3569 lines
106 KiB
C++
3569 lines
106 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* configuration_store.cpp
|
|
*
|
|
* Settings and EEPROM storage
|
|
*
|
|
* IMPORTANT: Whenever there are changes made to the variables stored in EEPROM
|
|
* in the functions below, also increment the version number. This makes sure that
|
|
* the default values are used whenever there is a change to the data, to prevent
|
|
* wrong data being written to the variables.
|
|
*
|
|
* ALSO: Variables in the Store and Retrieve sections must be in the same order.
|
|
* If a feature is disabled, some data must still be written that, when read,
|
|
* either sets a Sane Default, or results in No Change to the existing value.
|
|
*
|
|
*/
|
|
|
|
// Change EEPROM version if the structure changes
|
|
#define EEPROM_VERSION "V78"
|
|
#define EEPROM_OFFSET 100
|
|
|
|
// Check the integrity of data offsets.
|
|
// Can be disabled for production build.
|
|
//#define DEBUG_EEPROM_READWRITE
|
|
|
|
#include "configuration_store.h"
|
|
|
|
#include "endstops.h"
|
|
#include "planner.h"
|
|
#include "stepper.h"
|
|
#include "temperature.h"
|
|
#include "../lcd/ultralcd.h"
|
|
#include "../libs/vector_3.h" // for matrix_3x3
|
|
#include "../gcode/gcode.h"
|
|
#include "../MarlinCore.h"
|
|
|
|
#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
|
|
#include "../HAL/shared/eeprom_api.h"
|
|
#endif
|
|
|
|
#include "probe.h"
|
|
|
|
#if HAS_LEVELING
|
|
#include "../feature/bedlevel/bedlevel.h"
|
|
#endif
|
|
|
|
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
|
#include "../feature/z_stepper_align.h"
|
|
#endif
|
|
|
|
#if ENABLED(EXTENSIBLE_UI)
|
|
#include "../lcd/extui/ui_api.h"
|
|
#endif
|
|
|
|
#if HAS_SERVOS
|
|
#include "servo.h"
|
|
#endif
|
|
|
|
#if HAS_SERVOS && HAS_SERVO_ANGLES
|
|
#define EEPROM_NUM_SERVOS NUM_SERVOS
|
|
#else
|
|
#define EEPROM_NUM_SERVOS NUM_SERVO_PLUGS
|
|
#endif
|
|
|
|
#include "../feature/fwretract.h"
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
#include "../feature/powerloss.h"
|
|
#endif
|
|
|
|
#include "../feature/pause.h"
|
|
|
|
#if ENABLED(BACKLASH_COMPENSATION)
|
|
#include "../feature/backlash.h"
|
|
#endif
|
|
|
|
#if HAS_FILAMENT_SENSOR
|
|
#include "../feature/runout.h"
|
|
#endif
|
|
|
|
#if ENABLED(EXTRA_LIN_ADVANCE_K)
|
|
extern float other_extruder_advance_K[EXTRUDERS];
|
|
#endif
|
|
|
|
#if EXTRUDERS > 1
|
|
#include "tool_change.h"
|
|
void M217_report(const bool eeprom);
|
|
#endif
|
|
|
|
#if ENABLED(BLTOUCH)
|
|
#include "../feature/bltouch.h"
|
|
#endif
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
#include "stepper/indirection.h"
|
|
#include "../feature/tmc_util.h"
|
|
#endif
|
|
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
#include "../feature/probe_temp_comp.h"
|
|
#endif
|
|
|
|
#include "../feature/controllerfan.h"
|
|
#if ENABLED(CONTROLLER_FAN_EDITABLE)
|
|
void M710_report(const bool forReplay);
|
|
#endif
|
|
|
|
#if ENABLED(CASE_LIGHT_MENU) && DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
|
|
#include "../feature/caselight.h"
|
|
#define HAS_CASE_LIGHT_BRIGHTNESS 1
|
|
#endif
|
|
|
|
#pragma pack(push, 1) // No padding between variables
|
|
|
|
typedef struct { uint16_t X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7; } tmc_stepper_current_t;
|
|
typedef struct { uint32_t X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7; } tmc_hybrid_threshold_t;
|
|
typedef struct { int16_t X, Y, Z, X2, Y2, Z2, Z3, Z4; } tmc_sgt_t;
|
|
typedef struct { bool X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7; } tmc_stealth_enabled_t;
|
|
|
|
// Limit an index to an array size
|
|
#define ALIM(I,ARR) _MIN(I, COUNT(ARR) - 1)
|
|
|
|
// Defaults for reset / fill in on load
|
|
static const uint32_t _DMA[] PROGMEM = DEFAULT_MAX_ACCELERATION;
|
|
static const float _DASU[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT;
|
|
static const feedRate_t _DMF[] PROGMEM = DEFAULT_MAX_FEEDRATE;
|
|
|
|
extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[];
|
|
|
|
/**
|
|
* Current EEPROM Layout
|
|
*
|
|
* Keep this data structure up to date so
|
|
* EEPROM size is known at compile time!
|
|
*/
|
|
typedef struct SettingsDataStruct {
|
|
char version[4]; // Vnn\0
|
|
uint16_t crc; // Data Checksum
|
|
|
|
//
|
|
// DISTINCT_E_FACTORS
|
|
//
|
|
uint8_t esteppers; // XYZE_N - XYZ
|
|
|
|
planner_settings_t planner_settings;
|
|
|
|
xyze_float_t planner_max_jerk; // M205 XYZE planner.max_jerk
|
|
float planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm
|
|
|
|
xyz_pos_t home_offset; // M206 XYZ / M665 TPZ
|
|
|
|
#if HAS_HOTEND_OFFSET
|
|
xyz_pos_t hotend_offset[HOTENDS - 1]; // M218 XYZ
|
|
#endif
|
|
|
|
//
|
|
// FILAMENT_RUNOUT_SENSOR
|
|
//
|
|
bool runout_sensor_enabled; // M412 S
|
|
float runout_distance_mm; // M412 D
|
|
|
|
//
|
|
// ENABLE_LEVELING_FADE_HEIGHT
|
|
//
|
|
float planner_z_fade_height; // M420 Zn planner.z_fade_height
|
|
|
|
//
|
|
// MESH_BED_LEVELING
|
|
//
|
|
float mbl_z_offset; // mbl.z_offset
|
|
uint8_t mesh_num_x, mesh_num_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
|
|
float mbl_z_values[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3)] // mbl.z_values
|
|
[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3)];
|
|
|
|
//
|
|
// HAS_BED_PROBE
|
|
//
|
|
|
|
xyz_pos_t probe_offset;
|
|
|
|
//
|
|
// ABL_PLANAR
|
|
//
|
|
matrix_3x3 planner_bed_level_matrix; // planner.bed_level_matrix
|
|
|
|
//
|
|
// AUTO_BED_LEVELING_BILINEAR
|
|
//
|
|
uint8_t grid_max_x, grid_max_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
|
|
xy_pos_t bilinear_grid_spacing, bilinear_start; // G29 L F
|
|
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
bed_mesh_t z_values; // G29
|
|
#else
|
|
float z_values[3][3];
|
|
#endif
|
|
|
|
//
|
|
// AUTO_BED_LEVELING_UBL
|
|
//
|
|
bool planner_leveling_active; // M420 S planner.leveling_active
|
|
int8_t ubl_storage_slot; // ubl.storage_slot
|
|
|
|
//
|
|
// SERVO_ANGLES
|
|
//
|
|
uint16_t servo_angles[EEPROM_NUM_SERVOS][2]; // M281 P L U
|
|
|
|
//
|
|
// Temperature first layer compensation values
|
|
//
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
int16_t z_offsets_probe[COUNT(temp_comp.z_offsets_probe)], // M871 P I V
|
|
z_offsets_bed[COUNT(temp_comp.z_offsets_bed)] // M871 B I V
|
|
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
|
|
, z_offsets_ext[COUNT(temp_comp.z_offsets_ext)] // M871 E I V
|
|
#endif
|
|
;
|
|
#endif
|
|
|
|
//
|
|
// BLTOUCH
|
|
//
|
|
bool bltouch_last_written_mode;
|
|
|
|
//
|
|
// DELTA / [XYZ]_DUAL_ENDSTOPS
|
|
//
|
|
#if ENABLED(DELTA)
|
|
float delta_height; // M666 H
|
|
abc_float_t delta_endstop_adj; // M666 XYZ
|
|
float delta_radius, // M665 R
|
|
delta_diagonal_rod, // M665 L
|
|
delta_segments_per_second; // M665 S
|
|
abc_float_t delta_tower_angle_trim; // M665 XYZ
|
|
#elif HAS_EXTRA_ENDSTOPS
|
|
float x2_endstop_adj, // M666 X
|
|
y2_endstop_adj, // M666 Y
|
|
z2_endstop_adj, // M666 (S2) Z
|
|
z3_endstop_adj, // M666 (S3) Z
|
|
z4_endstop_adj; // M666 (S4) Z
|
|
#endif
|
|
|
|
//
|
|
// Z_STEPPER_AUTO_ALIGN, Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
|
|
//
|
|
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
|
xy_pos_t z_stepper_align_xy[NUM_Z_STEPPER_DRIVERS]; // M422 S X Y
|
|
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
|
xy_pos_t z_stepper_align_stepper_xy[NUM_Z_STEPPER_DRIVERS]; // M422 W X Y
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// ULTIPANEL
|
|
//
|
|
int16_t ui_preheat_hotend_temp[2], // M145 S0 H
|
|
ui_preheat_bed_temp[2]; // M145 S0 B
|
|
uint8_t ui_preheat_fan_speed[2]; // M145 S0 F
|
|
|
|
//
|
|
// PIDTEMP
|
|
//
|
|
PIDCF_t hotendPID[HOTENDS]; // M301 En PIDCF / M303 En U
|
|
int16_t lpq_len; // M301 L
|
|
|
|
//
|
|
// PIDTEMPBED
|
|
//
|
|
PID_t bedPID; // M304 PID / M303 E-1 U
|
|
|
|
//
|
|
// User-defined Thermistors
|
|
//
|
|
#if HAS_USER_THERMISTORS
|
|
user_thermistor_t user_thermistor[USER_THERMISTORS]; // M305 P0 R4700 T100000 B3950
|
|
#endif
|
|
|
|
//
|
|
// HAS_LCD_CONTRAST
|
|
//
|
|
int16_t lcd_contrast; // M250 C
|
|
|
|
//
|
|
// Controller fan settings
|
|
//
|
|
controllerFan_settings_t controllerFan_settings; // M710
|
|
|
|
//
|
|
// POWER_LOSS_RECOVERY
|
|
//
|
|
bool recovery_enabled; // M413 S
|
|
|
|
//
|
|
// FWRETRACT
|
|
//
|
|
fwretract_settings_t fwretract_settings; // M207 S F Z W, M208 S F W R
|
|
bool autoretract_enabled; // M209 S
|
|
|
|
//
|
|
// !NO_VOLUMETRIC
|
|
//
|
|
bool parser_volumetric_enabled; // M200 D parser.volumetric_enabled
|
|
float planner_filament_size[EXTRUDERS]; // M200 T D planner.filament_size[]
|
|
|
|
//
|
|
// HAS_TRINAMIC_CONFIG
|
|
//
|
|
tmc_stepper_current_t tmc_stepper_current; // M906 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
|
|
tmc_hybrid_threshold_t tmc_hybrid_threshold; // M913 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
|
|
tmc_sgt_t tmc_sgt; // M914 X Y Z X2 Y2 Z2 Z3 Z4
|
|
tmc_stealth_enabled_t tmc_stealth_enabled; // M569 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
|
|
|
|
//
|
|
// LIN_ADVANCE
|
|
//
|
|
float planner_extruder_advance_K[_MAX(EXTRUDERS, 1)]; // M900 K planner.extruder_advance_K
|
|
|
|
//
|
|
// HAS_MOTOR_CURRENT_PWM
|
|
//
|
|
uint32_t motor_current_setting[3]; // M907 X Z E
|
|
|
|
//
|
|
// CNC_COORDINATE_SYSTEMS
|
|
//
|
|
xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS]; // G54-G59.3
|
|
|
|
//
|
|
// SKEW_CORRECTION
|
|
//
|
|
skew_factor_t planner_skew_factor; // M852 I J K planner.skew_factor
|
|
|
|
//
|
|
// ADVANCED_PAUSE_FEATURE
|
|
//
|
|
#if EXTRUDERS
|
|
fil_change_settings_t fc_settings[EXTRUDERS]; // M603 T U L
|
|
#endif
|
|
|
|
//
|
|
// Tool-change settings
|
|
//
|
|
#if EXTRUDERS > 1
|
|
toolchange_settings_t toolchange_settings; // M217 S P R
|
|
#endif
|
|
|
|
//
|
|
// BACKLASH_COMPENSATION
|
|
//
|
|
xyz_float_t backlash_distance_mm; // M425 X Y Z
|
|
uint8_t backlash_correction; // M425 F
|
|
float backlash_smoothing_mm; // M425 S
|
|
|
|
//
|
|
// EXTENSIBLE_UI
|
|
//
|
|
#if ENABLED(EXTENSIBLE_UI)
|
|
// This is a significant hardware change; don't reserve space when not present
|
|
uint8_t extui_data[ExtUI::eeprom_data_size];
|
|
#endif
|
|
|
|
//
|
|
// HAS_CASE_LIGHT_BRIGHTNESS
|
|
//
|
|
#if HAS_CASE_LIGHT_BRIGHTNESS
|
|
uint8_t case_light_brightness;
|
|
#endif
|
|
|
|
} SettingsData;
|
|
|
|
//static_assert(sizeof(SettingsData) <= E2END + 1, "EEPROM too small to contain SettingsData!");
|
|
|
|
MarlinSettings settings;
|
|
|
|
uint16_t MarlinSettings::datasize() { return sizeof(SettingsData); }
|
|
|
|
/**
|
|
* Post-process after Retrieve or Reset
|
|
*/
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
float new_z_fade_height;
|
|
#endif
|
|
|
|
void MarlinSettings::postprocess() {
|
|
xyze_pos_t oldpos = current_position;
|
|
|
|
// steps per s2 needs to be updated to agree with units per s2
|
|
planner.reset_acceleration_rates();
|
|
|
|
// Make sure delta kinematics are updated before refreshing the
|
|
// planner position so the stepper counts will be set correctly.
|
|
TERN_(DELTA, recalc_delta_settings());
|
|
|
|
TERN_(PIDTEMP, thermalManager.updatePID());
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
planner.calculate_volumetric_multipliers();
|
|
#elif EXTRUDERS
|
|
for (uint8_t i = COUNT(planner.e_factor); i--;)
|
|
planner.refresh_e_factor(i);
|
|
#endif
|
|
|
|
// Software endstops depend on home_offset
|
|
LOOP_XYZ(i) {
|
|
update_workspace_offset((AxisEnum)i);
|
|
update_software_endstops((AxisEnum)i);
|
|
}
|
|
|
|
TERN_(ENABLE_LEVELING_FADE_HEIGHT, set_z_fade_height(new_z_fade_height, false)); // false = no report
|
|
|
|
TERN_(AUTO_BED_LEVELING_BILINEAR, refresh_bed_level());
|
|
|
|
TERN_(HAS_MOTOR_CURRENT_PWM, stepper.refresh_motor_power());
|
|
|
|
TERN_(FWRETRACT, fwretract.refresh_autoretract());
|
|
|
|
TERN_(HAS_LINEAR_E_JERK, planner.recalculate_max_e_jerk());
|
|
|
|
TERN_(HAS_CASE_LIGHT_BRIGHTNESS, update_case_light());
|
|
|
|
// Refresh steps_to_mm with the reciprocal of axis_steps_per_mm
|
|
// and init stepper.count[], planner.position[] with current_position
|
|
planner.refresh_positioning();
|
|
|
|
// Various factors can change the current position
|
|
if (oldpos != current_position)
|
|
report_current_position();
|
|
}
|
|
|
|
#if BOTH(PRINTCOUNTER, EEPROM_SETTINGS)
|
|
#include "printcounter.h"
|
|
static_assert(
|
|
!WITHIN(STATS_EEPROM_ADDRESS, EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)) &&
|
|
!WITHIN(STATS_EEPROM_ADDRESS + sizeof(printStatistics), EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)),
|
|
"STATS_EEPROM_ADDRESS collides with EEPROM settings storage."
|
|
);
|
|
#endif
|
|
|
|
#if ENABLED(SD_FIRMWARE_UPDATE)
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
static_assert(
|
|
!WITHIN(SD_FIRMWARE_UPDATE_EEPROM_ADDR, EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)),
|
|
"SD_FIRMWARE_UPDATE_EEPROM_ADDR collides with EEPROM settings storage."
|
|
);
|
|
#endif
|
|
|
|
bool MarlinSettings::sd_update_status() {
|
|
uint8_t val;
|
|
persistentStore.read_data(SD_FIRMWARE_UPDATE_EEPROM_ADDR, &val);
|
|
return (val == SD_FIRMWARE_UPDATE_ACTIVE_VALUE);
|
|
}
|
|
|
|
bool MarlinSettings::set_sd_update_status(const bool enable) {
|
|
if (enable != sd_update_status())
|
|
persistentStore.write_data(
|
|
SD_FIRMWARE_UPDATE_EEPROM_ADDR,
|
|
enable ? SD_FIRMWARE_UPDATE_ACTIVE_VALUE : SD_FIRMWARE_UPDATE_INACTIVE_VALUE
|
|
);
|
|
return true;
|
|
}
|
|
|
|
#endif // SD_FIRMWARE_UPDATE
|
|
|
|
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
|
|
static_assert(
|
|
EEPROM_OFFSET + sizeof(SettingsData) < ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE,
|
|
"ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE is insufficient to capture all EEPROM data."
|
|
);
|
|
#endif
|
|
|
|
#define DEBUG_OUT ENABLED(EEPROM_CHITCHAT)
|
|
#include "../core/debug_out.h"
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
|
|
#define EEPROM_START() if (!persistentStore.access_start()) { SERIAL_ECHO_MSG("No EEPROM."); return false; } \
|
|
int eeprom_index = EEPROM_OFFSET
|
|
#define EEPROM_FINISH() persistentStore.access_finish()
|
|
#define EEPROM_SKIP(VAR) (eeprom_index += sizeof(VAR))
|
|
#define EEPROM_WRITE(VAR) do{ persistentStore.write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); }while(0)
|
|
#define EEPROM_READ(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, !validating); }while(0)
|
|
#define EEPROM_READ_ALWAYS(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); }while(0)
|
|
#define EEPROM_ASSERT(TST,ERR) do{ if (!(TST)) { SERIAL_ERROR_MSG(ERR); eeprom_error = true; } }while(0)
|
|
|
|
#if ENABLED(DEBUG_EEPROM_READWRITE)
|
|
#define _FIELD_TEST(FIELD) \
|
|
EEPROM_ASSERT( \
|
|
eeprom_error || eeprom_index == offsetof(SettingsData, FIELD) + EEPROM_OFFSET, \
|
|
"Field " STRINGIFY(FIELD) " mismatch." \
|
|
)
|
|
#else
|
|
#define _FIELD_TEST(FIELD) NOOP
|
|
#endif
|
|
|
|
const char version[4] = EEPROM_VERSION;
|
|
|
|
bool MarlinSettings::eeprom_error, MarlinSettings::validating;
|
|
|
|
bool MarlinSettings::size_error(const uint16_t size) {
|
|
if (size != datasize()) {
|
|
DEBUG_ERROR_MSG("EEPROM datasize error.");
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* M500 - Store Configuration
|
|
*/
|
|
bool MarlinSettings::save() {
|
|
float dummyf = 0;
|
|
char ver[4] = "ERR";
|
|
|
|
uint16_t working_crc = 0;
|
|
|
|
EEPROM_START();
|
|
|
|
eeprom_error = false;
|
|
|
|
// Write or Skip version. (Flash doesn't allow rewrite without erase.)
|
|
TERN(FLASH_EEPROM_EMULATION, EEPROM_SKIP, EEPROM_WRITE)(ver);
|
|
|
|
EEPROM_SKIP(working_crc); // Skip the checksum slot
|
|
|
|
working_crc = 0; // clear before first "real data"
|
|
|
|
_FIELD_TEST(esteppers);
|
|
|
|
const uint8_t esteppers = COUNT(planner.settings.axis_steps_per_mm) - XYZ;
|
|
EEPROM_WRITE(esteppers);
|
|
|
|
//
|
|
// Planner Motion
|
|
//
|
|
{
|
|
EEPROM_WRITE(planner.settings);
|
|
|
|
#if HAS_CLASSIC_JERK
|
|
EEPROM_WRITE(planner.max_jerk);
|
|
#if HAS_LINEAR_E_JERK
|
|
dummyf = float(DEFAULT_EJERK);
|
|
EEPROM_WRITE(dummyf);
|
|
#endif
|
|
#else
|
|
const xyze_pos_t planner_max_jerk = { 10, 10, 0.4, float(DEFAULT_EJERK) };
|
|
EEPROM_WRITE(planner_max_jerk);
|
|
#endif
|
|
|
|
TERN_(CLASSIC_JERK, dummyf = 0.02f);
|
|
EEPROM_WRITE(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
|
|
}
|
|
|
|
//
|
|
// Home Offset
|
|
//
|
|
{
|
|
_FIELD_TEST(home_offset);
|
|
|
|
#if HAS_SCARA_OFFSET
|
|
EEPROM_WRITE(scara_home_offset);
|
|
#else
|
|
#if !HAS_HOME_OFFSET
|
|
const xyz_pos_t home_offset{0};
|
|
#endif
|
|
EEPROM_WRITE(home_offset);
|
|
#endif
|
|
|
|
#if HAS_HOTEND_OFFSET
|
|
// Skip hotend 0 which must be 0
|
|
LOOP_S_L_N(e, 1, HOTENDS)
|
|
EEPROM_WRITE(hotend_offset[e]);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Filament Runout Sensor
|
|
//
|
|
{
|
|
#if HAS_FILAMENT_SENSOR
|
|
const bool &runout_sensor_enabled = runout.enabled;
|
|
#else
|
|
constexpr bool runout_sensor_enabled = true;
|
|
#endif
|
|
#if HAS_FILAMENT_SENSOR && defined(FILAMENT_RUNOUT_DISTANCE_MM)
|
|
const float &runout_distance_mm = runout.runout_distance();
|
|
#else
|
|
constexpr float runout_distance_mm = 0;
|
|
#endif
|
|
_FIELD_TEST(runout_sensor_enabled);
|
|
EEPROM_WRITE(runout_sensor_enabled);
|
|
EEPROM_WRITE(runout_distance_mm);
|
|
}
|
|
|
|
//
|
|
// Global Leveling
|
|
//
|
|
{
|
|
const float zfh = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.z_fade_height, 10.0f);
|
|
EEPROM_WRITE(zfh);
|
|
}
|
|
|
|
//
|
|
// Mesh Bed Leveling
|
|
//
|
|
{
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
static_assert(
|
|
sizeof(mbl.z_values) == (GRID_MAX_POINTS) * sizeof(mbl.z_values[0][0]),
|
|
"MBL Z array is the wrong size."
|
|
);
|
|
#else
|
|
dummyf = 0;
|
|
#endif
|
|
|
|
const uint8_t mesh_num_x = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3),
|
|
mesh_num_y = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3);
|
|
|
|
EEPROM_WRITE(TERN(MESH_BED_LEVELING, mbl.z_offset, dummyf));
|
|
EEPROM_WRITE(mesh_num_x);
|
|
EEPROM_WRITE(mesh_num_y);
|
|
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
EEPROM_WRITE(mbl.z_values);
|
|
#else
|
|
for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummyf);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Probe XYZ Offsets
|
|
//
|
|
{
|
|
_FIELD_TEST(probe_offset);
|
|
#if HAS_BED_PROBE
|
|
const xyz_pos_t &zpo = probe.offset;
|
|
#else
|
|
constexpr xyz_pos_t zpo{0};
|
|
#endif
|
|
EEPROM_WRITE(zpo);
|
|
}
|
|
|
|
//
|
|
// Planar Bed Leveling matrix
|
|
//
|
|
{
|
|
#if ABL_PLANAR
|
|
EEPROM_WRITE(planner.bed_level_matrix);
|
|
#else
|
|
dummyf = 0;
|
|
for (uint8_t q = 9; q--;) EEPROM_WRITE(dummyf);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Bilinear Auto Bed Leveling
|
|
//
|
|
{
|
|
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
static_assert(
|
|
sizeof(z_values) == (GRID_MAX_POINTS) * sizeof(z_values[0][0]),
|
|
"Bilinear Z array is the wrong size."
|
|
);
|
|
#else
|
|
const xy_pos_t bilinear_start{0}, bilinear_grid_spacing{0};
|
|
#endif
|
|
|
|
const uint8_t grid_max_x = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_X, 3),
|
|
grid_max_y = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_Y, 3);
|
|
EEPROM_WRITE(grid_max_x);
|
|
EEPROM_WRITE(grid_max_y);
|
|
EEPROM_WRITE(bilinear_grid_spacing);
|
|
EEPROM_WRITE(bilinear_start);
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
EEPROM_WRITE(z_values); // 9-256 floats
|
|
#else
|
|
dummyf = 0;
|
|
for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummyf);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Unified Bed Leveling
|
|
//
|
|
{
|
|
_FIELD_TEST(planner_leveling_active);
|
|
const bool ubl_active = TERN(AUTO_BED_LEVELING_UBL, planner.leveling_active, false);
|
|
const int8_t storage_slot = TERN(AUTO_BED_LEVELING_UBL, ubl.storage_slot, -1);
|
|
EEPROM_WRITE(ubl_active);
|
|
EEPROM_WRITE(storage_slot);
|
|
}
|
|
|
|
//
|
|
// Servo Angles
|
|
//
|
|
{
|
|
_FIELD_TEST(servo_angles);
|
|
#if !HAS_SERVO_ANGLES
|
|
uint16_t servo_angles[EEPROM_NUM_SERVOS][2] = { { 0, 0 } };
|
|
#endif
|
|
EEPROM_WRITE(servo_angles);
|
|
}
|
|
|
|
//
|
|
// Thermal first layer compensation values
|
|
//
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
EEPROM_WRITE(temp_comp.z_offsets_probe);
|
|
EEPROM_WRITE(temp_comp.z_offsets_bed);
|
|
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
|
|
EEPROM_WRITE(temp_comp.z_offsets_ext);
|
|
#endif
|
|
#else
|
|
// No placeholder data for this feature
|
|
#endif
|
|
|
|
//
|
|
// BLTOUCH
|
|
//
|
|
{
|
|
_FIELD_TEST(bltouch_last_written_mode);
|
|
const bool bltouch_last_written_mode = TERN(BLTOUCH, bltouch.last_written_mode, false);
|
|
EEPROM_WRITE(bltouch_last_written_mode);
|
|
}
|
|
|
|
//
|
|
// DELTA Geometry or Dual Endstops offsets
|
|
//
|
|
{
|
|
#if ENABLED(DELTA)
|
|
|
|
_FIELD_TEST(delta_height);
|
|
|
|
EEPROM_WRITE(delta_height); // 1 float
|
|
EEPROM_WRITE(delta_endstop_adj); // 3 floats
|
|
EEPROM_WRITE(delta_radius); // 1 float
|
|
EEPROM_WRITE(delta_diagonal_rod); // 1 float
|
|
EEPROM_WRITE(delta_segments_per_second); // 1 float
|
|
EEPROM_WRITE(delta_tower_angle_trim); // 3 floats
|
|
|
|
#elif HAS_EXTRA_ENDSTOPS
|
|
|
|
_FIELD_TEST(x2_endstop_adj);
|
|
|
|
// Write dual endstops in X, Y, Z order. Unused = 0.0
|
|
dummyf = 0;
|
|
EEPROM_WRITE(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
|
|
EEPROM_WRITE(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
|
|
EEPROM_WRITE(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
|
|
|
|
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
|
|
EEPROM_WRITE(endstops.z3_endstop_adj); // 1 float
|
|
#else
|
|
EEPROM_WRITE(dummyf);
|
|
#endif
|
|
|
|
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4
|
|
EEPROM_WRITE(endstops.z4_endstop_adj); // 1 float
|
|
#else
|
|
EEPROM_WRITE(dummyf);
|
|
#endif
|
|
|
|
#endif
|
|
}
|
|
|
|
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
|
EEPROM_WRITE(z_stepper_align.xy);
|
|
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
|
EEPROM_WRITE(z_stepper_align.stepper_xy);
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// LCD Preheat settings
|
|
//
|
|
{
|
|
_FIELD_TEST(ui_preheat_hotend_temp);
|
|
|
|
#if HAS_HOTEND && HAS_LCD_MENU
|
|
const int16_t (&ui_preheat_hotend_temp)[2] = ui.preheat_hotend_temp,
|
|
(&ui_preheat_bed_temp)[2] = ui.preheat_bed_temp;
|
|
const uint8_t (&ui_preheat_fan_speed)[2] = ui.preheat_fan_speed;
|
|
#else
|
|
constexpr int16_t ui_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
|
|
ui_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED };
|
|
constexpr uint8_t ui_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
|
|
#endif
|
|
|
|
EEPROM_WRITE(ui_preheat_hotend_temp);
|
|
EEPROM_WRITE(ui_preheat_bed_temp);
|
|
EEPROM_WRITE(ui_preheat_fan_speed);
|
|
}
|
|
|
|
//
|
|
// PIDTEMP
|
|
//
|
|
{
|
|
_FIELD_TEST(hotendPID);
|
|
HOTEND_LOOP() {
|
|
PIDCF_t pidcf = {
|
|
#if DISABLED(PIDTEMP)
|
|
NAN, NAN, NAN,
|
|
NAN, NAN
|
|
#else
|
|
PID_PARAM(Kp, e),
|
|
unscalePID_i(PID_PARAM(Ki, e)),
|
|
unscalePID_d(PID_PARAM(Kd, e)),
|
|
PID_PARAM(Kc, e),
|
|
PID_PARAM(Kf, e)
|
|
#endif
|
|
};
|
|
EEPROM_WRITE(pidcf);
|
|
}
|
|
|
|
_FIELD_TEST(lpq_len);
|
|
#if DISABLED(PID_EXTRUSION_SCALING)
|
|
const int16_t lpq_len = 20;
|
|
#endif
|
|
EEPROM_WRITE(TERN(PID_EXTRUSION_SCALING, thermalManager.lpq_len, lpq_len));
|
|
}
|
|
|
|
//
|
|
// PIDTEMPBED
|
|
//
|
|
{
|
|
_FIELD_TEST(bedPID);
|
|
|
|
const PID_t bed_pid = {
|
|
#if DISABLED(PIDTEMPBED)
|
|
NAN, NAN, NAN
|
|
#else
|
|
// Store the unscaled PID values
|
|
thermalManager.temp_bed.pid.Kp,
|
|
unscalePID_i(thermalManager.temp_bed.pid.Ki),
|
|
unscalePID_d(thermalManager.temp_bed.pid.Kd)
|
|
#endif
|
|
};
|
|
EEPROM_WRITE(bed_pid);
|
|
}
|
|
|
|
//
|
|
// User-defined Thermistors
|
|
//
|
|
#if HAS_USER_THERMISTORS
|
|
{
|
|
_FIELD_TEST(user_thermistor);
|
|
EEPROM_WRITE(thermalManager.user_thermistor);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// LCD Contrast
|
|
//
|
|
{
|
|
_FIELD_TEST(lcd_contrast);
|
|
|
|
const int16_t lcd_contrast =
|
|
#if HAS_LCD_CONTRAST
|
|
ui.contrast
|
|
#else
|
|
127
|
|
#endif
|
|
;
|
|
EEPROM_WRITE(lcd_contrast);
|
|
}
|
|
|
|
//
|
|
// Controller Fan
|
|
//
|
|
{
|
|
_FIELD_TEST(controllerFan_settings);
|
|
#if ENABLED(USE_CONTROLLER_FAN)
|
|
const controllerFan_settings_t &cfs = controllerFan.settings;
|
|
#else
|
|
controllerFan_settings_t cfs = controllerFan_defaults;
|
|
#endif
|
|
EEPROM_WRITE(cfs);
|
|
}
|
|
|
|
//
|
|
// Power-Loss Recovery
|
|
//
|
|
{
|
|
_FIELD_TEST(recovery_enabled);
|
|
const bool recovery_enabled = TERN(POWER_LOSS_RECOVERY, recovery.enabled, ENABLED(PLR_ENABLED_DEFAULT));
|
|
EEPROM_WRITE(recovery_enabled);
|
|
}
|
|
|
|
//
|
|
// Firmware Retraction
|
|
//
|
|
{
|
|
_FIELD_TEST(fwretract_settings);
|
|
#if DISABLED(FWRETRACT)
|
|
const fwretract_settings_t autoretract_defaults = { 3, 45, 0, 0, 0, 13, 0, 8 };
|
|
#endif
|
|
EEPROM_WRITE(TERN(FWRETRACT, fwretract.settings, autoretract_defaults));
|
|
|
|
#if DISABLED(FWRETRACT_AUTORETRACT)
|
|
const bool autoretract_enabled = false;
|
|
#endif
|
|
EEPROM_WRITE(TERN(FWRETRACT_AUTORETRACT, fwretract.autoretract_enabled, autoretract_enabled));
|
|
}
|
|
|
|
//
|
|
// Volumetric & Filament Size
|
|
//
|
|
{
|
|
_FIELD_TEST(parser_volumetric_enabled);
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
|
|
EEPROM_WRITE(parser.volumetric_enabled);
|
|
EEPROM_WRITE(planner.filament_size);
|
|
|
|
#else
|
|
|
|
const bool volumetric_enabled = false;
|
|
dummyf = DEFAULT_NOMINAL_FILAMENT_DIA;
|
|
EEPROM_WRITE(volumetric_enabled);
|
|
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
|
|
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// TMC Configuration
|
|
//
|
|
{
|
|
_FIELD_TEST(tmc_stepper_current);
|
|
|
|
tmc_stepper_current_t tmc_stepper_current = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
#if AXIS_IS_TMC(X)
|
|
tmc_stepper_current.X = stepperX.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Y)
|
|
tmc_stepper_current.Y = stepperY.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z)
|
|
tmc_stepper_current.Z = stepperZ.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(X2)
|
|
tmc_stepper_current.X2 = stepperX2.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Y2)
|
|
tmc_stepper_current.Y2 = stepperY2.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z2)
|
|
tmc_stepper_current.Z2 = stepperZ2.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z3)
|
|
tmc_stepper_current.Z3 = stepperZ3.getMilliamps();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z4)
|
|
tmc_stepper_current.Z4 = stepperZ4.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS
|
|
#if AXIS_IS_TMC(E0)
|
|
tmc_stepper_current.E0 = stepperE0.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 1
|
|
#if AXIS_IS_TMC(E1)
|
|
tmc_stepper_current.E1 = stepperE1.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 2
|
|
#if AXIS_IS_TMC(E2)
|
|
tmc_stepper_current.E2 = stepperE2.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 3
|
|
#if AXIS_IS_TMC(E3)
|
|
tmc_stepper_current.E3 = stepperE3.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 4
|
|
#if AXIS_IS_TMC(E4)
|
|
tmc_stepper_current.E4 = stepperE4.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 5
|
|
#if AXIS_IS_TMC(E5)
|
|
tmc_stepper_current.E5 = stepperE5.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 6
|
|
#if AXIS_IS_TMC(E6)
|
|
tmc_stepper_current.E6 = stepperE6.getMilliamps();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 7
|
|
#if AXIS_IS_TMC(E7)
|
|
tmc_stepper_current.E7 = stepperE7.getMilliamps();
|
|
#endif
|
|
#endif // MAX_EXTRUDERS > 7
|
|
#endif // MAX_EXTRUDERS > 6
|
|
#endif // MAX_EXTRUDERS > 5
|
|
#endif // MAX_EXTRUDERS > 4
|
|
#endif // MAX_EXTRUDERS > 3
|
|
#endif // MAX_EXTRUDERS > 2
|
|
#endif // MAX_EXTRUDERS > 1
|
|
#endif // MAX_EXTRUDERS
|
|
#endif
|
|
EEPROM_WRITE(tmc_stepper_current);
|
|
}
|
|
|
|
//
|
|
// TMC Hybrid Threshold, and placeholder values
|
|
//
|
|
{
|
|
_FIELD_TEST(tmc_hybrid_threshold);
|
|
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
tmc_hybrid_threshold_t tmc_hybrid_threshold = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
tmc_hybrid_threshold.X = stepperX.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
tmc_hybrid_threshold.Y = stepperY.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
tmc_hybrid_threshold.Z = stepperZ.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
tmc_hybrid_threshold.X2 = stepperX2.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
tmc_hybrid_threshold.Y2 = stepperY2.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
tmc_hybrid_threshold.Z2 = stepperZ2.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
tmc_hybrid_threshold.Z3 = stepperZ3.get_pwm_thrs();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
tmc_hybrid_threshold.Z4 = stepperZ4.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
tmc_hybrid_threshold.E0 = stepperE0.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 1
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
tmc_hybrid_threshold.E1 = stepperE1.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 2
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
tmc_hybrid_threshold.E2 = stepperE2.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 3
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
tmc_hybrid_threshold.E3 = stepperE3.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 4
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
tmc_hybrid_threshold.E4 = stepperE4.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 5
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
tmc_hybrid_threshold.E5 = stepperE5.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 6
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
tmc_hybrid_threshold.E6 = stepperE6.get_pwm_thrs();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 7
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
tmc_hybrid_threshold.E7 = stepperE7.get_pwm_thrs();
|
|
#endif
|
|
#endif // MAX_EXTRUDERS > 7
|
|
#endif // MAX_EXTRUDERS > 6
|
|
#endif // MAX_EXTRUDERS > 5
|
|
#endif // MAX_EXTRUDERS > 4
|
|
#endif // MAX_EXTRUDERS > 3
|
|
#endif // MAX_EXTRUDERS > 2
|
|
#endif // MAX_EXTRUDERS > 1
|
|
#endif // MAX_EXTRUDERS
|
|
#else
|
|
const tmc_hybrid_threshold_t tmc_hybrid_threshold = {
|
|
.X = 100, .Y = 100, .Z = 3,
|
|
.X2 = 100, .Y2 = 100, .Z2 = 3, .Z3 = 3, .Z4 = 3,
|
|
.E0 = 30, .E1 = 30, .E2 = 30,
|
|
.E3 = 30, .E4 = 30, .E5 = 30
|
|
};
|
|
#endif
|
|
EEPROM_WRITE(tmc_hybrid_threshold);
|
|
}
|
|
|
|
//
|
|
// TMC StallGuard threshold
|
|
//
|
|
{
|
|
tmc_sgt_t tmc_sgt{0};
|
|
#if USE_SENSORLESS
|
|
TERN_(X_SENSORLESS, tmc_sgt.X = stepperX.homing_threshold());
|
|
TERN_(X2_SENSORLESS, tmc_sgt.X2 = stepperX2.homing_threshold());
|
|
TERN_(Y_SENSORLESS, tmc_sgt.Y = stepperY.homing_threshold());
|
|
TERN_(Y2_SENSORLESS, tmc_sgt.Y2 = stepperY2.homing_threshold());
|
|
TERN_(Z_SENSORLESS, tmc_sgt.Z = stepperZ.homing_threshold());
|
|
TERN_(Z2_SENSORLESS, tmc_sgt.Z2 = stepperZ2.homing_threshold());
|
|
TERN_(Z3_SENSORLESS, tmc_sgt.Z3 = stepperZ3.homing_threshold());
|
|
TERN_(Z4_SENSORLESS, tmc_sgt.Z4 = stepperZ4.homing_threshold());
|
|
#endif
|
|
EEPROM_WRITE(tmc_sgt);
|
|
}
|
|
|
|
//
|
|
// TMC stepping mode
|
|
//
|
|
{
|
|
_FIELD_TEST(tmc_stealth_enabled);
|
|
|
|
tmc_stealth_enabled_t tmc_stealth_enabled = { false, false, false, false, false, false, false, false, false, false, false, false, false };
|
|
|
|
#if HAS_STEALTHCHOP
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
tmc_stealth_enabled.X = stepperX.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
tmc_stealth_enabled.Y = stepperY.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
tmc_stealth_enabled.Z = stepperZ.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
tmc_stealth_enabled.X2 = stepperX2.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
tmc_stealth_enabled.Y2 = stepperY2.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
tmc_stealth_enabled.Z2 = stepperZ2.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
tmc_stealth_enabled.Z3 = stepperZ3.get_stealthChop_status();
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
tmc_stealth_enabled.Z4 = stepperZ4.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
tmc_stealth_enabled.E0 = stepperE0.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 1
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
tmc_stealth_enabled.E1 = stepperE1.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 2
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
tmc_stealth_enabled.E2 = stepperE2.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 3
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
tmc_stealth_enabled.E3 = stepperE3.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 4
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
tmc_stealth_enabled.E4 = stepperE4.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 5
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
tmc_stealth_enabled.E5 = stepperE5.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 6
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
tmc_stealth_enabled.E6 = stepperE6.get_stealthChop_status();
|
|
#endif
|
|
#if MAX_EXTRUDERS > 7
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
tmc_stealth_enabled.E7 = stepperE7.get_stealthChop_status();
|
|
#endif
|
|
#endif // MAX_EXTRUDERS > 7
|
|
#endif // MAX_EXTRUDERS > 6
|
|
#endif // MAX_EXTRUDERS > 5
|
|
#endif // MAX_EXTRUDERS > 4
|
|
#endif // MAX_EXTRUDERS > 3
|
|
#endif // MAX_EXTRUDERS > 2
|
|
#endif // MAX_EXTRUDERS > 1
|
|
#endif // MAX_EXTRUDERS
|
|
#endif
|
|
EEPROM_WRITE(tmc_stealth_enabled);
|
|
}
|
|
|
|
//
|
|
// Linear Advance
|
|
//
|
|
{
|
|
_FIELD_TEST(planner_extruder_advance_K);
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
EEPROM_WRITE(planner.extruder_advance_K);
|
|
#else
|
|
dummyf = 0;
|
|
for (uint8_t q = _MAX(EXTRUDERS, 1); q--;) EEPROM_WRITE(dummyf);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Motor Current PWM
|
|
//
|
|
{
|
|
_FIELD_TEST(motor_current_setting);
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
EEPROM_WRITE(stepper.motor_current_setting);
|
|
#else
|
|
const uint32_t no_current[3] = { 0 };
|
|
EEPROM_WRITE(no_current);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// CNC Coordinate Systems
|
|
//
|
|
|
|
_FIELD_TEST(coordinate_system);
|
|
|
|
#if DISABLED(CNC_COORDINATE_SYSTEMS)
|
|
const xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS] = { { 0 } };
|
|
#endif
|
|
EEPROM_WRITE(TERN(CNC_COORDINATE_SYSTEMS, gcode.coordinate_system, coordinate_system));
|
|
|
|
//
|
|
// Skew correction factors
|
|
//
|
|
_FIELD_TEST(planner_skew_factor);
|
|
EEPROM_WRITE(planner.skew_factor);
|
|
|
|
//
|
|
// Advanced Pause filament load & unload lengths
|
|
//
|
|
#if EXTRUDERS
|
|
{
|
|
#if DISABLED(ADVANCED_PAUSE_FEATURE)
|
|
const fil_change_settings_t fc_settings[EXTRUDERS] = { 0, 0 };
|
|
#endif
|
|
_FIELD_TEST(fc_settings);
|
|
EEPROM_WRITE(fc_settings);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Multiple Extruders
|
|
//
|
|
|
|
#if EXTRUDERS > 1
|
|
_FIELD_TEST(toolchange_settings);
|
|
EEPROM_WRITE(toolchange_settings);
|
|
#endif
|
|
|
|
//
|
|
// Backlash Compensation
|
|
//
|
|
{
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
const xyz_float_t &backlash_distance_mm = backlash.distance_mm;
|
|
const uint8_t &backlash_correction = backlash.correction;
|
|
#else
|
|
const xyz_float_t backlash_distance_mm{0};
|
|
const uint8_t backlash_correction = 0;
|
|
#endif
|
|
#if ENABLED(BACKLASH_GCODE) && defined(BACKLASH_SMOOTHING_MM)
|
|
const float &backlash_smoothing_mm = backlash.smoothing_mm;
|
|
#else
|
|
const float backlash_smoothing_mm = 3;
|
|
#endif
|
|
_FIELD_TEST(backlash_distance_mm);
|
|
EEPROM_WRITE(backlash_distance_mm);
|
|
EEPROM_WRITE(backlash_correction);
|
|
EEPROM_WRITE(backlash_smoothing_mm);
|
|
}
|
|
|
|
//
|
|
// Extensible UI User Data
|
|
//
|
|
#if ENABLED(EXTENSIBLE_UI)
|
|
{
|
|
char extui_data[ExtUI::eeprom_data_size] = { 0 };
|
|
ExtUI::onStoreSettings(extui_data);
|
|
_FIELD_TEST(extui_data);
|
|
EEPROM_WRITE(extui_data);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Case Light Brightness
|
|
//
|
|
#if HAS_CASE_LIGHT_BRIGHTNESS
|
|
EEPROM_WRITE(case_light_brightness);
|
|
#endif
|
|
|
|
//
|
|
// Validate CRC and Data Size
|
|
//
|
|
if (!eeprom_error) {
|
|
const uint16_t eeprom_size = eeprom_index - (EEPROM_OFFSET),
|
|
final_crc = working_crc;
|
|
|
|
// Write the EEPROM header
|
|
eeprom_index = EEPROM_OFFSET;
|
|
|
|
EEPROM_WRITE(version);
|
|
EEPROM_WRITE(final_crc);
|
|
|
|
// Report storage size
|
|
DEBUG_ECHO_START();
|
|
DEBUG_ECHOLNPAIR("Settings Stored (", eeprom_size, " bytes; crc ", (uint32_t)final_crc, ")");
|
|
|
|
eeprom_error |= size_error(eeprom_size);
|
|
}
|
|
EEPROM_FINISH();
|
|
|
|
//
|
|
// UBL Mesh
|
|
//
|
|
#if ENABLED(UBL_SAVE_ACTIVE_ON_M500)
|
|
if (ubl.storage_slot >= 0)
|
|
store_mesh(ubl.storage_slot);
|
|
#endif
|
|
|
|
if (!eeprom_error) LCD_MESSAGEPGM(MSG_SETTINGS_STORED);
|
|
|
|
TERN_(EXTENSIBLE_UI, ExtUI::onConfigurationStoreWritten(!eeprom_error));
|
|
|
|
return !eeprom_error;
|
|
}
|
|
|
|
/**
|
|
* M501 - Retrieve Configuration
|
|
*/
|
|
bool MarlinSettings::_load() {
|
|
uint16_t working_crc = 0;
|
|
|
|
EEPROM_START();
|
|
|
|
char stored_ver[4];
|
|
EEPROM_READ_ALWAYS(stored_ver);
|
|
|
|
uint16_t stored_crc;
|
|
EEPROM_READ_ALWAYS(stored_crc);
|
|
|
|
// Version has to match or defaults are used
|
|
if (strncmp(version, stored_ver, 3) != 0) {
|
|
if (stored_ver[3] != '\0') {
|
|
stored_ver[0] = '?';
|
|
stored_ver[1] = '\0';
|
|
}
|
|
DEBUG_ECHO_START();
|
|
DEBUG_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
|
|
#if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
|
|
LCD_MESSAGEPGM(MSG_ERR_EEPROM_VERSION);
|
|
#endif
|
|
eeprom_error = true;
|
|
}
|
|
else {
|
|
float dummyf = 0;
|
|
working_crc = 0; // Init to 0. Accumulated by EEPROM_READ
|
|
|
|
_FIELD_TEST(esteppers);
|
|
|
|
// Number of esteppers may change
|
|
uint8_t esteppers;
|
|
EEPROM_READ_ALWAYS(esteppers);
|
|
|
|
//
|
|
// Planner Motion
|
|
//
|
|
{
|
|
// Get only the number of E stepper parameters previously stored
|
|
// Any steppers added later are set to their defaults
|
|
uint32_t tmp1[XYZ + esteppers];
|
|
float tmp2[XYZ + esteppers];
|
|
feedRate_t tmp3[XYZ + esteppers];
|
|
EEPROM_READ(tmp1); // max_acceleration_mm_per_s2
|
|
EEPROM_READ(planner.settings.min_segment_time_us);
|
|
EEPROM_READ(tmp2); // axis_steps_per_mm
|
|
EEPROM_READ(tmp3); // max_feedrate_mm_s
|
|
|
|
if (!validating) LOOP_XYZE_N(i) {
|
|
const bool in = (i < esteppers + XYZ);
|
|
planner.settings.max_acceleration_mm_per_s2[i] = in ? tmp1[i] : pgm_read_dword(&_DMA[ALIM(i, _DMA)]);
|
|
planner.settings.axis_steps_per_mm[i] = in ? tmp2[i] : pgm_read_float(&_DASU[ALIM(i, _DASU)]);
|
|
planner.settings.max_feedrate_mm_s[i] = in ? tmp3[i] : pgm_read_float(&_DMF[ALIM(i, _DMF)]);
|
|
}
|
|
|
|
EEPROM_READ(planner.settings.acceleration);
|
|
EEPROM_READ(planner.settings.retract_acceleration);
|
|
EEPROM_READ(planner.settings.travel_acceleration);
|
|
EEPROM_READ(planner.settings.min_feedrate_mm_s);
|
|
EEPROM_READ(planner.settings.min_travel_feedrate_mm_s);
|
|
|
|
#if HAS_CLASSIC_JERK
|
|
EEPROM_READ(planner.max_jerk);
|
|
#if HAS_LINEAR_E_JERK
|
|
EEPROM_READ(dummyf);
|
|
#endif
|
|
#else
|
|
for (uint8_t q = 4; q--;) EEPROM_READ(dummyf);
|
|
#endif
|
|
|
|
EEPROM_READ(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
|
|
}
|
|
|
|
//
|
|
// Home Offset (M206 / M665)
|
|
//
|
|
{
|
|
_FIELD_TEST(home_offset);
|
|
|
|
#if HAS_SCARA_OFFSET
|
|
EEPROM_READ(scara_home_offset);
|
|
#else
|
|
#if !HAS_HOME_OFFSET
|
|
xyz_pos_t home_offset;
|
|
#endif
|
|
EEPROM_READ(home_offset);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Hotend Offsets, if any
|
|
//
|
|
{
|
|
#if HAS_HOTEND_OFFSET
|
|
// Skip hotend 0 which must be 0
|
|
LOOP_S_L_N(e, 1, HOTENDS)
|
|
EEPROM_READ(hotend_offset[e]);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Filament Runout Sensor
|
|
//
|
|
{
|
|
#if HAS_FILAMENT_SENSOR
|
|
const bool &runout_sensor_enabled = runout.enabled;
|
|
#else
|
|
bool runout_sensor_enabled;
|
|
#endif
|
|
_FIELD_TEST(runout_sensor_enabled);
|
|
EEPROM_READ(runout_sensor_enabled);
|
|
|
|
float runout_distance_mm;
|
|
EEPROM_READ(runout_distance_mm);
|
|
#if HAS_FILAMENT_SENSOR && defined(FILAMENT_RUNOUT_DISTANCE_MM)
|
|
if (!validating) runout.set_runout_distance(runout_distance_mm);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Global Leveling
|
|
//
|
|
EEPROM_READ(TERN(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height, dummyf));
|
|
|
|
//
|
|
// Mesh (Manual) Bed Leveling
|
|
//
|
|
{
|
|
uint8_t mesh_num_x, mesh_num_y;
|
|
EEPROM_READ(dummyf);
|
|
EEPROM_READ_ALWAYS(mesh_num_x);
|
|
EEPROM_READ_ALWAYS(mesh_num_y);
|
|
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
if (!validating) mbl.z_offset = dummyf;
|
|
if (mesh_num_x == GRID_MAX_POINTS_X && mesh_num_y == GRID_MAX_POINTS_Y) {
|
|
// EEPROM data fits the current mesh
|
|
EEPROM_READ(mbl.z_values);
|
|
}
|
|
else {
|
|
// EEPROM data is stale
|
|
if (!validating) mbl.reset();
|
|
for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummyf);
|
|
}
|
|
#else
|
|
// MBL is disabled - skip the stored data
|
|
for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummyf);
|
|
#endif // MESH_BED_LEVELING
|
|
}
|
|
|
|
//
|
|
// Probe Z Offset
|
|
//
|
|
{
|
|
_FIELD_TEST(probe_offset);
|
|
#if HAS_BED_PROBE
|
|
const xyz_pos_t &zpo = probe.offset;
|
|
#else
|
|
xyz_pos_t zpo;
|
|
#endif
|
|
EEPROM_READ(zpo);
|
|
}
|
|
|
|
//
|
|
// Planar Bed Leveling matrix
|
|
//
|
|
{
|
|
#if ABL_PLANAR
|
|
EEPROM_READ(planner.bed_level_matrix);
|
|
#else
|
|
for (uint8_t q = 9; q--;) EEPROM_READ(dummyf);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Bilinear Auto Bed Leveling
|
|
//
|
|
{
|
|
uint8_t grid_max_x, grid_max_y;
|
|
EEPROM_READ_ALWAYS(grid_max_x); // 1 byte
|
|
EEPROM_READ_ALWAYS(grid_max_y); // 1 byte
|
|
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
if (grid_max_x == GRID_MAX_POINTS_X && grid_max_y == GRID_MAX_POINTS_Y) {
|
|
if (!validating) set_bed_leveling_enabled(false);
|
|
EEPROM_READ(bilinear_grid_spacing); // 2 ints
|
|
EEPROM_READ(bilinear_start); // 2 ints
|
|
EEPROM_READ(z_values); // 9 to 256 floats
|
|
}
|
|
else // EEPROM data is stale
|
|
#endif // AUTO_BED_LEVELING_BILINEAR
|
|
{
|
|
// Skip past disabled (or stale) Bilinear Grid data
|
|
xy_pos_t bgs, bs;
|
|
EEPROM_READ(bgs);
|
|
EEPROM_READ(bs);
|
|
for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_READ(dummyf);
|
|
}
|
|
}
|
|
|
|
//
|
|
// Unified Bed Leveling active state
|
|
//
|
|
{
|
|
_FIELD_TEST(planner_leveling_active);
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
const bool &planner_leveling_active = planner.leveling_active;
|
|
const int8_t &ubl_storage_slot = ubl.storage_slot;
|
|
#else
|
|
bool planner_leveling_active;
|
|
int8_t ubl_storage_slot;
|
|
#endif
|
|
EEPROM_READ(planner_leveling_active);
|
|
EEPROM_READ(ubl_storage_slot);
|
|
}
|
|
|
|
//
|
|
// SERVO_ANGLES
|
|
//
|
|
{
|
|
_FIELD_TEST(servo_angles);
|
|
#if ENABLED(EDITABLE_SERVO_ANGLES)
|
|
uint16_t (&servo_angles_arr)[EEPROM_NUM_SERVOS][2] = servo_angles;
|
|
#else
|
|
uint16_t servo_angles_arr[EEPROM_NUM_SERVOS][2];
|
|
#endif
|
|
EEPROM_READ(servo_angles_arr);
|
|
}
|
|
|
|
//
|
|
// Thermal first layer compensation values
|
|
//
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
EEPROM_READ(temp_comp.z_offsets_probe);
|
|
EEPROM_READ(temp_comp.z_offsets_bed);
|
|
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
|
|
EEPROM_READ(temp_comp.z_offsets_ext);
|
|
#endif
|
|
temp_comp.reset_index();
|
|
#else
|
|
// No placeholder data for this feature
|
|
#endif
|
|
|
|
//
|
|
// BLTOUCH
|
|
//
|
|
{
|
|
_FIELD_TEST(bltouch_last_written_mode);
|
|
#if ENABLED(BLTOUCH)
|
|
const bool &bltouch_last_written_mode = bltouch.last_written_mode;
|
|
#else
|
|
bool bltouch_last_written_mode;
|
|
#endif
|
|
EEPROM_READ(bltouch_last_written_mode);
|
|
}
|
|
|
|
//
|
|
// DELTA Geometry or Dual Endstops offsets
|
|
//
|
|
{
|
|
#if ENABLED(DELTA)
|
|
|
|
_FIELD_TEST(delta_height);
|
|
|
|
EEPROM_READ(delta_height); // 1 float
|
|
EEPROM_READ(delta_endstop_adj); // 3 floats
|
|
EEPROM_READ(delta_radius); // 1 float
|
|
EEPROM_READ(delta_diagonal_rod); // 1 float
|
|
EEPROM_READ(delta_segments_per_second); // 1 float
|
|
EEPROM_READ(delta_tower_angle_trim); // 3 floats
|
|
|
|
#elif HAS_EXTRA_ENDSTOPS
|
|
|
|
_FIELD_TEST(x2_endstop_adj);
|
|
|
|
EEPROM_READ(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
|
|
EEPROM_READ(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
|
|
EEPROM_READ(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
|
|
|
|
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
|
|
EEPROM_READ(endstops.z3_endstop_adj); // 1 float
|
|
#else
|
|
EEPROM_READ(dummyf);
|
|
#endif
|
|
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4
|
|
EEPROM_READ(endstops.z4_endstop_adj); // 1 float
|
|
#else
|
|
EEPROM_READ(dummyf);
|
|
#endif
|
|
|
|
#endif
|
|
}
|
|
|
|
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
|
EEPROM_READ(z_stepper_align.xy);
|
|
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
|
|
EEPROM_READ(z_stepper_align.stepper_xy);
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// LCD Preheat settings
|
|
//
|
|
{
|
|
_FIELD_TEST(ui_preheat_hotend_temp);
|
|
|
|
#if HAS_HOTEND && HAS_LCD_MENU
|
|
int16_t (&ui_preheat_hotend_temp)[2] = ui.preheat_hotend_temp,
|
|
(&ui_preheat_bed_temp)[2] = ui.preheat_bed_temp;
|
|
uint8_t (&ui_preheat_fan_speed)[2] = ui.preheat_fan_speed;
|
|
#else
|
|
int16_t ui_preheat_hotend_temp[2], ui_preheat_bed_temp[2];
|
|
uint8_t ui_preheat_fan_speed[2];
|
|
#endif
|
|
EEPROM_READ(ui_preheat_hotend_temp); // 2 floats
|
|
EEPROM_READ(ui_preheat_bed_temp); // 2 floats
|
|
EEPROM_READ(ui_preheat_fan_speed); // 2 floats
|
|
}
|
|
|
|
//
|
|
// Hotend PID
|
|
//
|
|
{
|
|
HOTEND_LOOP() {
|
|
PIDCF_t pidcf;
|
|
EEPROM_READ(pidcf);
|
|
#if ENABLED(PIDTEMP)
|
|
if (!validating && !isnan(pidcf.Kp)) {
|
|
// Scale PID values since EEPROM values are unscaled
|
|
PID_PARAM(Kp, e) = pidcf.Kp;
|
|
PID_PARAM(Ki, e) = scalePID_i(pidcf.Ki);
|
|
PID_PARAM(Kd, e) = scalePID_d(pidcf.Kd);
|
|
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = pidcf.Kc);
|
|
TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = pidcf.Kf);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
//
|
|
// PID Extrusion Scaling
|
|
//
|
|
{
|
|
_FIELD_TEST(lpq_len);
|
|
#if ENABLED(PID_EXTRUSION_SCALING)
|
|
const int16_t &lpq_len = thermalManager.lpq_len;
|
|
#else
|
|
int16_t lpq_len;
|
|
#endif
|
|
EEPROM_READ(lpq_len);
|
|
}
|
|
|
|
//
|
|
// Heated Bed PID
|
|
//
|
|
{
|
|
PID_t pid;
|
|
EEPROM_READ(pid);
|
|
#if ENABLED(PIDTEMPBED)
|
|
if (!validating && !isnan(pid.Kp)) {
|
|
// Scale PID values since EEPROM values are unscaled
|
|
thermalManager.temp_bed.pid.Kp = pid.Kp;
|
|
thermalManager.temp_bed.pid.Ki = scalePID_i(pid.Ki);
|
|
thermalManager.temp_bed.pid.Kd = scalePID_d(pid.Kd);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// User-defined Thermistors
|
|
//
|
|
#if HAS_USER_THERMISTORS
|
|
{
|
|
_FIELD_TEST(user_thermistor);
|
|
EEPROM_READ(thermalManager.user_thermistor);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// LCD Contrast
|
|
//
|
|
{
|
|
_FIELD_TEST(lcd_contrast);
|
|
|
|
int16_t lcd_contrast;
|
|
EEPROM_READ(lcd_contrast);
|
|
TERN_(HAS_LCD_CONTRAST, ui.set_contrast(lcd_contrast));
|
|
}
|
|
|
|
//
|
|
// Controller Fan
|
|
//
|
|
{
|
|
_FIELD_TEST(controllerFan_settings);
|
|
#if ENABLED(CONTROLLER_FAN_EDITABLE)
|
|
const controllerFan_settings_t &cfs = controllerFan.settings;
|
|
#else
|
|
controllerFan_settings_t cfs = { 0 };
|
|
#endif
|
|
EEPROM_READ(cfs);
|
|
}
|
|
|
|
//
|
|
// Power-Loss Recovery
|
|
//
|
|
{
|
|
_FIELD_TEST(recovery_enabled);
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
const bool &recovery_enabled = recovery.enabled;
|
|
#else
|
|
bool recovery_enabled;
|
|
#endif
|
|
EEPROM_READ(recovery_enabled);
|
|
}
|
|
|
|
//
|
|
// Firmware Retraction
|
|
//
|
|
{
|
|
_FIELD_TEST(fwretract_settings);
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
EEPROM_READ(fwretract.settings);
|
|
#else
|
|
fwretract_settings_t fwretract_settings;
|
|
EEPROM_READ(fwretract_settings);
|
|
#endif
|
|
#if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
|
|
EEPROM_READ(fwretract.autoretract_enabled);
|
|
#else
|
|
bool autoretract_enabled;
|
|
EEPROM_READ(autoretract_enabled);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Volumetric & Filament Size
|
|
//
|
|
{
|
|
struct {
|
|
bool volumetric_enabled;
|
|
float filament_size[EXTRUDERS];
|
|
} storage;
|
|
|
|
_FIELD_TEST(parser_volumetric_enabled);
|
|
EEPROM_READ(storage);
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
if (!validating) {
|
|
parser.volumetric_enabled = storage.volumetric_enabled;
|
|
COPY(planner.filament_size, storage.filament_size);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// TMC Stepper Settings
|
|
//
|
|
|
|
if (!validating) reset_stepper_drivers();
|
|
|
|
// TMC Stepper Current
|
|
{
|
|
_FIELD_TEST(tmc_stepper_current);
|
|
|
|
tmc_stepper_current_t currents;
|
|
EEPROM_READ(currents);
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
|
|
#define SET_CURR(Q) stepper##Q.rms_current(currents.Q ? currents.Q : Q##_CURRENT)
|
|
if (!validating) {
|
|
#if AXIS_IS_TMC(X)
|
|
SET_CURR(X);
|
|
#endif
|
|
#if AXIS_IS_TMC(Y)
|
|
SET_CURR(Y);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z)
|
|
SET_CURR(Z);
|
|
#endif
|
|
#if AXIS_IS_TMC(X2)
|
|
SET_CURR(X2);
|
|
#endif
|
|
#if AXIS_IS_TMC(Y2)
|
|
SET_CURR(Y2);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z2)
|
|
SET_CURR(Z2);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z3)
|
|
SET_CURR(Z3);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z4)
|
|
SET_CURR(Z4);
|
|
#endif
|
|
#if AXIS_IS_TMC(E0)
|
|
SET_CURR(E0);
|
|
#endif
|
|
#if AXIS_IS_TMC(E1)
|
|
SET_CURR(E1);
|
|
#endif
|
|
#if AXIS_IS_TMC(E2)
|
|
SET_CURR(E2);
|
|
#endif
|
|
#if AXIS_IS_TMC(E3)
|
|
SET_CURR(E3);
|
|
#endif
|
|
#if AXIS_IS_TMC(E4)
|
|
SET_CURR(E4);
|
|
#endif
|
|
#if AXIS_IS_TMC(E5)
|
|
SET_CURR(E5);
|
|
#endif
|
|
#if AXIS_IS_TMC(E6)
|
|
SET_CURR(E6);
|
|
#endif
|
|
#if AXIS_IS_TMC(E7)
|
|
SET_CURR(E7);
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
|
|
// TMC Hybrid Threshold
|
|
{
|
|
tmc_hybrid_threshold_t tmc_hybrid_threshold;
|
|
_FIELD_TEST(tmc_hybrid_threshold);
|
|
EEPROM_READ(tmc_hybrid_threshold);
|
|
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
if (!validating) {
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
stepperX.set_pwm_thrs(tmc_hybrid_threshold.X);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
stepperY.set_pwm_thrs(tmc_hybrid_threshold.Y);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
stepperZ.set_pwm_thrs(tmc_hybrid_threshold.Z);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
stepperX2.set_pwm_thrs(tmc_hybrid_threshold.X2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
stepperY2.set_pwm_thrs(tmc_hybrid_threshold.Y2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
stepperZ2.set_pwm_thrs(tmc_hybrid_threshold.Z2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
stepperZ3.set_pwm_thrs(tmc_hybrid_threshold.Z3);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
stepperZ4.set_pwm_thrs(tmc_hybrid_threshold.Z4);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
stepperE0.set_pwm_thrs(tmc_hybrid_threshold.E0);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
stepperE1.set_pwm_thrs(tmc_hybrid_threshold.E1);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
stepperE2.set_pwm_thrs(tmc_hybrid_threshold.E2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
stepperE3.set_pwm_thrs(tmc_hybrid_threshold.E3);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
stepperE4.set_pwm_thrs(tmc_hybrid_threshold.E4);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
stepperE5.set_pwm_thrs(tmc_hybrid_threshold.E5);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
stepperE6.set_pwm_thrs(tmc_hybrid_threshold.E6);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
stepperE7.set_pwm_thrs(tmc_hybrid_threshold.E7);
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// TMC StallGuard threshold.
|
|
//
|
|
{
|
|
tmc_sgt_t tmc_sgt;
|
|
_FIELD_TEST(tmc_sgt);
|
|
EEPROM_READ(tmc_sgt);
|
|
#if USE_SENSORLESS
|
|
if (!validating) {
|
|
TERN_(X_SENSORLESS, stepperX.homing_threshold(tmc_sgt.X));
|
|
TERN_(X2_SENSORLESS, stepperX2.homing_threshold(tmc_sgt.X2));
|
|
TERN_(Y_SENSORLESS, stepperY.homing_threshold(tmc_sgt.Y));
|
|
TERN_(Y2_SENSORLESS, stepperY2.homing_threshold(tmc_sgt.Y2));
|
|
TERN_(Z_SENSORLESS, stepperZ.homing_threshold(tmc_sgt.Z));
|
|
TERN_(Z2_SENSORLESS, stepperZ2.homing_threshold(tmc_sgt.Z2));
|
|
TERN_(Z3_SENSORLESS, stepperZ3.homing_threshold(tmc_sgt.Z3));
|
|
TERN_(Z4_SENSORLESS, stepperZ4.homing_threshold(tmc_sgt.Z4));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
// TMC stepping mode
|
|
{
|
|
_FIELD_TEST(tmc_stealth_enabled);
|
|
|
|
tmc_stealth_enabled_t tmc_stealth_enabled;
|
|
EEPROM_READ(tmc_stealth_enabled);
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
|
|
#define SET_STEPPING_MODE(ST) stepper##ST.stored.stealthChop_enabled = tmc_stealth_enabled.ST; stepper##ST.refresh_stepping_mode();
|
|
if (!validating) {
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
SET_STEPPING_MODE(X);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
SET_STEPPING_MODE(Y);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
SET_STEPPING_MODE(Z);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
SET_STEPPING_MODE(X2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
SET_STEPPING_MODE(Y2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
SET_STEPPING_MODE(Z2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
SET_STEPPING_MODE(Z3);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
SET_STEPPING_MODE(Z4);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
SET_STEPPING_MODE(E0);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
SET_STEPPING_MODE(E1);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
SET_STEPPING_MODE(E2);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
SET_STEPPING_MODE(E3);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
SET_STEPPING_MODE(E4);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
SET_STEPPING_MODE(E5);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
SET_STEPPING_MODE(E6);
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
SET_STEPPING_MODE(E7);
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Linear Advance
|
|
//
|
|
{
|
|
float extruder_advance_K[_MAX(EXTRUDERS, 1)];
|
|
_FIELD_TEST(planner_extruder_advance_K);
|
|
EEPROM_READ(extruder_advance_K);
|
|
#if ENABLED(LIN_ADVANCE)
|
|
if (!validating)
|
|
COPY(planner.extruder_advance_K, extruder_advance_K);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Motor Current PWM
|
|
//
|
|
{
|
|
uint32_t motor_current_setting[3];
|
|
_FIELD_TEST(motor_current_setting);
|
|
EEPROM_READ(motor_current_setting);
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
if (!validating)
|
|
COPY(stepper.motor_current_setting, motor_current_setting);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// CNC Coordinate System
|
|
//
|
|
{
|
|
_FIELD_TEST(coordinate_system);
|
|
#if ENABLED(CNC_COORDINATE_SYSTEMS)
|
|
if (!validating) (void)gcode.select_coordinate_system(-1); // Go back to machine space
|
|
EEPROM_READ(gcode.coordinate_system);
|
|
#else
|
|
xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS];
|
|
EEPROM_READ(coordinate_system);
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Skew correction factors
|
|
//
|
|
{
|
|
skew_factor_t skew_factor;
|
|
_FIELD_TEST(planner_skew_factor);
|
|
EEPROM_READ(skew_factor);
|
|
#if ENABLED(SKEW_CORRECTION_GCODE)
|
|
if (!validating) {
|
|
planner.skew_factor.xy = skew_factor.xy;
|
|
#if ENABLED(SKEW_CORRECTION_FOR_Z)
|
|
planner.skew_factor.xz = skew_factor.xz;
|
|
planner.skew_factor.yz = skew_factor.yz;
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//
|
|
// Advanced Pause filament load & unload lengths
|
|
//
|
|
#if EXTRUDERS
|
|
{
|
|
#if DISABLED(ADVANCED_PAUSE_FEATURE)
|
|
fil_change_settings_t fc_settings[EXTRUDERS];
|
|
#endif
|
|
_FIELD_TEST(fc_settings);
|
|
EEPROM_READ(fc_settings);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Tool-change settings
|
|
//
|
|
#if EXTRUDERS > 1
|
|
_FIELD_TEST(toolchange_settings);
|
|
EEPROM_READ(toolchange_settings);
|
|
#endif
|
|
|
|
//
|
|
// Backlash Compensation
|
|
//
|
|
{
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
const xyz_float_t &backlash_distance_mm = backlash.distance_mm;
|
|
const uint8_t &backlash_correction = backlash.correction;
|
|
#else
|
|
float backlash_distance_mm[XYZ];
|
|
uint8_t backlash_correction;
|
|
#endif
|
|
#if ENABLED(BACKLASH_GCODE) && defined(BACKLASH_SMOOTHING_MM)
|
|
const float &backlash_smoothing_mm = backlash.smoothing_mm;
|
|
#else
|
|
float backlash_smoothing_mm;
|
|
#endif
|
|
_FIELD_TEST(backlash_distance_mm);
|
|
EEPROM_READ(backlash_distance_mm);
|
|
EEPROM_READ(backlash_correction);
|
|
EEPROM_READ(backlash_smoothing_mm);
|
|
}
|
|
|
|
//
|
|
// Extensible UI User Data
|
|
//
|
|
#if ENABLED(EXTENSIBLE_UI)
|
|
// This is a significant hardware change; don't reserve EEPROM space when not present
|
|
{
|
|
const char extui_data[ExtUI::eeprom_data_size] = { 0 };
|
|
_FIELD_TEST(extui_data);
|
|
EEPROM_READ(extui_data);
|
|
if (!validating) ExtUI::onLoadSettings(extui_data);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Case Light Brightness
|
|
//
|
|
#if HAS_CASE_LIGHT_BRIGHTNESS
|
|
_FIELD_TEST(case_light_brightness);
|
|
EEPROM_READ(case_light_brightness);
|
|
#endif
|
|
|
|
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
|
|
if (eeprom_error) {
|
|
DEBUG_ECHO_START();
|
|
DEBUG_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
|
|
#if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
|
|
LCD_MESSAGEPGM(MSG_ERR_EEPROM_INDEX);
|
|
#endif
|
|
}
|
|
else if (working_crc != stored_crc) {
|
|
eeprom_error = true;
|
|
DEBUG_ERROR_START();
|
|
DEBUG_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
|
|
#if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
|
|
LCD_MESSAGEPGM(MSG_ERR_EEPROM_CRC);
|
|
#endif
|
|
}
|
|
else if (!validating) {
|
|
DEBUG_ECHO_START();
|
|
DEBUG_ECHO(version);
|
|
DEBUG_ECHOLNPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET), " bytes; crc ", (uint32_t)working_crc, ")");
|
|
}
|
|
|
|
if (!validating && !eeprom_error) postprocess();
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
if (!validating) {
|
|
ubl.report_state();
|
|
|
|
if (!ubl.sanity_check()) {
|
|
SERIAL_EOL();
|
|
#if ENABLED(EEPROM_CHITCHAT)
|
|
ubl.echo_name();
|
|
DEBUG_ECHOLNPGM(" initialized.\n");
|
|
#endif
|
|
}
|
|
else {
|
|
eeprom_error = true;
|
|
#if ENABLED(EEPROM_CHITCHAT)
|
|
DEBUG_ECHOPGM("?Can't enable ");
|
|
ubl.echo_name();
|
|
DEBUG_ECHOLNPGM(".");
|
|
#endif
|
|
ubl.reset();
|
|
}
|
|
|
|
if (ubl.storage_slot >= 0) {
|
|
load_mesh(ubl.storage_slot);
|
|
DEBUG_ECHOLNPAIR("Mesh ", ubl.storage_slot, " loaded from storage.");
|
|
}
|
|
else {
|
|
ubl.reset();
|
|
DEBUG_ECHOLNPGM("UBL reset");
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503)
|
|
// Report the EEPROM settings
|
|
if (!validating && (DISABLED(EEPROM_BOOT_SILENT) || IsRunning())) report();
|
|
#endif
|
|
|
|
EEPROM_FINISH();
|
|
|
|
return !eeprom_error;
|
|
}
|
|
|
|
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
|
|
extern bool restoreEEPROM();
|
|
#endif
|
|
|
|
bool MarlinSettings::validate() {
|
|
validating = true;
|
|
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
|
|
bool success = _load();
|
|
if (!success && restoreEEPROM()) {
|
|
SERIAL_ECHOLNPGM("Recovered backup EEPROM settings from SPI Flash");
|
|
success = _load();
|
|
}
|
|
#else
|
|
const bool success = _load();
|
|
#endif
|
|
validating = false;
|
|
return success;
|
|
}
|
|
|
|
bool MarlinSettings::load() {
|
|
if (validate()) {
|
|
const bool success = _load();
|
|
TERN_(EXTENSIBLE_UI, ExtUI::onConfigurationStoreRead(success));
|
|
return success;
|
|
}
|
|
reset();
|
|
#if ENABLED(EEPROM_AUTO_INIT)
|
|
(void)save();
|
|
SERIAL_ECHO_MSG("EEPROM Initialized");
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
inline void ubl_invalid_slot(const int s) {
|
|
#if ENABLED(EEPROM_CHITCHAT)
|
|
DEBUG_ECHOLNPGM("?Invalid slot.");
|
|
DEBUG_ECHO(s);
|
|
DEBUG_ECHOLNPGM(" mesh slots available.");
|
|
#else
|
|
UNUSED(s);
|
|
#endif
|
|
}
|
|
|
|
const uint16_t MarlinSettings::meshes_end = persistentStore.capacity() - 129; // 128 (+1 because of the change to capacity rather than last valid address)
|
|
// is a placeholder for the size of the MAT; the MAT will always
|
|
// live at the very end of the eeprom
|
|
|
|
uint16_t MarlinSettings::meshes_start_index() {
|
|
return (datasize() + EEPROM_OFFSET + 32) & 0xFFF8; // Pad the end of configuration data so it can float up
|
|
// or down a little bit without disrupting the mesh data
|
|
}
|
|
|
|
uint16_t MarlinSettings::calc_num_meshes() {
|
|
return (meshes_end - meshes_start_index()) / sizeof(ubl.z_values);
|
|
}
|
|
|
|
int MarlinSettings::mesh_slot_offset(const int8_t slot) {
|
|
return meshes_end - (slot + 1) * sizeof(ubl.z_values);
|
|
}
|
|
|
|
void MarlinSettings::store_mesh(const int8_t slot) {
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
const int16_t a = calc_num_meshes();
|
|
if (!WITHIN(slot, 0, a - 1)) {
|
|
ubl_invalid_slot(a);
|
|
DEBUG_ECHOLNPAIR("E2END=", persistentStore.capacity() - 1, " meshes_end=", meshes_end, " slot=", slot);
|
|
DEBUG_EOL();
|
|
return;
|
|
}
|
|
|
|
int pos = mesh_slot_offset(slot);
|
|
uint16_t crc = 0;
|
|
|
|
// Write crc to MAT along with other data, or just tack on to the beginning or end
|
|
persistentStore.access_start();
|
|
const bool status = persistentStore.write_data(pos, (uint8_t *)&ubl.z_values, sizeof(ubl.z_values), &crc);
|
|
persistentStore.access_finish();
|
|
|
|
if (status) SERIAL_ECHOLNPGM("?Unable to save mesh data.");
|
|
else DEBUG_ECHOLNPAIR("Mesh saved in slot ", slot);
|
|
|
|
#else
|
|
|
|
// Other mesh types
|
|
|
|
#endif
|
|
}
|
|
|
|
void MarlinSettings::load_mesh(const int8_t slot, void * const into/*=nullptr*/) {
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
const int16_t a = settings.calc_num_meshes();
|
|
|
|
if (!WITHIN(slot, 0, a - 1)) {
|
|
ubl_invalid_slot(a);
|
|
return;
|
|
}
|
|
|
|
int pos = mesh_slot_offset(slot);
|
|
uint16_t crc = 0;
|
|
uint8_t * const dest = into ? (uint8_t*)into : (uint8_t*)&ubl.z_values;
|
|
|
|
persistentStore.access_start();
|
|
const uint16_t status = persistentStore.read_data(pos, dest, sizeof(ubl.z_values), &crc);
|
|
persistentStore.access_finish();
|
|
|
|
if (status) SERIAL_ECHOLNPGM("?Unable to load mesh data.");
|
|
else DEBUG_ECHOLNPAIR("Mesh loaded from slot ", slot);
|
|
|
|
EEPROM_FINISH();
|
|
|
|
#else
|
|
|
|
// Other mesh types
|
|
|
|
#endif
|
|
}
|
|
|
|
//void MarlinSettings::delete_mesh() { return; }
|
|
//void MarlinSettings::defrag_meshes() { return; }
|
|
|
|
#endif // AUTO_BED_LEVELING_UBL
|
|
|
|
#else // !EEPROM_SETTINGS
|
|
|
|
bool MarlinSettings::save() {
|
|
DEBUG_ERROR_MSG("EEPROM disabled");
|
|
return false;
|
|
}
|
|
|
|
#endif // !EEPROM_SETTINGS
|
|
|
|
/**
|
|
* M502 - Reset Configuration
|
|
*/
|
|
void MarlinSettings::reset() {
|
|
LOOP_XYZE_N(i) {
|
|
planner.settings.max_acceleration_mm_per_s2[i] = pgm_read_dword(&_DMA[ALIM(i, _DMA)]);
|
|
planner.settings.axis_steps_per_mm[i] = pgm_read_float(&_DASU[ALIM(i, _DASU)]);
|
|
planner.settings.max_feedrate_mm_s[i] = pgm_read_float(&_DMF[ALIM(i, _DMF)]);
|
|
}
|
|
|
|
planner.settings.min_segment_time_us = DEFAULT_MINSEGMENTTIME;
|
|
planner.settings.acceleration = DEFAULT_ACCELERATION;
|
|
planner.settings.retract_acceleration = DEFAULT_RETRACT_ACCELERATION;
|
|
planner.settings.travel_acceleration = DEFAULT_TRAVEL_ACCELERATION;
|
|
planner.settings.min_feedrate_mm_s = feedRate_t(DEFAULT_MINIMUMFEEDRATE);
|
|
planner.settings.min_travel_feedrate_mm_s = feedRate_t(DEFAULT_MINTRAVELFEEDRATE);
|
|
|
|
#if HAS_CLASSIC_JERK
|
|
#ifndef DEFAULT_XJERK
|
|
#define DEFAULT_XJERK 0
|
|
#endif
|
|
#ifndef DEFAULT_YJERK
|
|
#define DEFAULT_YJERK 0
|
|
#endif
|
|
#ifndef DEFAULT_ZJERK
|
|
#define DEFAULT_ZJERK 0
|
|
#endif
|
|
planner.max_jerk.set(DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK);
|
|
TERN_(HAS_CLASSIC_E_JERK, planner.max_jerk.e = DEFAULT_EJERK;);
|
|
#endif
|
|
|
|
#if HAS_JUNCTION_DEVIATION
|
|
planner.junction_deviation_mm = float(JUNCTION_DEVIATION_MM);
|
|
#endif
|
|
|
|
#if HAS_SCARA_OFFSET
|
|
scara_home_offset.reset();
|
|
#elif HAS_HOME_OFFSET
|
|
home_offset.reset();
|
|
#endif
|
|
|
|
TERN_(HAS_HOTEND_OFFSET, reset_hotend_offsets());
|
|
|
|
//
|
|
// Filament Runout Sensor
|
|
//
|
|
|
|
#if HAS_FILAMENT_SENSOR
|
|
runout.enabled = true;
|
|
runout.reset();
|
|
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
|
|
runout.set_runout_distance(FILAMENT_RUNOUT_DISTANCE_MM);
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Tool-change Settings
|
|
//
|
|
|
|
#if EXTRUDERS > 1
|
|
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
|
|
toolchange_settings.swap_length = TOOLCHANGE_FS_LENGTH;
|
|
toolchange_settings.extra_resume = TOOLCHANGE_FS_EXTRA_RESUME_LENGTH;
|
|
toolchange_settings.retract_speed = TOOLCHANGE_FS_RETRACT_SPEED;
|
|
toolchange_settings.unretract_speed = TOOLCHANGE_FS_UNRETRACT_SPEED;
|
|
toolchange_settings.extra_prime = TOOLCHANGE_FS_EXTRA_PRIME;
|
|
toolchange_settings.prime_speed = TOOLCHANGE_FS_PRIME_SPEED;
|
|
toolchange_settings.fan_speed = TOOLCHANGE_FS_FAN_SPEED;
|
|
toolchange_settings.fan_time = TOOLCHANGE_FS_FAN_TIME;
|
|
#endif
|
|
|
|
#if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED)
|
|
enable_first_prime = false;
|
|
#endif
|
|
|
|
#if ENABLED(TOOLCHANGE_PARK)
|
|
constexpr xyz_pos_t tpxy = TOOLCHANGE_PARK_XY;
|
|
toolchange_settings.enable_park = true;
|
|
toolchange_settings.change_point = tpxy;
|
|
#endif
|
|
|
|
toolchange_settings.z_raise = TOOLCHANGE_ZRAISE;
|
|
|
|
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
|
|
migration = migration_defaults;
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
backlash.correction = (BACKLASH_CORRECTION) * 255;
|
|
constexpr xyz_float_t tmp = BACKLASH_DISTANCE_MM;
|
|
backlash.distance_mm = tmp;
|
|
#ifdef BACKLASH_SMOOTHING_MM
|
|
backlash.smoothing_mm = BACKLASH_SMOOTHING_MM;
|
|
#endif
|
|
#endif
|
|
|
|
TERN_(EXTENSIBLE_UI, ExtUI::onFactoryReset());
|
|
|
|
//
|
|
// Case Light Brightness
|
|
//
|
|
TERN_(HAS_CASE_LIGHT_BRIGHTNESS, case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS);
|
|
|
|
//
|
|
// Magnetic Parking Extruder
|
|
//
|
|
TERN_(MAGNETIC_PARKING_EXTRUDER, mpe_settings_init());
|
|
|
|
//
|
|
// Global Leveling
|
|
//
|
|
TERN_(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height = 0.0);
|
|
TERN_(HAS_LEVELING, reset_bed_level());
|
|
|
|
#if HAS_BED_PROBE
|
|
constexpr float dpo[] = NOZZLE_TO_PROBE_OFFSET;
|
|
static_assert(COUNT(dpo) == 3, "NOZZLE_TO_PROBE_OFFSET must contain offsets for X, Y, and Z.");
|
|
#if HAS_PROBE_XY_OFFSET
|
|
LOOP_XYZ(a) probe.offset[a] = dpo[a];
|
|
#else
|
|
probe.offset.x = probe.offset.y = 0;
|
|
probe.offset.z = dpo[Z_AXIS];
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Z Stepper Auto-alignment points
|
|
//
|
|
TERN_(Z_STEPPER_AUTO_ALIGN, z_stepper_align.reset_to_default());
|
|
|
|
//
|
|
// Servo Angles
|
|
//
|
|
TERN_(EDITABLE_SERVO_ANGLES, COPY(servo_angles, base_servo_angles)); // When not editable only one copy of servo angles exists
|
|
|
|
//
|
|
// BLTOUCH
|
|
//
|
|
//#if ENABLED(BLTOUCH)
|
|
// bltouch.last_written_mode;
|
|
//#endif
|
|
|
|
//
|
|
// Endstop Adjustments
|
|
//
|
|
|
|
#if ENABLED(DELTA)
|
|
const abc_float_t adj = DELTA_ENDSTOP_ADJ, dta = DELTA_TOWER_ANGLE_TRIM;
|
|
delta_height = DELTA_HEIGHT;
|
|
delta_endstop_adj = adj;
|
|
delta_radius = DELTA_RADIUS;
|
|
delta_diagonal_rod = DELTA_DIAGONAL_ROD;
|
|
delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
|
|
delta_tower_angle_trim = dta;
|
|
#endif
|
|
|
|
#if ENABLED(X_DUAL_ENDSTOPS)
|
|
#ifndef X2_ENDSTOP_ADJUSTMENT
|
|
#define X2_ENDSTOP_ADJUSTMENT 0
|
|
#endif
|
|
endstops.x2_endstop_adj = X2_ENDSTOP_ADJUSTMENT;
|
|
#endif
|
|
|
|
#if ENABLED(Y_DUAL_ENDSTOPS)
|
|
#ifndef Y2_ENDSTOP_ADJUSTMENT
|
|
#define Y2_ENDSTOP_ADJUSTMENT 0
|
|
#endif
|
|
endstops.y2_endstop_adj = Y2_ENDSTOP_ADJUSTMENT;
|
|
#endif
|
|
|
|
#if ENABLED(Z_MULTI_ENDSTOPS)
|
|
#ifndef Z2_ENDSTOP_ADJUSTMENT
|
|
#define Z2_ENDSTOP_ADJUSTMENT 0
|
|
#endif
|
|
endstops.z2_endstop_adj = Z2_ENDSTOP_ADJUSTMENT;
|
|
#if NUM_Z_STEPPER_DRIVERS >= 3
|
|
#ifndef Z3_ENDSTOP_ADJUSTMENT
|
|
#define Z3_ENDSTOP_ADJUSTMENT 0
|
|
#endif
|
|
endstops.z3_endstop_adj = Z3_ENDSTOP_ADJUSTMENT;
|
|
#endif
|
|
#if NUM_Z_STEPPER_DRIVERS >= 4
|
|
#ifndef Z4_ENDSTOP_ADJUSTMENT
|
|
#define Z4_ENDSTOP_ADJUSTMENT 0
|
|
#endif
|
|
endstops.z4_endstop_adj = Z4_ENDSTOP_ADJUSTMENT;
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Preheat parameters
|
|
//
|
|
|
|
#if HAS_HOTEND && HAS_LCD_MENU
|
|
ui.preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
|
|
ui.preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
|
|
ui.preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
|
|
ui.preheat_bed_temp[1] = PREHEAT_2_TEMP_BED;
|
|
ui.preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED;
|
|
ui.preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED;
|
|
#endif
|
|
|
|
//
|
|
// Hotend PID
|
|
//
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
HOTEND_LOOP() {
|
|
PID_PARAM(Kp, e) = float(DEFAULT_Kp);
|
|
PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki);
|
|
PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd);
|
|
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = DEFAULT_Kc);
|
|
TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = DEFAULT_Kf);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// PID Extrusion Scaling
|
|
//
|
|
TERN_(PID_EXTRUSION_SCALING, thermalManager.lpq_len = 20); // Default last-position-queue size
|
|
|
|
//
|
|
// Heated Bed PID
|
|
//
|
|
|
|
#if ENABLED(PIDTEMPBED)
|
|
thermalManager.temp_bed.pid.Kp = DEFAULT_bedKp;
|
|
thermalManager.temp_bed.pid.Ki = scalePID_i(DEFAULT_bedKi);
|
|
thermalManager.temp_bed.pid.Kd = scalePID_d(DEFAULT_bedKd);
|
|
#endif
|
|
|
|
//
|
|
// User-Defined Thermistors
|
|
//
|
|
TERN_(HAS_USER_THERMISTORS, thermalManager.reset_user_thermistors());
|
|
|
|
//
|
|
// LCD Contrast
|
|
//
|
|
TERN_(HAS_LCD_CONTRAST, ui.set_contrast(DEFAULT_LCD_CONTRAST));
|
|
|
|
//
|
|
// Controller Fan
|
|
//
|
|
TERN_(USE_CONTROLLER_FAN, controllerFan.reset());
|
|
|
|
//
|
|
// Power-Loss Recovery
|
|
//
|
|
TERN_(POWER_LOSS_RECOVERY, recovery.enable(ENABLED(PLR_ENABLED_DEFAULT)));
|
|
|
|
//
|
|
// Firmware Retraction
|
|
//
|
|
TERN_(FWRETRACT, fwretract.reset());
|
|
|
|
//
|
|
// Volumetric & Filament Size
|
|
//
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
parser.volumetric_enabled = ENABLED(VOLUMETRIC_DEFAULT_ON);
|
|
LOOP_L_N(q, COUNT(planner.filament_size))
|
|
planner.filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA;
|
|
#endif
|
|
|
|
endstops.enable_globally(ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT));
|
|
|
|
reset_stepper_drivers();
|
|
|
|
//
|
|
// Linear Advance
|
|
//
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
LOOP_L_N(i, EXTRUDERS) {
|
|
planner.extruder_advance_K[i] = LIN_ADVANCE_K;
|
|
TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[i] = LIN_ADVANCE_K);
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Motor Current PWM
|
|
//
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
constexpr uint32_t tmp_motor_current_setting[3] = PWM_MOTOR_CURRENT;
|
|
LOOP_L_N(q, 3)
|
|
stepper.digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q]));
|
|
#endif
|
|
|
|
//
|
|
// CNC Coordinate System
|
|
//
|
|
TERN_(CNC_COORDINATE_SYSTEMS, (void)gcode.select_coordinate_system(-1)); // Go back to machine space
|
|
|
|
//
|
|
// Skew Correction
|
|
//
|
|
#if ENABLED(SKEW_CORRECTION_GCODE)
|
|
planner.skew_factor.xy = XY_SKEW_FACTOR;
|
|
#if ENABLED(SKEW_CORRECTION_FOR_Z)
|
|
planner.skew_factor.xz = XZ_SKEW_FACTOR;
|
|
planner.skew_factor.yz = YZ_SKEW_FACTOR;
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Advanced Pause filament load & unload lengths
|
|
//
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
LOOP_L_N(e, EXTRUDERS) {
|
|
fc_settings[e].unload_length = FILAMENT_CHANGE_UNLOAD_LENGTH;
|
|
fc_settings[e].load_length = FILAMENT_CHANGE_FAST_LOAD_LENGTH;
|
|
}
|
|
#endif
|
|
|
|
postprocess();
|
|
|
|
DEBUG_ECHO_START();
|
|
DEBUG_ECHOLNPGM("Hardcoded Default Settings Loaded");
|
|
|
|
TERN_(EXTENSIBLE_UI, ExtUI::onFactoryReset());
|
|
}
|
|
|
|
#if DISABLED(DISABLE_M503)
|
|
|
|
static void config_heading(const bool repl, PGM_P const pstr, const bool eol=true) {
|
|
if (!repl) {
|
|
SERIAL_ECHO_START();
|
|
SERIAL_ECHOPGM("; ");
|
|
serialprintPGM(pstr);
|
|
if (eol) SERIAL_EOL();
|
|
}
|
|
}
|
|
|
|
#define CONFIG_ECHO_START() do{ if (!forReplay) SERIAL_ECHO_START(); }while(0)
|
|
#define CONFIG_ECHO_MSG(STR) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
|
|
#define CONFIG_ECHO_HEADING(STR) config_heading(forReplay, PSTR(STR))
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M906"); }
|
|
#if HAS_STEALTHCHOP
|
|
void say_M569(const bool forReplay, const char * const etc=nullptr, const bool newLine = false) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPGM(" M569 S1");
|
|
if (etc) {
|
|
SERIAL_CHAR(' ');
|
|
serialprintPGM(etc);
|
|
}
|
|
if (newLine) SERIAL_EOL();
|
|
}
|
|
#endif
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
inline void say_M913(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M913"); }
|
|
#endif
|
|
#if USE_SENSORLESS
|
|
inline void say_M914() { SERIAL_ECHOPGM(" M914"); }
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
inline void say_M603(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M603 "); }
|
|
#endif
|
|
|
|
inline void say_units(const bool colon) {
|
|
serialprintPGM(
|
|
#if ENABLED(INCH_MODE_SUPPORT)
|
|
parser.linear_unit_factor != 1.0 ? PSTR(" (in)") :
|
|
#endif
|
|
PSTR(" (mm)")
|
|
);
|
|
if (colon) SERIAL_ECHOLNPGM(":");
|
|
}
|
|
|
|
void report_M92(const bool echo=true, const int8_t e=-1);
|
|
|
|
/**
|
|
* M503 - Report current settings in RAM
|
|
*
|
|
* Unless specifically disabled, M503 is available even without EEPROM
|
|
*/
|
|
void MarlinSettings::report(const bool forReplay) {
|
|
/**
|
|
* Announce current units, in case inches are being displayed
|
|
*/
|
|
CONFIG_ECHO_START();
|
|
#if ENABLED(INCH_MODE_SUPPORT)
|
|
SERIAL_ECHOPGM(" G2");
|
|
SERIAL_CHAR(parser.linear_unit_factor == 1.0 ? '1' : '0');
|
|
SERIAL_ECHOPGM(" ;");
|
|
say_units(false);
|
|
#else
|
|
SERIAL_ECHOPGM(" G21 ; Units in mm");
|
|
say_units(false);
|
|
#endif
|
|
SERIAL_EOL();
|
|
|
|
#if HAS_LCD_MENU
|
|
|
|
// Temperature units - for Ultipanel temperature options
|
|
|
|
CONFIG_ECHO_START();
|
|
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
|
|
SERIAL_ECHOPGM(" M149 ");
|
|
SERIAL_CHAR(parser.temp_units_code());
|
|
SERIAL_ECHOPGM(" ; Units in ");
|
|
serialprintPGM(parser.temp_units_name());
|
|
#else
|
|
SERIAL_ECHOLNPGM(" M149 C ; Units in Celsius");
|
|
#endif
|
|
|
|
#endif
|
|
|
|
SERIAL_EOL();
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
|
|
/**
|
|
* Volumetric extrusion M200
|
|
*/
|
|
if (!forReplay) {
|
|
config_heading(forReplay, PSTR("Filament settings:"), false);
|
|
if (parser.volumetric_enabled)
|
|
SERIAL_EOL();
|
|
else
|
|
SERIAL_ECHOLNPGM(" Disabled");
|
|
}
|
|
|
|
#if EXTRUDERS == 1
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
|
|
#elif EXTRUDERS
|
|
LOOP_L_N(i, EXTRUDERS) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPGM(" M200");
|
|
if (i) SERIAL_ECHOPAIR_P(SP_T_STR, int(i));
|
|
SERIAL_ECHOLNPAIR(" D", LINEAR_UNIT(planner.filament_size[i]));
|
|
}
|
|
#endif
|
|
|
|
if (!parser.volumetric_enabled)
|
|
CONFIG_ECHO_MSG(" M200 D0");
|
|
|
|
#endif // !NO_VOLUMETRICS
|
|
|
|
CONFIG_ECHO_HEADING("Steps per unit:");
|
|
report_M92(!forReplay);
|
|
|
|
CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M203 X"), LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])
|
|
, SP_Y_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])
|
|
, SP_Z_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])
|
|
#if DISABLED(DISTINCT_E_FACTORS)
|
|
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
|
|
#endif
|
|
);
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
LOOP_L_N(i, E_STEPPERS) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M203 T"), (int)i
|
|
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
|
|
);
|
|
}
|
|
#endif
|
|
|
|
CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M201 X"), LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])
|
|
, SP_Y_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])
|
|
, SP_Z_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])
|
|
#if DISABLED(DISTINCT_E_FACTORS)
|
|
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
|
|
#endif
|
|
);
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
LOOP_L_N(i, E_STEPPERS) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M201 T"), (int)i
|
|
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
|
|
);
|
|
}
|
|
#endif
|
|
|
|
CONFIG_ECHO_HEADING("Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M204 P"), LINEAR_UNIT(planner.settings.acceleration)
|
|
, PSTR(" R"), LINEAR_UNIT(planner.settings.retract_acceleration)
|
|
, SP_T_STR, LINEAR_UNIT(planner.settings.travel_acceleration)
|
|
);
|
|
|
|
CONFIG_ECHO_HEADING(
|
|
"Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate>"
|
|
#if HAS_JUNCTION_DEVIATION
|
|
" J<junc_dev>"
|
|
#endif
|
|
#if HAS_CLASSIC_JERK
|
|
" X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk>"
|
|
TERN_(HAS_CLASSIC_E_JERK, " E<max_e_jerk>")
|
|
#endif
|
|
);
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M205 B"), LINEAR_UNIT(planner.settings.min_segment_time_us)
|
|
, PSTR(" S"), LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
|
|
, SP_T_STR, LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
|
|
#if HAS_JUNCTION_DEVIATION
|
|
, PSTR(" J"), LINEAR_UNIT(planner.junction_deviation_mm)
|
|
#endif
|
|
#if HAS_CLASSIC_JERK
|
|
, SP_X_STR, LINEAR_UNIT(planner.max_jerk.x)
|
|
, SP_Y_STR, LINEAR_UNIT(planner.max_jerk.y)
|
|
, SP_Z_STR, LINEAR_UNIT(planner.max_jerk.z)
|
|
#if HAS_CLASSIC_E_JERK
|
|
, SP_E_STR, LINEAR_UNIT(planner.max_jerk.e)
|
|
#endif
|
|
#endif
|
|
);
|
|
|
|
#if HAS_M206_COMMAND
|
|
CONFIG_ECHO_HEADING("Home offset:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
#if IS_CARTESIAN
|
|
PSTR(" M206 X"), LINEAR_UNIT(home_offset.x)
|
|
, SP_Y_STR, LINEAR_UNIT(home_offset.y)
|
|
, SP_Z_STR
|
|
#else
|
|
PSTR(" M206 Z")
|
|
#endif
|
|
, LINEAR_UNIT(home_offset.z)
|
|
);
|
|
#endif
|
|
|
|
#if HAS_HOTEND_OFFSET
|
|
CONFIG_ECHO_HEADING("Hotend offsets:");
|
|
CONFIG_ECHO_START();
|
|
LOOP_S_L_N(e, 1, HOTENDS) {
|
|
SERIAL_ECHOPAIR_P(
|
|
PSTR(" M218 T"), (int)e,
|
|
SP_X_STR, LINEAR_UNIT(hotend_offset[e].x),
|
|
SP_Y_STR, LINEAR_UNIT(hotend_offset[e].y)
|
|
);
|
|
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(hotend_offset[e].z), 3);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Bed Leveling
|
|
*/
|
|
#if HAS_LEVELING
|
|
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
|
|
CONFIG_ECHO_HEADING("Mesh Bed Leveling:");
|
|
|
|
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
config_heading(forReplay, PSTR(""), false);
|
|
if (!forReplay) {
|
|
ubl.echo_name();
|
|
SERIAL_CHAR(':');
|
|
SERIAL_EOL();
|
|
}
|
|
|
|
#elif HAS_ABL_OR_UBL
|
|
|
|
CONFIG_ECHO_HEADING("Auto Bed Leveling:");
|
|
|
|
#endif
|
|
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M420 S"), planner.leveling_active ? 1 : 0
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
, SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)
|
|
#endif
|
|
);
|
|
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
|
|
if (leveling_is_valid()) {
|
|
LOOP_L_N(py, GRID_MAX_POINTS_Y) {
|
|
LOOP_L_N(px, GRID_MAX_POINTS_X) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPAIR_P(PSTR(" G29 S3 I"), (int)px, PSTR(" J"), (int)py);
|
|
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(mbl.z_values[px][py]), 5);
|
|
}
|
|
}
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_F_P(PSTR(" G29 S4 Z"), LINEAR_UNIT(mbl.z_offset), 5);
|
|
}
|
|
|
|
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
if (!forReplay) {
|
|
SERIAL_EOL();
|
|
ubl.report_state();
|
|
SERIAL_EOL();
|
|
config_heading(false, PSTR("Active Mesh Slot: "), false);
|
|
SERIAL_ECHOLN(ubl.storage_slot);
|
|
config_heading(false, PSTR("EEPROM can hold "), false);
|
|
SERIAL_ECHO(calc_num_meshes());
|
|
SERIAL_ECHOLNPGM(" meshes.\n");
|
|
}
|
|
|
|
//ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse)
|
|
// solution needs to be found.
|
|
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
|
|
if (leveling_is_valid()) {
|
|
LOOP_L_N(py, GRID_MAX_POINTS_Y) {
|
|
LOOP_L_N(px, GRID_MAX_POINTS_X) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPAIR(" G29 W I", (int)px, " J", (int)py);
|
|
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(z_values[px][py]), 5);
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
#endif // HAS_LEVELING
|
|
|
|
#if ENABLED(EDITABLE_SERVO_ANGLES)
|
|
|
|
CONFIG_ECHO_HEADING("Servo Angles:");
|
|
LOOP_L_N(i, NUM_SERVOS) {
|
|
switch (i) {
|
|
#if ENABLED(SWITCHING_EXTRUDER)
|
|
case SWITCHING_EXTRUDER_SERVO_NR:
|
|
#if EXTRUDERS > 3
|
|
case SWITCHING_EXTRUDER_E23_SERVO_NR:
|
|
#endif
|
|
#elif ENABLED(SWITCHING_NOZZLE)
|
|
case SWITCHING_NOZZLE_SERVO_NR:
|
|
#elif ENABLED(BLTOUCH) || (HAS_Z_SERVO_PROBE && defined(Z_SERVO_ANGLES))
|
|
case Z_PROBE_SERVO_NR:
|
|
#endif
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]);
|
|
default: break;
|
|
}
|
|
}
|
|
|
|
#endif // EDITABLE_SERVO_ANGLES
|
|
|
|
#if HAS_SCARA_OFFSET
|
|
|
|
CONFIG_ECHO_HEADING("SCARA settings: S<seg-per-sec> P<theta-psi-offset> T<theta-offset>");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M665 S"), delta_segments_per_second
|
|
, SP_P_STR, scara_home_offset.a
|
|
, SP_T_STR, scara_home_offset.b
|
|
, SP_Z_STR, LINEAR_UNIT(scara_home_offset.z)
|
|
);
|
|
|
|
#elif ENABLED(DELTA)
|
|
|
|
CONFIG_ECHO_HEADING("Endstop adjustment:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
|
|
, SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
|
|
, SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
|
|
);
|
|
|
|
CONFIG_ECHO_HEADING("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> XYZ<tower angle corrections>");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M665 L"), LINEAR_UNIT(delta_diagonal_rod)
|
|
, PSTR(" R"), LINEAR_UNIT(delta_radius)
|
|
, PSTR(" H"), LINEAR_UNIT(delta_height)
|
|
, PSTR(" S"), delta_segments_per_second
|
|
, SP_X_STR, LINEAR_UNIT(delta_tower_angle_trim.a)
|
|
, SP_Y_STR, LINEAR_UNIT(delta_tower_angle_trim.b)
|
|
, SP_Z_STR, LINEAR_UNIT(delta_tower_angle_trim.c)
|
|
);
|
|
|
|
#elif HAS_EXTRA_ENDSTOPS
|
|
|
|
CONFIG_ECHO_HEADING("Endstop adjustment:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPGM(" M666");
|
|
#if ENABLED(X_DUAL_ENDSTOPS)
|
|
SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
|
|
#endif
|
|
#if ENABLED(Y_DUAL_ENDSTOPS)
|
|
SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
|
|
#endif
|
|
#if ENABLED(Z_MULTI_ENDSTOPS)
|
|
#if NUM_Z_STEPPER_DRIVERS >= 3
|
|
SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
|
|
#if NUM_Z_STEPPER_DRIVERS >= 4
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj));
|
|
#endif
|
|
#else
|
|
SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
|
|
#endif
|
|
#endif
|
|
|
|
#endif // [XYZ]_DUAL_ENDSTOPS
|
|
|
|
#if HAS_HOTEND && HAS_LCD_MENU
|
|
|
|
CONFIG_ECHO_HEADING("Material heatup parameters:");
|
|
LOOP_L_N(i, COUNT(ui.preheat_hotend_temp)) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(
|
|
" M145 S", (int)i
|
|
, " H", TEMP_UNIT(ui.preheat_hotend_temp[i])
|
|
, " B", TEMP_UNIT(ui.preheat_bed_temp[i])
|
|
, " F", int(ui.preheat_fan_speed[i])
|
|
);
|
|
}
|
|
|
|
#endif
|
|
|
|
#if HAS_PID_HEATING
|
|
|
|
CONFIG_ECHO_HEADING("PID settings:");
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
HOTEND_LOOP() {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOPAIR_P(
|
|
#if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
|
|
PSTR(" M301 E"), e,
|
|
SP_P_STR
|
|
#else
|
|
PSTR(" M301 P")
|
|
#endif
|
|
, PID_PARAM(Kp, e)
|
|
, PSTR(" I"), unscalePID_i(PID_PARAM(Ki, e))
|
|
, PSTR(" D"), unscalePID_d(PID_PARAM(Kd, e))
|
|
);
|
|
#if ENABLED(PID_EXTRUSION_SCALING)
|
|
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
|
|
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
|
|
#endif
|
|
#if ENABLED(PID_FAN_SCALING)
|
|
SERIAL_ECHOPAIR(" F", PID_PARAM(Kf, e));
|
|
#endif
|
|
SERIAL_EOL();
|
|
}
|
|
#endif // PIDTEMP
|
|
|
|
#if ENABLED(PIDTEMPBED)
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(
|
|
" M304 P", thermalManager.temp_bed.pid.Kp
|
|
, " I", unscalePID_i(thermalManager.temp_bed.pid.Ki)
|
|
, " D", unscalePID_d(thermalManager.temp_bed.pid.Kd)
|
|
);
|
|
#endif
|
|
|
|
#endif // PIDTEMP || PIDTEMPBED
|
|
|
|
#if HAS_USER_THERMISTORS
|
|
CONFIG_ECHO_HEADING("User thermistors:");
|
|
LOOP_L_N(i, USER_THERMISTORS)
|
|
thermalManager.log_user_thermistor(i, true);
|
|
#endif
|
|
|
|
#if HAS_LCD_CONTRAST
|
|
CONFIG_ECHO_HEADING("LCD Contrast:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M250 C", ui.contrast);
|
|
#endif
|
|
|
|
TERN_(CONTROLLER_FAN_EDITABLE, M710_report(forReplay));
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
CONFIG_ECHO_HEADING("Power-Loss Recovery:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M413 S", int(recovery.enabled));
|
|
#endif
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
|
|
CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M207 S"), LINEAR_UNIT(fwretract.settings.retract_length)
|
|
, PSTR(" W"), LINEAR_UNIT(fwretract.settings.swap_retract_length)
|
|
, PSTR(" F"), LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_feedrate_mm_s))
|
|
, SP_Z_STR, LINEAR_UNIT(fwretract.settings.retract_zraise)
|
|
);
|
|
|
|
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(
|
|
" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_extra)
|
|
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_extra)
|
|
, " F", LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_recover_feedrate_mm_s))
|
|
);
|
|
|
|
#if ENABLED(FWRETRACT_AUTORETRACT)
|
|
|
|
CONFIG_ECHO_HEADING("Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M209 S", fwretract.autoretract_enabled ? 1 : 0);
|
|
|
|
#endif // FWRETRACT_AUTORETRACT
|
|
|
|
#endif // FWRETRACT
|
|
|
|
/**
|
|
* Probe Offset
|
|
*/
|
|
#if HAS_BED_PROBE
|
|
config_heading(forReplay, PSTR("Z-Probe Offset"), false);
|
|
if (!forReplay) say_units(true);
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
#if HAS_PROBE_XY_OFFSET
|
|
PSTR(" M851 X"), LINEAR_UNIT(probe.offset_xy.x),
|
|
SP_Y_STR, LINEAR_UNIT(probe.offset_xy.y),
|
|
SP_Z_STR
|
|
#else
|
|
PSTR(" M851 X0 Y0 Z")
|
|
#endif
|
|
, LINEAR_UNIT(probe.offset.z)
|
|
);
|
|
#endif
|
|
|
|
/**
|
|
* Bed Skew Correction
|
|
*/
|
|
#if ENABLED(SKEW_CORRECTION_GCODE)
|
|
CONFIG_ECHO_HEADING("Skew Factor: ");
|
|
CONFIG_ECHO_START();
|
|
#if ENABLED(SKEW_CORRECTION_FOR_Z)
|
|
SERIAL_ECHOPAIR_F(" M852 I", LINEAR_UNIT(planner.skew_factor.xy), 6);
|
|
SERIAL_ECHOPAIR_F(" J", LINEAR_UNIT(planner.skew_factor.xz), 6);
|
|
SERIAL_ECHOLNPAIR_F(" K", LINEAR_UNIT(planner.skew_factor.yz), 6);
|
|
#else
|
|
SERIAL_ECHOLNPAIR_F(" M852 S", LINEAR_UNIT(planner.skew_factor.xy), 6);
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
|
|
/**
|
|
* TMC stepper driver current
|
|
*/
|
|
CONFIG_ECHO_HEADING("Stepper driver current:");
|
|
|
|
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
|
|
say_M906(forReplay);
|
|
#if AXIS_IS_TMC(X)
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(Y)
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(Z)
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.getMilliamps());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOPGM(" I1");
|
|
#if AXIS_IS_TMC(X2)
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(Y2)
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(Z2)
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.getMilliamps());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if AXIS_IS_TMC(Z3)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
|
|
#endif
|
|
|
|
#if AXIS_IS_TMC(Z4)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.getMilliamps());
|
|
#endif
|
|
|
|
#if AXIS_IS_TMC(E0)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E1)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E2)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E3)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E4)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E5)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E6)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.getMilliamps());
|
|
#endif
|
|
#if AXIS_IS_TMC(E7)
|
|
say_M906(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.getMilliamps());
|
|
#endif
|
|
SERIAL_EOL();
|
|
|
|
/**
|
|
* TMC Hybrid Threshold
|
|
*/
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
CONFIG_ECHO_HEADING("Hybrid Threshold:");
|
|
#if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Z)
|
|
say_M913(forReplay);
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.get_pwm_thrs());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z2)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOPGM(" I1");
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.get_pwm_thrs());
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.get_pwm_thrs());
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.get_pwm_thrs());
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
say_M913(forReplay);
|
|
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.get_pwm_thrs());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif // HYBRID_THRESHOLD
|
|
|
|
/**
|
|
* TMC Sensorless homing thresholds
|
|
*/
|
|
#if USE_SENSORLESS
|
|
CONFIG_ECHO_HEADING("StallGuard threshold:");
|
|
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
|
|
CONFIG_ECHO_START();
|
|
say_M914();
|
|
#if X_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.homing_threshold());
|
|
#endif
|
|
#if Y_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.homing_threshold());
|
|
#endif
|
|
#if Z_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.homing_threshold());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if X2_SENSORLESS || Y2_SENSORLESS || Z2_SENSORLESS
|
|
CONFIG_ECHO_START();
|
|
say_M914();
|
|
SERIAL_ECHOPGM(" I1");
|
|
#if X2_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.homing_threshold());
|
|
#endif
|
|
#if Y2_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.homing_threshold());
|
|
#endif
|
|
#if Z2_SENSORLESS
|
|
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.homing_threshold());
|
|
#endif
|
|
SERIAL_EOL();
|
|
#endif
|
|
|
|
#if Z3_SENSORLESS
|
|
CONFIG_ECHO_START();
|
|
say_M914();
|
|
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.homing_threshold());
|
|
#endif
|
|
|
|
#if Z4_SENSORLESS
|
|
CONFIG_ECHO_START();
|
|
say_M914();
|
|
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.homing_threshold());
|
|
#endif
|
|
|
|
#endif // USE_SENSORLESS
|
|
|
|
/**
|
|
* TMC stepping mode
|
|
*/
|
|
#if HAS_STEALTHCHOP
|
|
CONFIG_ECHO_HEADING("Driver stepping mode:");
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
const bool chop_x = stepperX.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_x = false;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
const bool chop_y = stepperY.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_y = false;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
const bool chop_z = stepperZ.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_z = false;
|
|
#endif
|
|
|
|
if (chop_x || chop_y || chop_z) {
|
|
say_M569(forReplay);
|
|
if (chop_x) SERIAL_ECHOPGM_P(SP_X_STR);
|
|
if (chop_y) SERIAL_ECHOPGM_P(SP_Y_STR);
|
|
if (chop_z) SERIAL_ECHOPGM_P(SP_Z_STR);
|
|
SERIAL_EOL();
|
|
}
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(X2)
|
|
const bool chop_x2 = stepperX2.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_x2 = false;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y2)
|
|
const bool chop_y2 = stepperY2.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_y2 = false;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z2)
|
|
const bool chop_z2 = stepperZ2.get_stealthChop_status();
|
|
#else
|
|
constexpr bool chop_z2 = false;
|
|
#endif
|
|
|
|
if (chop_x2 || chop_y2 || chop_z2) {
|
|
say_M569(forReplay, PSTR("I1"));
|
|
if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
|
|
if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
|
|
if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
|
|
SERIAL_EOL();
|
|
}
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(Z3)
|
|
if (stepperZ3.get_stealthChop_status()) { say_M569(forReplay, PSTR("I2 Z"), true); }
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(Z4)
|
|
if (stepperZ4.get_stealthChop_status()) { say_M569(forReplay, PSTR("I3 Z"), true); }
|
|
#endif
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
if (stepperE0.get_stealthChop_status()) { say_M569(forReplay, PSTR("T0 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
if (stepperE1.get_stealthChop_status()) { say_M569(forReplay, PSTR("T1 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E2)
|
|
if (stepperE2.get_stealthChop_status()) { say_M569(forReplay, PSTR("T2 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E3)
|
|
if (stepperE3.get_stealthChop_status()) { say_M569(forReplay, PSTR("T3 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E4)
|
|
if (stepperE4.get_stealthChop_status()) { say_M569(forReplay, PSTR("T4 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E5)
|
|
if (stepperE5.get_stealthChop_status()) { say_M569(forReplay, PSTR("T5 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E6)
|
|
if (stepperE6.get_stealthChop_status()) { say_M569(forReplay, PSTR("T6 E"), true); }
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E7)
|
|
if (stepperE7.get_stealthChop_status()) { say_M569(forReplay, PSTR("T7 E"), true); }
|
|
#endif
|
|
|
|
#endif // HAS_STEALTHCHOP
|
|
|
|
#endif // HAS_TRINAMIC_CONFIG
|
|
|
|
/**
|
|
* Linear Advance
|
|
*/
|
|
#if ENABLED(LIN_ADVANCE)
|
|
CONFIG_ECHO_HEADING("Linear Advance:");
|
|
#if EXTRUDERS < 2
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
|
|
#else
|
|
LOOP_L_N(i, EXTRUDERS) {
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(" M900 T", int(i), " K", planner.extruder_advance_K[i]);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
CONFIG_ECHO_HEADING("Stepper motor currents:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M907 X"), stepper.motor_current_setting[0]
|
|
, SP_Z_STR, stepper.motor_current_setting[1]
|
|
, SP_E_STR, stepper.motor_current_setting[2]
|
|
);
|
|
#endif
|
|
|
|
/**
|
|
* Advanced Pause filament load & unload lengths
|
|
*/
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
CONFIG_ECHO_HEADING("Filament load/unload lengths:");
|
|
#if EXTRUDERS == 1
|
|
say_M603(forReplay);
|
|
SERIAL_ECHOLNPAIR("L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length));
|
|
#else
|
|
#define _ECHO_603(N) do{ say_M603(forReplay); SERIAL_ECHOLNPAIR("T" STRINGIFY(N) " L", LINEAR_UNIT(fc_settings[N].load_length), " U", LINEAR_UNIT(fc_settings[N].unload_length)); }while(0);
|
|
REPEAT(EXTRUDERS, _ECHO_603)
|
|
#endif
|
|
#endif
|
|
|
|
#if EXTRUDERS > 1
|
|
CONFIG_ECHO_HEADING("Tool-changing:");
|
|
CONFIG_ECHO_START();
|
|
M217_report(true);
|
|
#endif
|
|
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
CONFIG_ECHO_HEADING("Backlash compensation:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR_P(
|
|
PSTR(" M425 F"), backlash.get_correction()
|
|
, SP_X_STR, LINEAR_UNIT(backlash.distance_mm.x)
|
|
, SP_Y_STR, LINEAR_UNIT(backlash.distance_mm.y)
|
|
, SP_Z_STR, LINEAR_UNIT(backlash.distance_mm.z)
|
|
#ifdef BACKLASH_SMOOTHING_MM
|
|
, PSTR(" S"), LINEAR_UNIT(backlash.smoothing_mm)
|
|
#endif
|
|
);
|
|
#endif
|
|
|
|
#if HAS_FILAMENT_SENSOR
|
|
CONFIG_ECHO_HEADING("Filament runout sensor:");
|
|
CONFIG_ECHO_START();
|
|
SERIAL_ECHOLNPAIR(
|
|
" M412 S", int(runout.enabled)
|
|
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
|
|
, " D", LINEAR_UNIT(runout.runout_distance())
|
|
#endif
|
|
);
|
|
#endif
|
|
}
|
|
|
|
#endif // !DISABLE_M503
|
|
|
|
#pragma pack(pop)
|