This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/M100_Free_Mem_Chk.cpp
2016-03-24 18:01:20 +00:00

274 lines
8.8 KiB
C++

/*
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#define M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command
#define M100_FREE_MEMORY_CORRUPTOR // Comment out to remove Corrupt sub-command
// M100 Free Memory Watcher
//
// This code watches the free memory block between the bottom of the heap and the top of the stack.
// This memory block is initialized and watched via the M100 command.
//
// M100 I Initializes the free memory block and prints vitals statistics about the area
// M100 F Identifies how much of the free memory block remains free and unused. It also
// detects and reports any corruption within the free memory block that may have
// happened due to errant firmware.
// M100 D Does a hex display of the free memory block along with a flag for any errant
// data that does not match the expected value.
// M100 C x Corrupts x locations within the free memory block. This is useful to check the
// correctness of the M100 F and M100 D commands.
//
// Initial version by Roxy-3DPrintBoard
//
//
#include "Marlin.h"
#if ENABLED(M100_FREE_MEMORY_WATCHER)
extern void* __brkval;
extern size_t __heap_start, __heap_end, __flp;
//
// Declare all the functions we need from Marlin_Main.cpp to do the work!
//
float code_value();
long code_value_long();
bool code_seen(char);
void serial_echopair_P(const char*, float);
void serial_echopair_P(const char*, double);
void serial_echopair_P(const char*, unsigned long);
void serial_echopair_P(const char*, int);
void serial_echopair_P(const char*, long);
//
// Utility functions used by M100 to get its work done.
//
unsigned char* top_of_stack();
void prt_hex_nibble(unsigned int);
void prt_hex_byte(unsigned int);
void prt_hex_word(unsigned int);
int how_many_E5s_are_here(unsigned char*);
void gcode_M100() {
static int m100_not_initialized = 1;
unsigned char* sp, *ptr;
int i, j, n;
//
// M100 D dumps the free memory block from __brkval to the stack pointer.
// malloc() eats memory from the start of the block and the stack grows
// up from the bottom of the block. Solid 0xE5's indicate nothing has
// used that memory yet. There should not be anything but 0xE5's within
// the block of 0xE5's. If there is, that would indicate memory corruption
// probably caused by bad pointers. Any unexpected values will be flagged in
// the right hand column to help spotting them.
//
#if ENABLED(M100_FREE_MEMORY_DUMPER) // Disable to remove Dump sub-command
if (code_seen('D')) {
ptr = (unsigned char*) __brkval;
//
// We want to start and end the dump on a nice 16 byte boundry even though
// the values we are using are not 16 byte aligned.
//
SERIAL_ECHOPGM("\n__brkval : ");
prt_hex_word((unsigned int) ptr);
ptr = (unsigned char*)((unsigned long) ptr & 0xfff0);
sp = top_of_stack();
SERIAL_ECHOPGM("\nStack Pointer : ");
prt_hex_word((unsigned int) sp);
SERIAL_ECHOPGM("\n");
sp = (unsigned char*)((unsigned long) sp | 0x000f);
n = sp - ptr;
//
// This is the main loop of the Dump command.
//
while (ptr < sp) {
prt_hex_word((unsigned int) ptr); // Print the address
SERIAL_ECHOPGM(":");
for (i = 0; i < 16; i++) { // and 16 data bytes
prt_hex_byte(*(ptr + i));
SERIAL_ECHOPGM(" ");
delay(2);
}
SERIAL_ECHO("|"); // now show where non 0xE5's are
for (i = 0; i < 16; i++) {
delay(2);
if (*(ptr + i) == 0xe5)
SERIAL_ECHOPGM(" ");
else
SERIAL_ECHOPGM("?");
}
SERIAL_ECHO("\n");
ptr += 16;
delay(2);
}
SERIAL_ECHOLNPGM("Done.\n");
return;
}
#endif
//
// M100 F requests the code to return the number of free bytes in the memory pool along with
// other vital statistics that define the memory pool.
//
if (code_seen('F')) {
int max_addr = (int) __brkval;
int max_cnt = 0;
int block_cnt = 0;
ptr = (unsigned char*) __brkval;
sp = top_of_stack();
n = sp - ptr;
// Scan through the range looking for the biggest block of 0xE5's we can find
for (i = 0; i < n; i++) {
if (*(ptr + i) == (unsigned char) 0xe5) {
j = how_many_E5s_are_here((unsigned char*) ptr + i);
if (j > 8) {
SERIAL_ECHOPAIR("Found ", j);
SERIAL_ECHOPGM(" bytes free at 0x");
prt_hex_word((int) ptr + i);
SERIAL_ECHOPGM("\n");
i += j;
block_cnt++;
}
if (j > max_cnt) { // We don't do anything with this information yet
max_cnt = j; // but we do know where the biggest free memory block is.
max_addr = (int) ptr + i;
}
}
}
if (block_cnt > 1)
SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.\n");
SERIAL_ECHO("\nDone.\n");
return;
}
//
// M100 C x Corrupts x locations in the free memory pool and reports the locations of the corruption.
// This is useful to check the correctness of the M100 D and the M100 F commands.
//
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
if (code_seen('C')) {
int x; // x gets the # of locations to corrupt within the memory pool
x = code_value();
SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
ptr = (unsigned char*) __brkval;
SERIAL_ECHOPAIR("\n__brkval : ", (long) ptr);
ptr += 8;
sp = top_of_stack();
SERIAL_ECHOPAIR("\nStack Pointer : ", (long) sp);
SERIAL_ECHOLNPGM("\n");
n = sp - ptr - 64; // -64 just to keep us from finding interrupt activity that
// has altered the stack.
j = n / (x + 1);
for (i = 1; i <= x; i++) {
*(ptr + (i * j)) = i;
SERIAL_ECHO("\nCorrupting address: 0x");
prt_hex_word((unsigned int)(ptr + (i * j)));
}
SERIAL_ECHOLNPGM("\n");
return;
}
#endif
//
// M100 I Initializes the free memory pool so it can be watched and prints vital
// statistics that define the free memory pool.
//
if (m100_not_initialized || code_seen('I')) { // If no sub-command is specified, the first time
SERIAL_ECHOLNPGM("Initializing free memory block.\n"); // this happens, it will Initialize.
ptr = (unsigned char*) __brkval; // Repeated M100 with no sub-command will not destroy the
SERIAL_ECHOPAIR("\n__brkval : ", (long) ptr); // state of the initialized free memory pool.
ptr += 8;
sp = top_of_stack();
SERIAL_ECHOPAIR("\nStack Pointer : ", (long) sp);
SERIAL_ECHOLNPGM("\n");
n = sp - ptr - 64; // -64 just to keep us from finding interrupt activity that
// has altered the stack.
SERIAL_ECHO(n);
SERIAL_ECHOLNPGM(" bytes of memory initialized.\n");
for (i = 0; i < n; i++)
*(ptr + i) = (unsigned char) 0xe5;
for (i = 0; i < n; i++) {
if (*(ptr + i) != (unsigned char) 0xe5) {
SERIAL_ECHOPAIR("? address : ", (unsigned long) ptr + i);
SERIAL_ECHOPAIR("=", *(ptr + i));
SERIAL_ECHOLNPGM("\n");
}
}
m100_not_initialized = 0;
SERIAL_ECHOLNPGM("Done.\n");
return;
}
return;
}
// top_of_stack() returns the location of a variable on its stack frame. The value returned is above
// the stack once the function returns to the caller.
unsigned char* top_of_stack() {
unsigned char x;
return &x + 1; // x is pulled on return;
}
//
// 3 support routines to print hex numbers. We can print a nibble, byte and word
//
void prt_hex_nibble(unsigned int n) {
if (n <= 9)
SERIAL_ECHO(n);
else
SERIAL_ECHO((char)('A' + n - 10));
delay(2);
}
void prt_hex_byte(unsigned int b) {
prt_hex_nibble((b & 0xf0) >> 4);
prt_hex_nibble(b & 0x0f);
}
void prt_hex_word(unsigned int w) {
prt_hex_byte((w & 0xff00) >> 8);
prt_hex_byte(w & 0x0ff);
}
// how_many_E5s_are_here() is a utility function to easily find out how many 0xE5's are
// at the specified location. Having this logic as a function simplifies the search code.
//
int how_many_E5s_are_here(unsigned char* p) {
int n;
for (n = 0; n < 32000; n++) {
if (*(p + n) != (unsigned char) 0xe5)
return n - 1;
}
return -1;
}
#endif