Update comments re: NOZZLE_AS_PROBE
This commit is contained in:
Scott Lahteine
parent
832321f55d
commit
00c83e9ca6
272 changed files with 544 additions and 272 deletions
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -936,7 +936,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -949,7 +949,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -993,7 +993,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -993,7 +993,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1439,7 +1439,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -940,7 +940,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
//#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
//#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -983,7 +983,8 @@
|
|||
// (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis)
|
||||
//#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -942,7 +942,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -940,7 +940,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -941,7 +941,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -930,7 +930,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1442,7 +1442,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -917,7 +917,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -930,7 +930,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1446,7 +1446,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -917,7 +917,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -921,7 +921,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -922,7 +922,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -928,7 +928,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -930,7 +930,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -948,7 +948,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -927,7 +927,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 21, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -931,7 +931,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -910,7 +910,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -910,7 +910,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -921,7 +921,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1437,7 +1437,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -935,7 +935,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1014,7 +1014,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -958,7 +958,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1442,7 +1442,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -941,7 +941,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1442,7 +1442,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -911,7 +911,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -912,7 +912,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -913,7 +913,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -944,7 +944,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 8
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -936,7 +936,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1437,7 +1437,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -950,7 +950,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -950,7 +950,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -949,7 +949,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -918,7 +918,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 20
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1430,7 +1430,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -936,7 +936,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1443,7 +1443,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -941,7 +941,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -936,7 +936,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1443,7 +1443,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -953,7 +953,8 @@
|
|||
// Note: HoolyHoo mount is X=35, Y=-50.
|
||||
//#define NOZZLE_TO_PROBE_OFFSET { 35, -50, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -933,7 +933,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -930,7 +930,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -936,7 +936,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -935,7 +935,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -928,7 +928,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1439,7 +1439,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -928,7 +928,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -937,7 +937,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -937,7 +937,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -937,7 +937,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -969,7 +969,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -927,7 +927,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -950,7 +950,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -951,7 +951,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1435,7 +1435,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -931,7 +931,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -931,7 +931,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -960,7 +960,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -913,7 +913,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 32, 5, -1.3 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -980,7 +980,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 50
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -950,7 +950,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -940,7 +940,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -938,7 +938,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -958,7 +958,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1451,7 +1451,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -948,7 +948,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -939,7 +939,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -940,7 +940,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -929,7 +929,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1092,7 +1092,8 @@
|
|||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
#endif
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 15
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1036,7 +1036,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 5
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1439,7 +1439,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1048,7 +1048,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 5
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1038,7 +1038,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 20
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1041,7 +1041,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 20
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1040,7 +1040,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 20
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1040,7 +1040,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1028,7 +1028,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1043,7 +1043,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1027,7 +1027,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1032,7 +1032,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.10 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 20
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1028,7 +1028,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1034,7 +1034,8 @@
|
|||
//BL Touch with John Ecker Custom Mount
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 1
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1030,7 +1030,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -1029,7 +1029,8 @@
|
|||
* not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
|
||||
*/
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1031,7 +1031,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1440,7 +1440,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -942,7 +942,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 45
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -932,7 +932,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -924,7 +924,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1438,7 +1438,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
|
|
@ -934,7 +934,8 @@
|
|||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
|
|
|
|||
|
|
@ -1439,7 +1439,8 @@
|
|||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
|
|
|
|||
Reference in a new issue