015-04-27 21:59:56 -07:00
Scott Lahteine
0970102950
Remove obsolete STRING_URL
2015-04-27 21:59:14 -07:00
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
2015-04-27 21:47:47 -07:00
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
2015-04-27 21:41:14 -07:00
Scott Lahteine
c1dd9bda7f
Merge pull request #1987 from thinkyhead/fix_homing_zpos
...
Disable endstops between homing bumps
2015-04-27 21:16:47 -07:00
Scott Lahteine
71a0b1a5bb
Disable endstops between homing bumps
2015-04-27 21:14:30 -07:00
Scott Lahteine
8c28e36e75
Merge pull request #1986 from thinkyhead/fix_homing_zpos
...
Fix homing Z position
2015-04-27 20:58:14 -07:00
Scott Lahteine
c36226c4dc
Fix homing Z position
...
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
2015-04-27 20:55:19 -07:00
Scott Lahteine
2bc1d70a31
Merge pull request #1977 from AnHardt/Cinese2
...
We mark this historic day, when Marlin went to China.
2015-04-27 20:37:00 -07:00
Scott Lahteine
ff178d8cf7
Change M421 to take coordinates
...
This makes `M421` more amenable for irregular matrices
2015-04-27 19:48:34 -07:00
Bernardo
e449659338
Update Servo.cpp
...
Updated "servo.h" to "Servo.h"
2015-04-27 23:30:11 -03:00
Bernardo
ff67ee73fc
Update Marlin_main.cpp
...
Corrected "servo.h" to "Servo.h" because of the updated filename.
2015-04-27 23:29:16 -03:00
Scott Lahteine
5b248757c7
Level Bed in Prepare submenu
...
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
2015-04-27 19:11:25 -07:00
CONSULitAS
c5dfb35597
language_de.h: updated translation and minor typos
...
language_de.h: updated translation and minor typos
2015-04-28 01:03:54 +02:00
CONSULitAS
6423fe7601
language.h: update documentation / URL für K8200
...
language.h: update documentation for LANGUAGE_INCLUDE
language.h: URL für K8200 github repository
2015-04-28 01:01:57 +02:00
CONSULitAS
6af40e9dc0
K8200 example Configuration.h: STRING_URL removed
...
K8200 example Configuration.h:
* STRING_URL removed: like proposed by thinkyhead in #1917
2015-04-27 23:59:10 +02:00
CONSULitAS
d1c1f766d5
Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST
...
Conflicts:
Marlin/example_configurations/K8200/Configuration.h
2015-04-27 23:54:47 +02:00
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
2015-04-27 16:17:30 -04:00
AnHardt
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
2015-04-27 13:24:51 +02:00
AnHardt
1d9699be0f
Add some doku
2015-04-27 13:16:20 +02:00
AnHardt
76b12edecf
Give TALL_FONT_CORRECTION a default
2015-04-27 12:47:11 +02:00
AnHardt
6b1b71837c
Intit. commit for Chinese
...
Edited the European part of 'ISO10646_CN.fon' to match the existing fonts.
Added Chinese font to make_fonts.bat
Created 'dogm_font_data_ISO10646_CN.h'
Added Chinese to 'language.h'
Added 'language_cn.h' with some minor edits.
Added Chinese font in 'language_en.h' to not fall back to European font.
Added cn to 'Configuration.h'
Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names.
In 'dogm_lcd_implementation.h'
Added Chinese Font
Made 1 pixel more room for the larger Chinese font on the status line.
Changed geometry of the 'select bar' by one pixel.
Changed the way the position for values and postcars are set.
2015-04-27 12:15:36 +02:00
Scott Lahteine
fb379384ee
Reduce MBL eeprom read code
2015-04-26 21:06:04 -07:00
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
2015-04-26 20:56:33 -07:00
Scott Lahteine
d43cc2dd5f
M111 - Debug Level
...
- Add `M111` as a standard option to set the debug level
- Implement `DEBUG_ECHO` in `process_commands`
- Other debug levels (e.g., `DEBUG_DRYRUN`) need more work
2015-04-26 20:08:45 -07:00
Scott Lahteine
0ec444720f
Rename blinkm files
2015-04-25 21:06:19 -07:00
Scott Lahteine
a22a228bcc
Rename files to move them in the IDE
2015-04-25 21:04:54 -07:00
Scott Lahteine
a932e7490f
No noTone needed, but delay is
2015-04-25 03:25:30 -07:00
Scott Lahteine
9c5d14ea68
Fix BEEPER duration
2015-04-25 03:12:49 -07:00
Scott Lahteine
5c29fda167
Add a warning for DISABLE_[XYZ] options
2015-04-25 00:46:33 -07:00
Scott Lahteine
0438f0d835
Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402
...
Raise Z for M401 and M402
2015-04-24 22:41:12 -07:00
Scott Lahteine
a640cad139
Merge pull request #1967 from thinkyhead/g4_dwell_message
...
Use millis_t for progress_bar_ms and expire_status_ms
2015-04-24 22:17:28 -07:00
Scott Lahteine
c92b59952a
Use millis_t for progress_bar_ms and expire_status_ms
2015-04-24 22:16:09 -07:00
Scott Lahteine
b275946a52
Merge pull request #1966 from thinkyhead/g4_dwell_message
...
G4 shows status message only if no message is set already
2015-04-24 22:02:37 -07:00
Scott Lahteine
97dfa0365d
Rename expireStatusMillis to expire_status_ms
2015-04-24 21:51:10 -07:00
Scott Lahteine
7295640f44
Remove extraneous ;
2015-04-24 21:37:27 -07:00
Scott Lahteine
0d8c00d3f6
Define lcd_hasstatus for no lcd also
2015-04-24 21:36:04 -07:00
Scott Lahteine
182f2cda35
Minor cleanup of M48
2015-04-24 21:26:36 -07:00
Scott Lahteine
3a6fd912cd
Latest upstream commits, merged
2015-04-24 21:14:13 -07:00
Scott Lahteine
3c9e94e035
Merge pull request #1964 from AnHardt/Max6675again
...
Add variant for MAX6675 in M104
2015-04-24 20:44:45 -07:00
Scott Lahteine
56ff46eb8b
Improve code_has_value test
2015-04-24 20:43:16 -07:00
Scott Lahteine
ce142afdda
G4 shows status message only if no message is set already
...
- Address issue raised in #1961
2015-04-24 20:13:01 -07:00
Scott Lahteine
35e79d56a5
Remove set-coordinate extension of G28
2015-04-24 19:23:12 -07:00
Scott Lahteine
3a74bb5039
Merge pull request #1945 from Wurstnase/max_endstopp
...
Max endstopp
2015-04-24 19:17:38 -07:00
AnHardt
0fed46360c
Add variant for MAX6675 in M104
...
Else will throw error:
@:0 B@:0
Error:No thermistors - no temperature
[ERROR] Error:No thermistors - no temperature
when no bed is defined
2015-04-24 16:43:19 +02:00
Wurstnase
79a44a9de3
stepper.cpp macros rework
...
delete some tabs
2015-04-24 08:03:17 +02:00
Scott Lahteine
588ed70d4a
Latest upstream commits, merged
2015-04-23 21:18:48 -07:00
Scott Lahteine
0165560333
Apply zprobe_zoffset in axis_is_at_home
...
Ensure the probe offset will always be included when homing Z.
2015-04-23 21:12:38 -07:00
Scott Lahteine
075386e7fe
Merge pull request #1959 from thinkyhead/lcd_move_rate
...
Include axis parameter to ultralcd's line_to_current
2015-04-23 21:06:57 -07:00
Scott Lahteine
2558c10c6c
Use the slower feedrate for XY axes
2015-04-23 20:06:17 -07:00
Scott Lahteine
31932912dd
Use AxisEnum instead of int for _lcd_move
2015-04-23 19:32:37 -07:00
Scott Lahteine
c2e11daf66
Merge pull request #1958 from thinkyhead/redo_1937
...
Fix homing of YZ with DUAL_X_CARRIAGE
2015-04-23 19:12:51 -07:00
Scott Lahteine
c3560e0288
Include axis parameter to ultralcd's line_to_current
2015-04-23 19:10:09 -07:00
Scott Lahteine
a0a5ff61c4
Merge pull request #1951 from AnHardt/Azteeg_x3
...
Fix for #1946
2015-04-23 18:40:00 -07:00
Scott Lahteine
0094481e55
Merge pull request #1955 from AnHardt/langlang
...
Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
2015-04-23 18:36:06 -07:00
Scott Lahteine
64268f3312
Fixup axis_is_at_home a little
2015-04-23 18:16:44 -07:00
Scott Lahteine
996d0a9185
Squish the code down a little
2015-04-23 18:06:36 -07:00
Scott Lahteine
8534bc376c
Fix homing of YZ with DUAL_X_CARRIAGE
2015-04-23 17:56:37 -07:00
Scott Lahteine
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
2015-04-23 17:50:02 -07:00
Wurstnase
be9e4ceddc
fix typo
...
c'n'p ftw :/
2015-04-23 10:35:14 +02:00
unknown
c26d816839
filter any 0
2015-04-22 12:09:57 +02:00
AnHardt
f2c94b3298
tone will end automaticly
2015-04-22 01:49:55 +02:00
AnHardt
c5e0e29d23
Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
...
and add some documentation - how to integrate a new font.
2015-04-21 21:42:00 +02:00
AnHardt
b59e92ab99
Fix for #1946
...
Syntax error.
2015-04-21 13:50:28 +02:00
Wurstnase
61ae43f35e
v <-> code_value
2015-04-20 23:31:10 +02:00
Wurstnase
da0d91a79b
max endstopp
...
no user will home to 0 with a max endstopp
2015-04-20 23:28:46 +02:00
AnHardt
3a27a78f9e
Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
...
and removed some tabs.
2015-04-20 15:01:43 +02:00
AnHardt
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
2015-04-20 11:11:13 +02:00
Wurstnase
92575cecca
new timout/add adv_ok
2015-04-20 00:22:40 +02:00
AnHardt
671aaf2dc9
Minor fix for M300
...
Corrected wrong order of parameters.
2015-04-19 13:25:20 +02:00
Scott Lahteine
d931220a65
Tweak comments
2015-04-18 23:12:29 -07:00
Scott Lahteine
47847765e2
Add M410 QuickStop command
2015-04-18 23:07:48 -07:00
Scott Lahteine
a4ca87ba99
Merge pull request #1933 from bq/Fix_stray_in_configuration
...
Fixed compilation error "error: stray ‘\357’ in program"
2015-04-18 03:56:31 -07:00
Scott Lahteine
5e3bb4bdf3
Merge pull request #1931 from paclema/M303_echo
...
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-18 03:49:31 -07:00
Ivan Galvez Junquera
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
...
Introduced in commit 697ee2dc
and later spread to other files.
2015-04-17 16:10:58 +02:00
paclema
581685a231
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-17 11:15:09 +02:00
Chris Palmer
483384aaa4
Fixed faulty comment merge
2015-04-17 09:31:53 +01:00
Chris Palmer
cc6b7cf3ce
Fixed some comment spellings.
2015-04-17 09:28:08 +01:00
Chris Palmer
e4595fa24a
Fixed jump in speed when using high accelerations on axes with lots of steps.
...
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
2015-04-16 23:04:38 +01:00
Wurstnase
b09a957fce
make 'wait' optional and mark as workaround
2015-04-16 21:42:54 +02:00
Scott Lahteine
63b98b8280
Raise Z for M401 and M402
2015-04-16 07:24:33 -07:00
wurstnase
d69da22f7c
last_command_time inside get_command()
2015-04-16 16:20:23 +02:00
Scott Lahteine
53be0f3399
Babystep delay 2us
2015-04-16 04:16:36 -07:00
wurstnase
574e2d856e
remove config
2015-04-16 13:07:20 +02:00
paclema
cde5eee2a5
Removed unnecessary comments
2015-04-15 19:01:09 +02:00
paclema
e1b69db6d1
Fixed M48 mismatch between n and P parameter on documentation
2015-04-15 18:17:58 +02:00
CONSULitAS
1de9b568db
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:02:13 +02:00
CONSULitAS
0af5e3a04f
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:00:41 +02:00
Scott Lahteine
637babb99b
Merge pull request #1915 from elgambitero/Development
...
Some minor translations to spanish
2015-04-14 19:59:39 -07:00
elgambitero
cb9ac490d4
Some minor translations to spanish
2015-04-14 23:14:52 +02:00
CONSULitAS
3851ac6226
Example Configuration for K8200 back in sync
...
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
2015-04-14 17:12:42 +02:00
CONSULitAS
b447a4ffab
Merge remote-tracking branch 'upstream/Development' into Development
2015-04-14 15:35:08 +02:00
Scott Lahteine
7336e6df07
Always define old_z, not always z2
2015-04-14 04:55:20 -07:00
Scott Lahteine
5dd87d2e74
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
...
- Potentially addressing #1911
2015-04-14 04:05:51 -07:00
Scott Lahteine
3f02da646c
Make sure axis_active is cleared for #1908
2015-04-14 03:41:37 -07:00
Scott Lahteine
e0e68c5cbc
Rename servos[] array in Marlin to servo[]
2015-04-14 03:13:25 -07:00
Chris Petersen
ffaf1b4f22
Add pin configuration for Brainwave Pro
...
Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork
2015-04-13 23:46:57 -07:00
Scott Lahteine
642f6a92bc
fix type of code_has_value
2015-04-13 18:02:17 -07:00
Scott Lahteine
17ad80c1e1
Spacing in XYZ_CONSTS
2015-04-13 17:58:47 -07:00
Scott Lahteine
09d60e0128
Naming and code comments
2015-04-13 17:17:36 -07:00
Mehmet Sutas
5a9e45cc4a
Fix Syntax Error Filament Runout Statement
2015-04-13 22:37:18 +03:00
Scott Lahteine
257a907456
Fix typo in next_bed_check_ms
2015-04-12 23:17:28 -07:00
Scott Lahteine
e4b1e8651b
next_ vars faster than previous_
...
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
2015-04-12 23:06:50 -07:00
Scott Lahteine
ccddc280be
Apply three more commits
2015-04-12 22:47:44 -07:00
Scott Lahteine
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
2015-04-12 17:17:41 -07:00
Scott Lahteine
8857b9e921
Use the extruder argument in plan_buffer_line
2015-04-12 16:57:00 -07:00
Scott Lahteine
ac2b23f574
Homing fixes
...
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
2015-04-11 20:06:48 -07:00
Scott Lahteine
055b11814a
Additional cleanup of ultralcd.cpp
2015-04-11 04:56:08 -07:00
Scott Lahteine
388dd0cfa5
Fix doubled lcd_quick_feedback
...
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
2015-04-11 04:45:04 -07:00
Scott Lahteine
c6bb98abad
machine name for hephestos too
2015-04-11 01:36:24 -07:00
Scott Lahteine
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
2015-04-10 21:29:42 -07:00
Scott Lahteine
5fe382949b
Some G-Codes comment cleanup
2015-04-10 16:16:13 -07:00
Scott Lahteine
8b16ebe705
Break out prevent_dangerous_extrude feature
...
- It’s inline here, but could be a macro and duplicated for
`planner.cpp`
2015-04-09 22:40:37 -07:00
Scott Lahteine
740152ee70
Merge branch 'Development' into cold_extrude
...
Latest upstream commits
2015-04-09 20:23:47 -07:00
Scott Lahteine
5914d9d7de
Shuffling declarations..
2015-04-09 20:21:30 -07:00
Scott Lahteine
b328c6e6b6
Shuffling declarations.
2015-04-09 20:05:10 -07:00
Scott Lahteine
fb4cefc91d
Define lcd_move_[xyz] ahead of lcd_move_menu_axis
2015-04-09 19:33:16 -07:00
Richard Miles
4c3736ed43
Feature: Add RAMPS CNC Controller Board
...
Created a new board to make using RAMPS as a CNC machine controller
easier. It maps pin 8 to the spindle and pin 9 to the controller fan.
2015-04-09 16:32:56 +01:00
Scott Lahteine
9189cc66ab
Fix moves for DELTA for MANUAL_BED_LEVELING
...
- Use `line_to_current` in place of `plan_buffer_line`
2015-04-09 04:32:14 -07:00
AnHardt
56fc3a4835
bgr -> bg
...
+ update in documentation
2015-04-09 13:09:18 +02:00
Scott Lahteine
7a1aef1450
Merge pull request #1877 from AnHardt/display-only
...
Made encoderPosition and quick_feedback dependant on NEWPANEL
2015-04-09 03:54:05 -07:00
Scott Lahteine
6096164d79
Merge pull request #1878 from thinkyhead/cold_extrude
...
Cold extrude
2015-04-09 03:41:54 -07:00
Scott Lahteine
a488445cbe
Fix spelling of "too"
2015-04-09 03:41:31 -07:00
Scott Lahteine
b1950a7f25
Merge pull request #1875 from Natealus/Development
...
Z Probe inverting not present in example configs, causes error
2015-04-09 03:37:24 -07:00
AnHardt
df50523605
Made encoderPosition and quick_feedback dependant on NEWPANEL
...
where the hardware is available.
Fix for #1873
2015-04-09 12:26:45 +02:00
Scott Lahteine
2ca099d1e7
Merge pull request #1876 from thinkyhead/cold_extrude
...
Catch dangerous extrude before trying several
2015-04-09 03:21:19 -07:00
Scott Lahteine
837ceb9abb
Merge pull request #1867 from epatel/Development
...
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
2015-04-09 02:29:47 -07:00
Scott Lahteine
a95544f92a
Spell adjustment
2015-04-09 02:04:06 -07:00
Scott Lahteine
a00ebf03d4
Merge pull request #1868 from AnHardt/LCD_STR
...
Moved the definitions of the LCD_STR_* to Conditionals.h
2015-04-09 01:56:23 -07:00
Scott Lahteine
1269c445ab
Catch dangerous extrude before trying several
2015-04-09 01:40:48 -07:00
Natealus
585eee6549
Z Probe inverting not present in example configs, causes error
...
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
2015-04-08 18:57:30 -06:00
AnHardt
c5961892e3
Bulgarian for all the Configuration.h's
2015-04-09 01:52:13 +02:00
AnHardt
6248c93f37
Introduction of Bulgarian - language_bgr.h
...
Thank you @Nprod!
2015-04-09 01:26:48 +02:00
AnHardt
540dbb35e2
And an other MSG_BED in Marlin_main.cpp
2015-04-09 01:16:06 +02:00
AnHardt
14d4419e16
Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed")
...
Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.
2015-04-08 23:59:01 +02:00
AnHardt
ea897654a4
Moved the definitions of the LCD_STR_* to Conditionals.h
...
to avoid errors in Marlin_main.cpp. #1860
In the include tree of Marlin_main.cpp the decision between the display types is not made.
To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code.
A 'dogm_lcd_implementation.h.h' would be a curiosity.
So i moved both of the definition blocks to conditionals.h
On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.
2015-04-08 21:53:58 +02:00
Edward Patel
7dc64efe67
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
2015-04-08 20:52:48 +02:00
AnHardt
6a514f3dc9
Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp
...
and cleaned typo.
2015-04-08 13:26:29 +02:00
AnHardt
a76fb42ca6
Merge https://github.com/MarlinFirmware/Marlin into contrast
2015-04-08 13:05:21 +02:00
AnHardt
bcc04192fc
Remove Contrast Menu for U8GLIB_ST7920
...
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
2015-04-08 12:56:38 +02:00
Scott Lahteine
4788b59300
Thermistor values for configurator
2015-04-08 03:12:21 -07:00
Scott Lahteine
bb917ecda8
Merge pull request #1853 from thinkyhead/dev_version
...
Set version to "1.0.3 dev"
2015-04-08 01:57:51 -07:00
Scott Lahteine
caa7734402
Merge pull request #1864 from thinkyhead/is_running
...
IsStopped / IsRunning inline
2015-04-08 01:10:36 -07:00
Scott Lahteine
3162971cd6
current_position not static
2015-04-08 01:05:39 -07:00
Scott Lahteine
27cb90da8b
IsStopped / IsRunning inline
2015-04-08 00:56:19 -07:00
Max
07fc2b5b70
Update language_ru.h
2015-04-08 13:18:45 +06:00
Scott Lahteine
756bb5e268
Cleanup formatting in hitachi & dogm lcd
2015-04-07 22:04:10 -07:00
Scott Lahteine
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
2015-04-07 21:14:00 -07:00
Scott Lahteine
43773ff735
Formatting and lcd contrast masking
2015-04-07 21:11:03 -07:00
Scott Lahteine
eb6e3886f4
Set version to "1.0.3 dev"
2015-04-07 20:38:43 -07:00
Scott Lahteine
cf9b58452c
Minimum delay in menu click feedback
...
Squished #1849
2015-04-07 20:20:30 -07:00
Scott Lahteine
1d291be2ba
Fix de after PREVENT_DANGEROUS_EXTRUDE
...
- Set `de` to 0 when `position[E] = target[E]`
- Address regression mention in #1846
2015-04-07 20:01:08 -07:00
Scott Lahteine
e03da4805b
Merge pull request #1774 from epatel/Development
...
Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix
2015-04-07 19:24:46 -07:00
Scott Lahteine
f7c4e7e19f
Fix G29 not deploying in some instances
2015-04-07 15:38:29 -07:00
Edward Patel
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
2015-04-07 22:58:08 +02:00
Edward Patel
002340f32c
Merge branch 'Development-Marlin' into Development
2015-04-07 22:49:12 +02:00
Scott Lahteine
c379f17117
Encapsulate setting of homing_bump_feedrate
2015-04-06 23:21:33 -07:00
Scott Lahteine
7d2c2f1790
Updates for the configurator
...
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
2015-04-06 23:16:01 -07:00
Scott Lahteine
967db181d0
Latest upstream commits
2015-04-06 21:46:18 -07:00
Scott Lahteine
e502144eda
Fixup formatting of last commit
2015-04-06 21:28:14 -07:00
Scott Lahteine
d05efa008d
Merge pull request #1825 from shaggythesheep/bugfix_no_heaters
...
Bugfix: Temperature checks when no heaters in use
2015-04-06 21:25:22 -07:00
Scott Lahteine
d20f42c883
Don't stow the probe until the last grid point!
...
- Address Issue #1682 at hash #issuecomment-89756858
2015-04-06 20:58:09 -07:00
Scott Lahteine
5c2bb05af3
Merge pull request #1839 from AnHardt/fix-statusmessage
...
Fix lcd_status_message
2015-04-06 19:08:25 -07:00
Scott Lahteine
d70a4a3847
Merge pull request #1823 from AnHardt/splashscreen
...
Disable splash-screen when done once
2015-04-06 18:48:48 -07:00
Scott Lahteine
56aea5f8e5
Merge pull request #1829 from Natealus/Development
...
Azteeg X3 Pro Pin fix ups
2015-04-06 18:19:33 -07:00
Scott Lahteine
6a860b99dc
Merge pull request #1828 from Wackerbarth/Configurator
...
Update Configurator Files
2015-04-06 18:09:26 -07:00
AnHardt
ac843fbf3b
Fix lcd_status_message
...
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.
Fix for #1832 about at the end.
2015-04-07 02:33:34 +02:00
Scott Lahteine
6d084c017f
Fix typo in FWRETRACT handler
...
Should be `retracting` and not `retract`
2015-04-06 17:04:22 -07:00
Edward Patel
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
2015-04-06 23:03:06 +02:00
Edward Patel
9a093b2e8f
Added #error + mention not to enable ABL and Mesh at the same time
2015-04-06 19:38:59 +02:00
AnHardt
6ae714894e
Now the simplycistic solution.
...
Just and only display splashscreen only once.
2015-04-06 12:43:38 +02:00
AnHardt
d521693641
Revert "Draw content in display loop only when needed"
...
This reverts commit bf04a92cc0
.
2015-04-06 12:31:31 +02:00
Natealus
b6f2bff461
Azteeg X3 Pro Pin fix ups
2015-04-05 23:34:56 -06:00
Scott Lahteine
d867c18535
Fix compile error with Z_DUAL_ENDSTOPS
2015-04-05 20:48:08 -07:00
Richard Wackerbarth
46474cf2f2
Incorporate @section headers from configurator
2015-04-05 22:39:40 -05:00
Richard Wackerbarth
cf66cb8808
Bring configurator up-to-date
2015-04-05 22:38:15 -05:00
Richard Miles
1a5293c2ce
Prevents MINTEMP / MAXTEMP when no heaters present
...
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
2015-04-05 22:27:14 +01:00
Edward Patel
5360158545
Merge branch 'Development-Marlin' into Development
2015-04-05 20:28:44 +02:00
AnHardt
bf04a92cc0
Draw content in display loop only when needed
...
Example for splash screen.
2015-04-05 12:53:20 +02:00
AnHardt
9865318f1c
Disable splash-screen when done once
...
Splash screen was shown with every display init.
That means every time the menus where entered.
Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
2015-04-05 12:24:01 +02:00
Scott Lahteine
53eb662908
Have the configurator read from MarlinFirmware repo
2015-04-04 20:19:17 -07:00
Edward Patel
d24ea7c03f
Added Comment in hope of github seeing these updates
2015-04-05 05:14:06 +02:00
Edward Patel
61de6ecd54
Added change to example Configuration.h's
2015-04-05 04:26:35 +02:00
Edward Patel
2f0081bbb5
Compile error fix! Fix for merge artifacts.
2015-04-05 04:16:16 +02:00
Edward Patel
0e6514e7bd
Bug fix! Missed putting z value back in right slot after zigzag mod.
2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406
Merge branch 'Development-Marlin' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2015-04-05 04:06:02 +02:00
Scott Lahteine
cb02bc6db4
Merge pull request #1817 from AnHardt/dogm_looptest
...
Execute DOGM display-loop less often
2015-04-04 17:29:56 -07:00
quillford
b02a55e60f
Fixed scara directions
...
Config said for a delta instead of for a scara
2015-04-04 15:26:35 -07:00
Scott Lahteine
6c5f07c5cb
Merge pull request #1813 from thinkyhead/fixup_probing
...
Fix bad thermal runaway trigger
2015-04-04 14:41:43 -07:00
AnHardt
340d165a9c
Reduce display updates for dogm displays
...
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.
'lcd_status_update_delay'-loop was not effective in function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3
Revert "Testloop cleanup"
...
This reverts commit 6361404b91
.
2015-04-04 18:33:36 +02:00