Marlin-Artillery-M600/Marlin/pins_BAM_DICE_DUE.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * BAM&DICE Due (Arduino Mega) pin assignments
 */

#if HOTENDS > 2 || E_STEPPERS > 2
  #error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif

#define BOARD_NAME "2PrintBeta Due"

#include "pins_RAMPS.h"

//
// Temperature Sensors
//
#undef TEMP_0_PIN
#undef TEMP_1_PIN
#define TEMP_0_PIN          9   // Analog Input
#define TEMP_1_PIN         11   // Analog Input
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 07:19:46 +01:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Merge branch 'Development' into fixup_ramps_boards - Also apply cleanup for #1514 2015-02-20 02:26:22 +01:00			`/**`
			`* BAM&DICE Due (Arduino Mega) pin assignments`
			`*/`

Patch pins files hotends/e-steppers sanity check 2017-04-07 00:15:09 +02:00			`#if HOTENDS > 2 \|\| E_STEPPERS > 2`
			`#error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue."`
Consolidate setting of RAMPS High Voltage PWM outputs 2016-07-30 01:13:19 +02:00			`#endif`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 11:24:29 +02:00			`#define BOARD_NAME "2PrintBeta Due"`

pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 12:10:30 +02:00			`#include "pins_RAMPS.h"`
Merge branch 'Development' into fixup_ramps_boards - Also apply cleanup for #1514 2015-02-20 02:26:22 +01:00
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`//`
			`// Temperature Sensors`
			`//`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00			`#undef TEMP_0_PIN`
			`#undef TEMP_1_PIN`
Label analog pins in a similar way Some other pins formatting also 2016-10-05 08:52:43 +02:00			`#define TEMP_0_PIN 9 // Analog Input`
			`#define TEMP_1_PIN 11 // Analog Input`