Marlin-Artillery-M600/Marlin/src/pins/ramps/pins_FELIX2.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
 */

#if HOTENDS > 2 || E_STEPPERS > 2
  #error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif

#define BOARD_INFO_NAME "Felix 2.0+"

//
// Heaters / Fans
//
// Power outputs EFBF or EFBE
#define MOSFET_D_PIN        7

#include "pins_RAMPS.h"

//
// Misc. Functions
//
#define SDPOWER_PIN         1

#define PS_ON_PIN          12

//
// LCD / Controller
//
#if BOTH(ULTRA_LCD, NEWPANEL)

  #define SD_DETECT_PIN     6

#endif // NEWPANEL && ULTRA_LCD

//
// M3/M4/M5 - Spindle/Laser Control
//
#undef SPINDLE_LASER_PWM_PIN     // Definitions in pins_RAMPS.h are not valid with this board
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 07:19:46 +01:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`* Marlin 3D Printer Firmware`
Tweaky change from (C) to (c) 2019-06-28 06:57:50 +02:00			`* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`*`
			`* Based on Sprinter and grbl.`
Tweaky change from (C) to (c) 2019-06-28 06:57:50 +02:00			`* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`
Add include guards to some headers 2019-07-05 05:44:12 +02:00			`#pragma once`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00
Updated PR to streamline integration 2015-03-02 10:49:45 +01:00			`/**`
Base RAMPS-like boards on RAMPS 1.4 2016-02-29 08:13:50 +01:00			`* FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments`
Updated PR to streamline integration 2015-03-02 10:49:45 +01:00			`*/`
Added support for Felix 2.0/3.0 printers 2015-03-01 10:16:55 +01:00
Patch pins files hotends/e-steppers sanity check 2017-04-07 00:15:09 +02:00			`#if HOTENDS > 2 \|\| E_STEPPERS > 2`
			`#error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue."`
Consolidate setting of RAMPS High Voltage PWM outputs 2016-07-30 01:13:19 +02:00			`#endif`

Prevent BOARD_NAME conflict with env 2019-08-21 02:08:58 +02:00			`#define BOARD_INFO_NAME "Felix 2.0+"`
Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 11:24:29 +02:00
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`//`
			`// Heaters / Fans`
			`//`
Boards with 4 power outputs are EFBF or EFBE 2016-08-02 21:32:36 +02:00			`// Power outputs EFBF or EFBE`
Cosmetic pins changes 2018-08-04 00:02:59 +02:00			`#define MOSFET_D_PIN 7`
Added support for Felix 2.0/3.0 printers 2015-03-01 10:16:55 +01:00
pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 12:10:30 +02:00			`#include "pins_RAMPS.h"`
Cleanup pins in RAMPS_13_EFB boards 2015-05-23 01:20:54 +02:00
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`//`
			`// Misc. Functions`
			`//`
SDPOWER => SDPOWER_PIN 2019-08-02 09:19:39 +02:00			`#define SDPOWER_PIN 1`
Added support for Felix 2.0/3.0 printers 2015-03-01 10:16:55 +01:00
			`#define PS_ON_PIN 12`

Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`//`
			`// LCD / Controller`
			`//`
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) \|\| PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)` 2019-03-17 05:43:06 +01:00			`#if BOTH(ULTRA_LCD, NEWPANEL)`
Added support for Felix 2.0/3.0 printers 2015-03-01 10:16:55 +01:00
Cosmetic pins changes 2018-08-04 00:02:59 +02:00			`#define SD_DETECT_PIN 6`
Added support for Felix 2.0/3.0 printers 2015-03-01 10:16:55 +01:00
Updated PR to streamline integration 2015-03-02 10:49:45 +01:00			`#endif // NEWPANEL && ULTRA_LCD`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00
			`//`
			`// M3/M4/M5 - Spindle/Laser Control`
			`//`
			`#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board`
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-09 00:52:33 +02:00			`#undef SPINDLE_LASER_ENA_PIN`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`#undef SPINDLE_DIR_PIN`