361 lines
9.4 KiB
C++
361 lines
9.4 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
#include "../gcode.h"
|
|
|
|
#include "../../module/stepper.h"
|
|
#include "../../module/endstops.h"
|
|
|
|
#if HOTENDS > 1
|
|
#include "../../module/tool_change.h"
|
|
#endif
|
|
|
|
#if HAS_LEVELING
|
|
#include "../../feature/bedlevel/bedlevel.h"
|
|
#endif
|
|
|
|
#if ENABLED(SENSORLESS_HOMING)
|
|
#include "../../feature/tmc_util.h"
|
|
#endif
|
|
|
|
#if HOMING_Z_WITH_PROBE
|
|
#include "../../module/probe.h"
|
|
#endif
|
|
|
|
#include "../../lcd/ultralcd.h"
|
|
|
|
#if ENABLED(QUICK_HOME)
|
|
|
|
static void quick_home_xy() {
|
|
|
|
// Pretend the current position is 0,0
|
|
current_position[X_AXIS] = current_position[Y_AXIS] = 0.0;
|
|
sync_plan_position();
|
|
|
|
const int x_axis_home_dir =
|
|
#if ENABLED(DUAL_X_CARRIAGE)
|
|
x_home_dir(active_extruder)
|
|
#else
|
|
home_dir(X_AXIS)
|
|
#endif
|
|
;
|
|
|
|
const float mlx = max_length(X_AXIS),
|
|
mly = max_length(Y_AXIS),
|
|
mlratio = mlx > mly ? mly / mlx : mlx / mly,
|
|
fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0);
|
|
|
|
#if ENABLED(SENSORLESS_HOMING)
|
|
sensorless_homing_per_axis(X_AXIS);
|
|
sensorless_homing_per_axis(Y_AXIS);
|
|
#endif
|
|
|
|
do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s);
|
|
endstops.hit_on_purpose(); // clear endstop hit flags
|
|
current_position[X_AXIS] = current_position[Y_AXIS] = 0.0;
|
|
|
|
#if ENABLED(SENSORLESS_HOMING)
|
|
sensorless_homing_per_axis(X_AXIS, false);
|
|
sensorless_homing_per_axis(Y_AXIS, false);
|
|
safe_delay(500); // Short delay needed to settle
|
|
#endif
|
|
}
|
|
|
|
#endif // QUICK_HOME
|
|
|
|
#if ENABLED(Z_SAFE_HOMING)
|
|
|
|
inline void home_z_safely() {
|
|
|
|
// Disallow Z homing if X or Y are unknown
|
|
if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) {
|
|
LCD_MESSAGEPGM(MSG_ERR_Z_HOMING);
|
|
SERIAL_ECHO_START();
|
|
SERIAL_ECHOLNPGM(MSG_ERR_Z_HOMING);
|
|
return;
|
|
}
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Z_SAFE_HOMING >>>");
|
|
#endif
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
/**
|
|
* Move the Z probe (or just the nozzle) to the safe homing point
|
|
*/
|
|
destination[X_AXIS] = Z_SAFE_HOMING_X_POINT;
|
|
destination[Y_AXIS] = Z_SAFE_HOMING_Y_POINT;
|
|
destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height
|
|
|
|
#if HOMING_Z_WITH_PROBE
|
|
destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER;
|
|
destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER;
|
|
#endif
|
|
|
|
if (position_is_reachable(destination[X_AXIS], destination[Y_AXIS])) {
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("Z_SAFE_HOMING", destination);
|
|
#endif
|
|
|
|
// This causes the carriage on Dual X to unpark
|
|
#if ENABLED(DUAL_X_CARRIAGE)
|
|
active_extruder_parked = false;
|
|
#endif
|
|
|
|
#if ENABLED(SENSORLESS_HOMING)
|
|
safe_delay(500); // Short delay needed to settle
|
|
#endif
|
|
|
|
do_blocking_move_to_xy(destination[X_AXIS], destination[Y_AXIS]);
|
|
HOMEAXIS(Z);
|
|
}
|
|
else {
|
|
LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
|
|
SERIAL_ECHO_START();
|
|
SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT);
|
|
}
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
|
|
#endif
|
|
}
|
|
|
|
#endif // Z_SAFE_HOMING
|
|
|
|
/**
|
|
* G28: Home all axes according to settings
|
|
*
|
|
* Parameters
|
|
*
|
|
* None Home to all axes with no parameters.
|
|
* With QUICK_HOME enabled XY will home together, then Z.
|
|
*
|
|
* Cartesian parameters
|
|
*
|
|
* X Home to the X endstop
|
|
* Y Home to the Y endstop
|
|
* Z Home to the Z endstop
|
|
*
|
|
*/
|
|
void GcodeSuite::G28(const bool always_home_all) {
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) {
|
|
SERIAL_ECHOLNPGM(">>> G28");
|
|
log_machine_info();
|
|
}
|
|
#endif
|
|
|
|
// Wait for planner moves to finish!
|
|
stepper.synchronize();
|
|
|
|
// Cancel the active G29 session
|
|
#if ENABLED(PROBE_MANUALLY)
|
|
g29_in_progress = false;
|
|
#endif
|
|
|
|
// Disable the leveling matrix before homing
|
|
#if HAS_LEVELING
|
|
#if ENABLED(RESTORE_LEVELING_AFTER_G28)
|
|
const bool leveling_state_at_entry = planner.leveling_active;
|
|
#endif
|
|
set_bed_leveling_enabled(false);
|
|
#endif
|
|
|
|
#if ENABLED(CNC_WORKSPACE_PLANES)
|
|
workspace_plane = PLANE_XY;
|
|
#endif
|
|
|
|
// Always home with tool 0 active
|
|
#if HOTENDS > 1
|
|
#if DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE)
|
|
const uint8_t old_tool_index = active_extruder;
|
|
#endif
|
|
tool_change(0, 0, true);
|
|
#endif
|
|
|
|
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
|
|
extruder_duplication_enabled = false;
|
|
#endif
|
|
|
|
setup_for_endstop_or_probe_move();
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> endstops.enable(true)");
|
|
#endif
|
|
endstops.enable(true); // Enable endstops for next homing move
|
|
|
|
#if ENABLED(DELTA)
|
|
|
|
home_delta();
|
|
UNUSED(always_home_all);
|
|
|
|
#else // NOT DELTA
|
|
|
|
const bool homeX = always_home_all || parser.seen('X'),
|
|
homeY = always_home_all || parser.seen('Y'),
|
|
homeZ = always_home_all || parser.seen('Z'),
|
|
home_all = (!homeX && !homeY && !homeZ) || (homeX && homeY && homeZ);
|
|
|
|
set_destination_from_current();
|
|
|
|
#if Z_HOME_DIR > 0 // If homing away from BED do Z first
|
|
|
|
if (home_all || homeZ) HOMEAXIS(Z);
|
|
|
|
#endif
|
|
|
|
#if ENABLED(UNKNOWN_Z_NO_RAISE)
|
|
const float z_homing_height = axis_known_position[Z_AXIS] ? Z_HOMING_HEIGHT : 0;
|
|
#else
|
|
constexpr float z_homing_height = Z_HOMING_HEIGHT;
|
|
#endif
|
|
|
|
if (z_homing_height && (home_all || homeX || homeY)) {
|
|
// Raise Z before homing any other axes and z is not already high enough (never lower z)
|
|
destination[Z_AXIS] = z_homing_height;
|
|
if (destination[Z_AXIS] > current_position[Z_AXIS]) {
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING))
|
|
SERIAL_ECHOLNPAIR("Raise Z (before homing) to ", destination[Z_AXIS]);
|
|
#endif
|
|
|
|
do_blocking_move_to_z(destination[Z_AXIS]);
|
|
}
|
|
}
|
|
|
|
#if ENABLED(QUICK_HOME)
|
|
|
|
if (home_all || (homeX && homeY)) quick_home_xy();
|
|
|
|
#endif
|
|
|
|
// Home Y (before X)
|
|
#if ENABLED(HOME_Y_BEFORE_X)
|
|
|
|
if (home_all || homeY
|
|
#if ENABLED(CODEPENDENT_XY_HOMING)
|
|
|| homeX
|
|
#endif
|
|
) HOMEAXIS(Y);
|
|
|
|
#endif
|
|
|
|
// Home X
|
|
if (home_all || homeX
|
|
#if ENABLED(CODEPENDENT_XY_HOMING) && DISABLED(HOME_Y_BEFORE_X)
|
|
|| homeY
|
|
#endif
|
|
) {
|
|
|
|
#if ENABLED(DUAL_X_CARRIAGE)
|
|
|
|
// Always home the 2nd (right) extruder first
|
|
active_extruder = 1;
|
|
HOMEAXIS(X);
|
|
|
|
// Remember this extruder's position for later tool change
|
|
inactive_extruder_x_pos = current_position[X_AXIS];
|
|
|
|
// Home the 1st (left) extruder
|
|
active_extruder = 0;
|
|
HOMEAXIS(X);
|
|
|
|
// Consider the active extruder to be parked
|
|
COPY(raised_parked_position, current_position);
|
|
delayed_move_time = 0;
|
|
active_extruder_parked = true;
|
|
|
|
#else
|
|
|
|
HOMEAXIS(X);
|
|
|
|
#endif
|
|
}
|
|
|
|
// Home Y (after X)
|
|
#if DISABLED(HOME_Y_BEFORE_X)
|
|
if (home_all || homeY) HOMEAXIS(Y);
|
|
#endif
|
|
|
|
// Home Z last if homing towards the bed
|
|
#if Z_HOME_DIR < 0
|
|
if (home_all || homeZ) {
|
|
#if ENABLED(Z_SAFE_HOMING)
|
|
home_z_safely();
|
|
#else
|
|
HOMEAXIS(Z);
|
|
#endif
|
|
} // home_all || homeZ
|
|
#if HOMING_Z_WITH_PROBE
|
|
move_z_after_probing();
|
|
#endif
|
|
#endif // Z_HOME_DIR < 0
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
#endif // !DELTA (G28)
|
|
|
|
endstops.not_homing();
|
|
|
|
#if ENABLED(DELTA) && ENABLED(DELTA_HOME_TO_SAFE_ZONE)
|
|
// move to a height where we can use the full xy-area
|
|
do_blocking_move_to_z(delta_clip_start_height);
|
|
#endif
|
|
|
|
#if ENABLED(RESTORE_LEVELING_AFTER_G28)
|
|
set_bed_leveling_enabled(leveling_state_at_entry);
|
|
#endif
|
|
|
|
clean_up_after_endstop_or_probe_move();
|
|
|
|
// Restore the active tool after homing
|
|
#if HOTENDS > 1 && (DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE))
|
|
#if ENABLED(PARKING_EXTRUDER)
|
|
#define NO_FETCH false // fetch the previous toolhead
|
|
#else
|
|
#define NO_FETCH true
|
|
#endif
|
|
tool_change(old_tool_index, 0, NO_FETCH);
|
|
#endif
|
|
|
|
lcd_refresh();
|
|
|
|
report_current_position();
|
|
#if ENABLED(NANODLP_Z_SYNC)
|
|
#if ENABLED(NANODLP_ALL_AXIS)
|
|
#define _HOME_SYNC true // For any axis, output sync text.
|
|
#else
|
|
#define _HOME_SYNC (home_all || homeZ) // Only for Z-axis
|
|
#endif
|
|
if (_HOME_SYNC)
|
|
SERIAL_ECHOLNPGM(MSG_Z_MOVE_COMP);
|
|
#endif
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< G28");
|
|
#endif
|
|
}
|