/** * Marlin 3D Printer Firmware * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * About Marlin * * This firmware is a mashup between Sprinter and grbl. * - https://github.com/kliment/Sprinter * - https://github.com/simen/grbl */ #include "Marlin.h" #include "lcd/ultralcd.h" #include "module/motion.h" #include "module/planner.h" #include "module/stepper.h" #include "module/endstops.h" #include "module/probe.h" #include "module/temperature.h" #include "sd/cardreader.h" #include "module/configuration_store.h" #include "module/printcounter.h" // PrintCounter or Stopwatch #ifdef ARDUINO #include #endif #include #include "libs/nozzle.h" #include "gcode/gcode.h" #include "gcode/parser.h" #include "gcode/queue.h" #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) #include "libs/buzzer.h" #endif #if (ENABLED(SWITCHING_EXTRUDER) && !DONT_SWITCH) || ENABLED(SWITCHING_NOZZLE) #include "module/tool_change.h" #endif #if ENABLED(BEZIER_CURVE_SUPPORT) #include "module/planner_bezier.h" #endif #if ENABLED(MAX7219_DEBUG) #include "feature/Max7219_Debug_LEDs.h" #endif #if HAS_COLOR_LEDS #include "feature/leds/leds.h" #endif #if HAS_SERVOS #include "HAL/servo.h" #endif #if HAS_DIGIPOTSS #include #endif #if ENABLED(DAC_STEPPER_CURRENT) #include "feature/dac/stepper_dac.h" #endif #if ENABLED(EXPERIMENTAL_I2CBUS) #include "feature/twibus.h" TWIBus i2c; #endif #if ENABLED(I2C_POSITION_ENCODERS) #include "feature/I2CPositionEncoder.h" #endif #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) #include "HAL/HAL_endstop_interrupts.h" #endif #if ENABLED(SDSUPPORT) CardReader card; #endif #if ENABLED(G38_PROBE_TARGET) bool G38_move = false, G38_endstop_hit = false; #endif #if ENABLED(DELTA) #include "module/delta.h" #elif IS_SCARA #include "module/scara.h" #endif #if HAS_LEVELING #include "feature/bedlevel/bedlevel.h" #endif #if ENABLED(SENSORLESS_HOMING) #include "feature/tmc2130.h" #endif #if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT) #include "feature/pause.h" #endif #if ENABLED(TEMP_STAT_LEDS) #include "feature/leds/tempstat.h" #endif bool Running = true; /** * axis_homed * Flags that each linear axis was homed. * XYZ on cartesian, ABC on delta, ABZ on SCARA. * * axis_known_position * Flags that the position is known in each linear axis. Set when homed. * Cleared whenever a stepper powers off, potentially losing its position. */ bool axis_homed[XYZ] = { false }, axis_known_position[XYZ] = { false }; #if ENABLED(TEMPERATURE_UNITS_SUPPORT) TempUnit input_temp_units = TEMPUNIT_C; #endif // Initialized by settings.load() float filament_size[EXTRUDERS], volumetric_multiplier[EXTRUDERS]; #if FAN_COUNT > 0 int16_t fanSpeeds[FAN_COUNT] = { 0 }; #if ENABLED(PROBING_FANS_OFF) bool fans_paused = false; int16_t paused_fanSpeeds[FAN_COUNT] = { 0 }; #endif #endif // For M109 and M190, this flag may be cleared (by M108) to exit the wait loop volatile bool wait_for_heatup = true; // For M0/M1, this flag may be cleared (by M108) to exit the wait-for-user loop #if HAS_RESUME_CONTINUE volatile bool wait_for_user = false; #endif // Inactivity shutdown millis_t max_inactive_time = 0, stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL; #if ENABLED(Z_DUAL_ENDSTOPS) float z_endstop_adj; #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) static bool filament_ran_out = false; #endif #if ENABLED(ADVANCED_PAUSE_FEATURE) AdvancedPauseMenuResponse advanced_pause_menu_response; #endif #if ENABLED(MIXING_EXTRUDER) float mixing_factor[MIXING_STEPPERS]; // Reciprocal of mix proportion. 0.0 = off, otherwise >= 1.0. #if MIXING_VIRTUAL_TOOLS > 1 float mixing_virtual_tool_mix[MIXING_VIRTUAL_TOOLS][MIXING_STEPPERS]; #endif #endif #ifdef CHDK millis_t chdkHigh = 0; bool chdkActive = false; #endif #if ENABLED(PID_EXTRUSION_SCALING) int lpq_len = 20; #endif #if ENABLED(I2C_POSITION_ENCODERS) I2CPositionEncodersMgr I2CPEM; uint8_t blockBufferIndexRef = 0; millis_t lastUpdateMillis; #endif /** * *************************************************************************** * ******************************** FUNCTIONS ******************************** * *************************************************************************** */ #if ENABLED(DIGIPOT_I2C) extern void digipot_i2c_set_current(uint8_t channel, float current); extern void digipot_i2c_init(); #endif void setup_killpin() { #if HAS_KILL SET_INPUT_PULLUP(KILL_PIN); #endif } #if ENABLED(FILAMENT_RUNOUT_SENSOR) void setup_filrunoutpin() { #if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT) SET_INPUT_PULLUP(FIL_RUNOUT_PIN); #else SET_INPUT(FIL_RUNOUT_PIN); #endif } #endif void setup_powerhold() { #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, HIGH); #endif #if HAS_POWER_SWITCH #if ENABLED(PS_DEFAULT_OFF) OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); #else OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); #endif #endif } void suicide() { #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, LOW); #endif } #if HAS_SERVOS HAL_SERVO_LIB servo[NUM_SERVOS]; void servo_init() { #if NUM_SERVOS >= 1 && HAS_SERVO_0 servo[0].attach(SERVO0_PIN); servo[0].detach(); // Just set up the pin. We don't have a position yet. Don't move to a random position. #endif #if NUM_SERVOS >= 2 && HAS_SERVO_1 servo[1].attach(SERVO1_PIN); servo[1].detach(); #endif #if NUM_SERVOS >= 3 && HAS_SERVO_2 servo[2].attach(SERVO2_PIN); servo[2].detach(); #endif #if NUM_SERVOS >= 4 && HAS_SERVO_3 servo[3].attach(SERVO3_PIN); servo[3].detach(); #endif #if HAS_Z_SERVO_ENDSTOP servo_probe_init(); #endif } #endif // HAS_SERVOS /** * Stepper Reset (RigidBoard, et.al.) */ #if HAS_STEPPER_RESET void disableStepperDrivers() { OUT_WRITE(STEPPER_RESET_PIN, LOW); // drive it down to hold in reset motor driver chips } void enableStepperDrivers() { SET_INPUT(STEPPER_RESET_PIN); } // set to input, which allows it to be pulled high by pullups #endif #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 void i2c_on_receive(int bytes) { // just echo all bytes received to serial i2c.receive(bytes); } void i2c_on_request() { // just send dummy data for now i2c.reply("Hello World!\n"); } #endif #if ENABLED(MIXING_EXTRUDER) void normalize_mix() { float mix_total = 0.0; for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mix_total += RECIPROCAL(mixing_factor[i]); // Scale all values if they don't add up to ~1.0 if (!NEAR(mix_total, 1.0)) { SERIAL_PROTOCOLLNPGM("Warning: Mix factors must add up to 1.0. Scaling."); for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_factor[i] *= mix_total; } } #if ENABLED(DIRECT_MIXING_IN_G1) // Get mixing parameters from the GCode // The total "must" be 1.0 (but it will be normalized) // If no mix factors are given, the old mix is preserved void gcode_get_mix() { const char* mixing_codes = "ABCDHI"; byte mix_bits = 0; for (uint8_t i = 0; i < MIXING_STEPPERS; i++) { if (parser.seenval(mixing_codes[i])) { SBI(mix_bits, i); float v = parser.value_float(); NOLESS(v, 0.0); mixing_factor[i] = RECIPROCAL(v); } } // If any mixing factors were included, clear the rest // If none were included, preserve the last mix if (mix_bits) { for (uint8_t i = 0; i < MIXING_STEPPERS; i++) if (!TEST(mix_bits, i)) mixing_factor[i] = 0.0; normalize_mix(); } } #endif #endif /************************************************** ***************** GCode Handlers ***************** **************************************************/ /** * Sensitive pin test for M42, M226 */ bool pin_is_protected(const int8_t pin) { static const int8_t sensitive_pins[] PROGMEM = SENSITIVE_PINS; for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) if (pin == (int8_t)pgm_read_byte(&sensitive_pins[i])) return true; return false; } #if ENABLED(PIDTEMP) #include "gcode/config/M301.h" #endif #if ENABLED(PIDTEMPBED) #include "gcode/config/M304.h" #endif #if defined(CHDK) || HAS_PHOTOGRAPH #include "gcode/feature/camera/M240.h" #endif #if HAS_LCD_CONTRAST #include "gcode/lcd/M250.h" #endif #if ENABLED(PREVENT_COLD_EXTRUSION) #include "gcode/config/M302.h" #endif #if ENABLED(MORGAN_SCARA) #include "gcode/scara/M360-M364.h" #endif #if ENABLED(EXT_SOLENOID) #include "gcode/control/M380_M381.h" #endif #include "gcode/control/M400.h" #if HAS_BED_PROBE #include "gcode/probe/M401_M402.h" #endif void quickstop_stepper() { stepper.quick_stop(); stepper.synchronize(); set_current_from_steppers_for_axis(ALL_AXES); SYNC_PLAN_POSITION_KINEMATIC(); } #if HAS_M206_COMMAND #include "gcode/geometry/M428.h" #endif #include "gcode/eeprom/M500.h" #include "gcode/eeprom/M501.h" #include "gcode/eeprom/M502.h" #if DISABLED(DISABLE_M503) #include "gcode/eeprom/M503.h" #endif #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) #include "gcode/config/M540.h" #endif #if ENABLED(MK2_MULTIPLEXER) #include "gcode/feature/snmm/M702.h" #endif #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) #include "gcode/control/M605.h" #endif #if ENABLED(LIN_ADVANCE) #include "gcode/feature/advance/M900.h" #endif #if ENABLED(HAVE_TMC2130) #include "feature/tmc2130.h" #include "gcode/feature/trinamic/M906.h" #include "gcode/feature/trinamic/M911.h" #include "gcode/feature/trinamic/M912.h" #if ENABLED(HYBRID_THRESHOLD) #include "gcode/feature/trinamic/M913.h" #endif #if ENABLED(SENSORLESS_HOMING) #include "gcode/feature/trinamic/M914.h" #endif #endif #include "gcode/feature/digipot/M907.h" #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT) #include "gcode/feature/digipot/M908.h" #if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF #include "gcode/feature/digipot/M909.h" #include "gcode/feature/digipot/M910.h" #endif #endif #if HAS_MICROSTEPS #include "gcode/control/M350.h" #include "gcode/control/M351.h" #endif #include "gcode/feature/caselight/M355.h" #if ENABLED(MIXING_EXTRUDER) #include "gcode/feature/mixing/M163.h" #if MIXING_VIRTUAL_TOOLS > 1 #include "gcode/feature/mixing/M164.h" #endif #if ENABLED(DIRECT_MIXING_IN_G1) #include "gcode/feature/mixing/M165.h" #endif #endif #include "gcode/control/M999.h" #include "gcode/control/T.h" #if ENABLED(USE_CONTROLLER_FAN) void controllerFan() { static millis_t lastMotorOn = 0, // Last time a motor was turned on nextMotorCheck = 0; // Last time the state was checked const millis_t ms = millis(); if (ELAPSED(ms, nextMotorCheck)) { nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_amount_bed > 0 || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled... #if E_STEPPERS > 1 || E1_ENABLE_READ == E_ENABLE_ON #if HAS_X2_ENABLE || X2_ENABLE_READ == X_ENABLE_ON #endif #if E_STEPPERS > 2 || E2_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 3 || E3_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 4 || E4_ENABLE_READ == E_ENABLE_ON #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #endif // E_STEPPERS > 1 ) { lastMotorOn = ms; //... set time to NOW so the fan will turn on } // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED; // allows digital or PWM fan output to be used (see M42 handling) WRITE(CONTROLLER_FAN_PIN, speed); analogWrite(CONTROLLER_FAN_PIN, speed); } } #endif // USE_CONTROLLER_FAN #if ENABLED(FILAMENT_RUNOUT_SENSOR) void handle_filament_runout() { if (!filament_ran_out) { filament_ran_out = true; enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); stepper.synchronize(); } } #endif // FILAMENT_RUNOUT_SENSOR float calculate_volumetric_multiplier(const float diameter) { if (!parser.volumetric_enabled || diameter == 0) return 1.0; return 1.0 / (M_PI * sq(diameter * 0.5)); } void calculate_volumetric_multipliers() { for (uint8_t i = 0; i < COUNT(filament_size); i++) volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); } void enable_all_steppers() { enable_X(); enable_Y(); enable_Z(); enable_E0(); enable_E1(); enable_E2(); enable_E3(); enable_E4(); } void disable_e_steppers() { disable_E0(); disable_E1(); disable_E2(); disable_E3(); disable_E4(); } void disable_all_steppers() { disable_X(); disable_Y(); disable_Z(); disable_e_steppers(); } /** * Manage several activities: * - Check for Filament Runout * - Keep the command buffer full * - Check for maximum inactive time between commands * - Check for maximum inactive time between stepper commands * - Check if pin CHDK needs to go LOW * - Check for KILL button held down * - Check for HOME button held down * - Check if cooling fan needs to be switched on * - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT) */ void manage_inactivity(bool ignore_stepper_queue/*=false*/) { #if ENABLED(FILAMENT_RUNOUT_SENSOR) if ((IS_SD_PRINTING || print_job_timer.isRunning()) && (READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING)) handle_filament_runout(); #endif if (commands_in_queue < BUFSIZE) get_available_commands(); const millis_t ms = millis(); if (max_inactive_time && ELAPSED(ms, gcode.previous_cmd_ms + max_inactive_time)) { SERIAL_ERROR_START(); SERIAL_ECHOLNPAIR(MSG_KILL_INACTIVE_TIME, parser.command_ptr); kill(PSTR(MSG_KILLED)); } // Prevent steppers timing-out in the middle of M600 #if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT) #define MOVE_AWAY_TEST !move_away_flag #else #define MOVE_AWAY_TEST true #endif if (MOVE_AWAY_TEST && stepper_inactive_time && ELAPSED(ms, gcode.previous_cmd_ms + stepper_inactive_time) && !ignore_stepper_queue && !planner.blocks_queued()) { #if ENABLED(DISABLE_INACTIVE_X) disable_X(); #endif #if ENABLED(DISABLE_INACTIVE_Y) disable_Y(); #endif #if ENABLED(DISABLE_INACTIVE_Z) disable_Z(); #endif #if ENABLED(DISABLE_INACTIVE_E) disable_e_steppers(); #endif #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD) // Only needed with an LCD ubl.lcd_map_control = defer_return_to_status = false; #endif } #ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH if (chdkActive && ELAPSED(ms, chdkHigh + CHDK_DELAY)) { chdkActive = false; WRITE(CHDK, LOW); } #endif #if HAS_KILL // Check if the kill button was pressed and wait just in case it was an accidental // key kill key press // ------------------------------------------------------------------------------- static int killCount = 0; // make the inactivity button a bit less responsive const int KILL_DELAY = 750; if (!READ(KILL_PIN)) killCount++; else if (killCount > 0) killCount--; // Exceeded threshold and we can confirm that it was not accidental // KILL the machine // ---------------------------------------------------------------- if (killCount >= KILL_DELAY) { SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(MSG_KILL_BUTTON); kill(PSTR(MSG_KILLED)); } #endif #if HAS_HOME // Check to see if we have to home, use poor man's debouncer // --------------------------------------------------------- static int homeDebounceCount = 0; // poor man's debouncing count const int HOME_DEBOUNCE_DELAY = 2500; if (!IS_SD_PRINTING && !READ(HOME_PIN)) { if (!homeDebounceCount) { enqueue_and_echo_commands_P(PSTR("G28")); LCD_MESSAGEPGM(MSG_AUTO_HOME); } if (homeDebounceCount < HOME_DEBOUNCE_DELAY) homeDebounceCount++; else homeDebounceCount = 0; } #endif #if ENABLED(USE_CONTROLLER_FAN) controllerFan(); // Check if fan should be turned on to cool stepper drivers down #endif #if ENABLED(EXTRUDER_RUNOUT_PREVENT) if (ELAPSED(ms, gcode.previous_cmd_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL) && thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP) { #if ENABLED(SWITCHING_EXTRUDER) const bool oldstatus = E0_ENABLE_READ; enable_E0(); #else // !SWITCHING_EXTRUDER bool oldstatus; switch (active_extruder) { default: oldstatus = E0_ENABLE_READ; enable_E0(); break; #if E_STEPPERS > 1 case 1: oldstatus = E1_ENABLE_READ; enable_E1(); break; #if E_STEPPERS > 2 case 2: oldstatus = E2_ENABLE_READ; enable_E2(); break; #if E_STEPPERS > 3 case 3: oldstatus = E3_ENABLE_READ; enable_E3(); break; #if E_STEPPERS > 4 case 4: oldstatus = E4_ENABLE_READ; enable_E4(); break; #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #endif // E_STEPPERS > 1 } #endif // !SWITCHING_EXTRUDER gcode.refresh_cmd_timeout() const float olde = current_position[E_AXIS]; current_position[E_AXIS] += EXTRUDER_RUNOUT_EXTRUDE; planner.buffer_line_kinematic(current_position, MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED), active_extruder); current_position[E_AXIS] = olde; planner.set_e_position_mm(olde); stepper.synchronize(); #if ENABLED(SWITCHING_EXTRUDER) E0_ENABLE_WRITE(oldstatus); #else switch (active_extruder) { case 0: E0_ENABLE_WRITE(oldstatus); break; #if E_STEPPERS > 1 case 1: E1_ENABLE_WRITE(oldstatus); break; #if E_STEPPERS > 2 case 2: E2_ENABLE_WRITE(oldstatus); break; #if E_STEPPERS > 3 case 3: E3_ENABLE_WRITE(oldstatus); break; #if E_STEPPERS > 4 case 4: E4_ENABLE_WRITE(oldstatus); break; #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #endif // E_STEPPERS > 1 } #endif // !SWITCHING_EXTRUDER } #endif // EXTRUDER_RUNOUT_PREVENT #if ENABLED(DUAL_X_CARRIAGE) // handle delayed move timeout if (delayed_move_time && ELAPSED(ms, delayed_move_time + 1000UL) && IsRunning()) { // travel moves have been received so enact them delayed_move_time = 0xFFFFFFFFUL; // force moves to be done set_destination_to_current(); prepare_move_to_destination(); } #endif #if ENABLED(TEMP_STAT_LEDS) handle_status_leds(); #endif #if ENABLED(HAVE_TMC2130) tmc2130_checkOverTemp(); #endif planner.check_axes_activity(); } /** * Standard idle routine keeps the machine alive */ void idle( #if ENABLED(ADVANCED_PAUSE_FEATURE) bool no_stepper_sleep/*=false*/ #endif ) { #if ENABLED(MAX7219_DEBUG) Max7219_idle_tasks(); #endif // MAX7219_DEBUG lcd_update(); #if ENABLED(HOST_KEEPALIVE_FEATURE) gcode.host_keepalive(); #endif #if ENABLED(AUTO_REPORT_TEMPERATURES) && (HAS_TEMP_HOTEND || HAS_TEMP_BED) thermalManager.auto_report_temperatures(); #endif manage_inactivity( #if ENABLED(ADVANCED_PAUSE_FEATURE) no_stepper_sleep #endif ); thermalManager.manage_heater(); #if ENABLED(PRINTCOUNTER) print_job_timer.tick(); #endif #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) buzzer.tick(); #endif #if ENABLED(I2C_POSITION_ENCODERS) if (planner.blocks_queued() && ( (blockBufferIndexRef != planner.block_buffer_head) || ((lastUpdateMillis + I2CPE_MIN_UPD_TIME_MS) < millis())) ) { blockBufferIndexRef = planner.block_buffer_head; I2CPEM.update(); lastUpdateMillis = millis(); } #endif } /** * Kill all activity and lock the machine. * After this the machine will need to be reset. */ void kill(const char* lcd_msg) { SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(MSG_ERR_KILLED); thermalManager.disable_all_heaters(); disable_all_steppers(); #if ENABLED(ULTRA_LCD) kill_screen(lcd_msg); #else UNUSED(lcd_msg); #endif _delay_ms(600); // Wait a short time (allows messages to get out before shutting down. cli(); // Stop interrupts _delay_ms(250); //Wait to ensure all interrupts routines stopped thermalManager.disable_all_heaters(); //turn off heaters again #ifdef ACTION_ON_KILL SERIAL_ECHOLNPGM("//action:" ACTION_ON_KILL); #endif #if HAS_POWER_SWITCH SET_INPUT(PS_ON_PIN); #endif suicide(); while (1) { #if ENABLED(USE_WATCHDOG) watchdog_reset(); #endif } // Wait for reset } /** * Turn off heaters and stop the print in progress * After a stop the machine may be resumed with M999 */ void stop() { thermalManager.disable_all_heaters(); // 'unpause' taken care of in here #if ENABLED(PROBING_FANS_OFF) if (fans_paused) fans_pause(false); // put things back the way they were #endif if (IsRunning()) { Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); LCD_MESSAGEPGM(MSG_STOPPED); safe_delay(350); // allow enough time for messages to get out before stopping Running = false; } } /** * Marlin entry-point: Set up before the program loop * - Set up the kill pin, filament runout, power hold * - Start the serial port * - Print startup messages and diagnostics * - Get EEPROM or default settings * - Initialize managers for: * • temperature * • planner * • watchdog * • stepper * • photo pin * • servos * • LCD controller * • Digipot I2C * • Z probe sled * • status LEDs */ void setup() { #if ENABLED(MAX7219_DEBUG) Max7219_init(); #endif #ifdef DISABLE_JTAG // Disable JTAG on AT90USB chips to free up pins for IO MCUCR = 0x80; MCUCR = 0x80; #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) setup_filrunoutpin(); #endif setup_killpin(); setup_powerhold(); #if HAS_STEPPER_RESET disableStepperDrivers(); #endif MYSERIAL.begin(BAUDRATE); while(!MYSERIAL); SERIAL_PROTOCOLLNPGM("start"); SERIAL_ECHO_START(); // Check startup - does nothing if bootloader sets MCUSR to 0 byte mcu = HAL_get_reset_source(); if (mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP); if (mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET); if (mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET); if (mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET); if (mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET); HAL_clear_reset_source(); #if ENABLED(USE_WATCHDOG) //reinit watchdog after HAL_get_reset_source call watchdog_init(); #endif SERIAL_ECHOPGM(MSG_MARLIN); SERIAL_CHAR(' '); SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION); SERIAL_EOL(); #if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR) SERIAL_ECHO_START(); SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE); SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR); SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Compiled: " __DATE__); #endif SERIAL_ECHO_START(); SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory()); SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE); queue_setup(); // Load data from EEPROM if available (or use defaults) // This also updates variables in the planner, elsewhere (void)settings.load(); #if HAS_M206_COMMAND // Initialize current position based on home_offset COPY(current_position, home_offset); #else ZERO(current_position); #endif // Vital to init stepper/planner equivalent for current_position SYNC_PLAN_POSITION_KINEMATIC(); thermalManager.init(); // Initialize temperature loop stepper.init(); // Initialize stepper, this enables interrupts! #if HAS_SERVOS servo_init(); #endif #if HAS_PHOTOGRAPH OUT_WRITE(PHOTOGRAPH_PIN, LOW); #endif #if HAS_CASE_LIGHT case_light_on = CASE_LIGHT_DEFAULT_ON; case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS; update_case_light(); #endif #if ENABLED(SPINDLE_LASER_ENABLE) OUT_WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off #if SPINDLE_DIR_CHANGE OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // init rotation to clockwise (M3) #endif #if ENABLED(SPINDLE_LASER_PWM) && defined(SPINDLE_LASER_PWM_PIN) && SPINDLE_LASER_PWM_PIN >= 0 SET_OUTPUT(SPINDLE_LASER_PWM_PIN); analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed #endif #endif #if HAS_BED_PROBE endstops.enable_z_probe(false); #endif #if ENABLED(USE_CONTROLLER_FAN) SET_OUTPUT(CONTROLLER_FAN_PIN); //Set pin used for driver cooling fan #endif #if HAS_STEPPER_RESET enableStepperDrivers(); #endif #if ENABLED(DIGIPOT_I2C) digipot_i2c_init(); #endif #if ENABLED(DAC_STEPPER_CURRENT) dac_init(); #endif #if (ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) && HAS_SOLENOID_1 OUT_WRITE(SOL1_PIN, LOW); // turn it off #endif #if HAS_HOME SET_INPUT_PULLUP(HOME_PIN); #endif #if PIN_EXISTS(STAT_LED_RED) OUT_WRITE(STAT_LED_RED_PIN, LOW); // turn it off #endif #if PIN_EXISTS(STAT_LED_BLUE) OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off #endif #if ENABLED(NEOPIXEL_RGBW_LED) SET_OUTPUT(NEOPIXEL_PIN); setup_neopixel(); #endif #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) SET_OUTPUT(RGB_LED_R_PIN); SET_OUTPUT(RGB_LED_G_PIN); SET_OUTPUT(RGB_LED_B_PIN); #if ENABLED(RGBW_LED) SET_OUTPUT(RGB_LED_W_PIN); #endif #endif #if ENABLED(MK2_MULTIPLEXER) SET_OUTPUT(E_MUX0_PIN); SET_OUTPUT(E_MUX1_PIN); SET_OUTPUT(E_MUX2_PIN); #endif #if HAS_FANMUX fanmux_init(); #endif lcd_init(); #ifndef CUSTOM_BOOTSCREEN_TIMEOUT #define CUSTOM_BOOTSCREEN_TIMEOUT 2500 #endif #if ENABLED(SHOW_BOOTSCREEN) #if ENABLED(DOGLCD) // On DOGM the first bootscreen is already drawn #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) safe_delay(CUSTOM_BOOTSCREEN_TIMEOUT); // Custom boot screen pause lcd_bootscreen(); // Show Marlin boot screen #endif safe_delay(BOOTSCREEN_TIMEOUT); // Pause #elif ENABLED(ULTRA_LCD) lcd_bootscreen(); #if DISABLED(SDSUPPORT) lcd_init(); #endif #endif #endif #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 // Initialize mixing to 100% color 1 for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_factor[i] = (i == 0) ? 1.0 : 0.0; for (uint8_t t = 0; t < MIXING_VIRTUAL_TOOLS; t++) for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_virtual_tool_mix[t][i] = mixing_factor[i]; #endif #if ENABLED(BLTOUCH) bltouch_init(); #endif #if ENABLED(I2C_POSITION_ENCODERS) I2CPEM.init(); #endif #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 i2c.onReceive(i2c_on_receive); i2c.onRequest(i2c_on_request); #endif #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) setup_endstop_interrupts(); #endif #if ENABLED(SWITCHING_EXTRUDER) && !DONT_SWITCH move_extruder_servo(0); // Initialize extruder servo #endif #if ENABLED(SWITCHING_NOZZLE) move_nozzle_servo(0); // Initialize nozzle servo #endif #if ENABLED(PARKING_EXTRUDER) #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT) pe_activate_magnet(0); pe_activate_magnet(1); #else pe_deactivate_magnet(0); pe_deactivate_magnet(1); #endif #endif } /** * The main Marlin program loop * * - Save or log commands to SD * - Process available commands (if not saving) * - Call heater manager * - Call inactivity manager * - Call endstop manager * - Call LCD update */ void loop() { if (commands_in_queue < BUFSIZE) get_available_commands(); #if ENABLED(SDSUPPORT) card.checkautostart(false); #endif advance_command_queue(); endstops.report_state(); idle(); }