129 lines
4.6 KiB
C++
129 lines
4.6 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "../gcode.h"
|
|
#include "../../Marlin.h"
|
|
#include "../../module/planner.h"
|
|
|
|
/**
|
|
* M200: Set filament diameter and set E axis units to cubic units
|
|
*
|
|
* T<extruder> - Optional extruder number. Current extruder if omitted.
|
|
* D<linear> - Diameter of the filament. Use "D0" to switch back to linear units on the E axis.
|
|
*/
|
|
void GcodeSuite::M200() {
|
|
|
|
if (get_target_extruder_from_command()) return;
|
|
|
|
if (parser.seen('D')) {
|
|
// setting any extruder filament size disables volumetric on the assumption that
|
|
// slicers either generate in extruder values as cubic mm or as as filament feeds
|
|
// for all extruders
|
|
if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0.0)) )
|
|
planner.set_filament_size(target_extruder, parser.value_linear_units());
|
|
}
|
|
planner.calculate_volumetric_multipliers();
|
|
}
|
|
|
|
/**
|
|
* M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
|
|
*
|
|
* With multiple extruders use T to specify which one.
|
|
*/
|
|
void GcodeSuite::M201() {
|
|
|
|
GET_TARGET_EXTRUDER();
|
|
|
|
LOOP_XYZE(i) {
|
|
if (parser.seen(axis_codes[i])) {
|
|
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
|
|
planner.max_acceleration_mm_per_s2[a] = parser.value_axis_units((AxisEnum)a);
|
|
}
|
|
}
|
|
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
|
|
planner.reset_acceleration_rates();
|
|
}
|
|
|
|
/**
|
|
* M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
|
|
*
|
|
* With multiple extruders use T to specify which one.
|
|
*/
|
|
void GcodeSuite::M203() {
|
|
|
|
GET_TARGET_EXTRUDER();
|
|
|
|
LOOP_XYZE(i)
|
|
if (parser.seen(axis_codes[i])) {
|
|
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
|
|
planner.max_feedrate_mm_s[a] = parser.value_axis_units((AxisEnum)a);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M204: Set Accelerations in units/sec^2 (M204 P1200 R3000 T3000)
|
|
*
|
|
* P = Printing moves
|
|
* R = Retract only (no X, Y, Z) moves
|
|
* T = Travel (non printing) moves
|
|
*
|
|
* Also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
|
|
*/
|
|
void GcodeSuite::M204() {
|
|
if (parser.seen('S')) { // Kept for legacy compatibility. Should NOT BE USED for new developments.
|
|
planner.travel_acceleration = planner.acceleration = parser.value_linear_units();
|
|
SERIAL_ECHOLNPAIR("Setting Print and Travel Acceleration: ", planner.acceleration);
|
|
}
|
|
if (parser.seen('P')) {
|
|
planner.acceleration = parser.value_linear_units();
|
|
SERIAL_ECHOLNPAIR("Setting Print Acceleration: ", planner.acceleration);
|
|
}
|
|
if (parser.seen('R')) {
|
|
planner.retract_acceleration = parser.value_linear_units();
|
|
SERIAL_ECHOLNPAIR("Setting Retract Acceleration: ", planner.retract_acceleration);
|
|
}
|
|
if (parser.seen('T')) {
|
|
planner.travel_acceleration = parser.value_linear_units();
|
|
SERIAL_ECHOLNPAIR("Setting Travel Acceleration: ", planner.travel_acceleration);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M205: Set Advanced Settings
|
|
*
|
|
* S = Min Feed Rate (units/s)
|
|
* T = Min Travel Feed Rate (units/s)
|
|
* B = Min Segment Time (µs)
|
|
* X = Max X Jerk (units/sec^2)
|
|
* Y = Max Y Jerk (units/sec^2)
|
|
* Z = Max Z Jerk (units/sec^2)
|
|
* E = Max E Jerk (units/sec^2)
|
|
*/
|
|
void GcodeSuite::M205() {
|
|
if (parser.seen('S')) planner.min_feedrate_mm_s = parser.value_linear_units();
|
|
if (parser.seen('T')) planner.min_travel_feedrate_mm_s = parser.value_linear_units();
|
|
if (parser.seen('B')) planner.min_segment_time_us = parser.value_ulong();
|
|
if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units();
|
|
if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units();
|
|
if (parser.seen('Z')) planner.max_jerk[Z_AXIS] = parser.value_linear_units();
|
|
if (parser.seen('E')) planner.max_jerk[E_AXIS] = parser.value_linear_units();
|
|
}
|