2017-03-31 21:03:38 +02:00
/**
2016-03-24 19:01:20 +01:00
* Marlin 3 D Printer Firmware
* Copyright ( C ) 2016 MarlinFirmware [ https : //github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl .
* Copyright ( C ) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 3 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program . If not , see < http : //www.gnu.org/licenses/>.
*
*/
2016-03-25 07:19:46 +01:00
/**
* Example configuration file for OpenBeam Kossel Pro
*/
2015-05-15 00:45:54 +02:00
2016-03-25 07:19:46 +01:00
/**
* Configuration . h
*
* Basic settings such as :
*
* - Type of electronics
* - Type of temperature sensor
* - Printer geometry
* - Endstop configuration
* - LCD controller
* - Extra features
*
* Advanced settings can be found in Configuration_adv . h
*
*/
2015-05-15 00:45:54 +02:00
# ifndef CONFIGURATION_H
# define CONFIGURATION_H
2017-07-27 10:02:53 +02:00
# define CONFIGURATION_H_VERSION 020000
2016-04-22 18:42:26 +02:00
2015-05-15 00:45:54 +02:00
//===========================================================================
//============================= Getting Started =============================
//===========================================================================
2016-03-25 07:19:46 +01:00
/**
* Here are some standard links for getting your machine calibrated :
*
2015-05-15 00:45:54 +02:00
* http : //reprap.org/wiki/Calibration
* http : //youtu.be/wAL9d7FgInk
* http : //calculator.josefprusa.cz
* http : //reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
* http : //www.thingiverse.com/thing:5573
* https : //sites.google.com/site/repraplogphase/calibration-of-your-reprap
* http : //www.thingiverse.com/thing:298812
2016-03-25 07:19:46 +01:00
*/
2015-05-15 00:45:54 +02:00
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
2017-06-24 19:37:10 +02:00
// For a Delta printer start with one of the configuration files in the
2017-09-06 13:28:32 +02:00
// config/examples/delta directory and customize for your machine.
2015-05-15 00:45:54 +02:00
//
//===========================================================================
//============================= SCARA Printer ===============================
//===========================================================================
2017-06-24 19:37:10 +02:00
// For a SCARA printer start with the configuration files in
2017-09-06 13:28:32 +02:00
// config/examples/SCARA and customize for your machine.
2015-05-15 00:45:54 +02:00
//
2015-05-14 23:56:04 +02:00
// @section info
2015-05-15 00:45:54 +02:00
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
# define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
2015-07-31 23:43:01 +02:00
# define SHOW_BOOTSCREEN
2016-09-27 21:15:55 +02:00
# define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
# define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
2016-07-15 01:03:55 +02:00
//
// *** VENDORS PLEASE READ *****************************************************
//
// Marlin now allow you to have a vendor boot image to be displayed on machine
// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
2017-02-25 22:54:16 +01:00
// custom boot image and then the default Marlin boot image is shown.
2016-07-15 01:03:55 +02:00
//
// We suggest for you to take advantage of this new feature and keep the Marlin
// boot image unmodified. For an example have a look at the bq Hephestos 2
// example configuration folder.
//
//#define SHOW_CUSTOM_BOOTSCREEN
2017-09-27 07:33:12 +02:00
2015-05-15 00:45:54 +02:00
// @section machine
2016-09-27 21:15:55 +02:00
/**
* Select which serial port on the board will be used for communication with the host .
* This allows the connection of wireless adapters ( for instance ) to non - default port pins .
* Serial port 0 is always used by the Arduino bootloader regardless of this setting .
*
2016-11-08 22:31:21 +01:00
* : [ 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ]
2016-09-27 21:15:55 +02:00
*/
2015-05-15 00:45:54 +02:00
# define SERIAL_PORT 0
2016-09-27 21:15:55 +02:00
/**
* This setting determines the communication speed of the printer .
*
* 250000 works in most cases , but you might try a lower speed if
* you commonly experience drop - outs during host printing .
2017-10-02 09:47:48 +02:00
* You may try up to 1000000 to speed up SD file transfer .
2016-09-27 21:15:55 +02:00
*
2017-10-02 09:47:48 +02:00
* : [ 2400 , 9600 , 19200 , 38400 , 57600 , 115200 , 250000 , 500000 , 1000000 ]
2016-09-27 21:15:55 +02:00
*/
2016-10-22 07:48:52 +02:00
# define BAUDRATE 115200
2015-05-15 00:45:54 +02:00
2015-08-01 01:55:47 +02:00
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
2015-05-15 00:45:54 +02:00
// The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup
# ifndef MOTHERBOARD
# define MOTHERBOARD BOARD_BRAINWAVE_PRO
# endif
// Optional custom name for your RepStrap or other custom machine
// Displayed in the LCD "Ready" message
# define CUSTOM_MACHINE_NAME "Kossel Pro"
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
2015-09-15 19:36:08 +02:00
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
2015-05-15 00:45:54 +02:00
2017-04-07 20:52:05 +02:00
// @section extruder
2015-05-15 00:45:54 +02:00
// This defines the number of extruders
2017-04-09 10:23:05 +02:00
// :[1, 2, 3, 4, 5]
2015-05-15 00:45:54 +02:00
# define EXTRUDERS 1
2016-05-21 00:45:11 +02:00
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
2017-06-02 20:57:31 +02:00
/**
* Průša MK2 Single Nozzle Multi - Material Multiplexer , and variants .
*
* This device allows one stepper driver on a control board to drive
* two to eight stepper motors , one at a time , in a manner suitable
* for extruders .
*
* This option only allows the multiplexer to switch on tool - change .
* Additional options to configure custom E moves are pending .
*/
//#define MK2_MULTIPLEXER
# if ENABLED(MK2_MULTIPLEXER)
// Override the default DIO selector pins here, if needed.
// Some pins files may provide defaults for these pins.
//#define E_MUX0_PIN 40 // Always Required
//#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers
//#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers
# endif
2016-06-28 23:13:49 +02:00
// A dual extruder that uses a single stepper motor
//#define SWITCHING_EXTRUDER
# if ENABLED(SWITCHING_EXTRUDER)
# define SWITCHING_EXTRUDER_SERVO_NR 0
2017-08-03 22:26:54 +02:00
# define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
# if EXTRUDERS > 3
# define SWITCHING_EXTRUDER_E23_SERVO_NR 1
# endif
2017-05-12 21:09:40 +02:00
# endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
//#define SWITCHING_NOZZLE
# if ENABLED(SWITCHING_NOZZLE)
# define SWITCHING_NOZZLE_SERVO_NR 0
# define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
//#define HOTEND_OFFSET_Z { 0.0, 0.0 }
2016-06-28 23:13:49 +02:00
# endif
2017-08-13 23:35:59 +02:00
/**
* Two separate X - carriages with extruders that connect to a moving part
* via a magnetic docking mechanism . Requires SOL1_PIN and SOL2_PIN .
*/
//#define PARKING_EXTRUDER
# if ENABLED(PARKING_EXTRUDER)
# define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
# define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
# define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined.
# define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
# define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder
# define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking
# define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0.
# endif
2016-06-28 23:13:49 +02:00
/**
* " Mixing Extruder "
* - Adds a new code , M165 , to set the current mix factors .
* - Extends the stepping routines to move multiple steppers in proportion to the mix .
2017-04-22 19:52:48 +02:00
* - Optional support for Repetier Firmware M163 , M164 , and virtual extruder .
2016-06-28 23:13:49 +02:00
* - This implementation supports only a single extruder .
* - Enable DIRECT_MIXING_IN_G1 for Pia Taubert ' s reference implementation
*/
//#define MIXING_EXTRUDER
# if ENABLED(MIXING_EXTRUDER)
# define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
# define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
//#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
# endif
2015-05-15 00:45:54 +02:00
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
2016-05-27 02:43:20 +02:00
//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
2015-05-15 00:45:54 +02:00
2017-04-07 20:52:05 +02:00
// @section machine
2016-09-27 21:15:55 +02:00
/**
* Select your power supply here . Use 0 if you haven ' t connected the PS_ON_PIN
*
* 0 = No Power Switch
* 1 = ATX
* 2 = X - Box 360 203 Watts ( the blue wire connected to PS_ON and the red wire to VCC )
*
2016-11-08 22:31:21 +01:00
* : { 0 : ' No power switch ' , 1 : ' ATX ' , 2 : ' X - Box 360 ' }
2016-09-27 21:15:55 +02:00
*/
2015-05-15 00:45:54 +02:00
# define POWER_SUPPLY 1
2016-09-27 21:15:55 +02:00
# if POWER_SUPPLY > 0
// Enable this option to leave the PSU off at startup.
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
# endif
2015-05-15 00:45:54 +02:00
// @section temperature
//===========================================================================
//============================= Thermal Settings ============================
//===========================================================================
2016-11-19 05:20:49 +01:00
/**
* - - NORMAL IS 4.7 kohm PULLUP ! - - 1 kohm pullup can be used on hotend sensor , using correct resistor and table
2016-12-15 16:21:32 +01:00
*
2016-11-19 05:20:49 +01:00
* Temperature sensors available :
*
* - 3 : thermocouple with MAX31855 ( only for sensor 0 )
* - 2 : thermocouple with MAX6675 ( only for sensor 0 )
* - 1 : thermocouple with AD595
* 0 : not used
* 1 : 100 k thermistor - best choice for EPCOS 100 k ( 4.7 k pullup )
* 2 : 200 k thermistor - ATC Semitec 204 GT - 2 ( 4.7 k pullup )
* 3 : Mendel - parts thermistor ( 4.7 k pullup )
* 4 : 10 k thermistor ! ! do not use it for a hotend . It gives bad resolution at high temp . ! !
* 5 : 100 K thermistor - ATC Semitec 104 GT - 2 ( Used in ParCan & J - Head ) ( 4.7 k pullup )
* 6 : 100 k EPCOS - Not as accurate as table 1 ( created using a fluke thermocouple ) ( 4.7 k pullup )
* 7 : 100 k Honeywell thermistor 135 - 104L AG - J01 ( 4.7 k pullup )
* 71 : 100 k Honeywell thermistor 135 - 104L AF - J01 ( 4.7 k pullup )
* 8 : 100 k 0603 SMD Vishay NTCS0603E3104FXT ( 4.7 k pullup )
* 9 : 100 k GE Sensing AL03006 - 58.2 K - 97 - G1 ( 4.7 k pullup )
* 10 : 100 k RS thermistor 198 - 961 ( 4.7 k pullup )
* 11 : 100 k beta 3950 1 % thermistor ( 4.7 k pullup )
* 12 : 100 k 0603 SMD Vishay NTCS0603E3104FXT ( 4.7 k pullup ) ( calibrated for Makibox hot bed )
* 13 : 100 k Hisens 3950 1 % up to 300 ° C for hotend " Simple ONE " & " Hotend " All In ONE "
* 20 : the PT100 circuit found in the Ultimainboard V2 . x
* 60 : 100 k Maker ' s Tool Works Kapton Bed Thermistor beta = 3950
* 66 : 4.7 M High Temperature thermistor from Dyze Design
* 70 : the 100 K thermistor found in the bq Hephestos 2
2017-03-13 06:24:22 +01:00
* 75 : 100 k Generic Silicon Heat Pad with NTC 100 K MGB18 - 104F 39050L 32 thermistor
2016-12-15 16:21:32 +01:00
*
2016-11-19 05:20:49 +01:00
* 1 k ohm pullup tables - This is atypical , and requires changing out the 4.7 k pullup for 1 k .
* ( but gives greater accuracy and more stable PID )
* 51 : 100 k thermistor - EPCOS ( 1 k pullup )
* 52 : 200 k thermistor - ATC Semitec 204 GT - 2 ( 1 k pullup )
* 55 : 100 k thermistor - ATC Semitec 104 GT - 2 ( Used in ParCan & J - Head ) ( 1 k pullup )
2016-12-15 16:21:32 +01:00
*
2016-11-19 05:20:49 +01:00
* 1047 : Pt1000 with 4 k7 pullup
* 1010 : Pt1000 with 1 k pullup ( non standard )
* 147 : Pt100 with 4 k7 pullup
* 110 : Pt100 with 1 k pullup ( non standard )
*
* Use these for Testing or Development purposes . NEVER for production machine .
* 998 : Dummy Table that ALWAYS reads 25 ° C or the temperature defined below .
* 999 : Dummy Table that ALWAYS reads 100 ° C or the temperature defined below .
*
* : { ' 0 ' : " Not used " , ' 1 ' : " 100k / 4.7k - EPCOS " , ' 2 ' : " 200k / 4.7k - ATC Semitec 204GT-2 " , ' 3 ' : " Mendel-parts / 4.7k " , ' 4 ' : " 10k !! do not use for a hotend. Bad resolution at high temp. !! " , ' 5 ' : " 100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head) " , ' 6 ' : " 100k / 4.7k EPCOS - Not as accurate as Table 1 " , ' 7 ' : " 100k / 4.7k Honeywell 135-104LAG-J01 " , ' 8 ' : " 100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT " , ' 9 ' : " 100k / 4.7k GE Sensing AL03006-58.2K-97-G1 " , ' 10 ' : " 100k / 4.7k RS 198-961 " , ' 11 ' : " 100k / 4.7k beta 3950 1% " , ' 12 ' : " 100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed) " , ' 13 ' : " 100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE' " , ' 20 ' : " PT100 (Ultimainboard V2.x) " , ' 51 ' : " 100k / 1k - EPCOS " , ' 52 ' : " 200k / 1k - ATC Semitec 204GT-2 " , ' 55 ' : " 100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head) " , ' 60 ' : " 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 " , ' 66 ' : " Dyze Design 4.7M High Temperature thermistor " , ' 70 ' : " the 100K thermistor found in the bq Hephestos 2 " , ' 71 ' : " 100k / 4.7k Honeywell 135-104LAF-J01 " , ' 147 ' : " Pt100 / 4.7k " , ' 1047 ' : " Pt1000 / 4.7k " , ' 110 ' : " Pt100 / 1k (non-standard) " , ' 1010 ' : " Pt1000 / 1k (non standard) " , ' - 3 ' : " Thermocouple + MAX31855 (only for sensor 0) " , ' - 2 ' : " Thermocouple + MAX6675 (only for sensor 0) " , ' - 1 ' : " Thermocouple + AD595 " , ' 998 ' : " Dummy 1 " , ' 999 ' : " Dummy 2 " }
*/
2015-05-15 00:45:54 +02:00
# define TEMP_SENSOR_0 5
# define TEMP_SENSOR_1 0
# define TEMP_SENSOR_2 0
# define TEMP_SENSOR_3 0
2017-04-06 23:45:29 +02:00
# define TEMP_SENSOR_4 0
2015-05-15 00:45:54 +02:00
# define TEMP_SENSOR_BED 5
2016-11-19 05:22:04 +01:00
// Dummy thermistor constant temperature readings, for use with 998 and 999
# define DUMMY_THERMISTOR_998_VALUE 25
# define DUMMY_THERMISTOR_999_VALUE 100
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
// from the two sensors differ too much the print will be aborted.
2015-05-15 00:45:54 +02:00
//#define TEMP_SENSOR_1_AS_REDUNDANT
# define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
2016-04-14 16:03:38 +02:00
// Extruder temperature must be close to target for this long before M109 returns success
2015-05-15 00:45:54 +02:00
# define TEMP_RESIDENCY_TIME 10 // (seconds)
# define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
# define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
2016-04-14 16:03:38 +02:00
// Bed temperature must be close to target for this long before M190 returns success
# define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
# define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
# define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
2015-05-15 00:45:54 +02:00
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
# define HEATER_0_MINTEMP 5
# define HEATER_1_MINTEMP 5
# define HEATER_2_MINTEMP 5
# define HEATER_3_MINTEMP 5
2017-04-06 23:45:29 +02:00
# define HEATER_4_MINTEMP 5
2015-05-15 00:45:54 +02:00
# define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
# define HEATER_0_MAXTEMP 275
# define HEATER_1_MAXTEMP 275
# define HEATER_2_MAXTEMP 275
# define HEATER_3_MAXTEMP 275
2017-04-06 23:45:29 +02:00
# define HEATER_4_MAXTEMP 275
2015-05-15 00:45:54 +02:00
# define BED_MAXTEMP 150
//===========================================================================
//============================= PID Settings ================================
//===========================================================================
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
// Comment the following line to disable PID and enable bang-bang.
# define PIDTEMP
# define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
2016-10-09 23:13:58 +02:00
# define PID_MAX 125 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
2015-07-23 03:23:23 +02:00
# if ENABLED(PIDTEMP)
2016-03-26 03:04:17 +01:00
//#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
2015-05-15 00:45:54 +02:00
//#define PID_DEBUG // Sends debug data to the serial port.
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
2016-05-27 02:43:20 +02:00
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2]
2016-10-09 23:13:58 +02:00
# define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
2015-05-15 00:45:54 +02:00
# define K1 0.95 //smoothing factor within the PID
2015-06-15 06:57:06 +02:00
// Kossel Pro
# define DEFAULT_Kp 19.30
# define DEFAULT_Ki 3.51
# define DEFAULT_Kd 26.56
2015-05-15 00:45:54 +02:00
# endif // PIDTEMP
//===========================================================================
//============================= PID > Bed Temperature Control ===============
//===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
//
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
// shouldn't use bed PID until someone else verifies your hardware works.
// If this is enabled, find your own PID constants below.
# define PIDTEMPBED
2015-06-12 13:12:55 +02:00
2015-05-15 00:45:54 +02:00
//#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
# define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
2015-07-23 03:23:23 +02:00
# if ENABLED(PIDTEMPBED)
2015-06-15 06:57:06 +02:00
2016-03-26 03:07:50 +01:00
//#define PID_BED_DEBUG // Sends debug data to the serial port.
2015-06-15 06:57:06 +02:00
//Kossel Pro heated bed plate with borosilicate glass
//from pidautotune (M303 E-1 S60 C8)
# define DEFAULT_bedKp 370.25
# define DEFAULT_bedKi 62.77
# define DEFAULT_bedKd 545.98
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
2015-05-15 00:45:54 +02:00
# endif // PIDTEMPBED
// @section extruder
2016-08-21 06:34:24 +02:00
// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
// It also enables the M302 command to set the minimum extrusion temperature
// or to allow moving the extruder regardless of the hotend temperature.
// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
# define PREVENT_COLD_EXTRUSION
2015-05-15 00:45:54 +02:00
# define EXTRUDE_MINTEMP 170
2016-08-21 06:34:24 +02:00
// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
2016-09-14 01:10:18 +02:00
// Note that for Bowden Extruders a too-small value here may prevent loading.
2016-08-21 06:34:24 +02:00
# define PREVENT_LENGTHY_EXTRUDE
2016-09-14 01:10:18 +02:00
# define EXTRUDE_MAXLENGTH 200
2015-05-15 00:45:54 +02:00
//===========================================================================
//======================== Thermal Runaway Protection =======================
//===========================================================================
/**
2016-03-19 14:08:59 +01:00
* Thermal Protection protects your printer from damage and fire if a
2015-05-15 00:45:54 +02:00
* thermistor falls out or temperature sensors fail in any way .
*
* The issue : If a thermistor falls out or a temperature sensor fails ,
* Marlin can no longer sense the actual temperature . Since a disconnected
* thermistor reads as a low temperature , the firmware will keep the heater on .
*
2016-03-19 14:08:59 +01:00
* If you get " Thermal Runaway " or " Heating failed " errors the
* details can be tuned in Configuration_adv . h
2015-05-15 00:45:54 +02:00
*/
2015-06-12 13:20:39 +02:00
# define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
# define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
2015-05-15 00:45:54 +02:00
//===========================================================================
//============================= Mechanical Settings =========================
//===========================================================================
// @section machine
2016-05-20 22:22:16 +02:00
// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
2016-11-06 05:47:24 +01:00
// either in the usual order or reversed
2015-09-15 19:36:08 +02:00
//#define COREXY
//#define COREXZ
2016-05-20 22:22:16 +02:00
//#define COREYZ
2016-11-06 05:47:24 +01:00
//#define COREYX
//#define COREZX
//#define COREZY
2015-06-16 02:28:43 +02:00
2015-05-15 00:45:54 +02:00
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
// Enable DELTA kinematics and most of the default configuration for Deltas
# define DELTA
2015-07-23 03:23:23 +02:00
# if ENABLED(DELTA)
2015-06-12 13:12:55 +02:00
2015-06-15 06:57:06 +02:00
// Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments)
// and processor overload (too many expensive sqrt calls).
# define DELTA_SEGMENTS_PER_SECOND 160
2015-05-15 00:45:54 +02:00
2017-06-29 16:42:42 +02:00
// After homing move down to a height where XY movement is unconstrained
//#define DELTA_HOME_TO_SAFE_ZONE
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
// Delta calibration menu
2017-06-29 16:42:42 +02:00
// uncomment to add three points calibration menu option.
2016-04-16 07:04:50 +02:00
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
2017-06-29 16:42:42 +02:00
// uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
2017-03-31 21:03:38 +02:00
//#define DELTA_AUTO_CALIBRATION
2017-06-29 16:42:42 +02:00
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
2017-03-31 21:03:38 +02:00
# if ENABLED(DELTA_AUTO_CALIBRATION)
2017-06-29 16:42:42 +02:00
// set the default number of probe points : n*n (1 -> 7)
# define DELTA_CALIBRATION_DEFAULT_POINTS 4
2017-03-31 21:03:38 +02:00
# endif
2017-06-29 16:42:42 +02:00
# if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
// Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
# define DELTA_CALIBRATION_RADIUS 110.0 // mm
2017-07-07 09:43:33 +02:00
// Set the steprate for papertest probing
# define PROBE_MANUALLY_STEP 0.025
2017-06-29 16:42:42 +02:00
# endif
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
# define DELTA_PRINTABLE_RADIUS 127.0 // mm
// Center-to-center distance of the holes in the diagonal push rods.
# define DELTA_DIAGONAL_ROD 301.0 // mm
// height from z=0 to home position
# define DELTA_HEIGHT 277.00 // get this value from auto calibrate
2016-11-21 06:12:07 +01:00
2017-06-29 16:42:42 +02:00
# define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate
2016-10-09 20:32:30 +02:00
2017-06-29 16:42:42 +02:00
// Horizontal distance bridged by diagonal push rods when effector is centered.
# define DELTA_RADIUS 152.357 //mm Get this value from auto calibrate
2017-07-07 04:24:30 +02:00
2017-02-27 20:39:00 +01:00
// Trim adjustments for individual towers
2017-04-18 14:43:25 +02:00
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer
2017-06-29 16:42:42 +02:00
# define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate
2017-04-18 14:43:25 +02:00
// delta radius and diaginal rod adjustments measured in mm
2017-06-29 16:42:42 +02:00
//#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 }
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
2017-02-27 20:39:00 +01:00
2015-05-15 00:45:54 +02:00
# endif
2016-03-02 11:00:34 +01:00
//===========================================================================
//============================== Endstop Settings ===========================
//===========================================================================
2015-05-15 00:45:54 +02:00
// @section homing
2016-03-02 11:00:34 +01:00
// Specify here all the endstop connectors that are connected to any endstop or probe.
// Almost all printers will be using one per axis. Probes will use one or more of the
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
//#define USE_XMIN_PLUG
//#define USE_YMIN_PLUG
# define USE_ZMIN_PLUG // a Z probe
# define USE_XMAX_PLUG
# define USE_YMAX_PLUG
# define USE_ZMAX_PLUG
2015-05-15 00:45:54 +02:00
// coarse Endstop Settings
# define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
2015-08-03 21:30:37 +02:00
# if DISABLED(ENDSTOPPULLUPS)
2015-05-15 00:45:54 +02:00
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
2015-09-15 19:36:08 +02:00
//#define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX
//#define ENDSTOPPULLUP_XMIN
//#define ENDSTOPPULLUP_YMIN
//#define ENDSTOPPULLUP_ZMIN
//#define ENDSTOPPULLUP_ZMIN_PROBE
2015-05-15 00:45:54 +02:00
# endif
2015-06-12 13:20:39 +02:00
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
2016-06-01 10:14:58 +02:00
# define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
# define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
2016-12-07 10:37:37 +01:00
# define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
2015-05-15 00:45:54 +02:00
2016-11-19 04:53:45 +01:00
// Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
2016-11-05 22:38:48 +01:00
//#define ENDSTOP_INTERRUPTS_FEATURE
2016-08-29 08:45:50 +02:00
//=============================================================================
//============================== Movement Settings ============================
//=============================================================================
// @section motion
# define XYZ_FULL_STEPS_PER_ROTATION 200
# define XYZ_MICROSTEPS 32
# define XYZ_BELT_PITCH 2
# define XYZ_PULLEY_TEETH 20
// delta speeds must be the same on xyz
# define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
2016-09-14 01:15:35 +02:00
/**
* Default Settings
*
* These settings can be reset by M502
*
* Note that if EEPROM is enabled , saved values will override these .
*/
2017-04-29 12:37:46 +02:00
/**
* With this option each E stepper can have its own factors for the
* following movement settings . If fewer factors are given than the
* total number of extruders , the last value applies to the rest .
*/
//#define DISTINCT_E_FACTORS
2016-09-14 01:15:35 +02:00
/**
* Default Axis Steps Per Unit ( steps / mm )
* Override with M92
2017-05-07 07:28:06 +02:00
* X , Y , Z , E0 [ , E1 [ , E2 [ , E3 [ , E4 ] ] ] ]
2016-09-14 01:15:35 +02:00
*/
2016-12-04 05:02:27 +01:00
# define DEFAULT_AXIS_STEPS_PER_UNIT { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 }
2016-09-14 01:15:35 +02:00
/**
* Default Max Feed Rate ( mm / s )
* Override with M203
2017-05-07 07:28:06 +02:00
* X , Y , Z , E0 [ , E1 [ , E2 [ , E3 [ , E4 ] ] ] ]
2016-09-14 01:15:35 +02:00
*/
2016-09-14 02:01:04 +02:00
# define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 }
2016-09-14 01:15:35 +02:00
/**
* Default Max Acceleration ( change / s ) change = mm / s
2016-12-04 05:02:27 +01:00
* ( Maximum start speed for accelerated moves )
2016-09-14 01:15:35 +02:00
* Override with M201
2017-05-07 07:28:06 +02:00
* X , Y , Z , E0 [ , E1 [ , E2 [ , E3 [ , E4 ] ] ] ]
2016-09-14 01:15:35 +02:00
*/
2016-09-14 02:01:04 +02:00
# define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 }
2016-09-14 01:15:35 +02:00
/**
* Default Acceleration ( change / s ) change = mm / s
* Override with M204
*
* M204 P Acceleration
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
# define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
# define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
# define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/**
2016-10-22 12:56:32 +02:00
* Default Jerk ( mm / s )
2016-12-07 21:45:44 +01:00
* Override with M205 X Y Z E
2016-09-14 01:15:35 +02:00
*
* " Jerk " specifies the minimum speed change that requires acceleration .
* When changing speed and direction , if the difference is less than the
* value set here , it may happen instantaneously .
*/
2016-10-02 11:37:13 +02:00
# define DEFAULT_XJERK 20.0
# define DEFAULT_YJERK 20.0
2016-09-14 01:15:35 +02:00
# define DEFAULT_ZJERK 20.0 // Must be same as XY for delta
# define DEFAULT_EJERK 5.0
2016-08-29 08:45:50 +02:00
2017-04-29 11:26:53 +02:00
//===========================================================================
//============================= Z Probe Options =============================
//===========================================================================
// @section probes
//
// See http://marlinfw.org/configuration/probes.html
//
2016-08-29 08:45:50 +02:00
2017-01-11 02:23:22 +01:00
/**
2017-04-29 11:26:53 +02:00
* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
2017-01-11 02:23:22 +01:00
*
2017-04-29 11:26:53 +02:00
* Enable this option for a probe connected to the Z Min endstop pin .
*/
# define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/**
* Z_MIN_PROBE_ENDSTOP
*
* Enable this option for a probe connected to any pin except Z - Min .
* ( By default Marlin assumes the Z - Max endstop pin . )
* To use a custom Z Probe pin , set Z_MIN_PROBE_PIN below .
2017-01-11 02:23:22 +01:00
*
2017-04-29 11:26:53 +02:00
* - The simplest option is to use a free endstop connector .
* - Use 5 V for powered ( usually inductive ) sensors .
2017-01-11 02:23:22 +01:00
*
2017-04-29 11:26:53 +02:00
* - RAMPS 1.3 / 1.4 boards may use the 5 V , GND , and Aux4 - > D32 pin :
* - For simple switches connect . . .
* - normally - closed switches to GND and D32 .
* - normally - open switches to 5 V and D32 .
*
* WARNING : Setting the wrong pin may have unexpected and potentially
* disastrous consequences . Use with caution and do your homework .
2017-01-11 02:23:22 +01:00
*
*/
2017-04-29 11:26:53 +02:00
//#define Z_MIN_PROBE_ENDSTOP
2016-06-15 03:03:17 +02:00
2017-01-11 02:23:22 +01:00
/**
2017-04-29 11:26:53 +02:00
* Probe Type
*
* Allen Key Probes , Servo Probes , Z - Sled Probes , FIX_MOUNTED_PROBE , etc .
* Activate one of these to use Auto Bed Leveling below .
*/
/**
* The " Manual Probe " provides a means to do " Auto " Bed Leveling without a probe .
* Use G29 repeatedly , adjusting the Z height at each point with movement commands
* or ( with LCD_BED_LEVELING ) the LCD controller .
2017-01-11 02:23:22 +01:00
*/
2017-03-13 06:24:22 +01:00
//#define PROBE_MANUALLY
2017-01-11 02:23:22 +01:00
/**
2017-04-29 11:26:53 +02:00
* A Fix - Mounted Probe either doesn ' t deploy or needs manual deployment .
* ( e . g . , an inductive probe or a nozzle - based probe - switch . )
2017-01-11 02:23:22 +01:00
*/
2016-06-15 03:03:17 +02:00
//#define FIX_MOUNTED_PROBE
2017-01-11 02:23:22 +01:00
/**
2017-04-29 11:26:53 +02:00
* Z Servo Probe , such as an endstop switch on a rotating arm .
2017-01-11 02:23:22 +01:00
*/
//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
/**
2017-05-07 13:06:06 +02:00
* The BLTouch probe uses a Hall effect sensor and emulates a servo .
2017-01-11 02:23:22 +01:00
*/
2017-04-29 11:26:53 +02:00
//#define BLTOUCH
# if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
# endif
2016-06-15 03:03:17 +02:00
2017-05-07 13:06:06 +02:00
/**
2017-07-13 18:15:59 +02:00
* Enable one or more of the following if probing seems unreliable .
* Heaters and / or fans can be disabled during probing to minimize electrical
* noise . A delay can also be added to allow noise and vibration to settle .
* These options are most useful for the BLTouch probe , but may also improve
* readings with inductive probes and piezo sensors .
2017-05-07 13:06:06 +02:00
*/
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
//#define PROBING_FANS_OFF // Turn fans off when probing
2017-07-13 18:15:59 +02:00
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
2017-05-07 13:06:06 +02:00
2017-04-14 23:36:02 +02:00
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
2017-04-29 11:26:53 +02:00
// A sled-mounted probe like those designed by Charles Bell.
2016-06-15 03:03:17 +02:00
//#define Z_PROBE_SLED
2017-01-11 02:23:22 +01:00
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
2016-06-15 03:03:17 +02:00
2017-04-29 11:26:53 +02:00
//
// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
//
2017-01-11 02:23:22 +01:00
/**
* Z Probe to nozzle ( X , Y ) offset , relative to ( 0 , 0 ) .
* X and Y offsets must be integers .
*
* In the following example the X and Y offsets are both positive :
* # define X_PROBE_OFFSET_FROM_EXTRUDER 10
* # define Y_PROBE_OFFSET_FROM_EXTRUDER 10
*
* + - - BACK - - - +
* | |
* L | ( + ) P | R < - - probe ( 20 , 20 )
* E | | I
* F | ( - ) N ( + ) | G < - - nozzle ( 10 , 10 )
* T | | H
* | ( - ) | T
* | |
* O - - FRONT - - +
* ( 0 , 0 )
*/
2016-06-15 03:03:17 +02:00
# define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919
# define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304
2017-01-11 02:23:22 +01:00
/**
* Kossel Pro note : The correct value is likely - 17.45 but I ' d rather err on the side of
* not giving someone a head crash . Use something like G29 Z - 0.2 to adjust as needed .
*/
2016-06-15 03:03:17 +02:00
# define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero).
2017-04-08 09:49:40 +02:00
// X and Y axis travel speed (mm/m) between probes
2016-06-22 11:44:55 +02:00
# define XY_PROBE_SPEED 8000
2017-01-11 02:23:22 +01:00
2017-04-08 09:49:40 +02:00
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
2016-07-20 03:21:38 +02:00
# define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
2017-01-11 02:23:22 +01:00
2017-04-08 09:49:40 +02:00
// Speed for the "accurate" probe of each point
2016-07-18 15:52:41 +02:00
# define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
2017-01-11 02:23:22 +01:00
2017-04-08 09:49:40 +02:00
// Use double touch for probing
double bump probing as a feature
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
//#define PROBE_DOUBLE_TOUCH
2016-06-22 11:44:55 +02:00
2017-01-11 02:23:22 +01:00
/**
* Allen key retractable z - probe as seen on many Kossel delta printers - http : //reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
* Deploys by touching z - axis belt . Retracts by pushing the probe down . Uses Z_MIN_PIN .
*/
2016-06-15 03:03:17 +02:00
# define Z_PROBE_ALLEN_KEY
# if ENABLED(Z_PROBE_ALLEN_KEY)
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
// Kossel Pro
# define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
# define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
# define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
2016-06-22 11:38:50 +02:00
# define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
2016-06-15 03:03:17 +02:00
# define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
# define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
# define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
2016-06-22 11:38:50 +02:00
# define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
2016-06-15 03:03:17 +02:00
2016-07-04 09:46:22 +02:00
# define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75
# define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75
# define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
# define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
2016-09-27 21:15:55 +02:00
# define Z_PROBE_ALLEN_KEY_DEPLOY_4_X 45.00 // Move right to trigger deploy pin
# define Z_PROBE_ALLEN_KEY_DEPLOY_4_Y -125.00
# define Z_PROBE_ALLEN_KEY_DEPLOY_4_Z Z_PROBE_ALLEN_KEY_DEPLOY_3_Z
# define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE (XY_PROBE_SPEED) / 2
2016-06-15 03:03:17 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
# define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00
# define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
2016-06-22 11:38:50 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
2016-06-15 03:03:17 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe
# define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y
# define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0
2016-06-22 11:38:50 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED) / 2
2016-06-15 03:03:17 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100
# define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
# define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
2016-06-22 11:38:50 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
2016-06-15 03:03:17 +02:00
2016-07-04 09:46:22 +02:00
# define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0
# define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0
# define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z
# define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED
2016-06-15 03:03:17 +02:00
# endif // Z_PROBE_ALLEN_KEY
2016-09-14 03:25:12 +02:00
/**
* Z probes require clearance when deploying , stowing , and moving between
* probe points to avoid hitting the bed and other hardware .
* Servo - mounted probes require extra space for the arm to rotate .
* Inductive probes need space to keep from triggering early .
*
* Use these settings to specify the distance ( mm ) to raise the probe ( or
* lower the bed ) . The values set here apply over and above any ( negative )
* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER , M851 , or the LCD .
* Only integer values > = 1 are valid here .
*
2016-09-20 10:49:42 +02:00
* Example : ` M851 Z - 5 ` with a CLEARANCE of 4 = > 9 mm from bed to nozzle .
* But : ` M851 Z + 1 ` with a CLEARANCE of 2 = > 2 mm from bed to nozzle .
2016-09-14 03:25:12 +02:00
*/
2016-09-20 10:49:42 +02:00
# define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow
# define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
2017-02-21 13:49:31 +01:00
2017-04-09 11:20:06 +02:00
// For M851 give a range for adjusting the Z probe offset
2016-06-03 01:02:43 +02:00
2016-06-21 12:33:45 +02:00
# define Z_PROBE_OFFSET_RANGE_MIN -15
# define Z_PROBE_OFFSET_RANGE_MAX 5
2016-06-15 03:03:17 +02:00
2017-04-29 11:26:53 +02:00
// Enable the M48 repeatability test to test probe accuracy
//#define Z_MIN_PROBE_REPEATABILITY_TEST
2015-05-15 00:45:54 +02:00
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
2016-11-08 22:31:21 +01:00
// :{ 0:'Low', 1:'High' }
2015-05-15 00:45:54 +02:00
# define X_ENABLE_ON 0
# define Y_ENABLE_ON 0
# define Z_ENABLE_ON 0
# define E_ENABLE_ON 0 // For all extruders
2015-10-08 22:23:44 +02:00
// Disables axis stepper immediately when it's not being used.
2015-05-15 00:45:54 +02:00
// WARNING: When motors turn off there is a chance of losing position accuracy!
# define DISABLE_X false
# define DISABLE_Y false
# define DISABLE_Z false
2015-10-08 22:23:44 +02:00
// Warn on display about possibly reduced accuracy
2015-11-04 14:19:33 +01:00
//#define DISABLE_REDUCED_ACCURACY_WARNING
2015-05-15 00:45:54 +02:00
// @section extruder
# define DISABLE_E false // For all extruders
2017-04-29 11:26:53 +02:00
# define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled.
2015-05-15 00:45:54 +02:00
// @section machine
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
# define INVERT_X_DIR true
# define INVERT_Y_DIR true
# define INVERT_Z_DIR true
2017-02-14 11:32:18 +01:00
// Enable this option for Toshiba stepper drivers
//#define CONFIG_STEPPERS_TOSHIBA
2015-05-15 00:45:54 +02:00
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
# define INVERT_E0_DIR true
# define INVERT_E1_DIR false
# define INVERT_E2_DIR false
# define INVERT_E3_DIR false
2017-04-06 23:45:29 +02:00
# define INVERT_E4_DIR false
2015-05-15 00:45:54 +02:00
// @section homing
2016-07-15 01:05:37 +02:00
2017-10-02 04:36:48 +02:00
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
2016-08-04 05:51:05 +02:00
//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure you have this distance over your Z_MAX_POS in case.
2015-05-15 00:45:54 +02:00
2017-03-17 02:03:57 +01:00
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]
2015-05-15 00:45:54 +02:00
# define X_HOME_DIR 1 // deltas always home to max
# define Y_HOME_DIR 1
# define Z_HOME_DIR 1
// @section machine
2017-07-22 05:54:39 +02:00
// The size of the print bed
# define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
# define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
// Travel limits (mm) after homing, corresponding to endstop positions.
2016-04-18 04:45:27 +02:00
# define X_MIN_POS -(DELTA_PRINTABLE_RADIUS)
# define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS)
2015-05-15 00:45:54 +02:00
# define Z_MIN_POS 0
# define X_MAX_POS DELTA_PRINTABLE_RADIUS
# define Y_MAX_POS DELTA_PRINTABLE_RADIUS
# define Z_MAX_POS MANUAL_Z_HOME_POS
2017-03-17 02:03:57 +01:00
// If enabled, axes won't move below MIN_POS in response to movement commands.
# define MIN_SOFTWARE_ENDSTOPS
// If enabled, axes won't move above MAX_POS in response to movement commands.
# define MAX_SOFTWARE_ENDSTOPS
2016-12-24 04:14:22 +01:00
/**
* Filament Runout Sensor
* A mechanical or opto endstop is used to check for the presence of filament .
*
* RAMPS - based boards use SERVO3_PIN .
* For other boards you may need to define FIL_RUNOUT_PIN .
* By default the firmware assumes HIGH = has filament , LOW = ran out
*/
//#define FILAMENT_RUNOUT_SENSOR
2015-07-23 03:23:23 +02:00
# if ENABLED(FILAMENT_RUNOUT_SENSOR)
2016-11-09 17:21:21 +01:00
# define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
2015-05-15 00:45:54 +02:00
# define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
# define FILAMENT_RUNOUT_SCRIPT "M600"
# endif
//===========================================================================
2017-03-18 16:02:54 +01:00
//=============================== Bed Leveling ==============================
2015-05-15 00:45:54 +02:00
//===========================================================================
// @section bedlevel
2016-09-26 06:17:39 +02:00
/**
2017-03-20 07:42:41 +01:00
* Choose one of the options below to enable G29 Bed Leveling . The parameters
* and behavior of G29 will change depending on your selection .
2016-09-26 06:17:39 +02:00
*
2017-03-20 07:42:41 +01:00
* If using a Probe for Z Homing , enable Z_SAFE_HOMING also !
2016-09-26 06:17:39 +02:00
*
2017-03-20 07:42:41 +01:00
* - AUTO_BED_LEVELING_3POINT
2016-09-26 06:17:39 +02:00
* Probe 3 arbitrary points on the bed ( that aren ' t collinear )
* You specify the XY coordinates of all 3 points .
* The result is a single tilted plane . Best for a flat bed .
*
2017-03-20 07:42:41 +01:00
* - AUTO_BED_LEVELING_LINEAR
2016-09-26 06:17:39 +02:00
* Probe several points in a grid .
* You specify the rectangle and the density of sample points .
* The result is a single tilted plane . Best for a flat bed .
*
2017-03-20 07:42:41 +01:00
* - AUTO_BED_LEVELING_BILINEAR
2016-09-26 06:17:39 +02:00
* Probe several points in a grid .
* You specify the rectangle and the density of sample points .
* The result is a mesh , best for large or uneven beds .
2017-03-18 16:02:54 +01:00
*
2017-03-20 07:42:41 +01:00
* - AUTO_BED_LEVELING_UBL ( Unified Bed Leveling )
* A comprehensive bed leveling system combining the features and benefits
* of other systems . UBL also includes integrated Mesh Generation , Mesh
* Validation and Mesh Editing systems . Currently , UBL is only checked out
* for Cartesian Printers . That said , it was primarily designed to correct
* poor quality Delta Printers . If you feel adventurous and have a Delta ,
* please post an issue if something doesn ' t work correctly . Initially ,
* you will need to set a reduced bed size so you have a rectangular area
* to test on .
*
* - MESH_BED_LEVELING
* Probe a grid manually
* The result is a mesh , suitable for large or uneven beds . ( See BILINEAR . )
* For machines without a probe , Mesh Bed Leveling provides a method to perform
* leveling in steps so you can manually adjust the Z height at each grid - point .
* With an LCD controller the process is guided step - by - step .
2016-09-26 06:17:39 +02:00
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
2017-03-18 16:02:54 +01:00
//#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
2017-03-20 07:42:41 +01:00
//#define MESH_BED_LEVELING
2016-07-23 08:37:41 +02:00
2016-09-26 06:17:39 +02:00
/**
* Enable detailed logging of G28 , G29 , M48 , etc .
* Turn on with the command ' M111 S32 ' .
* NOTE : Requires a lot of PROGMEM !
*/
2015-08-05 14:12:26 +02:00
//#define DEBUG_LEVELING_FEATURE
2016-06-21 12:10:46 +02:00
2017-03-18 16:02:54 +01:00
# if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
// Gradually reduce leveling correction until a set height is reached,
// at which point movement will be level to the machine's XY plane.
// The height can be set with M420 Z<height>
//#define ENABLE_LEVELING_FADE_HEIGHT
2017-05-16 22:25:30 +02:00
2017-05-16 18:23:50 +02:00
// Set the boundaries for probing (where the probe can reach).
# define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
2017-05-16 22:25:30 +02:00
2017-03-18 16:02:54 +01:00
# endif
2016-09-26 06:17:39 +02:00
# if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension.
2017-04-06 05:29:44 +02:00
# define GRID_MAX_POINTS_X 7
# define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
2016-09-26 06:17:39 +02:00
# define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
# define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
# define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
# define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
// The Z probe minimum outer margin (to validate G29 parameters).
# define MIN_PROBE_EDGE 10
2016-09-29 08:19:59 +02:00
// Probe along the Y axis, advancing X after each column
//#define PROBE_Y_FIRST
2016-11-26 06:32:47 +01:00
# if ENABLED(AUTO_BED_LEVELING_BILINEAR)
2016-11-05 17:01:26 +01:00
2017-05-04 07:19:07 +02:00
// Beyond the probed grid, continue the implied tilt?
// Default is to maintain the height of the nearest edge.
//#define EXTRAPOLATE_BEYOND_GRID
2016-12-15 16:21:32 +01:00
//
2016-11-05 17:01:26 +01:00
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
2016-12-15 16:21:32 +01:00
//
2016-11-05 17:01:26 +01:00
//#define ABL_BILINEAR_SUBDIVISION
# if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points
# define BILINEAR_SUBDIVISIONS 3
# endif
2016-11-26 06:32:47 +01:00
# endif
2016-09-26 06:17:39 +02:00
# elif ENABLED(AUTO_BED_LEVELING_3POINT)
// 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed.
# define ABL_PROBE_PT_1_X 15
# define ABL_PROBE_PT_1_Y 180
# define ABL_PROBE_PT_2_X 15
# define ABL_PROBE_PT_2_Y 20
# define ABL_PROBE_PT_3_X 170
# define ABL_PROBE_PT_3_Y 20
2017-03-20 07:42:41 +01:00
# elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
//========================= Unified Bed Leveling ============================
//===========================================================================
# define UBL_MESH_INSET 1 // Mesh inset margin on print area
2017-04-06 05:29:44 +02:00
# define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
# define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
2017-06-07 16:40:07 +02:00
# define _PX(R,A) (R) * cos(RADIANS(A))
# define _PY(R,A) (R) * sin(RADIANS(A))
# define UBL_PROBE_PT_1_X _PX(DELTA_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh
# define UBL_PROBE_PT_1_Y _PY(DELTA_PROBEABLE_RADIUS, 0)
# define UBL_PROBE_PT_2_X _PX(DELTA_PROBEABLE_RADIUS, 120)
# define UBL_PROBE_PT_2_Y _PY(DELTA_PROBEABLE_RADIUS, 120)
# define UBL_PROBE_PT_3_X _PX(DELTA_PROBEABLE_RADIUS, 240)
# define UBL_PROBE_PT_3_Y _PY(DELTA_PROBEABLE_RADIUS, 240)
2017-05-21 18:10:22 +02:00
# define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
# define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
2017-03-20 07:42:41 +01:00
2017-03-18 16:02:54 +01:00
# elif ENABLED(MESH_BED_LEVELING)
2017-03-18 18:20:26 +01:00
//===========================================================================
//=================================== Mesh ==================================
//===========================================================================
2017-03-18 16:02:54 +01:00
# define MESH_INSET 10 // Mesh inset margin on print area
2017-04-06 05:29:44 +02:00
# define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
# define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
2017-03-18 16:02:54 +01:00
2017-03-18 18:20:26 +01:00
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
2017-03-18 16:02:54 +01:00
2017-03-13 06:24:22 +01:00
# endif // BED_LEVELING
2017-03-18 16:02:54 +01:00
2017-03-13 06:24:22 +01:00
/**
* Use the LCD controller for bed leveling
* Requires MESH_BED_LEVELING or PROBE_MANUALLY
*/
//#define LCD_BED_LEVELING
2017-03-18 16:02:54 +01:00
2017-03-13 06:24:22 +01:00
# if ENABLED(LCD_BED_LEVELING)
# define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
# define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
# endif
2016-09-26 06:17:39 +02:00
2017-09-27 07:44:21 +02:00
// Add a menu item to move between bed corners for manual bed adjustment
# define LEVEL_BED_CORNERS
2016-09-26 06:17:39 +02:00
/**
* Commands to execute at the end of G29 probing .
* Useful to retract or move the Z probe out of the way .
*/
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
2015-05-15 00:45:54 +02:00
// @section homing
2016-07-29 04:51:48 +02:00
// The center of the bed is at (X=0, Y=0)
# define BED_CENTER_AT_0_0
// Manually set the home position. Leave these undefined for automatic settings.
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
2017-03-31 21:03:38 +02:00
# define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
2015-05-15 00:45:54 +02:00
2016-04-21 02:04:52 +02:00
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//
// With this feature enabled:
//
// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
// - If stepper drivers time out, it will need X and Y homing again before Z homing.
2016-07-27 13:30:39 +02:00
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
2016-04-21 02:04:52 +02:00
// - Prevent Z homing when the Z probe is outside bed area.
2017-07-03 02:43:34 +02:00
//
2016-04-21 02:04:52 +02:00
# define Z_SAFE_HOMING
# if ENABLED(Z_SAFE_HOMING)
2017-08-03 22:26:54 +02:00
# define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
# define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
2016-04-21 02:04:52 +02:00
# endif
2016-07-20 02:11:57 +02:00
// Delta only homes to Z
# define HOMING_FEEDRATE_Z (200*60)
2015-05-15 00:45:54 +02:00
//=============================================================================
//============================= Additional Features ===========================
//=============================================================================
// @section extras
2016-04-16 07:04:50 +02:00
//
2015-05-15 00:45:54 +02:00
// EEPROM
2016-04-16 07:04:50 +02:00
//
2015-05-15 00:45:54 +02:00
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
// M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
2017-07-03 02:43:34 +02:00
//
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
# define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
2015-05-15 00:45:54 +02:00
2016-03-07 12:48:14 +01:00
//
// Host Keepalive
//
2016-05-10 15:05:33 +02:00
// When enabled Marlin will send a busy status message to the host
2016-04-07 02:30:23 +02:00
// every couple of seconds when it can't accept commands.
2016-03-07 12:48:14 +01:00
//
2016-09-27 21:15:55 +02:00
# define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
# define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
2017-07-06 23:26:13 +02:00
# define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
2016-03-07 12:48:14 +01:00
2015-08-20 16:07:55 +02:00
//
// M100 Free Memory Watcher
//
//#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
2016-05-31 17:26:08 +02:00
//
// G20/G21 Inch mode support
//
//#define INCH_MODE_SUPPORT
//
// M149 Set temperature units support
//
//#define TEMPERATURE_UNITS_SUPPORT
2015-05-15 00:45:54 +02:00
// @section temperature
// Preheat Constants
2016-07-10 00:20:12 +02:00
# define PREHEAT_1_TEMP_HOTEND 180
# define PREHEAT_1_TEMP_BED 70
# define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
2015-05-15 00:45:54 +02:00
2016-07-10 00:20:12 +02:00
# define PREHEAT_2_TEMP_HOTEND 240
# define PREHEAT_2_TEMP_BED 100
# define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
2015-05-15 00:45:54 +02:00
2017-05-05 20:30:19 +02:00
/**
* Nozzle Park - - EXPERIMENTAL
*
* Park the nozzle at the given XYZ position on idle or G27 .
*
* The " P " parameter controls the action applied to the Z axis :
*
* P0 ( Default ) If Z is below park Z raise the nozzle .
* P1 Raise the nozzle always to Z - park height .
* P2 Raise the nozzle by Z - park amount , limited to Z_MAX_POS .
*/
2016-07-14 17:42:58 +02:00
//#define NOZZLE_PARK_FEATURE
# if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z }
# define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
# endif
2017-05-05 20:30:19 +02:00
/**
* Clean Nozzle Feature - - EXPERIMENTAL
*
* Adds the G12 command to perform a nozzle cleaning process .
*
* Parameters :
* P Pattern
* S Strokes / Repetitions
* T Triangles ( P1 only )
*
* Patterns :
* P0 Straight line ( default ) . This process requires a sponge type material
* at a fixed bed location . " S " specifies strokes ( i . e . back - forth motions )
* between the start / end points .
*
* P1 Zig - zag pattern between ( X0 , Y0 ) and ( X1 , Y1 ) , " T " specifies the
* number of zig - zag triangles to do . " S " defines the number of strokes .
* Zig - zags are done in whichever is the narrower dimension .
* For example , " G12 P1 S1 T3 " will execute :
*
* - -
* | ( X0 , Y1 ) | / \ / \ / \ | ( X1 , Y1 )
* | | / \ / \ / \ |
* A | | / \ / \ / \ |
* | | / \ / \ / \ |
* | ( X0 , Y0 ) | / \ / \ / \ | ( X1 , Y0 )
* - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
* | ________ | _________ | _________ |
* T1 T2 T3
*
* P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE .
* " R " specifies the radius . " S " specifies the stroke count .
* Before starting , the nozzle moves to NOZZLE_CLEAN_START_POINT .
*
* Caveats : The ending Z should be the same as starting Z .
* Attention : EXPERIMENTAL . G - code arguments may change .
*
*/
2016-07-14 01:38:42 +02:00
//#define NOZZLE_CLEAN_FEATURE
# if ENABLED(NOZZLE_CLEAN_FEATURE)
2016-12-09 07:22:01 +01:00
// Default number of pattern repetitions
2016-07-14 01:38:42 +02:00
# define NOZZLE_CLEAN_STROKES 12
2017-02-25 22:54:16 +01:00
2016-12-09 07:22:01 +01:00
// Default number of triangles
# define NOZZLE_CLEAN_TRIANGLES 3
2016-07-14 01:38:42 +02:00
2016-07-19 03:46:34 +02:00
// Specify positions as { X, Y, Z }
# define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
# define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
2016-07-14 01:38:42 +02:00
2017-02-25 22:54:16 +01:00
// Circular pattern radius
# define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
// Circular pattern circle fragments number
# define NOZZLE_CLEAN_CIRCLE_FN 10
// Middle point of circle
# define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
2016-07-19 03:46:34 +02:00
// Moves the nozzle to the initial position
# define NOZZLE_CLEAN_GOBACK
2016-07-14 01:38:42 +02:00
# endif
2017-05-05 20:30:19 +02:00
/**
* Print Job Timer
*
* Automatically start and stop the print job timer on M104 / M109 / M190 .
*
* M104 ( hotend , no wait ) - high temp = none , low temp = stop timer
* M109 ( hotend , wait ) - high temp = start timer , low temp = stop timer
* M190 ( bed , wait ) - high temp = start timer , low temp = none
*
* The timer can also be controlled with the following commands :
*
* M75 - Start the print job timer
* M76 - Pause the print job timer
* M77 - Stop the print job timer
*/
2016-05-14 23:38:59 +02:00
# define PRINTJOB_TIMER_AUTOSTART
2016-04-28 03:36:38 +02:00
2017-05-05 20:30:19 +02:00
/**
* Print Counter
*
* Track statistical data such as :
*
* - Total print jobs
* - Total successful print jobs
* - Total failed print jobs
* - Total time printing
*
* View the current statistics with M78 .
*/
2016-04-28 03:36:38 +02:00
//#define PRINTCOUNTER
2016-04-16 07:04:50 +02:00
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================
2015-05-15 00:45:54 +02:00
// @section lcd
2017-05-05 20:30:19 +02:00
/**
* LCD LANGUAGE
*
* Select the language to display on the LCD . These languages are available :
*
2017-07-01 14:50:26 +02:00
* en , an , bg , ca , cn , cz , cz_utf8 , de , el , el - gr , es , eu , fi , fr , gl , hr ,
2017-08-20 10:34:02 +02:00
* it , kana , kana_utf8 , nl , pl , pt , pt_utf8 , pt - br , pt - br_utf8 , ru , sk_utf8 ,
* tr , uk , zh_CN , zh_TW , test
2017-05-05 20:30:19 +02:00
*
2017-08-20 10:34:02 +02:00
* : { ' en ' : ' English ' , ' an ' : ' Aragonese ' , ' bg ' : ' Bulgarian ' , ' ca ' : ' Catalan ' , ' cn ' : ' Chinese ' , ' cz ' : ' Czech ' , ' cz_utf8 ' : ' Czech ( UTF8 ) ' , ' de ' : ' German ' , ' el ' : ' Greek ' , ' el - gr ' : ' Greek ( Greece ) ' , ' es ' : ' Spanish ' , ' eu ' : ' Basque - Euskera ' , ' fi ' : ' Finnish ' , ' fr ' : ' French ' , ' gl ' : ' Galician ' , ' hr ' : ' Croatian ' , ' it ' : ' Italian ' , ' kana ' : ' Japanese ' , ' kana_utf8 ' : ' Japanese ( UTF8 ) ' , ' nl ' : ' Dutch ' , ' pl ' : ' Polish ' , ' pt ' : ' Portuguese ' , ' pt - br ' : ' Portuguese ( Brazilian ) ' , ' pt - br_utf8 ' : ' Portuguese ( Brazilian UTF8 ) ' , ' pt_utf8 ' : ' Portuguese ( UTF8 ) ' , ' ru ' : ' Russian ' , ' sk_utf8 ' : ' Slovak ( UTF8 ) ' , ' tr ' : ' Turkish ' , ' uk ' : ' Ukrainian ' , ' zh_CN ' : ' Chinese ( Simplified ) ' , ' zh_TW ' : ' Chinese ( Taiwan ) ' , test ' : ' TEST ' }
2017-05-05 20:30:19 +02:00
*/
2016-04-27 08:32:15 +02:00
# define LCD_LANGUAGE en
2015-05-15 00:45:54 +02:00
2017-05-05 20:30:19 +02:00
/**
* LCD Character Set
*
* Note : This option is NOT applicable to Graphical Displays .
*
* All character - based LCDs provide ASCII plus one of these
* language extensions :
*
* - JAPANESE . . . the most common
* - WESTERN . . . with more accented characters
* - CYRILLIC . . . for the Russian language
*
* To determine the language extension installed on your controller :
*
* - Compile and upload with LCD_LANGUAGE set to ' test '
* - Click the controller to view the LCD menu
* - The LCD will display Japanese , Western , or Cyrillic text
*
2017-09-06 13:28:32 +02:00
* See http : //marlinfw.org/docs/development/lcd_language.html
2017-05-05 20:30:19 +02:00
*
* : [ ' JAPANESE ' , ' WESTERN ' , ' CYRILLIC ' ]
*/
2016-04-27 07:25:50 +02:00
# define DISPLAY_CHARSET_HD44780 JAPANESE
2016-04-16 07:04:50 +02:00
2017-05-05 20:30:19 +02:00
/**
* LCD TYPE
*
* Enable ULTRA_LCD for a 16 x2 , 16 x4 , 20 x2 , or 20 x4 character - based LCD .
* Enable DOGLCD for a 128 x64 ( ST7565R ) Full Graphical Display .
* ( These options will be enabled automatically for most displays . )
*
* IMPORTANT : The U8glib library is required for Full Graphic Display !
* https : //github.com/olikraus/U8glib_Arduino
*/
2016-04-16 07:04:50 +02:00
//#define ULTRA_LCD // Character based
//#define DOGLCD // Full graphics display
2017-05-05 20:30:19 +02:00
/**
* SD CARD
*
* SD Card support is disabled by default . If your controller has an SD slot ,
* you must uncomment the following option or it won ' t work .
*
*/
2016-04-16 07:04:50 +02:00
# define SDSUPPORT
2017-05-05 20:30:19 +02:00
/**
* SD CARD : SPI SPEED
*
* Enable one of the following items for a slower SPI transfer speed .
* This may be required to resolve " volume init " errors .
*/
2016-04-16 07:04:50 +02:00
//#define SPI_SPEED SPI_HALF_SPEED
//#define SPI_SPEED SPI_QUARTER_SPEED
//#define SPI_SPEED SPI_EIGHTH_SPEED
2017-05-05 20:30:19 +02:00
/**
* SD CARD : ENABLE CRC
*
* Use CRC checks and retries on the SD communication .
*/
2016-04-16 07:04:50 +02:00
//#define SD_CHECK_AND_RETRY
//
// ENCODER SETTINGS
//
// This option overrides the default number of encoder pulses needed to
// produce one step. Should be increased for high-resolution encoders.
//
//#define ENCODER_PULSES_PER_STEP 1
//
// Use this option to override the number of step signals required to
// move between next/prev menu items.
//
//#define ENCODER_STEPS_PER_MENU_ITEM 5
2016-05-21 00:11:45 +02:00
/**
* Encoder Direction Options
*
* Test your encoder ' s behavior first with both options disabled .
*
* Reversed Value Edit and Menu Nav ? Enable REVERSE_ENCODER_DIRECTION .
* Reversed Menu Navigation only ? Enable REVERSE_MENU_DIRECTION .
* Reversed Value Editing only ? Enable BOTH options .
*/
2016-05-12 00:39:28 +02:00
//
2017-05-05 20:30:19 +02:00
// This option reverses the encoder direction everywhere.
2016-05-12 00:39:28 +02:00
//
// Set this option if CLOCKWISE causes values to DECREASE
//
//#define REVERSE_ENCODER_DIRECTION
2016-04-16 07:04:50 +02:00
//
// This option reverses the encoder direction for navigating LCD menus.
2016-04-29 05:27:17 +02:00
//
// If CLOCKWISE normally moves DOWN this makes it go UP.
// If CLOCKWISE normally moves UP this makes it go DOWN.
2016-04-16 07:04:50 +02:00
//
//#define REVERSE_MENU_DIRECTION
2016-05-10 14:29:25 +02:00
//
// Individual Axis Homing
//
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
//
//#define INDIVIDUAL_AXIS_HOMING_MENU
2016-04-16 07:04:50 +02:00
//
// SPEAKER/BUZZER
//
// If you have a speaker that can produce tones, enable it here.
// By default Marlin assumes you have a buzzer with a fixed frequency.
//
//#define SPEAKER
//
// The duration and frequency for the UI feedback sound.
// Set these to 0 to disable audio feedback in the LCD menus.
//
// Note: Test audio output with the G-Code:
// M300 S<frequency Hz> P<duration ms>
//
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
//
// CONTROLLER TYPE: Standard
//
// Marlin supports a wide variety of controllers.
// Enable one of the following options to specify your controller.
//
//
// ULTIMAKER Controller.
//
//#define ULTIMAKERCONTROLLER
//
// ULTIPANEL as seen on Thingiverse.
//
//#define ULTIPANEL
//
2015-06-12 13:20:39 +02:00
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne
2016-04-16 07:04:50 +02:00
//
2015-06-12 13:20:39 +02:00
//#define PANEL_ONE
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
//
// MaKr3d Makr-Panel with graphic controller and SD support.
2015-05-15 00:45:54 +02:00
// http://reprap.org/wiki/MaKr3d_MaKrPanel
2016-04-16 07:04:50 +02:00
//
2015-05-15 00:45:54 +02:00
//#define MAKRPANEL
2016-07-30 13:31:13 +02:00
//
// ReprapWorld Graphical LCD
// https://reprapworld.com/?products_details&products_id/1218
//
//#define REPRAPWORLD_GRAPHICAL_LCD
2016-04-16 07:04:50 +02:00
//
// Activate one of these if you have a Panucatt Devices
// Viki 2.0 or mini Viki with Graphic LCD
2015-05-15 00:45:54 +02:00
// http://panucatt.com
2016-04-16 07:04:50 +02:00
//
2015-05-15 00:45:54 +02:00
//#define VIKI2
//#define miniVIKI
//
2016-04-16 07:04:50 +02:00
// Adafruit ST7565 Full Graphic Controller.
// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
//
2015-05-15 00:45:54 +02:00
//#define ELB_FULL_GRAPHIC_CONTROLLER
2016-04-16 07:04:50 +02:00
//
// RepRapDiscount Smart Controller.
2015-05-15 00:45:54 +02:00
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
2016-04-16 07:04:50 +02:00
//
// Note: Usually sold with a white PCB.
//
2015-05-15 00:45:54 +02:00
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
2016-04-16 07:04:50 +02:00
//
// GADGETS3D G3D LCD/SD Controller
2015-05-15 00:45:54 +02:00
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
2016-04-16 07:04:50 +02:00
//
// Note: Usually sold with a blue PCB.
//
2015-05-15 00:45:54 +02:00
//#define G3D_PANEL
2016-04-16 07:04:50 +02:00
//
// RepRapDiscount FULL GRAPHIC Smart Controller
2015-05-15 00:45:54 +02:00
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
2016-04-16 07:04:50 +02:00
//
// MakerLab Mini Panel with graphic
// controller and SD support - http://reprap.org/wiki/Mini_panel
//
//#define MINIPANEL
//
// RepRapWorld REPRAPWORLD_KEYPAD v1.1
2015-05-15 00:45:54 +02:00
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
2016-04-16 07:04:50 +02:00
//
// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
// is pressed, a value of 10.0 means 10mm per click.
//
2015-05-15 00:45:54 +02:00
//#define REPRAPWORLD_KEYPAD
2016-06-08 02:13:56 +02:00
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
//
// RigidBot Panel V1.0
// http://www.inventapart.com/
//
//#define RIGIDBOT_PANEL
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
//
// BQ LCD Smart Controller shipped by
// default with the BQ Hephestos 2 and Witbox 2.
//
//#define BQ_LCD_SMART_CONTROLLER
2016-03-07 14:03:33 +01:00
2017-06-24 21:32:48 +02:00
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
2017-06-10 07:12:18 +02:00
//
// ANET_10 Controller supported displays.
//
//#define ANET_KEYPAD_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
// This LCD is known to be susceptible to electrical interference
// which scrambles the display. Pressing any button clears it up.
//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
// A clone of the RepRapDiscount full graphics display but with
// different pins/wiring (see pins_ANET_10.h).
2017-07-02 05:23:03 +02:00
//
// LCD for Melzi Card with Graphical LCD
//
//#define LCD_FOR_MELZI
2016-04-16 07:04:50 +02:00
//
// CONTROLLER TYPE: I2C
//
// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
//
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
//
// Elefu RA Board Control Panel
// http://www.elefu.com/index.php?route=product/product&product_id=53
//
//#define RA_CONTROL_PANEL
2015-05-15 00:45:54 +02:00
2016-04-16 07:04:50 +02:00
//
// Sainsmart YW Robot (LCM1602) LCD Display
//
2017-06-22 04:30:43 +02:00
// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
//
2015-05-15 00:45:54 +02:00
//#define LCD_I2C_SAINSMART_YWROBOT
2016-04-16 07:04:50 +02:00
//
// Generic LCM1602 LCD adapter
//
//#define LCM1602
2016-03-20 05:58:05 +01:00
2015-07-09 06:33:12 +02:00
//
2016-04-16 07:04:50 +02:00
// PANELOLU2 LCD with status LEDs,
// separate encoder and click inputs.
//
// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
// For more info: https://github.com/lincomatic/LiquidTWI2
//
// Note: The PANELOLU2 encoder click input can either be directly connected to
// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
//
2015-05-15 00:45:54 +02:00
//#define LCD_I2C_PANELOLU2
2016-04-16 07:04:50 +02:00
//
// Panucatt VIKI LCD with status LEDs,
// integrated click & L/R/U/D buttons, separate encoder inputs.
//
2015-05-15 00:45:54 +02:00
//#define LCD_I2C_VIKI
2015-10-13 12:47:49 +02:00
2016-04-16 07:04:50 +02:00
//
// SSD1306 OLED full graphics generic display
//
2015-06-12 13:20:39 +02:00
//#define U8GLIB_SSD1306
2015-05-15 00:45:54 +02:00
2016-06-21 13:51:27 +02:00
//
2016-05-31 20:47:37 +02:00
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
2016-06-21 13:51:27 +02:00
//
2016-05-31 20:47:37 +02:00
//#define SAV_3DGLCD
# if ENABLED(SAV_3DGLCD)
//#define U8GLIB_SSD1306
# define U8GLIB_SH1106
# endif
2016-04-16 07:04:50 +02:00
//
// CONTROLLER TYPE: Shift register panels
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
2015-06-12 13:20:39 +02:00
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
2016-04-16 07:04:50 +02:00
//
2015-06-12 13:20:39 +02:00
//#define SAV_3DLCD
2015-05-15 00:45:54 +02:00
2017-08-03 22:26:54 +02:00
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
2016-04-16 07:04:50 +02:00
//=============================================================================
//=============================== Extra Features ==============================
//=============================================================================
2015-05-15 00:45:54 +02:00
// @section extras
2016-03-06 05:41:15 +01:00
// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
2015-05-15 00:45:54 +02:00
//#define FAST_PWM_FAN
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
//#define FAN_SOFT_PWM
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
// However, control resolution will be halved for each increment;
// at zero value, there are 128 effective control positions.
# define SOFT_PWM_SCALE 0
2017-03-12 06:00:26 +01:00
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
// be used to mitigate the associated resolution loss. If enabled,
2017-03-13 06:24:22 +01:00
// some of the PWM cycles are stretched so on average the desired
2017-03-12 06:00:26 +01:00
// duty cycle is attained.
//#define SOFT_PWM_DITHER
2016-06-29 01:49:13 +02:00
// Temperature status LEDs that display the hotend and bed temperature.
2017-03-13 06:24:22 +01:00
// If all hotends, bed temperature, and target temperature are under 54C
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
2015-05-15 00:45:54 +02:00
//#define TEMP_STAT_LEDS
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
2015-09-15 19:36:08 +02:00
//#define PHOTOGRAPH_PIN 23
2015-05-15 00:45:54 +02:00
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX
2017-06-28 20:44:04 +02:00
// Support for the BariCUDA Paste Extruder
2015-05-15 00:45:54 +02:00
//#define BARICUDA
2017-06-28 20:44:04 +02:00
// Support for BlinkM/CyzRgb
2015-05-15 00:45:54 +02:00
//#define BLINKM
2017-06-28 20:44:04 +02:00
// Support for PCA9632 PWM LED driver
2017-06-10 08:02:15 +02:00
//#define PCA9632
2017-04-04 23:26:30 +02:00
/**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5 V digital pins , or
* an RGB Strip connected to MOSFETs controlled by digital pins .
*
2017-04-15 05:12:08 +02:00
* Adds the M150 command to set the LED ( or LED strip ) color .
2017-04-04 23:26:30 +02:00
* If pins are PWM capable ( e . g . , 4 , 5 , 6 , 11 ) then a range of
* luminance values can be set from 0 to 255.
*
* * * * CAUTION * * *
* LED Strips require a MOFSET Chip between PWM lines and LEDs ,
* as the Arduino cannot handle the current the LEDs will require .
* Failure to follow this precaution can destroy your Arduino !
* * * * CAUTION * * *
*
*/
2016-11-30 02:51:13 +01:00
//#define RGB_LED
2017-04-11 19:58:55 +02:00
//#define RGBW_LED
# if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
2016-11-30 02:51:13 +01:00
# define RGB_LED_R_PIN 34
# define RGB_LED_G_PIN 43
# define RGB_LED_B_PIN 35
2017-04-11 19:58:55 +02:00
# define RGB_LED_W_PIN -1
2016-11-30 02:51:13 +01:00
# endif
2017-07-13 17:01:21 +02:00
// Support for Adafruit Neopixel LED driver
//#define NEOPIXEL_RGBW_LED
# if ENABLED(NEOPIXEL_RGBW_LED)
# define NEOPIXEL_PIN 4 // D4 (EXP2-5 on Printrboard)
# define NEOPIXEL_PIXELS 3
//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
# endif
2017-04-04 23:26:30 +02:00
/**
* Printer Event LEDs
*
* During printing , the LEDs will reflect the printer status :
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
2017-07-13 17:01:21 +02:00
# if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
2017-04-04 23:26:30 +02:00
# define PRINTER_EVENT_LEDS
# endif
2015-05-15 00:45:54 +02:00
/*********************************************************************\
* R / C SERVO support
* Sponsored by TrinityLabs , Reworked by codexmas
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
// Number of servos
//
// If you select a configuration below, this will receive a default value and does not need to be set manually
// set it manually if you have more servos than extruders and wish to manually control some
// leaving it undefined or defining as 0 will disable the servo subsystem
// If unsure, leave commented / disabled
//
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
2017-01-01 17:19:33 +01:00
// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
2016-06-23 23:33:29 +02:00
// 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it.
2017-08-11 23:21:39 +02:00
# define SERVO_DELAY { 300 }
2016-06-23 23:33:29 +02:00
2015-07-16 01:08:26 +02:00
// Servo deactivation
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE
2017-04-05 01:06:19 +02:00
/**
* Filament Width Sensor
*
* Measures the filament width in real - time and adjusts
* flow rate to compensate for any irregularities .
*
* Also allows the measured filament diameter to set the
* extrusion rate , so the slicer only has to specify the
* volume .
*
* Only a single extruder is supported at this time .
*
* 34 RAMPS_14 : Analog input 5 on the AUX2 connector
* 81 PRINTRBOARD : Analog input 2 on the Exp1 connector ( version B , C , D , E )
* 301 RAMBO : Analog input 3
*
* Note : May require analog pins to be defined for other boards .
*/
2016-03-30 05:28:23 +02:00
//#define FILAMENT_WIDTH_SENSOR
2015-05-15 00:45:54 +02:00
2017-04-05 01:06:19 +02:00
# define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
2015-05-15 00:45:54 +02:00
2016-03-30 05:28:23 +02:00
# if ENABLED(FILAMENT_WIDTH_SENSOR)
2017-04-05 01:06:19 +02:00
# define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
# define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
2016-03-10 11:41:37 +01:00
2017-04-05 01:06:19 +02:00
# define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading
# define MEASURED_LOWER_LIMIT 1.90 // (mm) Lower limit used to validate sensor reading
# define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
2015-05-15 00:45:54 +02:00
2017-04-05 01:06:19 +02:00
# define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
2016-03-10 11:41:37 +01:00
2017-04-05 01:06:19 +02:00
// Display filament width on the LCD status line. Status messages will expire after 5 seconds.
2016-03-10 11:41:37 +01:00
//#define FILAMENT_LCD_DISPLAY
# endif
2015-05-15 00:45:54 +02:00
2016-07-26 08:04:19 +02:00
# endif // CONFIGURATION_H