/** * Marlin 3D Printer Firmware * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Dutch * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 #define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.") #define MSG_BACK _UxGT("Terug") #define MSG_MEDIA_INSERTED _UxGT("Kaart ingestoken") #define MSG_MEDIA_REMOVED _UxGT("Kaart verwijderd") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Hoofdmenu") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Motoren uit") #define MSG_DEBUG_MENU _UxGT("Debug Menu") //accepted English terms #define MSG_PROGRESS_BAR_TEST _UxGT("Vooruitgang Test") #define MSG_AUTO_HOME _UxGT("Auto home") #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats") #define MSG_LEVEL_BED_DONE _UxGT("Bed level kompl.") #define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets") #define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.") #define MSG_SET_ORIGIN _UxGT("Nulpunt instellen") #define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " voorverwarmen") #define MSG_PREHEAT_1_N _UxGT(PREHEAT_1_LABEL " voorverw. ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Einde") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed") #define MSG_PREHEAT_1_SETTINGS _UxGT(PREHEAT_1_LABEL " verw. conf") #define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " voorverwarmen") #define MSG_PREHEAT_2_N _UxGT(PREHEAT_2_LABEL " voorverw. ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Einde") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed") #define MSG_PREHEAT_2_SETTINGS _UxGT(PREHEAT_2_LABEL " verw. conf") #define MSG_COOLDOWN _UxGT("Afkoelen") #define MSG_SWITCH_PS_ON _UxGT("Stroom aan") #define MSG_SWITCH_PS_OFF _UxGT("Stroom uit") #define MSG_EXTRUDE _UxGT("Extrude") #define MSG_RETRACT _UxGT("Retract") #define MSG_MOVE_AXIS _UxGT("As verplaatsen") #define MSG_BED_LEVELING _UxGT("Bed Leveling") #define MSG_LEVEL_BED _UxGT("Level bed") #define MSG_MOVING _UxGT("Verplaatsen...") #define MSG_FREE_XY _UxGT("Vrij XY") #define MSG_MOVE_X _UxGT("Verplaats X") #define MSG_MOVE_Y _UxGT("Verplaats Y") #define MSG_MOVE_Z _UxGT("Verplaats Z") #define MSG_MOVE_E _UxGT("Extruder") #define MSG_MOVE_Z_DIST _UxGT("Verplaats %smm") #define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm") #define MSG_MOVE_1MM _UxGT("Verplaats 1mm") #define MSG_MOVE_10MM _UxGT("Verplaats 10mm") #define MSG_SPEED _UxGT("Snelheid") #define MSG_BED_Z _UxGT("Bed Z") #define MSG_NOZZLE _UxGT("Nozzle") #define MSG_BED _UxGT("Bed") #define MSG_FAN_SPEED _UxGT("Fan snelheid") #define MSG_FLOW _UxGT("Flow") #define MSG_CONTROL _UxGT("Control") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") #define MSG_AUTOTEMP _UxGT("Autotemp") #define MSG_LCD_ON _UxGT("Aan") #define MSG_LCD_OFF _UxGT("Uit") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Selecteer") #define MSG_ACC _UxGT("Versn") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("Va-jerk") #define MSG_VB_JERK _UxGT("Vb-jerk") #define MSG_VC_JERK _UxGT("Vc-jerk") #else #define MSG_VA_JERK _UxGT("Vx-jerk") #define MSG_VB_JERK _UxGT("Vy-jerk") #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-travel") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("Asteps/mm") #define MSG_BSTEPS _UxGT("Bsteps/mm") #define MSG_CSTEPS _UxGT("Csteps/mm") #else #define MSG_ASTEPS _UxGT("Xsteps/mm") #define MSG_BSTEPS _UxGT("Ysteps/mm") #define MSG_CSTEPS _UxGT("Zsteps/mm") #endif #define MSG_ESTEPS _UxGT("Esteps/mm") #define MSG_E1STEPS _UxGT("E1steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E6STEPS _UxGT("E6steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatuur") #define MSG_MOTION _UxGT("Beweging") #define MSG_FILAMENT _UxGT("Filament") #define MSG_ADVANCE_K _UxGT("Advance K") //accepted english dutch #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("LCD contrast") #define MSG_STORE_EEPROM _UxGT("Geheugen opslaan") #define MSG_LOAD_EEPROM _UxGT("Geheugen laden") #define MSG_RESTORE_FAILSAFE _UxGT("Noodstop reset") #define MSG_REFRESH _UxGT("Ververs") #define MSG_WATCH _UxGT("Info scherm") #define MSG_PREPARE _UxGT("Voorbereiden") #define MSG_TUNE _UxGT("Afstellen") #define MSG_PAUSE_PRINT _UxGT("Print pauzeren") #define MSG_RESUME_PRINT _UxGT("Print hervatten") #define MSG_STOP_PRINT _UxGT("Print stoppen") #define MSG_MEDIA_MENU _UxGT("Print van SD") #define MSG_NO_MEDIA _UxGT("Geen SD kaart") #define MSG_DWELL _UxGT("Slapen...") #define MSG_USERWAIT _UxGT("Wachten...") #define MSG_PRINT_ABORTED _UxGT("Print afgebroken") #define MSG_NO_MOVE _UxGT("Geen beweging.") #define MSG_KILLED _UxGT("Afgebroken. ") #define MSG_STOPPED _UxGT("Gestopt. ") #define MSG_CONTROL_RETRACT _UxGT("Retract mm") //accepted English term in Dutch #define MSG_CONTROL_RETRACT_SWAP _UxGT("Ruil Retract mm") #define MSG_CONTROL_RETRACTF _UxGT("Retract F") #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ruil UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Verv. Filament") #define MSG_INIT_MEDIA _UxGT("Init. SD kaart") #define MSG_CHANGE_MEDIA _UxGT("Verv. SD Kaart") #define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #define MSG_HOME_FIRST _UxGT("Home %s%s%s Eerst") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch #define MSG_BABYSTEP_X _UxGT("Babystap X") #define MSG_BABYSTEP_Y _UxGT("Babystap Y") #define MSG_BABYSTEP_Z _UxGT("Babystap Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop afbr.") #define MSG_HEATING_FAILED_LCD _UxGT("Voorverw. fout") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Redun. temp fout") #define MSG_THERMAL_RUNAWAY _UxGT("Therm. wegloop") #define MSG_ERR_MAXTEMP _UxGT("Err: Max. temp") #define MSG_ERR_MINTEMP _UxGT("Err: Min. temp") #define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed") #define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed") #define MSG_ERR_Z_HOMING _UxGT("Home XY Eerst") #define MSG_HALTED _UxGT("PRINTER GESTOPT") #define MSG_PLEASE_RESET _UxGT("Reset A.U.B.") #define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Voorwarmen...") #define MSG_BED_HEATING _UxGT("Bed voorverw...") #define MSG_DELTA_CALIBRATE _UxGT("Delta Calibratie") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibreer X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibreer Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibreer Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibreer Midden") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibratie") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Zet Delta Hoogte") #define MSG_INFO_STATS_MENU _UxGT("Printer Stats") #define MSG_INFO_BOARD_MENU _UxGT("Board Info") //accepted English term in Dutch #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #define MSG_INFO_EXTRUDERS _UxGT("Extruders") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_MENU _UxGT("Over Printer") #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") #define MSG_INFO_PROTOCOL _UxGT("Protocol") #define MSG_CASE_LIGHT _UxGT("Case licht") #define MSG_EXPECTED_PRINTER _UxGT("Onjuiste printer") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid") #define MSG_INFO_PRINT_TIME _UxGT("Totale Printtijd") #define MSG_INFO_PRINT_LONGEST _UxGT("Langste Printtijd") #define MSG_INFO_PRINT_FILAMENT _UxGT("Totaal Extrudeert") #else #define MSG_INFO_PRINT_COUNT _UxGT("Aantal") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Voltooid") #define MSG_INFO_PRINT_TIME _UxGT("Printtijd ") #define MSG_INFO_PRINT_LONGEST _UxGT("Langste") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("PSU") //accepted English term in Dutch #define MSG_DRIVE_STRENGTH _UxGT("Motorstroom") #define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch #define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") //accepeted English term // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 // Up to 3 lines #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor start") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament te") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("verwisselen") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament uit") #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("te laden") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nozzle verw.") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Wacht a.u.b.") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("om verder...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan") #else // LCD_HEIGHT < 4 // Up to 2 lines #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("start...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("uitladen...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Verwarmen...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...") #endif // LCD_HEIGHT < 4