4183a249b6
Fixes Arduino IDE builds for 8-bit AVR, misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
694 lines
22 KiB
C
694 lines
22 KiB
C
/**********************************************************************
|
|
* $Id$ lpc17xx_ssp.c 2010-06-18
|
|
*//**
|
|
* @file lpc17xx_ssp.c
|
|
* @brief Contains all functions support for SSP firmware library on LPC17xx
|
|
* @version 3.0
|
|
* @date 18. June. 2010
|
|
* @author NXP MCU SW Application Team
|
|
*
|
|
* Copyright(C) 2010, NXP Semiconductor
|
|
* All rights reserved.
|
|
*
|
|
***********************************************************************
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* products. This software is supplied "AS IS" without any warranties.
|
|
* NXP Semiconductors assumes no responsibility or liability for the
|
|
* use of the software, conveys no license or title under any patent,
|
|
* copyright, or mask work right to the product. NXP Semiconductors
|
|
* reserves the right to make changes in the software without
|
|
* notification. NXP Semiconductors also make no representation or
|
|
* warranty that such application will be suitable for the specified
|
|
* use without further testing or modification.
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors'
|
|
* relevant copyright in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
**********************************************************************/
|
|
|
|
/* Peripheral group ----------------------------------------------------------- */
|
|
/** @addtogroup SSP
|
|
* @{
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------- */
|
|
#include "lpc17xx_ssp.h"
|
|
#include "lpc17xx_clkpwr.h"
|
|
|
|
|
|
/* If this source file built with example, the LPC17xx FW library configuration
|
|
* file in each example directory ("lpc17xx_libcfg.h") must be included,
|
|
* otherwise the default FW library configuration file must be included instead
|
|
*/
|
|
#ifdef __BUILD_WITH_EXAMPLE__
|
|
#include "lpc17xx_libcfg.h"
|
|
#else
|
|
#include "lpc17xx_libcfg_default.h"
|
|
#endif /* __BUILD_WITH_EXAMPLE__ */
|
|
|
|
|
|
#ifdef _SSP
|
|
|
|
/* Public Functions ----------------------------------------------------------- */
|
|
/** @addtogroup SSP_Public_Functions
|
|
* @{
|
|
*/
|
|
static void setSSPclock (LPC_SSP_TypeDef *SSPx, uint32_t target_clock);
|
|
|
|
/*********************************************************************//**
|
|
* @brief Setup clock rate for SSP device
|
|
* @param[in] SSPx SSP peripheral definition, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] target_clock : clock of SSP (Hz)
|
|
* @return None
|
|
***********************************************************************/
|
|
static void setSSPclock (LPC_SSP_TypeDef *SSPx, uint32_t target_clock)
|
|
{
|
|
uint32_t prescale, cr0_div, cmp_clk, ssp_clk;
|
|
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
/* The SSP clock is derived from the (main system oscillator / 2),
|
|
so compute the best divider from that clock */
|
|
if (SSPx == LPC_SSP0){
|
|
ssp_clk = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_SSP0);
|
|
} else if (SSPx == LPC_SSP1) {
|
|
ssp_clk = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_SSP1);
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
/* Find closest divider to get at or under the target frequency.
|
|
Use smallest prescale possible and rely on the divider to get
|
|
the closest target frequency */
|
|
cr0_div = 0;
|
|
cmp_clk = 0xFFFFFFFF;
|
|
prescale = 2;
|
|
while (cmp_clk > target_clock)
|
|
{
|
|
cmp_clk = ssp_clk / ((cr0_div + 1) * prescale);
|
|
if (cmp_clk > target_clock)
|
|
{
|
|
cr0_div++;
|
|
if (cr0_div > 0xFF)
|
|
{
|
|
cr0_div = 0;
|
|
prescale += 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Write computed prescaler and divider back to register */
|
|
SSPx->CR0 &= (~SSP_CR0_SCR(0xFF)) & SSP_CR0_BITMASK;
|
|
SSPx->CR0 |= (SSP_CR0_SCR(cr0_div)) & SSP_CR0_BITMASK;
|
|
SSPx->CPSR = prescale & SSP_CPSR_BITMASK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Public Functions ----------------------------------------------------------- */
|
|
/** @addtogroup SSP_Public_Functions
|
|
* @{
|
|
*/
|
|
|
|
/********************************************************************//**
|
|
* @brief Initializes the SSPx peripheral according to the specified
|
|
* parameters in the SSP_ConfigStruct.
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] SSP_ConfigStruct Pointer to a SSP_CFG_Type structure
|
|
* that contains the configuration information for the
|
|
* specified SSP peripheral.
|
|
* @return None
|
|
*********************************************************************/
|
|
void SSP_Init(LPC_SSP_TypeDef *SSPx, SSP_CFG_Type *SSP_ConfigStruct)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
if(SSPx == LPC_SSP0) {
|
|
/* Set up clock and power for SSP0 module */
|
|
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCSSP0, ENABLE);
|
|
} else if(SSPx == LPC_SSP1) {
|
|
/* Set up clock and power for SSP1 module */
|
|
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCSSP1, ENABLE);
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
/* Configure SSP, interrupt is disable, LoopBack mode is disable,
|
|
* SSP is disable, Slave output is disable as default
|
|
*/
|
|
tmp = ((SSP_ConfigStruct->CPHA) | (SSP_ConfigStruct->CPOL) \
|
|
| (SSP_ConfigStruct->FrameFormat) | (SSP_ConfigStruct->Databit))
|
|
& SSP_CR0_BITMASK;
|
|
// write back to SSP control register
|
|
SSPx->CR0 = tmp;
|
|
|
|
tmp = SSP_ConfigStruct->Mode & SSP_CR1_BITMASK;
|
|
// Write back to CR1
|
|
SSPx->CR1 = tmp;
|
|
|
|
// Set clock rate for SSP peripheral
|
|
setSSPclock(SSPx, SSP_ConfigStruct->ClockRate);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief De-initializes the SSPx peripheral registers to their
|
|
* default reset values.
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @return None
|
|
**********************************************************************/
|
|
void SSP_DeInit(LPC_SSP_TypeDef* SSPx)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
if (SSPx == LPC_SSP0){
|
|
/* Set up clock and power for SSP0 module */
|
|
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCSSP0, DISABLE);
|
|
} else if (SSPx == LPC_SSP1) {
|
|
/* Set up clock and power for SSP1 module */
|
|
CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCSSP1, DISABLE);
|
|
}
|
|
}
|
|
|
|
/*****************************************************************************//**
|
|
* @brief Get data size bit selected
|
|
* @param[in] SSPx pointer to LPC_SSP_TypeDef structure, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @return Data size, could be:
|
|
* - SSP_DATABIT_4: 4 bit transfer
|
|
* - SSP_DATABIT_5: 5 bit transfer
|
|
* ...
|
|
* - SSP_DATABIT_16: 16 bit transfer
|
|
*******************************************************************************/
|
|
uint8_t SSP_GetDataSize(LPC_SSP_TypeDef* SSPx)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
return (SSPx->CR0 & (0xF));
|
|
}
|
|
|
|
/*****************************************************************************//**
|
|
* @brief Fills each SSP_InitStruct member with its default value:
|
|
* - CPHA = SSP_CPHA_FIRST
|
|
* - CPOL = SSP_CPOL_HI
|
|
* - ClockRate = 1000000
|
|
* - Databit = SSP_DATABIT_8
|
|
* - Mode = SSP_MASTER_MODE
|
|
* - FrameFormat = SSP_FRAME_SSP
|
|
* @param[in] SSP_InitStruct Pointer to a SSP_CFG_Type structure
|
|
* which will be initialized.
|
|
* @return None
|
|
*******************************************************************************/
|
|
void SSP_ConfigStructInit(SSP_CFG_Type *SSP_InitStruct)
|
|
{
|
|
SSP_InitStruct->CPHA = SSP_CPHA_FIRST;
|
|
SSP_InitStruct->CPOL = SSP_CPOL_HI;
|
|
SSP_InitStruct->ClockRate = 1000000;
|
|
SSP_InitStruct->Databit = SSP_DATABIT_8;
|
|
SSP_InitStruct->Mode = SSP_MASTER_MODE;
|
|
SSP_InitStruct->FrameFormat = SSP_FRAME_SPI;
|
|
}
|
|
|
|
|
|
/*********************************************************************//**
|
|
* @brief Enable or disable SSP peripheral's operation
|
|
* @param[in] SSPx SSP peripheral, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] NewState New State of SSPx peripheral's operation
|
|
* @return none
|
|
**********************************************************************/
|
|
void SSP_Cmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
|
|
|
if (NewState == ENABLE)
|
|
{
|
|
SSPx->CR1 |= SSP_CR1_SSP_EN;
|
|
}
|
|
else
|
|
{
|
|
SSPx->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Enable or disable Loop Back mode function in SSP peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] NewState New State of Loop Back mode, should be:
|
|
* - ENABLE: Enable this function
|
|
* - DISABLE: Disable this function
|
|
* @return None
|
|
**********************************************************************/
|
|
void SSP_LoopBackCmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
|
|
|
if (NewState == ENABLE)
|
|
{
|
|
SSPx->CR1 |= SSP_CR1_LBM_EN;
|
|
}
|
|
else
|
|
{
|
|
SSPx->CR1 &= (~SSP_CR1_LBM_EN) & SSP_CR1_BITMASK;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Enable or disable Slave Output function in SSP peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] NewState New State of Slave Output function, should be:
|
|
* - ENABLE: Slave Output in normal operation
|
|
* - DISABLE: Slave Output is disabled. This blocks
|
|
* SSP controller from driving the transmit data
|
|
* line (MISO)
|
|
* Note: This function is available when SSP peripheral in Slave mode
|
|
* @return None
|
|
**********************************************************************/
|
|
void SSP_SlaveOutputCmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
|
|
|
if (NewState == ENABLE)
|
|
{
|
|
SSPx->CR1 &= (~SSP_CR1_SO_DISABLE) & SSP_CR1_BITMASK;
|
|
}
|
|
else
|
|
{
|
|
SSPx->CR1 |= SSP_CR1_SO_DISABLE;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*********************************************************************//**
|
|
* @brief Transmit a single data through SSPx peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] Data Data to transmit (must be 16 or 8-bit long,
|
|
* this depend on SSP data bit number configured)
|
|
* @return none
|
|
**********************************************************************/
|
|
void SSP_SendData(LPC_SSP_TypeDef* SSPx, uint16_t Data)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
SSPx->DR = SSP_DR_BITMASK(Data);
|
|
}
|
|
|
|
|
|
|
|
/*********************************************************************//**
|
|
* @brief Receive a single data from SSPx peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @return Data received (16-bit long)
|
|
**********************************************************************/
|
|
uint16_t SSP_ReceiveData(LPC_SSP_TypeDef* SSPx)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
return ((uint16_t) (SSP_DR_BITMASK(SSPx->DR)));
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief SSP Read write data function
|
|
* @param[in] SSPx Pointer to SSP peripheral, should be
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] dataCfg Pointer to a SSP_DATA_SETUP_Type structure that
|
|
* contains specified information about transmit
|
|
* data configuration.
|
|
* @param[in] xfType Transfer type, should be:
|
|
* - SSP_TRANSFER_POLLING: Polling mode
|
|
* - SSP_TRANSFER_INTERRUPT: Interrupt mode
|
|
* @return Actual Data length has been transferred in polling mode.
|
|
* In interrupt mode, always return (0)
|
|
* Return (-1) if error.
|
|
* Note: This function can be used in both master and slave mode.
|
|
***********************************************************************/
|
|
int32_t SSP_ReadWrite (LPC_SSP_TypeDef *SSPx, SSP_DATA_SETUP_Type *dataCfg, \
|
|
SSP_TRANSFER_Type xfType)
|
|
{
|
|
uint8_t *rdata8;
|
|
uint8_t *wdata8;
|
|
uint16_t *rdata16;
|
|
uint16_t *wdata16;
|
|
uint32_t stat;
|
|
uint32_t tmp;
|
|
int32_t dataword;
|
|
|
|
dataCfg->rx_cnt = 0;
|
|
dataCfg->tx_cnt = 0;
|
|
dataCfg->status = 0;
|
|
|
|
|
|
/* Clear all remaining data in RX FIFO */
|
|
while (SSPx->SR & SSP_SR_RNE){
|
|
tmp = (uint32_t) SSP_ReceiveData(SSPx);
|
|
}
|
|
|
|
// Clear status
|
|
SSPx->ICR = SSP_ICR_BITMASK;
|
|
if(SSP_GetDataSize(SSPx)>SSP_DATABIT_8)
|
|
dataword = 1;
|
|
else dataword = 0;
|
|
|
|
// Polling mode ----------------------------------------------------------------------
|
|
if (xfType == SSP_TRANSFER_POLLING){
|
|
if (dataword == 0){
|
|
rdata8 = (uint8_t *)dataCfg->rx_data;
|
|
wdata8 = (uint8_t *)dataCfg->tx_data;
|
|
} else {
|
|
rdata16 = (uint16_t *)dataCfg->rx_data;
|
|
wdata16 = (uint16_t *)dataCfg->tx_data;
|
|
}
|
|
while ((dataCfg->tx_cnt < dataCfg->length) || (dataCfg->rx_cnt < dataCfg->length)){
|
|
if ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt < dataCfg->length)){
|
|
// Write data to buffer
|
|
if(dataCfg->tx_data == NULL){
|
|
if (dataword == 0){
|
|
SSP_SendData(SSPx, 0xFF);
|
|
dataCfg->tx_cnt++;
|
|
} else {
|
|
SSP_SendData(SSPx, 0xFFFF);
|
|
dataCfg->tx_cnt += 2;
|
|
}
|
|
} else {
|
|
if (dataword == 0){
|
|
SSP_SendData(SSPx, *wdata8);
|
|
wdata8++;
|
|
dataCfg->tx_cnt++;
|
|
} else {
|
|
SSP_SendData(SSPx, *wdata16);
|
|
wdata16++;
|
|
dataCfg->tx_cnt += 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Check overrun error
|
|
if ((stat = SSPx->RIS) & SSP_RIS_ROR){
|
|
// save status and return
|
|
dataCfg->status = stat | SSP_STAT_ERROR;
|
|
return (-1);
|
|
}
|
|
|
|
// Check for any data available in RX FIFO
|
|
while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt < dataCfg->length)){
|
|
// Read data from SSP data
|
|
tmp = SSP_ReceiveData(SSPx);
|
|
|
|
// Store data to destination
|
|
if (dataCfg->rx_data != NULL)
|
|
{
|
|
if (dataword == 0){
|
|
*(rdata8) = (uint8_t) tmp;
|
|
rdata8++;
|
|
} else {
|
|
*(rdata16) = (uint16_t) tmp;
|
|
rdata16++;
|
|
}
|
|
}
|
|
// Increase counter
|
|
if (dataword == 0){
|
|
dataCfg->rx_cnt++;
|
|
} else {
|
|
dataCfg->rx_cnt += 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
// save status
|
|
dataCfg->status = SSP_STAT_DONE;
|
|
|
|
if (dataCfg->tx_data != NULL){
|
|
return dataCfg->tx_cnt;
|
|
} else if (dataCfg->rx_data != NULL){
|
|
return dataCfg->rx_cnt;
|
|
} else {
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
// Interrupt mode ----------------------------------------------------------------------
|
|
else if (xfType == SSP_TRANSFER_INTERRUPT){
|
|
|
|
while ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt < dataCfg->length)){
|
|
// Write data to buffer
|
|
if(dataCfg->tx_data == NULL){
|
|
if (dataword == 0){
|
|
SSP_SendData(SSPx, 0xFF);
|
|
dataCfg->tx_cnt++;
|
|
} else {
|
|
SSP_SendData(SSPx, 0xFFFF);
|
|
dataCfg->tx_cnt += 2;
|
|
}
|
|
} else {
|
|
if (dataword == 0){
|
|
SSP_SendData(SSPx, (*(uint8_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
|
|
dataCfg->tx_cnt++;
|
|
} else {
|
|
SSP_SendData(SSPx, (*(uint16_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
|
|
dataCfg->tx_cnt += 2;
|
|
}
|
|
}
|
|
|
|
// Check error
|
|
if ((stat = SSPx->RIS) & SSP_RIS_ROR){
|
|
// save status and return
|
|
dataCfg->status = stat | SSP_STAT_ERROR;
|
|
return (-1);
|
|
}
|
|
|
|
// Check for any data available in RX FIFO
|
|
while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt < dataCfg->length)){
|
|
// Read data from SSP data
|
|
tmp = SSP_ReceiveData(SSPx);
|
|
|
|
// Store data to destination
|
|
if (dataCfg->rx_data != NULL)
|
|
{
|
|
if (dataword == 0){
|
|
*(uint8_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint8_t) tmp;
|
|
} else {
|
|
*(uint16_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint16_t) tmp;
|
|
}
|
|
}
|
|
// Increase counter
|
|
if (dataword == 0){
|
|
dataCfg->rx_cnt++;
|
|
} else {
|
|
dataCfg->rx_cnt += 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
// If there more data to sent or receive
|
|
if ((dataCfg->rx_cnt < dataCfg->length) || (dataCfg->tx_cnt < dataCfg->length)){
|
|
// Enable all interrupt
|
|
SSPx->IMSC = SSP_IMSC_BITMASK;
|
|
} else {
|
|
// Save status
|
|
dataCfg->status = SSP_STAT_DONE;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
return (-1);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Checks whether the specified SSP status flag is set or not
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] FlagType Type of flag to check status, should be one
|
|
* of following:
|
|
* - SSP_STAT_TXFIFO_EMPTY: TX FIFO is empty
|
|
* - SSP_STAT_TXFIFO_NOTFULL: TX FIFO is not full
|
|
* - SSP_STAT_RXFIFO_NOTEMPTY: RX FIFO is not empty
|
|
* - SSP_STAT_RXFIFO_FULL: RX FIFO is full
|
|
* - SSP_STAT_BUSY: SSP peripheral is busy
|
|
* @return New State of specified SSP status flag
|
|
**********************************************************************/
|
|
FlagStatus SSP_GetStatus(LPC_SSP_TypeDef* SSPx, uint32_t FlagType)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_SSP_STAT(FlagType));
|
|
|
|
return ((SSPx->SR & FlagType) ? SET : RESET);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Enable or disable specified interrupt type in SSP peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] IntType Interrupt type in SSP peripheral, should be:
|
|
* - SSP_INTCFG_ROR: Receive Overrun interrupt
|
|
* - SSP_INTCFG_RT: Receive Time out interrupt
|
|
* - SSP_INTCFG_RX: RX FIFO is at least half full interrupt
|
|
* - SSP_INTCFG_TX: TX FIFO is at least half empty interrupt
|
|
* @param[in] NewState New State of specified interrupt type, should be:
|
|
* - ENABLE: Enable this interrupt type
|
|
* - DISABLE: Disable this interrupt type
|
|
* @return None
|
|
* Note: We can enable/disable multi-interrupt type by OR multi value
|
|
**********************************************************************/
|
|
void SSP_IntConfig(LPC_SSP_TypeDef *SSPx, uint32_t IntType, FunctionalState NewState)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
|
|
if (NewState == ENABLE)
|
|
{
|
|
SSPx->IMSC |= IntType;
|
|
}
|
|
else
|
|
{
|
|
SSPx->IMSC &= (~IntType) & SSP_IMSC_BITMASK;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Check whether the specified Raw interrupt status flag is
|
|
* set or not
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] RawIntType Raw Interrupt Type, should be:
|
|
* - SSP_INTSTAT_RAW_ROR: Receive Overrun interrupt
|
|
* - SSP_INTSTAT_RAW_RT: Receive Time out interrupt
|
|
* - SSP_INTSTAT_RAW_RX: RX FIFO is at least half full interrupt
|
|
* - SSP_INTSTAT_RAW_TX: TX FIFO is at least half empty interrupt
|
|
* @return New State of specified Raw interrupt status flag in SSP peripheral
|
|
* Note: Enabling/Disabling specified interrupt in SSP peripheral does not
|
|
* effect to Raw Interrupt Status flag.
|
|
**********************************************************************/
|
|
IntStatus SSP_GetRawIntStatus(LPC_SSP_TypeDef *SSPx, uint32_t RawIntType)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_SSP_INTSTAT_RAW(RawIntType));
|
|
|
|
return ((SSPx->RIS & RawIntType) ? SET : RESET);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Get Raw Interrupt Status register
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @return Raw Interrupt Status (RIS) register value
|
|
**********************************************************************/
|
|
uint32_t SSP_GetRawIntStatusReg(LPC_SSP_TypeDef *SSPx)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
return (SSPx->RIS);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Check whether the specified interrupt status flag is
|
|
* set or not
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] IntType Raw Interrupt Type, should be:
|
|
* - SSP_INTSTAT_ROR: Receive Overrun interrupt
|
|
* - SSP_INTSTAT_RT: Receive Time out interrupt
|
|
* - SSP_INTSTAT_RX: RX FIFO is at least half full interrupt
|
|
* - SSP_INTSTAT_TX: TX FIFO is at least half empty interrupt
|
|
* @return New State of specified interrupt status flag in SSP peripheral
|
|
* Note: Enabling/Disabling specified interrupt in SSP peripheral effects
|
|
* to Interrupt Status flag.
|
|
**********************************************************************/
|
|
IntStatus SSP_GetIntStatus (LPC_SSP_TypeDef *SSPx, uint32_t IntType)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_SSP_INTSTAT(IntType));
|
|
|
|
return ((SSPx->MIS & IntType) ? SET :RESET);
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Clear specified interrupt pending in SSP peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] IntType Interrupt pending to clear, should be:
|
|
* - SSP_INTCLR_ROR: clears the "frame was received when
|
|
* RxFIFO was full" interrupt.
|
|
* - SSP_INTCLR_RT: clears the "Rx FIFO was not empty and
|
|
* has not been read for a timeout period" interrupt.
|
|
* @return None
|
|
**********************************************************************/
|
|
void SSP_ClearIntPending(LPC_SSP_TypeDef *SSPx, uint32_t IntType)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_SSP_INTCLR(IntType));
|
|
|
|
SSPx->ICR = IntType;
|
|
}
|
|
|
|
/*********************************************************************//**
|
|
* @brief Enable/Disable DMA function for SSP peripheral
|
|
* @param[in] SSPx SSP peripheral selected, should be:
|
|
* - LPC_SSP0: SSP0 peripheral
|
|
* - LPC_SSP1: SSP1 peripheral
|
|
* @param[in] DMAMode Type of DMA, should be:
|
|
* - SSP_DMA_TX: DMA for the transmit FIFO
|
|
* - SSP_DMA_RX: DMA for the Receive FIFO
|
|
* @param[in] NewState New State of DMA function on SSP peripheral,
|
|
* should be:
|
|
* - ENALBE: Enable this function
|
|
* - DISABLE: Disable this function
|
|
* @return None
|
|
**********************************************************************/
|
|
void SSP_DMACmd(LPC_SSP_TypeDef *SSPx, uint32_t DMAMode, FunctionalState NewState)
|
|
{
|
|
CHECK_PARAM(PARAM_SSPx(SSPx));
|
|
CHECK_PARAM(PARAM_SSP_DMA(DMAMode));
|
|
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
|
|
|
if (NewState == ENABLE)
|
|
{
|
|
SSPx->DMACR |= DMAMode;
|
|
}
|
|
else
|
|
{
|
|
SSPx->DMACR &= (~DMAMode) & SSP_DMA_BITMASK;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* _SSP */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* --------------------------------- End Of File ------------------------------ */
|
|
|