Marlin-Artillery-M600/Marlin/pins_MKS_BASE.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
 *
 * Rev B - Override pin definitions for CASE_LIGHT and M3/M4/M5 spindle control
 */

#if HOTENDS > 2 || E_STEPPERS > 2
  #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif

#define BOARD_NAME "MKS BASE 1.0"

//
// Heaters / Fans
//
// Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7

#define CASE_LIGHT_PIN            2

//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN     2  // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15  // Pin should have a pullup!
#define SPINDLE_DIR_PIN          19

#include "pins_RAMPS.h"
-												Further cleanup of comments, partial Doxygen-style

Following up on #3231

											
										
										
											2016-03-25 07:19:46 +01:00
+								/**
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 19:01:20 +01:00
+								 * Marlin 3D Printer Firmware
 								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 								 *
 								 * Based on Sprinter and grbl.
 								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 								 *
 								 * This program is free software: you can redistribute it and/or modify
 								 * it under the terms of the GNU General Public License as published by
 								 * the Free Software Foundation, either version 3 of the License, or
 								 * (at your option) any later version.
 								 *
 								 * This program is distributed in the hope that it will be useful,
 								 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 								 * GNU General Public License for more details.
 								 *
 								 * You should have received a copy of the GNU General Public License
 								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 								 *
 								 */
-												Support for MKS BASE 1.0 board

											
										
										
											2015-05-09 04:07:37 +02:00
+								/**
 								 * MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
-												SPINDLE/LASER pins changes

											
										
										
											2017-04-07 20:52:21 +02:00
+								 *
 								 * Rev B - Override pin definitions for CASE_LIGHT and M3/M4/M5 spindle control
-												Support for MKS BASE 1.0 board

											
										
										
											2015-05-09 04:07:37 +02:00
+								 */
-												Patch pins files hotends/e-steppers sanity check

											
										
										
											2017-04-07 00:15:09 +02:00
+								#if HOTENDS > 2 || E_STEPPERS > 2
 								  #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
-												Consolidate setting of RAMPS High Voltage PWM outputs

											
										
										
											2016-07-30 01:13:19 +02:00
+								#endif
-												Add "About Printer" information menu.

Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.

											
										
										
											2016-06-30 11:24:29 +02:00
+								#define BOARD_NAME "MKS BASE 1.0"
-												Follow-up the PR #4955, etc

・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing

											
										
										
											2016-10-08 22:27:04 +02:00
+								//
 								// Heaters / Fans
 								//
-												Boards with 4 power outputs are EFBF or EFBE

											
										
										
											2016-08-02 21:32:36 +02:00
+								// Power outputs EFBF or EFBE
-												HI_VOLT_PIN => "RAMPS_Dn_PIN"

											
										
										
											2016-07-30 14:32:00 +02:00
+								#define MOSFET_D_PIN 7
-												Support for MKS BASE 1.0 board

											
										
										
											2015-05-09 04:07:37 +02:00
-												SPINDLE/LASER pins changes

											
										
										
											2017-04-07 20:52:21 +02:00
+								#define CASE_LIGHT_PIN            2
 								//
 								// M3/M4/M5 - Spindle/Laser Control
 								//
 								#define SPINDLE_LASER_PWM_PIN     2  // MUST BE HARDWARE PWM
 								#define SPINDLE_LASER_ENABLE_PIN 15  // Pin should have a pullup!
 								#define SPINDLE_DIR_PIN          19
 								#include "pins_RAMPS.h"