764 lines
21 KiB
C++
764 lines
21 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* stepper/trinamic.cpp
|
|
* Stepper driver indirection for Trinamic
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
|
|
#include "trinamic.h"
|
|
#include "../stepper.h"
|
|
|
|
#include <HardwareSerial.h>
|
|
#include <SPI.h>
|
|
|
|
enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E };
|
|
#define TMC_INIT(ST, STEALTH_INDEX) tmc_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, stealthchop_by_axis[STEALTH_INDEX])
|
|
|
|
// IC = TMC model number
|
|
// ST = Stepper object letter
|
|
// L = Label characters
|
|
// AI = Axis Enum Index
|
|
// SWHW = SW/SH UART selection
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
#define __TMC_SPI_DEFINE(IC, ST, L, AI) TMCMarlin<IC##Stepper, L, AI> stepper##ST(ST##_CS_PIN, float(ST##_RSENSE), TMC_SW_MOSI, TMC_SW_MISO, TMC_SW_SCK, ST##_CHAIN_POS)
|
|
#else
|
|
#define __TMC_SPI_DEFINE(IC, ST, L, AI) TMCMarlin<IC##Stepper, L, AI> stepper##ST(ST##_CS_PIN, float(ST##_RSENSE), ST##_CHAIN_POS)
|
|
#endif
|
|
|
|
#define TMC_UART_HW_DEFINE(IC, ST, L, AI) TMCMarlin<IC##Stepper, L, AI> stepper##ST(&ST##_HARDWARE_SERIAL, float(ST##_RSENSE), ST##_SLAVE_ADDRESS)
|
|
#define TMC_UART_SW_DEFINE(IC, ST, L, AI) TMCMarlin<IC##Stepper, L, AI> stepper##ST(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN, float(ST##_RSENSE), ST##_SLAVE_ADDRESS, ST##_SERIAL_RX_PIN > -1)
|
|
|
|
#define _TMC_SPI_DEFINE(IC, ST, AI) __TMC_SPI_DEFINE(IC, ST, TMC_##ST##_LABEL, AI)
|
|
#define TMC_SPI_DEFINE(ST, AI) _TMC_SPI_DEFINE(ST##_DRIVER_TYPE, ST, AI##_AXIS)
|
|
|
|
#define _TMC_UART_DEFINE(SWHW, IC, ST, AI) TMC_UART_##SWHW##_DEFINE(IC, ST, TMC_##ST##_LABEL, AI)
|
|
#define TMC_UART_DEFINE(SWHW, ST, AI) _TMC_UART_DEFINE(SWHW, ST##_DRIVER_TYPE, ST, AI##_AXIS)
|
|
|
|
#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
|
|
#define TMC_SPI_DEFINE_E(AI) TMC_SPI_DEFINE(E##AI, E##AI)
|
|
#define TMC_UART_DEFINE_E(SWHW, AI) TMC_UART_DEFINE(SWHW, E##AI, E##AI)
|
|
#else
|
|
#define TMC_SPI_DEFINE_E(AI) TMC_SPI_DEFINE(E##AI, E)
|
|
#define TMC_UART_DEFINE_E(SWHW, AI) TMC_UART_DEFINE(SWHW, E##AI, E)
|
|
#endif
|
|
|
|
// Stepper objects of TMC2130/TMC2160/TMC2660/TMC5130/TMC5160 steppers used
|
|
#if AXIS_HAS_SPI(X)
|
|
TMC_SPI_DEFINE(X, X);
|
|
#endif
|
|
#if AXIS_HAS_SPI(X2)
|
|
TMC_SPI_DEFINE(X2, X);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Y)
|
|
TMC_SPI_DEFINE(Y, Y);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Y2)
|
|
TMC_SPI_DEFINE(Y2, Y);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Z)
|
|
TMC_SPI_DEFINE(Z, Z);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Z2)
|
|
TMC_SPI_DEFINE(Z2, Z);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Z3)
|
|
TMC_SPI_DEFINE(Z3, Z);
|
|
#endif
|
|
#if AXIS_HAS_SPI(Z4)
|
|
TMC_SPI_DEFINE(Z4, Z);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E0)
|
|
TMC_SPI_DEFINE_E(0);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E1)
|
|
TMC_SPI_DEFINE_E(1);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E2)
|
|
TMC_SPI_DEFINE_E(2);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E3)
|
|
TMC_SPI_DEFINE_E(3);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E4)
|
|
TMC_SPI_DEFINE_E(4);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E5)
|
|
TMC_SPI_DEFINE_E(5);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E6)
|
|
TMC_SPI_DEFINE_E(6);
|
|
#endif
|
|
#if AXIS_HAS_SPI(E7)
|
|
TMC_SPI_DEFINE_E(7);
|
|
#endif
|
|
|
|
#ifndef TMC_BAUD_RATE
|
|
// Reduce baud rate for boards not already overriding TMC_BAUD_RATE for software serial.
|
|
// Testing has shown that 115200 is not 100% reliable on AVR platforms, occasionally
|
|
// failing to read status properly. 32-bit platforms typically define an even lower
|
|
// TMC_BAUD_RATE, due to differences in how SoftwareSerial libraries work on different
|
|
// platforms.
|
|
#define TMC_BAUD_RATE TERN(HAS_TMC_SW_SERIAL, 57600, 115200)
|
|
#endif
|
|
|
|
#if HAS_DRIVER(TMC2130)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC2130Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
st.begin();
|
|
|
|
CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 1;
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
st.en_pwm_mode(stealth);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_freq = 0b01; // f_pwm = 2/683 f_clk
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_grad = 5;
|
|
pwmconf.pwm_ampl = 180;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
TERN(HYBRID_THRESHOLD, st.set_pwm_thrs(hyb_thrs), UNUSED(hyb_thrs));
|
|
|
|
st.GSTAT(); // Clear GSTAT
|
|
}
|
|
#endif // TMC2130
|
|
|
|
#if HAS_DRIVER(TMC2160)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC2160Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
st.begin();
|
|
|
|
CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 1;
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
st.en_pwm_mode(stealth);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
TMC2160_n::PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_lim = 12;
|
|
pwmconf.pwm_reg = 8;
|
|
pwmconf.pwm_autograd = true;
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_freq = 0b01;
|
|
pwmconf.pwm_grad = 14;
|
|
pwmconf.pwm_ofs = 36;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
TERN(HYBRID_THRESHOLD, st.set_pwm_thrs(hyb_thrs), UNUSED(hyb_thrs));
|
|
|
|
st.GSTAT(); // Clear GSTAT
|
|
}
|
|
#endif // TMC2160
|
|
|
|
//
|
|
// TMC2208/2209 Driver objects and inits
|
|
//
|
|
#if HAS_TMC220x
|
|
#if AXIS_HAS_UART(X)
|
|
#ifdef X_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, X, X);
|
|
#else
|
|
TMC_UART_DEFINE(SW, X, X);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(X2)
|
|
#ifdef X2_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, X2, X);
|
|
#else
|
|
TMC_UART_DEFINE(SW, X2, X);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Y)
|
|
#ifdef Y_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Y, Y);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Y, Y);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Y2)
|
|
#ifdef Y2_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Y2, Y);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Y2, Y);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z)
|
|
#ifdef Z_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Z, Z);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Z, Z);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z2)
|
|
#ifdef Z2_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Z2, Z);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Z2, Z);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z3)
|
|
#ifdef Z3_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Z3, Z);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Z3, Z);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z4)
|
|
#ifdef Z4_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE(HW, Z4, Z);
|
|
#else
|
|
TMC_UART_DEFINE(SW, Z4, Z);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E0)
|
|
#ifdef E0_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 0);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 0);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E1)
|
|
#ifdef E1_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 1);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 1);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E2)
|
|
#ifdef E2_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 2);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 2);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E3)
|
|
#ifdef E3_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 3);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 3);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E4)
|
|
#ifdef E4_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 4);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 4);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E5)
|
|
#ifdef E5_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 5);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 5);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E6)
|
|
#ifdef E6_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 6);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 6);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E7)
|
|
#ifdef E7_HARDWARE_SERIAL
|
|
TMC_UART_DEFINE_E(HW, 7);
|
|
#else
|
|
TMC_UART_DEFINE_E(SW, 7);
|
|
#endif
|
|
#endif
|
|
|
|
enum TMCAxis : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7, TOTAL };
|
|
|
|
void tmc_serial_begin() {
|
|
struct {
|
|
const void *ptr[TMCAxis::TOTAL];
|
|
bool began(const TMCAxis a, const void * const p) {
|
|
LOOP_L_N(i, a) if (p == ptr[i]) return true;
|
|
ptr[a] = p; return false;
|
|
};
|
|
} sp_helper;
|
|
#define HW_SERIAL_BEGIN(A) do{ if (!sp_helper.began(TMCAxis::A, &A##_HARDWARE_SERIAL)) \
|
|
A##_HARDWARE_SERIAL.begin(TMC_BAUD_RATE); }while(0)
|
|
#if AXIS_HAS_UART(X)
|
|
#ifdef X_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(X);
|
|
#else
|
|
stepperX.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(X2)
|
|
#ifdef X2_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(X2);
|
|
#else
|
|
stepperX2.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Y)
|
|
#ifdef Y_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Y);
|
|
#else
|
|
stepperY.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Y2)
|
|
#ifdef Y2_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Y2);
|
|
#else
|
|
stepperY2.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z)
|
|
#ifdef Z_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Z);
|
|
#else
|
|
stepperZ.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z2)
|
|
#ifdef Z2_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Z2);
|
|
#else
|
|
stepperZ2.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z3)
|
|
#ifdef Z3_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Z3);
|
|
#else
|
|
stepperZ3.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(Z4)
|
|
#ifdef Z4_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(Z4);
|
|
#else
|
|
stepperZ4.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E0)
|
|
#ifdef E0_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E0);
|
|
#else
|
|
stepperE0.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E1)
|
|
#ifdef E1_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E1);
|
|
#else
|
|
stepperE1.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E2)
|
|
#ifdef E2_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E2);
|
|
#else
|
|
stepperE2.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E3)
|
|
#ifdef E3_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E3);
|
|
#else
|
|
stepperE3.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E4)
|
|
#ifdef E4_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E4);
|
|
#else
|
|
stepperE4.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E5)
|
|
#ifdef E5_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E5);
|
|
#else
|
|
stepperE5.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E6)
|
|
#ifdef E6_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E6);
|
|
#else
|
|
stepperE6.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
#if AXIS_HAS_UART(E7)
|
|
#ifdef E7_HARDWARE_SERIAL
|
|
HW_SERIAL_BEGIN(E7);
|
|
#else
|
|
stepperE7.beginSerial(TMC_BAUD_RATE);
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if HAS_DRIVER(TMC2208)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
TMC2208_n::GCONF_t gconf{0};
|
|
gconf.pdn_disable = true; // Use UART
|
|
gconf.mstep_reg_select = true; // Select microsteps with UART
|
|
gconf.i_scale_analog = false;
|
|
gconf.en_spreadcycle = !stealth;
|
|
st.GCONF(gconf.sr);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
TMC2208_n::CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 0b01; // blank_time = 24
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
TMC2208_n::PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_lim = 12;
|
|
pwmconf.pwm_reg = 8;
|
|
pwmconf.pwm_autograd = true;
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_freq = 0b01;
|
|
pwmconf.pwm_grad = 14;
|
|
pwmconf.pwm_ofs = 36;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
TERN(HYBRID_THRESHOLD, st.set_pwm_thrs(hyb_thrs), UNUSED(hyb_thrs));
|
|
|
|
st.GSTAT(0b111); // Clear
|
|
delay(200);
|
|
}
|
|
#endif // TMC2208
|
|
|
|
#if HAS_DRIVER(TMC2209)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC2209Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
TMC2208_n::GCONF_t gconf{0};
|
|
gconf.pdn_disable = true; // Use UART
|
|
gconf.mstep_reg_select = true; // Select microsteps with UART
|
|
gconf.i_scale_analog = false;
|
|
gconf.en_spreadcycle = !stealth;
|
|
st.GCONF(gconf.sr);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
TMC2208_n::CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 0b01; // blank_time = 24
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
TMC2208_n::PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_lim = 12;
|
|
pwmconf.pwm_reg = 8;
|
|
pwmconf.pwm_autograd = true;
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_freq = 0b01;
|
|
pwmconf.pwm_grad = 14;
|
|
pwmconf.pwm_ofs = 36;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
TERN(HYBRID_THRESHOLD, st.set_pwm_thrs(hyb_thrs), UNUSED(hyb_thrs));
|
|
|
|
st.GSTAT(0b111); // Clear
|
|
delay(200);
|
|
}
|
|
#endif // TMC2209
|
|
|
|
#if HAS_DRIVER(TMC2660)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC2660Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t, const bool) {
|
|
st.begin();
|
|
|
|
TMC2660_n::CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 1;
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.sdoff(0);
|
|
st.rms_current(mA);
|
|
st.microsteps(microsteps);
|
|
TERN_(SQUARE_WAVE_STEPPING, st.dedge(true));
|
|
st.intpol(INTERPOLATE);
|
|
st.diss2g(true); // Disable short to ground protection. Too many false readings?
|
|
TERN_(TMC_DEBUG, st.rdsel(0b01));
|
|
}
|
|
#endif // TMC2660
|
|
|
|
#if HAS_DRIVER(TMC5130)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC5130Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
st.begin();
|
|
|
|
CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 1;
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
st.en_pwm_mode(stealth);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_freq = 0b01; // f_pwm = 2/683 f_clk
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_grad = 5;
|
|
pwmconf.pwm_ampl = 180;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
TERN(HYBRID_THRESHOLD, st.set_pwm_thrs(hyb_thrs), UNUSED(hyb_thrs));
|
|
|
|
st.GSTAT(); // Clear GSTAT
|
|
}
|
|
#endif // TMC5130
|
|
|
|
#if HAS_DRIVER(TMC5160)
|
|
template<char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
|
|
void tmc_init(TMCMarlin<TMC5160Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> &st, const uint16_t mA, const uint16_t microsteps, const uint32_t hyb_thrs, const bool stealth) {
|
|
st.begin();
|
|
|
|
CHOPCONF_t chopconf{0};
|
|
chopconf.tbl = 1;
|
|
chopconf.toff = chopper_timing.toff;
|
|
chopconf.intpol = INTERPOLATE;
|
|
chopconf.hend = chopper_timing.hend + 3;
|
|
chopconf.hstrt = chopper_timing.hstrt - 1;
|
|
TERN_(SQUARE_WAVE_STEPPING, chopconf.dedge = true);
|
|
st.CHOPCONF(chopconf.sr);
|
|
|
|
st.rms_current(mA, HOLD_MULTIPLIER);
|
|
st.microsteps(microsteps);
|
|
st.iholddelay(10);
|
|
st.TPOWERDOWN(128); // ~2s until driver lowers to hold current
|
|
|
|
st.en_pwm_mode(stealth);
|
|
st.stored.stealthChop_enabled = stealth;
|
|
|
|
TMC2160_n::PWMCONF_t pwmconf{0};
|
|
pwmconf.pwm_lim = 12;
|
|
pwmconf.pwm_reg = 8;
|
|
pwmconf.pwm_autograd = true;
|
|
pwmconf.pwm_autoscale = true;
|
|
pwmconf.pwm_freq = 0b01;
|
|
pwmconf.pwm_grad = 14;
|
|
pwmconf.pwm_ofs = 36;
|
|
st.PWMCONF(pwmconf.sr);
|
|
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
st.set_pwm_thrs(hyb_thrs);
|
|
#else
|
|
UNUSED(hyb_thrs);
|
|
#endif
|
|
st.GSTAT(); // Clear GSTAT
|
|
}
|
|
#endif // TMC5160
|
|
|
|
void restore_trinamic_drivers() {
|
|
#if AXIS_IS_TMC(X)
|
|
stepperX.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(X2)
|
|
stepperX2.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Y)
|
|
stepperY.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Y2)
|
|
stepperY2.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z)
|
|
stepperZ.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z2)
|
|
stepperZ2.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z3)
|
|
stepperZ3.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(Z4)
|
|
stepperZ4.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E0)
|
|
stepperE0.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E1)
|
|
stepperE1.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E2)
|
|
stepperE2.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E3)
|
|
stepperE3.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E4)
|
|
stepperE4.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E5)
|
|
stepperE5.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E6)
|
|
stepperE6.push();
|
|
#endif
|
|
#if AXIS_IS_TMC(E7)
|
|
stepperE7.push();
|
|
#endif
|
|
}
|
|
|
|
void reset_trinamic_drivers() {
|
|
static constexpr bool stealthchop_by_axis[] = { ENABLED(STEALTHCHOP_XY), ENABLED(STEALTHCHOP_Z), ENABLED(STEALTHCHOP_E) };
|
|
|
|
#if AXIS_IS_TMC(X)
|
|
TMC_INIT(X, STEALTH_AXIS_XY);
|
|
#endif
|
|
#if AXIS_IS_TMC(X2)
|
|
TMC_INIT(X2, STEALTH_AXIS_XY);
|
|
#endif
|
|
#if AXIS_IS_TMC(Y)
|
|
TMC_INIT(Y, STEALTH_AXIS_XY);
|
|
#endif
|
|
#if AXIS_IS_TMC(Y2)
|
|
TMC_INIT(Y2, STEALTH_AXIS_XY);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z)
|
|
TMC_INIT(Z, STEALTH_AXIS_Z);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z2)
|
|
TMC_INIT(Z2, STEALTH_AXIS_Z);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z3)
|
|
TMC_INIT(Z3, STEALTH_AXIS_Z);
|
|
#endif
|
|
#if AXIS_IS_TMC(Z4)
|
|
TMC_INIT(Z4, STEALTH_AXIS_Z);
|
|
#endif
|
|
#if AXIS_IS_TMC(E0)
|
|
TMC_INIT(E0, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E1)
|
|
TMC_INIT(E1, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E2)
|
|
TMC_INIT(E2, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E3)
|
|
TMC_INIT(E3, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E4)
|
|
TMC_INIT(E4, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E5)
|
|
TMC_INIT(E5, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E6)
|
|
TMC_INIT(E6, STEALTH_AXIS_E);
|
|
#endif
|
|
#if AXIS_IS_TMC(E7)
|
|
TMC_INIT(E7, STEALTH_AXIS_E);
|
|
#endif
|
|
|
|
#if USE_SENSORLESS
|
|
#if X_SENSORLESS
|
|
stepperX.homing_threshold(X_STALL_SENSITIVITY);
|
|
#if AXIS_HAS_STALLGUARD(X2)
|
|
stepperX2.homing_threshold(CAT(TERN(X2_SENSORLESS, X2, X), _STALL_SENSITIVITY));
|
|
#endif
|
|
#endif
|
|
#if Y_SENSORLESS
|
|
stepperY.homing_threshold(Y_STALL_SENSITIVITY);
|
|
#if AXIS_HAS_STALLGUARD(Y2)
|
|
stepperY2.homing_threshold(CAT(TERN(Y2_SENSORLESS, Y2, Y), _STALL_SENSITIVITY));
|
|
#endif
|
|
#endif
|
|
#if Z_SENSORLESS
|
|
stepperZ.homing_threshold(Z_STALL_SENSITIVITY);
|
|
#if AXIS_HAS_STALLGUARD(Z2)
|
|
stepperZ2.homing_threshold(CAT(TERN(Z2_SENSORLESS, Z2, Z), _STALL_SENSITIVITY));
|
|
#endif
|
|
#if AXIS_HAS_STALLGUARD(Z3)
|
|
stepperZ3.homing_threshold(CAT(TERN(Z3_SENSORLESS, Z3, Z), _STALL_SENSITIVITY));
|
|
#endif
|
|
#if AXIS_HAS_STALLGUARD(Z4)
|
|
stepperZ4.homing_threshold(CAT(TERN(Z4_SENSORLESS, Z4, Z), _STALL_SENSITIVITY));
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef TMC_ADV
|
|
TMC_ADV()
|
|
#endif
|
|
|
|
stepper.set_directions();
|
|
}
|
|
|
|
#endif // HAS_TRINAMIC_CONFIG
|