This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/src/pins/pins_MINIRAMBO.h
2018-06-07 16:46:13 -05:00

191 lines
4.3 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Mini-Rambo pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Rambo' selected from the 'Tools -> Boards' menu."
#endif
#if MB(MINIRAMBO_10A)
#define BOARD_NAME "Mini Rambo 1.0a"
#else
#define BOARD_NAME "Mini Rambo"
#endif
//
// Limit Switches
//
#define X_MIN_PIN 12
#define X_MAX_PIN 30
#define Y_MIN_PIN 11
#define Y_MAX_PIN 24
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 23
#endif
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 3
#define HEATER_1_PIN 7
#if !MB(MINIRAMBO_10A)
#define HEATER_2_PIN 6
#endif
#define HEATER_BED_PIN 4
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#if !MB(MINIRAMBO_10A)
#define CASE_LIGHT_PIN 9
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
// use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19
//
// Průša i3 MK2 Multiplexer Support
//
#define E_MUX0_PIN 17
#define E_MUX1_PIN 16
#if !MB(MINIRAMBO_10A)
#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
#endif
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
#if !MB(MINIRAMBO_10A)
#define KILL_PIN 32
#endif
#if ENABLED(NEWPANEL)
#if MB(MINIRAMBO_10A)
#define BEEPER_PIN 78
#define BTN_EN1 80
#define BTN_EN2 73
#define BTN_ENC 21
#define LCD_PINS_RS 38
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 14
#define LCD_PINS_D5 15
#define LCD_PINS_D6 32
#define LCD_PINS_D7 31
#define SD_DETECT_PIN 72
#else // !MINIRAMBO_10A
// AUX-4
#define BEEPER_PIN 84
// AUX-2
#define BTN_EN1 14
#define BTN_EN2 72
#define BTN_ENC 9
#define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
#define SD_DETECT_PIN 15
#endif // !MINIRAMBO_10A
#endif // NEWPANEL
#endif // ULTRA_LCD