2016-07-26 21:32:16 +02:00
/**
* Marlin 3 D Printer Firmware
* Copyright ( C ) 2016 MarlinFirmware [ https : //github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl .
* Copyright ( C ) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 3 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program . If not , see < http : //www.gnu.org/licenses/>.
*
*/
/**
* SanityCheck . h
2016-07-29 02:08:28 +02:00
*
* Test configuration values for errors at compile - time .
*/
/**
2016-12-20 02:12:58 +01:00
* Require gcc 4.7 or newer ( first included with Arduino 1.6 .8 ) for C + + 11 features .
2016-07-29 02:08:28 +02:00
*/
2016-12-20 02:12:58 +01:00
# if __cplusplus < 201103L
# error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
2016-07-29 02:08:28 +02:00
# endif
/**
2017-04-11 19:58:55 +02:00
* We try our best to include sanity checks for all changed configuration
* directives because users have a tendency to use outdated config files with
* the bleeding - edge source code , but sometimes this is not enough . This check
* forces a minimum config file revision . Otherwise Marlin will not build .
2016-07-29 02:08:28 +02:00
*/
# if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION
# error "You are using an old Configuration.h file, update it before building Marlin."
# endif
# if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION
# error "You are using an old Configuration_adv.h file, update it before building Marlin."
# endif
2016-09-23 00:10:20 +02:00
/**
2016-08-05 06:03:55 +02:00
* Warnings for old configurations
*/
# if WATCH_TEMP_PERIOD > 500
# error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
# elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
# error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
# elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
# error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
2016-11-06 05:47:38 +01:00
# elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
# error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
2016-08-05 06:03:55 +02:00
# elif defined(X_HOME_RETRACT_MM)
# error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
# elif defined(SDCARDDETECTINVERTED)
# error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
# elif defined(BTENABLED)
# error "BTENABLED is now BLUETOOTH. Please update your configuration."
# elif defined(CUSTOM_MENDEL_NAME)
# error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
# elif defined(HAS_AUTOMATIC_VERSIONING)
# error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
# elif defined(SDSLOW)
# error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
# elif defined(SDEXTRASLOW)
# error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
# elif defined(FILAMENT_SENSOR)
# error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
# elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
# error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
# elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
2017-05-02 22:38:39 +02:00
# error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2."
2016-08-05 06:03:55 +02:00
# elif defined(LANGUAGE_INCLUDE)
# error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
# elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
# error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
# elif defined(PID_PARAMS_PER_EXTRUDER)
# error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
# elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
# error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
# elif defined(SERVO_ENDSTOP_ANGLES)
# error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
# elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
# error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
2016-10-02 11:37:13 +02:00
# elif defined(DEFAULT_XYJERK)
# error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
2016-08-05 06:03:55 +02:00
# elif defined(XY_TRAVEL_SPEED)
# error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
# elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
# error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
# elif defined(SERVO_DEACTIVATION_DELAY)
# error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
# elif ENABLED(FILAMENTCHANGEENABLE)
2017-05-26 20:01:02 +02:00
# error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_FEATURE)
# error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_X_POS)
# error "FILAMENT_CHANGE_X_POS is now PAUSE_PARK_X_POS. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_Y_POS)
# error "FILAMENT_CHANGE_Y_POS is now PAUSE_PARK_Y_POS. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_Z_ADD)
# error "FILAMENT_CHANGE_Z_ADD is now PAUSE_PARK_Z_ADD. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_XY_FEEDRATE)
# error "FILAMENT_CHANGE_XY_FEEDRATE is now PAUSE_PARK_XY_FEEDRATE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_Z_FEEDRATE)
# error "FILAMENT_CHANGE_Z_FEEDRATE is now PAUSE_PARK_Z_FEEDRATE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_RETRACT_FEEDRATE)
# error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_RETRACT_LENGTH)
# error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_EXTRUDE_FEEDRATE)
# error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_EXTRUDE_FEEDRATE. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_EXTRUDE_LENGTH)
# error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_EXTRUDE_LENGTH. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_NOZZLE_TIMEOUT)
# error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration."
# elif ENABLED(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT)
# error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration."
2016-08-05 06:03:55 +02:00
# elif defined(PLA_PREHEAT_HOTEND_TEMP)
# error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
# elif defined(PLA_PREHEAT_HPB_TEMP)
# error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
# elif defined(PLA_PREHEAT_FAN_SPEED)
# error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
# elif defined(ABS_PREHEAT_HOTEND_TEMP)
# error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
# elif defined(ABS_PREHEAT_HPB_TEMP)
# error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
# elif defined(ABS_PREHEAT_FAN_SPEED)
# error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
# elif defined(ENDSTOPS_ONLY_FOR_HOMING)
# error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
# elif defined(HOMING_FEEDRATE)
# error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
# elif defined(MANUAL_HOME_POSITIONS)
# error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
# elif defined(PID_ADD_EXTRUSION_RATE)
# error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
# elif defined(Z_RAISE_BEFORE_HOMING)
# error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
# elif defined(MIN_Z_HEIGHT_FOR_HOMING)
# error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
# elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
2016-09-20 10:49:42 +02:00
# error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE instead."
2016-08-05 06:03:55 +02:00
# elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
2016-09-20 10:49:42 +02:00
# error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
2016-09-14 03:25:12 +02:00
# elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
2016-09-20 10:49:42 +02:00
# error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
2017-03-13 06:24:22 +01:00
# elif defined(MANUAL_BED_LEVELING)
# error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration."
2017-03-15 09:20:41 +01:00
# elif defined(MESH_HOME_SEARCH_Z)
2017-03-13 06:24:22 +01:00
# error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration."
# elif defined(MANUAL_PROBE_Z_RANGE)
# error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
2016-08-21 15:56:03 +02:00
# elif !defined(MIN_STEPS_PER_SEGMENT)
2016-08-29 02:40:32 +02:00
# error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
2016-08-21 06:34:24 +02:00
# elif defined(PREVENT_DANGEROUS_EXTRUDE)
# error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
2016-09-12 03:11:39 +02:00
# elif defined(SCARA)
# error "SCARA is now MORGAN_SCARA. Please update your configuration."
2016-09-26 06:17:39 +02:00
# elif defined(ENABLE_AUTO_BED_LEVELING)
# error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
# elif defined(AUTO_BED_LEVELING_FEATURE)
# error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
# elif defined(ABL_GRID_POINTS)
2017-04-06 05:29:44 +02:00
# error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration."
2016-12-10 06:38:28 +01:00
# elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y)
2017-04-06 05:29:44 +02:00
# error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
# elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y)
# error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
# elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS)
# error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
# elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS)
# error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
2017-04-02 03:06:12 +02:00
# elif defined(UBL_MESH_EDIT_ENABLED)
2017-05-21 18:10:22 +02:00
# error "UBL_MESH_EDIT_ENABLED is now UBL_G26_MESH_VALIDATION. Please update your configuration."
# elif defined(UBL_MESH_EDITING)
# error "UBL_MESH_EDITING is now UBL_G26_MESH_VALIDATION. Please update your configuration."
2017-05-22 05:09:51 +02:00
# elif defined(BLTOUCH_HEATERS_OFF)
# error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
2016-09-24 23:36:12 +02:00
# elif defined(BEEPER)
# error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
# elif defined(SDCARDDETECT)
# error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
# elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
# error "STAT_LED_RED / STAT_LED_BLUE are now STAT_LED_RED_PIN / STAT_LED_BLUE_PIN. Please update your pins definitions."
# elif defined(LCD_PIN_BL)
# error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
# elif defined(LCD_PIN_RESET)
# error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
2016-10-23 03:20:59 +02:00
# elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
# error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
2017-03-17 02:03:57 +01:00
# elif defined(min_software_endstops) || defined(max_software_endstops)
# error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
2017-04-14 23:36:02 +02:00
# elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN)
# error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
2017-05-03 03:18:31 +02:00
# elif defined(CONTROLLERFAN_PIN)
# error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
2016-08-05 06:03:55 +02:00
# endif
2016-07-29 02:08:28 +02:00
/**
* Marlin release , version and default string
*/
# ifndef SHORT_BUILD_VERSION
# error "SHORT_BUILD_VERSION must be specified."
# elif !defined(DETAILED_BUILD_VERSION)
# error "BUILD_VERSION must be specified."
# elif !defined(STRING_DISTRIBUTION_DATE)
# error "STRING_DISTRIBUTION_DATE must be specified."
# elif !defined(PROTOCOL_VERSION)
# error "PROTOCOL_VERSION must be specified."
# elif !defined(MACHINE_NAME)
# error "MACHINE_NAME must be specified."
# elif !defined(SOURCE_CODE_URL)
# error "SOURCE_CODE_URL must be specified."
# elif !defined(DEFAULT_MACHINE_UUID)
# error "DEFAULT_MACHINE_UUID must be specified."
# elif !defined(WEBSITE_URL)
# error "WEBSITE_URL must be specified."
# endif
/**
* Dual Stepper Drivers
*/
# if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
# error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
# elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR)
# error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
# elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR)
# error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
# elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR)
# error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
# endif
/**
* Progress Bar
*/
# if ENABLED(LCD_PROGRESS_BAR)
# if DISABLED(SDSUPPORT)
# error "LCD_PROGRESS_BAR requires SDSUPPORT."
2016-09-12 05:42:54 +02:00
# elif ENABLED(DOGLCD)
2016-07-29 02:08:28 +02:00
# error "LCD_PROGRESS_BAR does not apply to graphical displays."
2016-09-12 05:42:54 +02:00
# elif ENABLED(FILAMENT_LCD_DISPLAY)
2016-07-29 02:08:28 +02:00
# error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
# endif
# endif
2017-02-09 14:02:25 +01:00
/**
* SD File Sorting
*/
# if ENABLED(SDCARD_SORT_ALPHA)
# if SDSORT_LIMIT > 256
# error "SDSORT_LIMIT must be 256 or smaller."
# elif SDSORT_LIMIT < 10
# error "SDSORT_LIMIT should be greater than 9 to be useful."
2017-02-09 14:05:34 +01:00
# elif DISABLED(SDSORT_USES_RAM)
# if ENABLED(SDSORT_DYNAMIC_RAM)
# error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)."
# elif ENABLED(SDSORT_CACHE_NAMES)
# error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
# endif
2017-02-09 14:02:25 +01:00
# endif
# endif
2017-06-09 14:06:23 +02:00
/**
* I2C Position Encoders
*/
# if ENABLED(I2C_POSITION_ENCODERS)
# if DISABLED(BABYSTEPPING)
# error "I2C_POSITION_ENCODERS requires BABYSTEPPING."
# endif
# if I2CPE_ENCODER_CNT > 5 || I2CPE_ENCODER_CNT < 1
# error "I2CPE_ENCODER_CNT must be between 1 and 5."
# endif
# endif
2016-07-29 02:08:28 +02:00
/**
* Babystepping
*/
# if ENABLED(BABYSTEPPING)
2017-06-09 14:06:23 +02:00
# if DISABLED(ULTRA_LCD) && DISABLED(I2C_POSITION_ENCODERS)
2016-07-29 02:08:28 +02:00
# error "BABYSTEPPING requires an LCD controller."
2017-04-13 23:29:43 +02:00
# elif ENABLED(SCARA)
2016-07-29 02:08:28 +02:00
# error "BABYSTEPPING is not implemented for SCARA yet."
2017-04-13 23:29:43 +02:00
# elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
2016-07-29 02:08:28 +02:00
# error "BABYSTEPPING only implemented for Z axis on deltabots."
2017-06-17 22:02:25 +02:00
# elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && ENABLED(MESH_BED_LEVELING)
# error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
2017-04-13 23:29:43 +02:00
# elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
# error "BABYSTEP_ZPROBE_OFFSET requires a probe."
2016-07-29 02:08:28 +02:00
# endif
# endif
/**
* Filament Runout needs a pin and either SD Support or Auto print start detection
*/
# if ENABLED(FILAMENT_RUNOUT_SENSOR)
# if !HAS_FIL_RUNOUT
# error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
# elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
# error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
2017-05-26 20:01:02 +02:00
# elif DISABLED(ADVANCED_PAUSE_FEATURE)
static_assert ( NULL = = strstr ( FILAMENT_RUNOUT_SCRIPT , " M600 " ) , " ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR. " ) ;
2016-07-29 02:08:28 +02:00
# endif
# endif
/**
2017-05-26 20:01:02 +02:00
* Advanced Pause
2016-07-29 02:08:28 +02:00
*/
2017-05-26 20:01:02 +02:00
# if ENABLED(ADVANCED_PAUSE_FEATURE)
2017-06-01 04:44:05 +02:00
# if DISABLED(NEWPANEL)
2017-05-26 20:01:02 +02:00
# error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller."
2016-12-24 04:48:18 +01:00
# elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
2017-05-26 20:01:02 +02:00
# error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
2017-06-01 04:44:05 +02:00
# elif ENABLED(PARK_HEAD_ON_PAUSE) && DISABLED(SDSUPPORT) && DISABLED(NEWPANEL) && DISABLED(EMERGENCY_PARSER)
2017-03-18 03:24:33 +01:00
# error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
2017-06-15 04:06:34 +02:00
# elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
# error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT"
2016-12-24 04:48:18 +01:00
# endif
2016-07-29 02:08:28 +02:00
# endif
/**
* Individual axis homing is useless for DELTAS
*/
# if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
# error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
# endif
/**
* Options only for EXTRUDERS > 1
*/
# if EXTRUDERS > 1
2017-04-06 23:45:29 +02:00
# if EXTRUDERS > 5
# error "Marlin supports a maximum of 5 EXTRUDERS."
2016-07-29 02:08:28 +02:00
# endif
# if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
# error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
# endif
# if ENABLED(HEATERS_PARALLEL)
# error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
# endif
# elif ENABLED(SINGLENOZZLE)
# error "SINGLENOZZLE requires 2 or more EXTRUDERS."
# endif
/**
2017-05-12 21:09:40 +02:00
* A dual nozzle x - carriage with switching servo
2016-07-29 02:08:28 +02:00
*/
2017-05-12 21:09:40 +02:00
# if ENABLED(SWITCHING_NOZZLE)
# if ENABLED(SINGLENOZZLE)
# error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
# elif EXTRUDERS < 2
# error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
# elif NUM_SERVOS < 1
# error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
# endif
2016-07-29 02:08:28 +02:00
# endif
/**
* Single Stepper Dual Extruder with switching servo
*/
# if ENABLED(SWITCHING_EXTRUDER)
# if ENABLED(DUAL_X_CARRIAGE)
# error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
# elif EXTRUDERS != 2
# error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS."
# elif NUM_SERVOS < 1
# error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
# endif
# endif
/**
* Mixing Extruder requirements
*/
# if ENABLED(MIXING_EXTRUDER)
# if EXTRUDERS > 1
# error "MIXING_EXTRUDER currently only supports one extruder."
2017-05-12 21:09:40 +02:00
# elif MIXING_STEPPERS < 2
2016-07-29 02:08:28 +02:00
# error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
2017-05-12 21:09:40 +02:00
# elif ENABLED(FILAMENT_SENSOR)
2016-07-29 02:08:28 +02:00
# error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
2017-05-12 21:09:40 +02:00
# elif ENABLED(SWITCHING_EXTRUDER)
# error "Please select either MIXING_EXTRUDER or SWITCHING_EXTRUDER, not both."
# elif ENABLED(SINGLENOZZLE)
# error "MIXING_EXTRUDER is incompatible with SINGLENOZZLE."
2017-05-25 15:06:27 +02:00
# elif ENABLED(LIN_ADVANCE)
# error "MIXING_EXTRUDER is incompatible with LIN_ADVANCE."
2016-07-29 02:08:28 +02:00
# endif
# endif
/**
* Limited number of servos
*/
2016-09-19 04:46:10 +02:00
# if NUM_SERVOS > 4
# error "The maximum number of SERVOS in Marlin is 4."
2016-07-29 02:08:28 +02:00
# endif
/**
2017-05-28 15:33:28 +02:00
* Servo deactivation depends on servo endstops or switching nozzle
2016-07-29 02:08:28 +02:00
*/
2017-05-28 15:33:28 +02:00
# if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP && !defined(SWITCHING_NOZZLE_SERVO_NR)
# error "Z_ENDSTOP_SERVO_NR or switching nozzle is required for DEACTIVATE_SERVOS_AFTER_MOVE."
2016-07-29 02:08:28 +02:00
# endif
/**
* Required LCD language
*/
# if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
# error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
# endif
/**
* Bed Heating Options - PID vs Limit Switching
*/
# if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
# error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
# endif
2016-09-26 06:17:39 +02:00
/**
2017-06-06 14:19:27 +02:00
* Kinematics
*/
/**
* Allow only one kinematic type to be defined
2016-09-26 06:17:39 +02:00
*/
2017-03-16 22:31:34 +01:00
static_assert ( 1 > = 0
2017-06-06 14:19:27 +02:00
# if ENABLED(DELTA)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-26 06:17:39 +02:00
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(MORGAN_SCARA)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-26 06:17:39 +02:00
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(MAKERARM_SCARA)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-26 06:17:39 +02:00
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(COREXY)
2017-03-18 16:02:54 +01:00
+ 1
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(COREXZ)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-26 06:17:39 +02:00
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(COREYZ)
+ 1
2016-07-29 02:08:28 +02:00
# endif
2017-06-06 14:19:27 +02:00
# if ENABLED(COREYX)
+ 1
# endif
# if ENABLED(COREZX)
+ 1
# endif
# if ENABLED(COREZY)
+ 1
# endif
, " Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY. "
) ;
2017-03-18 16:02:54 +01:00
/**
2017-06-06 14:19:27 +02:00
* Delta requirements
2017-03-18 16:02:54 +01:00
*/
2017-06-06 14:19:27 +02:00
# if ENABLED(DELTA)
# if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG)
# error "You probably want to use Max Endstops for DELTA!"
# elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_DELTA
# error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
# elif ABL_GRID
# if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
# error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
# elif GRID_MAX_POINTS_X < 3
# error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
# endif
2017-03-18 16:02:54 +01:00
# endif
2016-07-29 02:08:28 +02:00
# endif
/**
* Probes
*/
2017-03-16 22:31:34 +01:00
/**
* Allow only one probe option to be defined
*/
static_assert ( 1 > = 0
# if ENABLED(PROBE_MANUALLY)
+ 1
# endif
2016-09-19 06:28:11 +02:00
# if ENABLED(FIX_MOUNTED_PROBE)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-19 06:28:11 +02:00
# endif
# if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-19 06:28:11 +02:00
# endif
# if ENABLED(BLTOUCH)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-19 06:28:11 +02:00
# endif
2017-05-19 13:50:01 +02:00
# if ENABLED(SOLENOID_PROBE)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-19 06:28:11 +02:00
# endif
2017-05-19 13:50:01 +02:00
# if ENABLED(Z_PROBE_ALLEN_KEY)
2017-03-16 22:31:34 +01:00
+ 1
2016-09-19 06:28:11 +02:00
# endif
2017-05-19 13:50:01 +02:00
# if ENABLED(Z_PROBE_SLED)
2017-04-14 23:36:02 +02:00
+ 1
# endif
2017-05-19 13:50:01 +02:00
, " Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo. "
2017-03-16 22:31:34 +01:00
) ;
# if PROBE_SELECTED
2016-09-19 06:28:11 +02:00
/**
* Z_PROBE_SLED is incompatible with DELTA
*/
2016-07-29 02:08:28 +02:00
# if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
# error "You cannot use Z_PROBE_SLED with DELTA."
# endif
2017-04-14 23:36:02 +02:00
/**
* SOLENOID_PROBE requirements
*/
# if ENABLED(SOLENOID_PROBE)
# if ENABLED(EXT_SOLENOID)
# error "SOLENOID_PROBE is incompatible with EXT_SOLENOID."
# elif !HAS_SOLENOID_1
# error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h."
# endif
# endif
2016-07-29 02:08:28 +02:00
/**
* NUM_SERVOS is required for a Z servo probe
*/
# if HAS_Z_SERVO_ENDSTOP
# ifndef NUM_SERVOS
# error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)."
# elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
2016-09-19 04:46:10 +02:00
# error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
2016-07-29 02:08:28 +02:00
# endif
# endif
/**
2016-09-19 06:28:11 +02:00
* Require pin options and pins to be defined
2016-07-29 02:08:28 +02:00
*/
2016-09-19 06:28:11 +02:00
# if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
# if ENABLED(Z_MIN_PROBE_ENDSTOP)
# error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
# elif DISABLED(USE_ZMIN_PLUG)
# error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
# elif !HAS_Z_MIN
# error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
2016-12-07 10:37:37 +01:00
# elif ENABLED(Z_MIN_PROBE_ENDSTOP_INVERTING) != ENABLED(Z_MIN_ENDSTOP_INVERTING)
# error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
2016-08-03 05:55:17 +02:00
# endif
2016-09-19 06:28:11 +02:00
# elif ENABLED(Z_MIN_PROBE_ENDSTOP)
2016-07-29 02:08:28 +02:00
# if !HAS_Z_MIN_PROBE_PIN
2016-09-19 06:28:11 +02:00
# error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined."
2016-07-29 02:08:28 +02:00
# endif
2017-03-13 06:24:22 +01:00
# elif DISABLED(PROBE_MANUALLY)
2016-09-19 06:28:11 +02:00
# error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe."
2016-07-29 02:08:28 +02:00
# endif
/**
* Make sure Z raise values are set
*/
2016-09-20 10:49:42 +02:00
# if !defined(Z_CLEARANCE_DEPLOY_PROBE)
# error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
# elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
# error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
# elif Z_CLEARANCE_DEPLOY_PROBE < 0
# error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
# elif Z_CLEARANCE_BETWEEN_PROBES < 0
# error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
2016-07-29 02:08:28 +02:00
# endif
# else
/**
* Require some kind of probe for bed leveling and probe testing
*/
2016-09-26 06:17:39 +02:00
# if HAS_ABL
2017-05-19 13:50:01 +02:00
# if ENABLED(AUTO_BED_LEVELING_UBL)
# error "Unified Bed Leveling requires a probe: FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
# else
# error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
# endif
2016-07-29 02:08:28 +02:00
# elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
2017-05-19 13:50:01 +02:00
# error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe: FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
2016-07-29 02:08:28 +02:00
# endif
# endif
2017-06-06 14:19:27 +02:00
/**
* Allow only one bed leveling option to be defined
*/
static_assert ( 1 > = 0
# if ENABLED(AUTO_BED_LEVELING_LINEAR)
+ 1
# endif
# if ENABLED(AUTO_BED_LEVELING_3POINT)
+ 1
# endif
# if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+ 1
# endif
# if ENABLED(AUTO_BED_LEVELING_UBL)
+ 1
# endif
# if ENABLED(MESH_BED_LEVELING)
+ 1
# endif
, " Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL. "
) ;
/**
* Bed Leveling Requirements
*/
# if ENABLED(AUTO_BED_LEVELING_UBL)
/**
* Unified Bed Leveling
*/
# if IS_SCARA
# error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
# elif DISABLED(EEPROM_SETTINGS)
# error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
# elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
# error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
# else
static_assert ( WITHIN ( UBL_PROBE_PT_1_X , MIN_PROBE_X , MAX_PROBE_X ) , " UBL_PROBE_PT_1_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( UBL_PROBE_PT_2_X , MIN_PROBE_X , MAX_PROBE_X ) , " UBL_PROBE_PT_2_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( UBL_PROBE_PT_3_X , MIN_PROBE_X , MAX_PROBE_X ) , " UBL_PROBE_PT_3_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( UBL_PROBE_PT_1_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " UBL_PROBE_PT_1_Y can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( UBL_PROBE_PT_2_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " UBL_PROBE_PT_2_Y can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( UBL_PROBE_PT_3_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " UBL_PROBE_PT_3_Y can't be reached by the Z probe. " ) ;
# endif
# elif HAS_ABL
/**
* Auto Bed Leveling
*/
# if ENABLED(USE_RAW_KINEMATICS)
# error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING"
# endif
/**
* Delta and SCARA have limited bed leveling options
*/
# if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR)
# error "Only AUTO_BED_LEVELING_BILINEAR currently supports SCARA bed leveling."
# endif
/**
* Check auto bed leveling probe points
*/
# if ABL_GRID
# ifdef DELTA_PROBEABLE_RADIUS
static_assert ( LEFT_PROBE_BED_POSITION > = - DELTA_PROBEABLE_RADIUS , " LEFT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS. " ) ;
static_assert ( RIGHT_PROBE_BED_POSITION < = DELTA_PROBEABLE_RADIUS , " RIGHT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS. " ) ;
static_assert ( FRONT_PROBE_BED_POSITION > = - DELTA_PROBEABLE_RADIUS , " FRONT_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS. " ) ;
static_assert ( BACK_PROBE_BED_POSITION < = DELTA_PROBEABLE_RADIUS , " BACK_PROBE_BED_POSITION must be within DELTA_PROBEABLE_RADIUS. " ) ;
# else
static_assert ( LEFT_PROBE_BED_POSITION < RIGHT_PROBE_BED_POSITION , " LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION. " ) ;
static_assert ( FRONT_PROBE_BED_POSITION < BACK_PROBE_BED_POSITION , " FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION. " ) ;
static_assert ( LEFT_PROBE_BED_POSITION > = MIN_PROBE_X , " LEFT_PROBE_BED_POSITION can't be reached by the Z probe. " ) ;
static_assert ( RIGHT_PROBE_BED_POSITION < = MAX_PROBE_X , " RIGHT_PROBE_BED_POSITION can't be reached by the Z probe. " ) ;
static_assert ( FRONT_PROBE_BED_POSITION > = MIN_PROBE_Y , " FRONT_PROBE_BED_POSITION can't be reached by the Z probe. " ) ;
static_assert ( BACK_PROBE_BED_POSITION < = MAX_PROBE_Y , " BACK_PROBE_BED_POSITION can't be reached by the Z probe. " ) ;
# endif
# else // AUTO_BED_LEVELING_3POINT
static_assert ( WITHIN ( ABL_PROBE_PT_1_X , MIN_PROBE_X , MAX_PROBE_X ) , " ABL_PROBE_PT_1_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( ABL_PROBE_PT_2_X , MIN_PROBE_X , MAX_PROBE_X ) , " ABL_PROBE_PT_2_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( ABL_PROBE_PT_3_X , MIN_PROBE_X , MAX_PROBE_X ) , " ABL_PROBE_PT_3_X can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( ABL_PROBE_PT_1_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " ABL_PROBE_PT_1_Y can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( ABL_PROBE_PT_2_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " ABL_PROBE_PT_2_Y can't be reached by the Z probe. " ) ;
static_assert ( WITHIN ( ABL_PROBE_PT_3_Y , MIN_PROBE_Y , MAX_PROBE_Y ) , " ABL_PROBE_PT_3_Y can't be reached by the Z probe. " ) ;
# endif // AUTO_BED_LEVELING_3POINT
# elif ENABLED(MESH_BED_LEVELING)
/**
* Mesh Bed Leveling
*/
# if ENABLED(DELTA)
# error "MESH_BED_LEVELING does not yet support DELTA printers."
# elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
# error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
# endif
# endif
2017-03-16 22:31:34 +01:00
/**
2017-03-13 06:24:22 +01:00
* LCD_BED_LEVELING requirements
2017-03-16 22:31:34 +01:00
*/
2017-06-01 04:44:05 +02:00
# if ENABLED(LCD_BED_LEVELING)
# if DISABLED(ULTIPANEL)
# error "LCD_BED_LEVELING requires an LCD controller."
# elif DISABLED(MESH_BED_LEVELING) && !(HAS_ABL && ENABLED(PROBE_MANUALLY))
# error "LCD_BED_LEVELING requires MESH_BED_LEVELING or PROBE_MANUALLY."
# endif
2017-03-16 22:31:34 +01:00
# endif
2016-09-23 00:10:20 +02:00
/**
* Homing Bump
*/
# if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0
# error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0."
# endif
2016-07-29 02:08:28 +02:00
/**
* Make sure Z_SAFE_HOMING point is reachable
*/
# if ENABLED(Z_SAFE_HOMING)
2017-03-31 16:00:49 +02:00
# if !WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X)
2016-07-29 02:08:28 +02:00
# if HAS_BED_PROBE
# error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe."
# else
# error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."
# endif
2017-03-31 16:00:49 +02:00
# elif !WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y)
2016-07-29 02:08:28 +02:00
# if HAS_BED_PROBE
# error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe."
# else
# error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."
# endif
# endif
# endif // Z_SAFE_HOMING
/**
* Advance Extrusion
*/
# if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE)
# error "You can enable ADVANCE or LIN_ADVANCE, but not both."
# endif
/**
* Filament Width Sensor
*/
# if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
# error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
# endif
/**
* ULTIPANEL encoder
*/
# if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
# error "ULTIPANEL requires some kind of encoder."
# endif
# if ENCODER_PULSES_PER_STEP < 0
# error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
# endif
/**
* SAV_3DGLCD display options
*/
# if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
# error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
# endif
/**
* Allen Key
* Deploying the Allen Key probe uses big moves in z direction . Too dangerous for an unhomed z - axis .
*/
# if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
# error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
# endif
/**
* Dual X Carriage requirements
*/
# if ENABLED(DUAL_X_CARRIAGE)
# if EXTRUDERS == 1
# error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
2016-11-06 05:47:38 +01:00
# elif CORE_IS_XY || CORE_IS_XZ
# error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
2016-07-29 02:08:28 +02:00
# elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
# error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
# elif !HAS_X_MAX
# error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
# elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
# error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
# elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
# error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
# endif
# endif // DUAL_X_CARRIAGE
/**
* Make sure auto fan pins don ' t conflict with the fan pin
*/
# if HAS_AUTO_FAN
# if HAS_FAN0
2016-10-23 01:25:42 +02:00
# if E0_AUTO_FAN_PIN == FAN_PIN
# error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
# elif E1_AUTO_FAN_PIN == FAN_PIN
# error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
# elif E2_AUTO_FAN_PIN == FAN_PIN
# error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
# elif E3_AUTO_FAN_PIN == FAN_PIN
# error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
2016-07-29 02:08:28 +02:00
# endif
# endif
# endif
2017-05-03 03:18:31 +02:00
# if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
# error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
2016-07-29 02:08:28 +02:00
# endif
2017-05-04 23:38:29 +02:00
# if ENABLED(USE_CONTROLLER_FAN)
2017-05-03 03:18:31 +02:00
# if !HAS_CONTROLLER_FAN
# error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h."
# elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
# error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
# elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
# error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
# elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
# error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
# elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
# error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
2016-07-29 02:08:28 +02:00
# endif
# endif
/**
* Test Heater , Temp Sensor , and Extruder Pins ; Sensor Type must also be set .
*/
# if !HAS_HEATER_0
# error "HEATER_0_PIN not defined for this board."
2017-01-08 17:17:56 +01:00
# elif !PIN_EXISTS(TEMP_0) && !(defined(MAX6675_SS) && MAX6675_SS >= 0)
2016-07-29 02:08:28 +02:00
# error "TEMP_0_PIN not defined for this board."
# elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
# error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
# elif TEMP_SENSOR_0 == 0
# error "TEMP_SENSOR_0 is required."
# endif
# if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
# if !HAS_HEATER_1
# error "HEATER_1_PIN not defined for this board."
# endif
# endif
# if HOTENDS > 1
# if TEMP_SENSOR_1 == 0
# error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
# elif !PIN_EXISTS(TEMP_1)
# error "TEMP_1_PIN not defined for this board."
# endif
# if HOTENDS > 2
# if TEMP_SENSOR_2 == 0
# error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
# elif !HAS_HEATER_2
# error "HEATER_2_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_2)
# error "TEMP_2_PIN not defined for this board."
# endif
# if HOTENDS > 3
# if TEMP_SENSOR_3 == 0
2017-04-06 23:45:29 +02:00
# error "TEMP_SENSOR_3 is required with 4 or more HOTENDS."
2016-07-29 02:08:28 +02:00
# elif !HAS_HEATER_3
# error "HEATER_3_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_3)
# error "TEMP_3_PIN not defined for this board."
# endif
2017-04-06 23:45:29 +02:00
# if HOTENDS > 4
# if TEMP_SENSOR_4 == 0
# error "TEMP_SENSOR_4 is required with 5 HOTENDS."
# elif !HAS_HEATER_4
# error "HEATER_4_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_4)
# error "TEMP_4_PIN not defined for this board."
# endif
# elif TEMP_SENSOR_4 != 0
# error "TEMP_SENSOR_4 shouldn't be set with only 4 extruders."
# endif
2016-07-29 02:08:28 +02:00
# elif TEMP_SENSOR_3 != 0
# error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders."
2017-04-06 23:45:29 +02:00
# elif TEMP_SENSOR_4 != 0
# error "TEMP_SENSOR_4 shouldn't be set with only 3 extruders."
2016-07-29 02:08:28 +02:00
# endif
# elif TEMP_SENSOR_2 != 0
# error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders."
# elif TEMP_SENSOR_3 != 0
# error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders."
2017-04-06 23:45:29 +02:00
# elif TEMP_SENSOR_4 != 0
# error "TEMP_SENSOR_4 shouldn't be set with only 2 extruders."
2016-07-29 02:08:28 +02:00
# endif
# elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
# error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder."
# elif TEMP_SENSOR_2 != 0
# error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder."
# elif TEMP_SENSOR_3 != 0
# error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder."
2017-04-06 23:45:29 +02:00
# elif TEMP_SENSOR_4 != 0
# error "TEMP_SENSOR_4 shouldn't be set with only 1 extruder."
2016-07-29 02:08:28 +02:00
# endif
# if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
# error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
# endif
2016-09-24 23:26:57 +02:00
/**
* Temperature status LEDs
*/
2016-10-23 03:07:48 +02:00
# if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
# error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
2016-09-24 23:26:57 +02:00
# endif
2016-07-29 02:08:28 +02:00
/**
* Basic 2 - nozzle duplication mode
*/
# if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
# if HOTENDS != 2
# error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
# elif ENABLED(DUAL_X_CARRIAGE)
# error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
# elif ENABLED(SINGLENOZZLE)
# error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
# elif ENABLED(MIXING_EXTRUDER)
# error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
# elif ENABLED(SWITCHING_EXTRUDER)
# error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
# endif
# endif
/**
* Test Extruder Pins
*/
2017-04-06 23:45:29 +02:00
# if EXTRUDERS > 4
# if !PIN_EXISTS(E4_STEP) || !PIN_EXISTS(E4_DIR) || !PIN_EXISTS(E4_ENABLE)
# error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
# endif
# elif EXTRUDERS > 3
2016-07-29 02:08:28 +02:00
# if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
# error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
# endif
# elif EXTRUDERS > 2
# if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
# error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
# endif
# elif EXTRUDERS > 1
# if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
# error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
# endif
# endif
/**
* Endstops
*/
2017-03-31 16:00:49 +02:00
# if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _XMAX_, _XMIN_))
2016-08-08 01:54:56 +02:00
# error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
2017-03-31 16:00:49 +02:00
# elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _YMAX_, _YMIN_))
2016-08-08 01:54:56 +02:00
# error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
2017-03-31 16:00:49 +02:00
# elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _ZMAX_, _ZMIN_))
2016-08-08 01:54:56 +02:00
# error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
# elif ENABLED(Z_DUAL_ENDSTOPS)
# if !Z2_USE_ENDSTOP
# error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
2017-05-02 22:38:39 +02:00
# elif Z2_MAX_PIN == 0 && Z2_MIN_PIN == 0
# error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
2016-08-08 01:54:56 +02:00
# elif ENABLED(DELTA)
# error "Z_DUAL_ENDSTOPS is not compatible with DELTA."
# endif
2016-09-12 03:11:39 +02:00
# elif !IS_SCARA
2016-09-05 22:08:26 +02:00
# if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
# error "Enable USE_XMIN_PLUG when homing X to MIN."
# elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
# error "Enable USE_XMAX_PLUG when homing X to MAX."
# elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
# error "Enable USE_YMIN_PLUG when homing Y to MIN."
# elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
# error "Enable USE_YMAX_PLUG when homing Y to MAX."
# elif Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG)
# error "Enable USE_ZMIN_PLUG when homing Z to MIN."
# elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
# error "Enable USE_ZMAX_PLUG when homing Z to MAX."
# endif
2016-07-29 02:08:28 +02:00
# endif
/**
* emergency - command parser
*/
2016-08-09 06:49:57 +02:00
# if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
2016-07-29 02:08:28 +02:00
# error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
# endif
2016-08-12 09:51:25 +02:00
/**
* I2C bus
*/
# if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
# if I2C_SLAVE_ADDRESS < 8
# error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
# elif I2C_SLAVE_ADDRESS > 127
# error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
# endif
# endif
2016-09-12 06:33:09 +02:00
2016-09-26 08:30:34 +02:00
/**
* G38 Probe Target
*/
2016-09-29 22:06:01 +02:00
# if ENABLED(G38_PROBE_TARGET)
2016-09-26 08:30:34 +02:00
# if !HAS_BED_PROBE
2016-09-29 22:06:01 +02:00
# error "G38_PROBE_TARGET requires a bed probe."
2016-09-26 08:30:34 +02:00
# elif !IS_CARTESIAN
2016-09-29 22:06:01 +02:00
# error "G38_PROBE_TARGET requires a Cartesian machine."
2016-09-26 08:30:34 +02:00
# endif
# endif
2016-11-30 02:51:13 +01:00
/**
* RGB_LED Requirements
*/
2017-04-11 19:58:55 +02:00
# define _RGB_TEST (PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B))
2016-11-30 02:51:13 +01:00
# if ENABLED(RGB_LED)
2017-04-11 19:58:55 +02:00
# if !_RGB_TEST
2016-11-30 02:51:13 +01:00
# error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
2017-04-11 19:58:55 +02:00
# elif ENABLED(RGBW_LED)
# error "Please enable only one of RGB_LED and RGBW_LED."
2016-11-30 02:51:13 +01:00
# endif
2017-04-11 19:58:55 +02:00
# elif ENABLED(RGBW_LED)
# if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
# error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
# endif
2017-06-10 08:02:15 +02:00
# elif ENABLED(PRINTER_EVENT_LEDS) && DISABLED(BLINKM) && DISABLED(PCA9632)
# error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, or RGBW_LED."
2016-11-30 02:51:13 +01:00
# endif
2016-10-23 01:26:34 +02:00
/**
* Auto Fan check for PWM pins
*/
# if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
# define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
# if HAS_AUTO_FAN_0
static_assert ( GET_TIMER ( E0_AUTO_FAN_PIN ) , " E0 " AF_ERR_SUFF ) ;
# elif HAS_AUTO_FAN_1
static_assert ( GET_TIMER ( E1_AUTO_FAN_PIN ) , " E1 " AF_ERR_SUFF ) ;
# elif HAS_AUTO_FAN_2
static_assert ( GET_TIMER ( E2_AUTO_FAN_PIN ) , " E2 " AF_ERR_SUFF ) ;
# elif HAS_AUTO_FAN_3
static_assert ( GET_TIMER ( E3_AUTO_FAN_PIN ) , " E3 " AF_ERR_SUFF ) ;
# endif
# endif
2016-09-12 06:33:09 +02:00
/**
* Make sure only one display is enabled
*
* Note : BQ_LCD_SMART_CONTROLLER = > REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
* REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER = > REPRAP_DISCOUNT_SMART_CONTROLLER
* SAV_3DGLCD = > U8GLIB_SH1106 = > ULTIMAKERCONTROLLER
* miniVIKI = > ULTIMAKERCONTROLLER
* VIKI2 = > ULTIMAKERCONTROLLER
* ELB_FULL_GRAPHIC_CONTROLLER = > ULTIMAKERCONTROLLER
* PANEL_ONE = > ULTIMAKERCONTROLLER
*/
2017-03-16 22:31:34 +01:00
static_assert ( 1 > = 0
# if ENABLED(ULTIMAKERCONTROLLER) \
& & DISABLED ( SAV_3DGLCD ) & & DISABLED ( miniVIKI ) & & DISABLED ( VIKI2 ) \
& & DISABLED ( ELB_FULL_GRAPHIC_CONTROLLER ) & & DISABLED ( PANEL_ONE )
+ 1
# endif
# if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ 1
# endif
# if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
+ 1
# endif
# if ENABLED(CARTESIO_UI)
+ 1
# endif
# if ENABLED(PANEL_ONE)
+ 1
# endif
# if ENABLED(MAKRPANEL)
+ 1
# endif
# if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+ 1
# endif
# if ENABLED(VIKI2)
+ 1
# endif
# if ENABLED(miniVIKI)
+ 1
# endif
# if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+ 1
# endif
# if ENABLED(G3D_PANEL)
+ 1
# endif
# if ENABLED(MINIPANEL)
+ 1
# endif
# if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI)
+ 1
# endif
# if ENABLED(RIGIDBOT_PANEL)
+ 1
# endif
# if ENABLED(RA_CONTROL_PANEL)
+ 1
# endif
# if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
+ 1
# endif
# if ENABLED(LCM1602)
+ 1
# endif
# if ENABLED(LCD_I2C_PANELOLU2)
+ 1
# endif
# if ENABLED(LCD_I2C_VIKI)
+ 1
# endif
2017-03-09 02:56:01 +01:00
# if ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2)
2017-03-16 22:31:34 +01:00
+ 1
# endif
# if ENABLED(SAV_3DLCD)
+ 1
# endif
# if ENABLED(BQ_LCD_SMART_CONTROLLER)
+ 1
# endif
# if ENABLED(SAV_3DGLCD)
+ 1
# endif
2017-03-09 02:56:01 +01:00
# if ENABLED(OLED_PANEL_TINYBOY2)
+ 1
# endif
2017-03-16 22:31:34 +01:00
, " Please select no more than one LCD controller option. "
) ;
2017-04-13 13:25:43 +02:00
2017-06-06 14:19:27 +02:00
/**
* Make sure HAVE_TMCDRIVER is warranted
*/
# if ENABLED(HAVE_TMCDRIVER) && !( \
ENABLED ( X_IS_TMC ) \
| | ENABLED ( X2_IS_TMC ) \
| | ENABLED ( Y_IS_TMC ) \
| | ENABLED ( Y2_IS_TMC ) \
| | ENABLED ( Z_IS_TMC ) \
| | ENABLED ( Z2_IS_TMC ) \
| | ENABLED ( E0_IS_TMC ) \
| | ENABLED ( E1_IS_TMC ) \
| | ENABLED ( E2_IS_TMC ) \
| | ENABLED ( E3_IS_TMC ) \
| | ENABLED ( E4_IS_TMC ) \
)
# error "HAVE_TMCDRIVER requires at least one TMC stepper to be set."
2017-04-15 05:43:56 +02:00
# endif
2017-06-06 14:19:27 +02:00
/**
* Make sure HAVE_TMC2130 is warranted
*/
# if ENABLED(HAVE_TMC2130)
# if !( ENABLED( X_IS_TMC2130 ) \
| | ENABLED ( X2_IS_TMC2130 ) \
| | ENABLED ( Y_IS_TMC2130 ) \
| | ENABLED ( Y2_IS_TMC2130 ) \
| | ENABLED ( Z_IS_TMC2130 ) \
| | ENABLED ( Z2_IS_TMC2130 ) \
| | ENABLED ( E0_IS_TMC2130 ) \
| | ENABLED ( E1_IS_TMC2130 ) \
| | ENABLED ( E2_IS_TMC2130 ) \
| | ENABLED ( E3_IS_TMC2130 ) \
| | ENABLED ( E4_IS_TMC2130 ) \
)
# error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set."
# elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
# error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
# endif
# endif
/**
* Make sure HAVE_L6470DRIVER is warranted
*/
# if ENABLED(HAVE_L6470DRIVER) && !( \
ENABLED ( X_IS_L6470 ) \
| | ENABLED ( X2_IS_L6470 ) \
| | ENABLED ( Y_IS_L6470 ) \
| | ENABLED ( Y2_IS_L6470 ) \
| | ENABLED ( Z_IS_L6470 ) \
| | ENABLED ( Z2_IS_L6470 ) \
| | ENABLED ( E0_IS_L6470 ) \
| | ENABLED ( E1_IS_L6470 ) \
| | ENABLED ( E2_IS_L6470 ) \
| | ENABLED ( E3_IS_L6470 ) \
| | ENABLED ( E4_IS_L6470 ) \
)
# error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
2017-04-15 05:43:56 +02:00
# endif
2017-06-06 13:10:10 +02:00
/**
* Digipot requirement
*/
# if ENABLED(DIGIPOT_MCP4018)
# if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
| | ! defined ( DIGIPOTS_I2C_SDA_E0 ) | | ! defined ( DIGIPOTS_I2C_SDA_E1 )
# error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
# endif
# endif
2017-04-13 13:25:43 +02:00
/**
* Require 4 or more elements in per - axis initializers
*/
constexpr float sanity_arr_1 [ ] = DEFAULT_AXIS_STEPS_PER_UNIT ,
sanity_arr_2 [ ] = DEFAULT_MAX_FEEDRATE ,
sanity_arr_3 [ ] = DEFAULT_MAX_ACCELERATION ;
static_assert ( COUNT ( sanity_arr_1 ) > = XYZE , " DEFAULT_AXIS_STEPS_PER_UNIT requires 4 (or more) elements. " ) ;
static_assert ( COUNT ( sanity_arr_2 ) > = XYZE , " DEFAULT_MAX_FEEDRATE requires 4 (or more) elements. " ) ;
static_assert ( COUNT ( sanity_arr_3 ) > = XYZE , " DEFAULT_MAX_ACCELERATION requires 4 (or more) elements. " ) ;
static_assert ( COUNT ( sanity_arr_1 ) < = XYZE_N , " DEFAULT_AXIS_STEPS_PER_UNIT has too many elements. " ) ;
static_assert ( COUNT ( sanity_arr_2 ) < = XYZE_N , " DEFAULT_MAX_FEEDRATE has too many elements. " ) ;
static_assert ( COUNT ( sanity_arr_3 ) < = XYZE_N , " DEFAULT_MAX_ACCELERATION has too many elements. " ) ;
2017-04-07 20:52:05 +02:00
/**
* Sanity checks for Spindle / Laser
*/
# if ENABLED(SPINDLE_LASER_ENABLE)
# if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
# error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
# elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
# error "SPINDLE_DIR_PIN not defined."
# elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
# if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46))
# error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
# elif SPINDLE_LASER_POWERUP_DELAY < 1
# error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
# elif SPINDLE_LASER_POWERDOWN_DELAY < 1
# error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
# elif !defined(SPINDLE_LASER_PWM_INVERT)
# error "SPINDLE_LASER_PWM_INVERT missing."
# elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
# error "SPINDLE_LASER_PWM equation constant(s) missing."
# elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
# error "Counter / Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
# elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN
# error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop."
# elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN
# error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop."
# elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN
# error "SPINDLE_LASER_PWM pin in use by Z_STEP."
# elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
# error "Counter / Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
# elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
# error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
# elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
# elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
# elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
# elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
# elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
# elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
# elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
# error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
# elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
# error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
# elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
# error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
# elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
# error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY."
# elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN
# error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z."
# elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN
# error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E."
# elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
# error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT."
# endif
# endif
# endif // SPINDLE_LASER_ENABLE