This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.

Ronald f303129fb6 Changed 1284p fuse setting for 8, 16 and 20 Mhz ... Symtopns: - X axis move in one direction - limit switches fail to trigger - unable to reprogram the device via bootloader - stops working when the reset switch is pressed. - device fails to bootup when power by a slow raise power supply. Solution: - Disabled the jtag - set the correct clock selection bit - set the correct bootloader memory size - enable brown-out setting - enable clock power up delay		2014-02-02 13:13:15 +00:00
..
bootloaders	Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h	2013-05-02 09:22:58 -07:00
cores/arduino	Switched to Sanguino 0023r4	2013-02-27 22:29:46 +01:00
boards.txt	Changed 1284p fuse setting for 8, 16 and 20 Mhz	2014-02-02 13:13:15 +00:00
programmers.txt	Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.	2012-12-10 12:02:29 +01:00