f3eee02596
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines for all used endstop pins. If this worked without errors, `endstops.update()` is called only if one of the endstops changed its state. The new interrupt routines do not really check the endstops and react upon them. All what they do, is to set a flag if it makes sense to call the endstop test we are used to. This can be used on: * ARM (DUE) based boards - all pins can raise interrupts, * RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts, * RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough, * all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose. |
||
---|---|---|
.. | ||
_Bootscreen.h | ||
Configuration.h | ||
Configuration_adv.h | ||
README.md |
Example Configuration for BQ Hephestos 2
This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at BQ Github repository.
NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.
Changelog
- 2016/03/01 - Initial release
- 2016/03/21 - Activated 4-point auto leveling by default Updated miscellaneous z-probe values
- 2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished
- 2016/07/13 - Update the
DEFAULT_AXIS_STEPS_PER_UNIT
for the Z axis Increased theDEFAULT_XYJERK