This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/pins_CNCONTROLS_12.h
Anthony Birkett 7a377c1d75 Add "About Printer" information menu.
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
2016-07-02 15:22:26 -07:00

105 lines
2.9 KiB
C

/**
* CartesioV12 pin assignments
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define BOARD_NAME "CN Controls V12"
//#define LARGE_FLASH true
#define X_ENABLE_PIN 26
#define X_STEP_PIN 25
#define X_DIR_PIN 27
#define X_MIN_PIN 19
#define X_MAX_PIN -1
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 28
#define Y_DIR_PIN 30
#define Y_MIN_PIN 22
#define Y_MAX_PIN -1
#define Z_ENABLE_PIN 32
#define Z_STEP_PIN 31
#define Z_DIR_PIN 33
#define Z_MIN_PIN 23
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 58
#define E0_STEP_PIN 57
#define E0_DIR_PIN 55
#define HEATER_0_PIN 11
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define HEATER_1_PIN 9
#define TEMP_1_PIN 9 // 9 for tool3 -> 13 for chambertemp
#define E2_ENABLE_PIN 44
#define E2_STEP_PIN 46
#define E2_DIR_PIN 66
#define HEATER_2_PIN 6
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 45
#define E3_DIR_PIN 69
#define HEATER_3_PIN 3
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
#define HEATER_BED_PIN 24
#define TEMP_BED_PIN 14 // ANALOG INPUT !!
// Tools
//#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2
// Common I/O
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !!
#define FIL_RUNOUT_PIN 18
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
// User interface
#define BEEPER_PIN 16
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#define LCD_SCREEN_ROT_180
// The encoder and click button
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 42
#define SHIFT_LD 41
#define SHIFT_CLK 40
//#define UI1 43
//#define UI2 37
// Other
#define SDSS 53
#define SD_DETECT_PIN 15
#define STAT_LED_BLUE -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN