This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/endstop_interrupts.h
2017-03-31 09:27:48 -05:00

206 lines
8.7 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the stepper-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate either an
* 'external interrupt' or a 'pin change interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#ifndef _ENDSTOP_INTERRUPTS_H_
#define _ENDSTOP_INTERRUPTS_H_
#include "macros.h"
/**
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
*
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
* So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
* There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
*/
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
#undef digitalPinToPCICR
#define digitalPinToPCICR(p) ( WITHIN(p, 10, 15) || \
WITHIN(p, 50, 53) || \
WITHIN(p, 62, 69) ? &PCICR : (uint8_t*)0 )
#undef digitalPinToPCICRbit
#define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
WITHIN(p, 14, 15) ? 1 : \
WITHIN(p, 62, 69) ? 2 : \
0 )
#undef digitalPinToPCMSK
#define digitalPinToPCMSK(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
WITHIN(p, 14, 15) ? &PCMSK1 : \
WITHIN(p, 62, 69) ? &PCMSK2 : \
(uint8_t *)0 )
#undef digitalPinToPCMSKbit
#define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
(p) == 14 || (p) == 51 ? 2 : \
(p) == 15 || (p) == 52 ? 1 : \
(p) == 50 ? 3 : \
(p) == 53 ? 0 : \
WITHIN(p, 62, 69) ? ((p) - 62) : \
0 )
#endif
volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail.
// Must be reset to 0 by the test function when finished.
// Install Pin change interrupt for a pin. Can be called multiple times.
void pciSetup(byte pin) {
SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin)); // enable pin
SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
}
// This is what is really done inside the interrupts.
FORCE_INLINE void endstop_ISR_worker( void ) {
e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
}
// Use one Routine to handle each group
// One ISR for all EXT-Interrupts
void endstop_ISR(void) { endstop_ISR_worker(); }
// Handlers for pin change interrupts
#ifdef PCINT0_vect
ISR(PCINT0_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT1_vect
ISR(PCINT1_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT2_vect
ISR(PCINT2_vect) { endstop_ISR_worker(); }
#endif
#ifdef PCINT3_vect
ISR(PCINT3_vect) { endstop_ISR_worker(); }
#endif
void setup_endstop_interrupts( void ) {
#if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
pciSetup(X_MAX_PIN); // assign it
#endif
#endif
#if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
pciSetup(X_MIN_PIN);
#endif
#endif
#if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable");
pciSetup(Y_MAX_PIN);
#endif
#endif
#if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
pciSetup(Y_MIN_PIN);
#endif
#endif
#if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable");
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
pciSetup(Z_MIN_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable");
pciSetup(Z2_MAX_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable");
pciSetup(Z2_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable");
pciSetup(Z_MIN_PROBE_PIN);
#endif
#endif
// If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
}
#endif //_ENDSTOP_INTERRUPTS_H_