SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
11522 commits 1 branch 0 tags 119 MiB
Commit graph

11522 commits

This branch
This branch
All branches
Author SHA1 Message Date
ErikZalm
3ec0d110bd Merge pull request #741 from Opticalworm/Marlin_v1 
Changed 1284p fuse setting for 8, 16 and 20 Mhz
 2014-02-02 12:17:22 -08:00
Ronald
f303129fb6 Changed 1284p fuse setting for 8, 16 and 20 Mhz 
Symtopns:

- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.

Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
 2014-02-02 13:13:15 +00:00
whosawhatsis
b2c11ba980 Change diameter code to 'D' 
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.

Also some minor code improvements to M200.
 2014-02-01 18:49:25 -08:00
ErikZalm
a864d9d4ab Merge pull request #738 from whosawhatsis/Marlin_v1 
Group hardware files for Arduino 1.x.x into hardware folder
 2014-02-01 13:03:00 -08:00
whosawhatsis
28aca76c4d Group hardware files for Arduino 1.x.x into hardware folder 2014-02-01 12:22:37 -08:00
ErikZalm
61059385a3 Merge pull request #737 from whosawhatsis/M200 
M200 implementation
 2014-02-01 10:37:49 -08:00
whosawhatsis
856edfcc0d Fixed math 
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
 2014-01-31 08:43:11 -08:00
ErikZalm
0d81ae77bc Merge pull request #727 from drf5n/oversampling 
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
 2014-01-31 07:09:10 -08:00
ErikZalm
84df13f7d1 Merge pull request #721 from drf5n/lcdOnly 
Enable basic ULTRA_LCD screen w/o encoders and menus.
 2014-01-31 07:07:12 -08:00
ErikZalm
4c7e9502ad Merge pull request #718 from drf5n/temptableRes 
createTemperatureLookupMarlin.py: Add resolution comments and format for...
 2014-01-31 07:06:02 -08:00
ErikZalm
652a0f6b5a Merge pull request #717 from drf5n/tpins2 
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
 2014-01-31 07:05:20 -08:00
ErikZalm
96a0cdc541 Merge pull request #716 from drf5n/maketeensy 
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
 2014-01-31 07:04:29 -08:00
whosawhatsis
d24df7af2c M200 implementation 2014-01-31 00:54:19 -08:00
David Forrest
f0b8d5ba3d createTemperatureLookupMarlin.py: Change comment to refer to actual program name. 2014-01-29 23:34:22 -05:00
David Forrest
50f44d9249 createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution. 2014-01-29 23:24:07 -05:00
David Forrest
f5b5dd8038 createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients. 2014-01-29 22:59:47 -05:00
David Forrest
76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 2014-01-21 23:25:51 -05:00
David Forrest
476c7193d8 temperature.cpp: Use OVERSAMPLENR in oversampling calculation. 2014-01-21 16:49:03 -05:00
nothinman
adbf226de1 Merge pull request #726 from DanLipsitt/patch-1 
Format README.md with subsections
 2014-01-21 12:46:47 -08:00
Dan Lipsitt
5bf73b86ff Format README.md with subsections 
Having actual section headers instead of just bold text makes those parts of the document individually linkable.
 2014-01-20 18:04:06 -08:00
ErikZalm
9b2576e5de Merge pull request #725 from whosawhatsis/Marlin_v1 
Fix bugs in Extruder Runout Prevention, including DAMAGING HEAD CRASH
 2014-01-19 23:44:36 -08:00
whosawhatsis
f08bb8bb6a Previous commit borked. 2014-01-19 22:06:45 -08:00
whosawhatsis
b1f8f492c6 Remove previous_millis_cmd update from extruder runout prevention code 
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
 2014-01-19 19:22:08 -08:00
whosawhatsis
8a5eaa3c9b Fix crash after home bug 
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
 2014-01-19 19:11:51 -08:00
David Forrest
61a7256d42 Enable basic ULTRA_LCD screen w/o encoders and menus. 2014-01-17 17:00:47 -05:00
alexborro
c724c762a2 Merge pull request #720 from sourceperl/Marlin_v1 
Update ConfigurationStore.cpp
 2014-01-17 07:15:35 -08:00
l.lefebvre
fdac8f6cec Update ConfigurationStore.cpp 
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
 2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458 Add Z Probe Offset to EEPROM and Ultra LCD 2014-01-16 18:13:46 -02:00
David Forrest
7216583b8b createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin. 2014-01-16 12:40:15 -05:00
David Forrest
e8e0697e48 fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility. 2014-01-16 11:23:29 -05:00
David Forrest
75f39fadfc Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84}) 2014-01-16 10:58:35 -05:00
daid
df194f75e1 Added PT100 support for Ultiboard2 2014-01-06 11:20:03 +01:00
daid
380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 2014-01-06 11:05:02 +01:00
alexborro
89a304fd98 Merge pull request #673 from fsantini/ErikZalm 
Improvements to the auto bed leveling feature
 2013-12-23 03:46:31 -08:00
fsantini
6ae7f7870d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2013-12-23 12:20:32 +01:00
Phil Wise
17d6d965dc Use C++ initialization list 
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
 2013-12-19 21:21:46 +00:00
ErikZalm
8f195844dd Merge pull request #687 from jrbenito/update_delta_config_examples 
Correct missing parameter from last upmerge
 2013-12-19 00:15:16 -08:00
Joseivaldo Benito Junior
ce8b9c4fc5 Correct missing parameter from last upmerge 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-19 00:50:44 -02:00
ErikZalm
000b710c5f Merge pull request #684 from jrbenito/update_delta_config_examples 
Update Delta example files
 2013-12-18 00:01:24 -08:00
Joseivaldo Benito Junior
8e48e24c7f Update Delta example files 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-18 00:04:36 -02:00
ErikZalm
46d2443c7d Merge pull request #676 from IVI053/Marlin_v1 
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
 2013-12-17 02:28:28 -08:00
-
eed053dffb Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" 
This reverts commit b7eadb9f37.
 2013-12-16 12:22:06 +01:00
ErikZalm
3e568efe67 Merge pull request #657 from hcker2000/patch-1 
Added new board
 2013-12-16 02:53:49 -08:00
Erik van der Zalm
8349fc89a4 Fixed planner bug 2013-12-16 11:40:23 +01:00
Francesco Santini
da2a6f9a31 Accurate bed leveling: x loop inside y and zigzag motion 2013-12-13 10:31:19 +01:00
ErikZalm
532289e851 Merge pull request #677 from RicardoGA/patch-1 
Z and Y dual stepper drivers error
 2013-12-11 12:52:39 -08:00
RicardoGA
d29615dc0c Z and Y dual stepper drivers error 
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware

to solve this problem i change this line:

#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS

to:

#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)

now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
 2013-12-11 14:37:43 -06:00
fsantini
5bde7fcb28 Minor code and comment polishing 2013-12-11 21:27:43 +01:00
-
20faff5935 Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry 2013-12-08 21:35:57 +01:00
-
e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 2013-12-08 21:34:56 +01:00