This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/language_da.h
esenapaj 8d0b2f358a Cleanup for language files
・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2)
・Remove duplicated strings 
・Arrange the strings in unified order
・Adjust spacing
・Remove some comments in Japanese files(follow-up the PR #3560)

The most part of these changes were salvaged from closed my PR#3550.
2016-04-23 13:27:05 +09:00

176 lines
8.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Danish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_DA_H
#define LANGUAGE_DA_H
#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define MSG_MAIN "Menu"
#define WELCOME_MSG MACHINE_NAME " er klar"
#define MSG_SD_INSERTED "Kort isat"
#define MSG_SD_REMOVED "Kort fjernet"
#define MSG_AUTOSTART "Autostart"
#define MSG_AUTO_HOME "Home" // G28
#define MSG_COOLDOWN "Afkøl"
#define MSG_DISABLE_STEPPERS "Slå stepper fra"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Tryk for at starte"
#define MSG_LEVEL_BED_DONE "Justering er færdig!"
#define MSG_LEVEL_BED_CANCEL "Annuller"
#define MSG_SET_HOME_OFFSETS "Sæt forskyding til udgangsposition"
#define MSG_HOME_OFFSETS_APPLIED "Forskydninger er tilføjet"
#define MSG_SET_ORIGIN "Sæt origin"
#define MSG_SWITCH_PS_ON "Slå strøm til"
#define MSG_SWITCH_PS_OFF "Slå strøm fra"
#define MSG_PREHEAT_PLA "Forvarm PLA"
#define MSG_PREHEAT_PLA_N "Forvarm PLA "
#define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf"
#define MSG_PREHEAT_ABS "Forvarm ABS"
#define MSG_PREHEAT_ABS_N "Forvarm ABS "
#define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf"
#define MSG_EXTRUDE "Extruder"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Flyt akser"
#define MSG_MOVE_X "Flyt X"
#define MSG_MOVE_Y "Flyt Y"
#define MSG_MOVE_Z "Flyt Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Flyt 0.1mm"
#define MSG_MOVE_1MM "Flyt 1mm"
#define MSG_MOVE_10MM "Flyt 10mm"
#define MSG_SPEED "Hastighed"
#define MSG_NOZZLE "Dyse"
#define MSG_BED "Plade"
#define MSG_FAN_SPEED "Blæser hastighed"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Kontrol"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Til "
#define MSG_OFF "Fra"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "X"
#define MSG_Y "Y"
#define MSG_Z "Z"
#define MSG_E "E"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-rejse"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrast"
#define MSG_STORE_EPROM "Gem i EEPROM"
#define MSG_LOAD_EPROM "Hent fra EEPROM"
#define MSG_RESTORE_FAILSAFE "Gendan failsafe"
#define MSG_REFRESH "Genopfrisk"
#define MSG_WATCH "Info skærm"
#define MSG_PREPARE "Forbered"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause printet"
#define MSG_RESUME_PRINT "Forsæt printet"
#define MSG_STOP_PRINT "Stop printet"
#define MSG_CARD_MENU "Print fra SD"
#define MSG_NO_CARD "Intet SD kort"
#define MSG_DWELL "Dvale..."
#define MSG_USERWAIT "Venter på bruger..."
#define MSG_RESUMING "Forsætter printet"
#define MSG_PRINT_ABORTED "Print annulleret"
#define MSG_NO_MOVE "Ingen bevægelse."
#define MSG_KILLED "DRÆBT. "
#define MSG_STOPPED "STOPPET. "
#define MSG_CONTROL_RETRACT "Tilbagetraek mm"
#define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm"
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Skift filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Skift SD kort"
#define MSG_ZPROBE_OUT "Probe udenfor plade"
#define MSG_YX_UNHOMED "Home X/Y før Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_END_HOUR "Timer"
#define MSG_END_MINUTE "Minutter"
#define MSG_HEATING "Opvarmer..."
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
#define MSG_BED_DONE "Plade opvarmet"
#define MSG_BED_Z "Plade Z"
#define MSG_HEATING_FAILED_LCD "Opvarmning mislykkedes"
#define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: Maks temp"
#define MSG_ERR_MINTEMP "Fejl: Min temp"
#define MSG_ERR_MAXTEMP_BED "Fejl: Maks P temp"
#define MSG_ERR_MINTEMP_BED "Fejl: Min P temp"
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Kalibrering"
#define MSG_DELTA_CALIBRATE_X "Kalibrer X"
#define MSG_DELTA_CALIBRATE_Y "Kalibrer Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibrer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_DA_H