Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item: Card Menu -> Refresh to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it. It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
963 lines
25 KiB
C
963 lines
25 KiB
C
#ifndef PINS_H
|
|
#define PINS_H
|
|
|
|
#if MOTHERBOARD == 99
|
|
#define KNOWN_BOARD 1
|
|
|
|
#define X_STEP_PIN 2
|
|
#define X_DIR_PIN 3
|
|
#define X_ENABLE_PIN -1
|
|
#define X_MIN_PIN -1
|
|
#define X_MAX_PIN 16
|
|
|
|
#define Y_STEP_PIN 5
|
|
#define Y_DIR_PIN 6
|
|
#define Y_ENABLE_PIN -1
|
|
#define Y_MIN_PIN 67
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 62
|
|
#define Z_DIR_PIN 63
|
|
#define Z_ENABLE_PIN -1
|
|
#define Z_MIN_PIN 59
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 65
|
|
#define E0_DIR_PIN 66
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN -1
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN 9
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 13
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define HEATER_BED_PIN 4
|
|
#define TEMP_BED_PIN 10
|
|
|
|
#endif /* 99 */
|
|
|
|
/****************************************************************************************
|
|
* Gen7 v1.1, v1.2, v1.3, v1.4 pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
|
|
|
|
#if MOTHERBOARD == 13
|
|
#define MOTHERBOARD 11
|
|
#define GEN7_VERSION 14 // v1.4
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 12
|
|
#define MOTHERBOARD 11
|
|
#define GEN7_VERSION 13 // v1.3
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 11
|
|
#define KNOWN_BOARD
|
|
|
|
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
|
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
|
|
|
#endif
|
|
|
|
#ifndef GEN7_VERSION
|
|
#define GEN7_VERSION 12 // v1.x
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 19
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 7
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 5
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 26
|
|
#define Z_DIR_PIN 25
|
|
#define Z_ENABLE_PIN 24
|
|
#define Z_MIN_PIN 1
|
|
#define Z_MAX_PIN 0
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 28
|
|
#define E0_DIR_PIN 27
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define TEMP_0_PIN 1
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 2
|
|
|
|
#define HEATER_0_PIN 4
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 3
|
|
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1 // SCL pin of I2C header
|
|
#define LED_PIN -1
|
|
|
|
#if (GEN7_VERSION >= 13)
|
|
// Gen7 v1.3 removed the fan pin
|
|
#define FAN_PIN -1
|
|
#else
|
|
#define FAN_PIN 31
|
|
#endif
|
|
#define PS_ON_PIN 15
|
|
|
|
#if (GEN7_VERSION < 14)
|
|
// Gen 1.3 and earlier supplied thermistor power via PS_ON
|
|
// Need to ignore the bad thermistor readings on those units
|
|
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
|
#endif
|
|
|
|
//our pin for debugging.
|
|
#define DEBUG_PIN 0
|
|
|
|
//our RS485 pins
|
|
#define TX_ENABLE_PIN 12
|
|
#define RX_ENABLE_PIN 13
|
|
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
*********
|
|
* Gen7 Alfons3 pin assignment
|
|
*
|
|
********************************************************************************
|
|
********/
|
|
/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/
|
|
|
|
#if MOTHERBOARD == 10
|
|
#define KNOWN_BOARD
|
|
|
|
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
|
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
|
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 21 //different from stanard GEN7
|
|
#define X_DIR_PIN 20 //different from stanard GEN7
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 0
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 1
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 26
|
|
#define Z_DIR_PIN 25
|
|
#define Z_ENABLE_PIN 24
|
|
#define Z_MIN_PIN 2
|
|
#define Z_MAX_PIN -1
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 28
|
|
#define E0_DIR_PIN 27
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define TEMP_0_PIN 2
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
|
|
#define HEATER_0_PIN 4
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 3 // (bed)
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN 19
|
|
//our pin for debugging.
|
|
|
|
#define DEBUG_PIN -1
|
|
|
|
//our RS485 pins
|
|
//#define TX_ENABLE_PIN 12
|
|
//#define RX_ENABLE_PIN 13
|
|
|
|
#define BEEPER -1
|
|
#define SDCARDDETECT -1
|
|
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
|
|
|
|
//Pins for 4bit LCD Support
|
|
#define LCD_PINS_RS 18
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 16
|
|
#define LCD_PINS_D5 15
|
|
#define LCD_PINS_D6 13
|
|
#define LCD_PINS_D7 14
|
|
|
|
//buttons are directly attached
|
|
#define BTN_EN1 11
|
|
#define BTN_EN2 10
|
|
#define BTN_ENC 12 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Arduino Mega pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
|
|
#define KNOWN_BOARD 1
|
|
|
|
//////////////////FIX THIS//////////////
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
|
|
// #define RAMPS_V_1_3
|
|
// #define RAMPS_V_1_0
|
|
|
|
#ifdef MOTHERBOARD == 33 || MOTHERBOARD == 34
|
|
|
|
#define X_STEP_PIN 54
|
|
#define X_DIR_PIN 55
|
|
#define X_ENABLE_PIN 38
|
|
#define X_MIN_PIN 3
|
|
#define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable.
|
|
|
|
#define Y_STEP_PIN 60
|
|
#define Y_DIR_PIN 61
|
|
#define Y_ENABLE_PIN 56
|
|
#define Y_MIN_PIN 14
|
|
#define Y_MAX_PIN 15 //15
|
|
|
|
#define Z_STEP_PIN 46
|
|
#define Z_DIR_PIN 48
|
|
#define Z_ENABLE_PIN 62
|
|
#define Z_MIN_PIN 18
|
|
#define Z_MAX_PIN 19
|
|
|
|
#define E0_STEP_PIN 26
|
|
#define E0_DIR_PIN 28
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define E1_STEP_PIN 36
|
|
#define E1_DIR_PIN 34
|
|
#define E1_ENABLE_PIN 30
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
|
|
#if MOTHERBOARD == 33
|
|
#define FAN_PIN 9 // (Sprinter config)
|
|
#else
|
|
#define FAN_PIN 4 // IO pin. Buffer needed
|
|
#endif
|
|
#define PS_ON_PIN 12
|
|
#define KILL_PIN 31
|
|
|
|
#define HEATER_0_PIN 10 // EXTRUDER 1
|
|
#if MOTHERBOARD == 33
|
|
#define HEATER_1_PIN -1
|
|
#else
|
|
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
|
|
#endif
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
|
#define TEMP_1_PIN 15 // ANALOG NUMBERING
|
|
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
|
#define HEATER_BED_PIN 8 // BED
|
|
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
|
|
|
|
#ifdef ULTRA_LCD
|
|
|
|
#ifdef NEWPANEL
|
|
//arduino pin which triggers an piezzo beeper
|
|
#define BEEPER 33 // Beeper on AUX-4
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 23
|
|
#define LCD_PINS_D5 25
|
|
#define LCD_PINS_D6 27
|
|
#define LCD_PINS_D7 29
|
|
|
|
//buttons are directly attached using AUX-2
|
|
#define BTN_EN1 44
|
|
#define BTN_EN2 42
|
|
#define BTN_ENC 64 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define SDCARDDETECT -1 // Ramps does not use this port
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
#else //old style panel with shift register
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 33 No Beeper added
|
|
|
|
//buttons are attached to a shift register
|
|
// Not wired this yet
|
|
//#define SHIFT_CLK 38
|
|
//#define SHIFT_LD 42
|
|
//#define SHIFT_OUT 40
|
|
//#define SHIFT_EN 17
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 23
|
|
#define LCD_PINS_D5 25
|
|
#define LCD_PINS_D6 27
|
|
#define LCD_PINS_D7 29
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
|
|
//bits in the shift register that carry the buttons for:
|
|
// left up center down right red
|
|
#define BL_LE 7
|
|
#define BL_UP 6
|
|
#define BL_MI 5
|
|
#define BL_DW 4
|
|
#define BL_RI 3
|
|
#define BL_ST 2
|
|
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
#endif
|
|
#endif //ULTRA_LCD
|
|
|
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
|
|
|
|
#define X_STEP_PIN 26
|
|
#define X_DIR_PIN 28
|
|
#define X_ENABLE_PIN 24
|
|
#define X_MIN_PIN 3
|
|
#define X_MAX_PIN -1 //2
|
|
|
|
#define Y_STEP_PIN 38
|
|
#define Y_DIR_PIN 40
|
|
#define Y_ENABLE_PIN 36
|
|
#define Y_MIN_PIN 16
|
|
#define Y_MAX_PIN -1 //17
|
|
|
|
#define Z_STEP_PIN 44
|
|
#define Z_DIR_PIN 46
|
|
#define Z_ENABLE_PIN 42
|
|
#define Z_MIN_PIN 18
|
|
#define Z_MAX_PIN -1 //19
|
|
|
|
#define E0_STEP_PIN 32
|
|
#define E0_DIR_PIN 34
|
|
#define E0_ENABLE_PIN 30
|
|
|
|
#define SDPOWER 48
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
|
|
|
|
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
|
#define HEATER_0_PIN 12 // RAMPS 1.0
|
|
#define HEATER_BED_PIN -1 // RAMPS 1.0
|
|
#define FAN_PIN 11 // RAMPS 1.0
|
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
|
#define HEATER_0_PIN 10 // RAMPS 1.1
|
|
#define HEATER_BED_PIN 8 // RAMPS 1.1
|
|
#define FAN_PIN 9 // RAMPS 1.1
|
|
#endif
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#endif
|
|
|
|
// SPI for Max6675 Thermocouple
|
|
|
|
#ifndef SDSUPPORT
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define MAX_SCK_PIN 52
|
|
#define MAX_MISO_PIN 50
|
|
#define MAX_MOSI_PIN 51
|
|
#define MAX6675_SS 53
|
|
#else
|
|
#define MAX6675_SS 49
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Duemilanove w/ ATMega328P pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 4
|
|
#define KNOWN_BOARD 1
|
|
|
|
#ifndef __AVR_ATmega328P__
|
|
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#define X_STEP_PIN 19
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN -1
|
|
#define X_MIN_PIN 17
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 10
|
|
#define Y_DIR_PIN 7
|
|
#define Y_ENABLE_PIN -1
|
|
#define Y_MIN_PIN 8
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 13
|
|
#define Z_DIR_PIN 3
|
|
#define Z_ENABLE_PIN 2
|
|
#define Z_MIN_PIN 4
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 11
|
|
#define E0_DIR_PIN 12
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1
|
|
#define LED_PIN -1
|
|
#define FAN_PIN 5
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 6
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define HEATER_BED_PIN -1
|
|
#define TEMP_BED_PIN -1
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Gen6 pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 5 || MOTHERBOARD == 51
|
|
#define KNOWN_BOARD 1
|
|
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
//x axis pins
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 18
|
|
#define X_ENABLE_PIN 19
|
|
#define X_MIN_PIN 20
|
|
#define X_MAX_PIN -1
|
|
|
|
//y axis pins
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_ENABLE_PIN 24
|
|
#define Y_MIN_PIN 25
|
|
#define Y_MAX_PIN -1
|
|
|
|
//z axis pins
|
|
#define Z_STEP_PIN 27
|
|
#define Z_DIR_PIN 28
|
|
#define Z_ENABLE_PIN 29
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN -1
|
|
|
|
//extruder pins
|
|
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
|
|
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
|
|
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
|
|
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
|
|
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
|
|
|
|
|
|
#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
|
|
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#if MOTHERBOARD == 5
|
|
#define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
|
|
#define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
|
|
#else
|
|
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
|
|
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
|
|
#endif
|
|
#define SDPOWER -1
|
|
#define SDSS 17
|
|
#define LED_PIN -1 //changed @ rkoeppl 20110410
|
|
#define FAN_PIN -1 //changed @ rkoeppl 20110410
|
|
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410
|
|
//our pin for debugging.
|
|
|
|
#define DEBUG_PIN 0
|
|
|
|
//our RS485 pins
|
|
#define TX_ENABLE_PIN 12
|
|
#define RX_ENABLE_PIN 13
|
|
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Sanguinololu pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 62
|
|
#undef MOTHERBOARD
|
|
#define MOTHERBOARD 6
|
|
#define SANGUINOLOLU_V_1_2
|
|
#endif
|
|
#if MOTHERBOARD == 6
|
|
#define KNOWN_BOARD 1
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 21
|
|
#define X_MIN_PIN 18
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 22
|
|
#define Y_DIR_PIN 23
|
|
#define Y_MIN_PIN 19
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 3
|
|
#define Z_DIR_PIN 2
|
|
#define Z_MIN_PIN 20
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 1
|
|
#define E0_DIR_PIN 0
|
|
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 13 // (extruder)
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
|
|
#ifdef SANGUINOLOLU_V_1_2
|
|
|
|
#define HEATER_BED_PIN 12 // (bed)
|
|
#define X_ENABLE_PIN 14
|
|
#define Y_ENABLE_PIN 14
|
|
#define Z_ENABLE_PIN 26
|
|
#define E0_ENABLE_PIN 14
|
|
|
|
#else
|
|
|
|
#define HEATER_BED_PIN 14 // (bed)
|
|
#define X_ENABLE_PIN -1
|
|
#define Y_ENABLE_PIN -1
|
|
#define Z_ENABLE_PIN -1
|
|
#define E0_ENABLE_PIN -1
|
|
|
|
#endif
|
|
|
|
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
#define SDPOWER -1
|
|
#define SDSS 31
|
|
|
|
#endif
|
|
|
|
|
|
#if MOTHERBOARD == 7
|
|
#define KNOWN_BOARD
|
|
/*****************************************************************
|
|
* Ultimaker pin assignment
|
|
******************************************************************/
|
|
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 25
|
|
#define X_DIR_PIN 23
|
|
#define X_MIN_PIN 22
|
|
#define X_MAX_PIN 24
|
|
#define X_ENABLE_PIN 27
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 33
|
|
#define Y_MIN_PIN 26
|
|
#define Y_MAX_PIN 28
|
|
#define Y_ENABLE_PIN 29
|
|
|
|
#define Z_STEP_PIN 37
|
|
#define Z_DIR_PIN 39
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN 32
|
|
#define Z_ENABLE_PIN 35
|
|
|
|
#define HEATER_BED_PIN 4
|
|
#define TEMP_BED_PIN 10
|
|
|
|
#define HEATER_0_PIN 2
|
|
#define TEMP_0_PIN 8
|
|
|
|
#define HEATER_1_PIN 3
|
|
#define TEMP_1_PIN 9
|
|
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define E0_STEP_PIN 43
|
|
#define E0_DIR_PIN 45
|
|
#define E0_ENABLE_PIN 41
|
|
|
|
#define E1_STEP_PIN 49
|
|
#define E1_DIR_PIN 47
|
|
#define E1_ENABLE_PIN 51
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define FAN_PIN 7
|
|
#define PS_ON_PIN 12
|
|
#define KILL_PIN -1
|
|
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
|
|
|
|
#ifdef ULTRA_LCD
|
|
|
|
#ifdef NEWPANEL
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 18
|
|
|
|
#define LCD_PINS_RS 20
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 16
|
|
#define LCD_PINS_D5 21
|
|
#define LCD_PINS_D6 5
|
|
#define LCD_PINS_D7 6
|
|
|
|
//buttons are directly attached
|
|
#define BTN_EN1 40
|
|
#define BTN_EN2 42
|
|
#define BTN_ENC 19 //the click
|
|
|
|
#define BLEN_C 2
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
|
|
#define SDCARDDETECT 38
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
#else //old style panel with shift register
|
|
//arduino pin witch triggers an piezzo beeper
|
|
#define BEEPER 18
|
|
|
|
//buttons are attached to a shift register
|
|
#define SHIFT_CLK 38
|
|
#define SHIFT_LD 42
|
|
#define SHIFT_OUT 40
|
|
#define SHIFT_EN 17
|
|
|
|
#define LCD_PINS_RS 16
|
|
#define LCD_PINS_ENABLE 5
|
|
#define LCD_PINS_D4 6
|
|
#define LCD_PINS_D5 21
|
|
#define LCD_PINS_D6 20
|
|
#define LCD_PINS_D7 19
|
|
|
|
//encoder rotation values
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
|
|
|
|
//bits in the shift register that carry the buttons for:
|
|
// left up center down right red
|
|
#define BL_LE 7
|
|
#define BL_UP 6
|
|
#define BL_MI 5
|
|
#define BL_DW 4
|
|
#define BL_RI 3
|
|
#define BL_ST 2
|
|
|
|
#define BLEN_B 1
|
|
#define BLEN_A 0
|
|
#endif
|
|
#endif //ULTRA_LCD
|
|
|
|
#endif
|
|
|
|
#if MOTHERBOARD == 71
|
|
#define KNOWN_BOARD
|
|
/*****************************************************************
|
|
* Ultimaker pin assignment (Old electronics)
|
|
******************************************************************/
|
|
|
|
#ifndef __AVR_ATmega1280__
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 25
|
|
#define X_DIR_PIN 23
|
|
#define X_MIN_PIN 15
|
|
#define X_MAX_PIN 14
|
|
#define X_ENABLE_PIN 27
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 33
|
|
#define Y_MIN_PIN 17
|
|
#define Y_MAX_PIN 16
|
|
#define Y_ENABLE_PIN 29
|
|
|
|
#define Z_STEP_PIN 37
|
|
#define Z_DIR_PIN 39
|
|
#define Z_MIN_PIN 19
|
|
#define Z_MAX_PIN 18
|
|
#define Z_ENABLE_PIN 35
|
|
|
|
#define HEATER_BED_PIN -1
|
|
#define TEMP_BED_PIN -1
|
|
|
|
#define HEATER_0_PIN 2
|
|
#define TEMP_0_PIN 8
|
|
|
|
#define HEATER_1_PIN 1
|
|
#define TEMP_1_PIN 1
|
|
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define E0_STEP_PIN 43
|
|
#define E0_DIR_PIN 45
|
|
#define E0_ENABLE_PIN 41
|
|
|
|
#define E1_STEP_PIN -1
|
|
#define E1_DIR_PIN -1
|
|
#define E1_ENABLE_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS -1
|
|
#define LED_PIN -1
|
|
#define FAN_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
|
|
|
|
#define LCD_PINS_RS 24
|
|
#define LCD_PINS_ENABLE 22
|
|
#define LCD_PINS_D4 36
|
|
#define LCD_PINS_D5 34
|
|
#define LCD_PINS_D6 32
|
|
#define LCD_PINS_D7 30
|
|
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Teensylu 0.7 pin assingments (ATMEGA90USB)
|
|
* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 8
|
|
#define MOTHERBOARD 8
|
|
#define KNOWN_BOARD 1
|
|
|
|
|
|
#define X_STEP_PIN 0
|
|
#define X_DIR_PIN 1
|
|
#define X_ENABLE_PIN 39
|
|
#define X_MIN_PIN 13
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 2
|
|
#define Y_DIR_PIN 3
|
|
#define Y_ENABLE_PIN 38
|
|
#define Y_MIN_PIN 14
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 4
|
|
#define Z_DIR_PIN 5
|
|
#define Z_ENABLE_PIN 23
|
|
#define Z_MIN_PIN 15
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 6
|
|
#define E0_DIR_PIN 7
|
|
#define E0_ENABLE_PIN 19
|
|
|
|
|
|
|
|
#define HEATER_0_PIN 21 // Extruder
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 20 // Bed
|
|
#define FAN_PIN 22 // Fan
|
|
|
|
#define TEMP_0_PIN 7 // Extruder
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 6 // Bed
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 8
|
|
#define LED_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define ALARM_PIN -1
|
|
|
|
#ifndef SDSUPPORT
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define SCK_PIN 9
|
|
#define MISO_PIN 11
|
|
#define MOSI_PIN 10
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************************
|
|
* Gen3+ pin assignment
|
|
*
|
|
****************************************************************************************/
|
|
#if MOTHERBOARD == 9
|
|
#define MOTHERBOARD 6
|
|
#define KNOWN_BOARD 1
|
|
#ifndef __AVR_ATmega644P__
|
|
#ifndef __AVR_ATmega1284P__
|
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
#endif
|
|
|
|
#define X_STEP_PIN 15
|
|
#define X_DIR_PIN 18
|
|
#define X_MIN_PIN 20
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN 23
|
|
#define Y_DIR_PIN 22
|
|
#define Y_MIN_PIN 25
|
|
#define Y_MAX_PIN -1
|
|
|
|
#define Z_STEP_PIN 27
|
|
#define Z_DIR_PIN 28
|
|
#define Z_MIN_PIN 30
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E_STEP_PIN 17
|
|
#define E_DIR_PIN 21
|
|
|
|
#define LED_PIN -1
|
|
|
|
#define FAN_PIN -1
|
|
|
|
#define PS_ON_PIN 14
|
|
#define KILL_PIN -1
|
|
|
|
#define HEATER_0_PIN 12 // (extruder)
|
|
|
|
#define HEATER_1_PIN 16 // (bed)
|
|
#define X_ENABLE_PIN 19
|
|
#define Y_ENABLE_PIN 24
|
|
#define Z_ENABLE_PIN 29
|
|
#define E_ENABLE_PIN 13
|
|
|
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
|
#define TEMP_1_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
|
#define TEMP_2_PIN -1
|
|
#define SDPOWER -1
|
|
#define SDSS 4
|
|
#define HEATER_2_PIN -1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef KNOWN_BOARD
|
|
#error Unknown MOTHERBOARD value in configuration.h
|
|
#endif
|
|
|
|
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
|
|
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN
|
|
#if EXTRUDERS == 3
|
|
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
|
|
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN
|
|
#elif EXTRUDERS == 2
|
|
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
|
|
#define _E2_PINS -1
|
|
#elif EXTRUDERS == 1
|
|
#define _E1_PINS -1
|
|
#define _E2_PINS -1
|
|
#else
|
|
#error Unsupported number of extruders
|
|
#endif
|
|
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \
|
|
HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, \
|
|
HEATER_BED_PIN, FAN_PIN, \
|
|
_E0_PINS, _E1_PINS, _E2_PINS, \
|
|
TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN }
|
|
#endif
|