152 lines
6 KiB
C
152 lines
6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/****************************************************************************************
|
|
* Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments
|
|
* Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE!
|
|
* http://www.pjrc.com/teensy/teensyduino.html
|
|
****************************************************************************************/
|
|
|
|
#if !IS_32BIT_TEENSY
|
|
#error "Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#if IS_TEENSY35
|
|
#define BOARD_NAME "Teensy3.5"
|
|
#elif IS_TEENSY36
|
|
#define BOARD_NAME "Teensy3.6"
|
|
#endif
|
|
|
|
#define AT90USB 1286 // Disable MarlinSerial etc.
|
|
#define USBCON //1286 // Disable MarlinSerial etc.
|
|
/*
|
|
|
|
teemuatlut plan for Teensy3.5 and Teensy3.6:
|
|
USB
|
|
GND |-----#####-----| VIN 5V
|
|
X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND
|
|
X_DIR_PIN MISO1 TX1 1 | | 3.3V
|
|
Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM
|
|
Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM
|
|
Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1
|
|
Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN
|
|
X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN
|
|
Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN
|
|
Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN
|
|
CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN
|
|
CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN
|
|
X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN
|
|
Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN
|
|
3.3V | | GND
|
|
Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1
|
|
AUX2 25 | 41 * * 52 | A21 DAC0
|
|
AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS
|
|
AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1
|
|
AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1
|
|
D10 CONTROLLERFAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM
|
|
D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN
|
|
D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN
|
|
SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN
|
|
|
|
Interior pins:
|
|
LCD_PINS_RS 40 * * 53 SCK2
|
|
LCD_PINS_ENABLE 41 * * 52 MOSI2
|
|
LCD_PINS_D4 42 * * 51 MISO2
|
|
LCD_PINS_D5 CS2 43 * * 50 A24
|
|
LCD_PINS_D6 MOSI2 44 * * 49 A23
|
|
LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC
|
|
BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2
|
|
GND * * 3.3V
|
|
|
|
*/
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN 24
|
|
#define Y_STOP_PIN 26
|
|
#define Z_STOP_PIN 28
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 22
|
|
#define X_DIR_PIN 21
|
|
#define X_ENABLE_PIN 39
|
|
|
|
#define Y_STEP_PIN 19
|
|
#define Y_DIR_PIN 18
|
|
#define Y_ENABLE_PIN 20
|
|
|
|
#define Z_STEP_PIN 38
|
|
#define Z_DIR_PIN 37
|
|
#define Z_ENABLE_PIN 17
|
|
|
|
#define E0_STEP_PIN 31
|
|
#define E0_DIR_PIN 30
|
|
#define E0_ENABLE_PIN 32
|
|
|
|
#define E1_STEP_PIN 33
|
|
#define E1_DIR_PIN 34
|
|
#define E1_ENABLE_PIN 35
|
|
|
|
#define HEATER_0_PIN 30
|
|
#define HEATER_1_PIN 36
|
|
#define HEATER_BED_PIN 31
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 2
|
|
#endif
|
|
|
|
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
|
|
#define TEMP_1_PIN 0
|
|
#define TEMP_BED_PIN 1 // Bed / Analog pin numbering
|
|
|
|
#define SDSS 39 // 8
|
|
#define LED_PIN 13
|
|
#define PS_ON_PIN 1
|
|
#define ALARM_PIN -1
|
|
|
|
#define FILWIDTH_PIN 6
|
|
#define SOL1_PIN 28
|
|
|
|
#if 0
|
|
// Pretty sure this is obsolete!
|
|
// Please use Marlin 1.1.x pins files as reference for new pins files.
|
|
#ifndef SDSUPPORT
|
|
// these are defined in the SD library if building with SD support
|
|
#define SCK_PIN 13
|
|
#define MISO_PIN 12
|
|
#define MOSI_PIN 11
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(ULTRA_LCD)
|
|
#define LCD_PINS_RS 40
|
|
#define LCD_PINS_ENABLE 41
|
|
#define LCD_PINS_D4 42
|
|
#define LCD_PINS_D5 43
|
|
#define LCD_PINS_D6 44
|
|
#define LCD_PINS_D7 45
|
|
#define BTN_EN1 46
|
|
#define BTN_EN2 47
|
|
#define BTN_ENC 48
|
|
#endif
|